Skip header and navigation

Narrow Results By

128 records – page 2 of 7.

Date
1931 – 1942
Material
metal; glass;
Catalogue Number
104.41.0214
Description
Ernst Leitz Wetzlar Hektor f=7,3 cm 1:1,9 lens with hood and lens cap in a metal tube case. The lens cap has Leica engraved on it - the case has the manufacturer name and the lens size stamped on the lid, which slides up off the tube.
  1 image  
Title
Camera Lens
Date
1931 – 1942
Material
metal; glass;
Dimensions
8.6 cm
Description
Ernst Leitz Wetzlar Hektor f=7,3 cm 1:1,9 lens with hood and lens cap in a metal tube case. The lens cap has Leica engraved on it - the case has the manufacturer name and the lens size stamped on the lid, which slides up off the tube.
Subject
camera equipment
photography
photography equipment
camera accessories;
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.41.0214
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1949
Material
wood; metal; plastic
Catalogue Number
104.41.0100
Description
Wood and metal Thalhammer camera tripod with metal spikes at the end of the legs, brackets at various points along the legs, and camera mount. The tripod is retracted to its shortest setting, but can double in height. Each leg has an adjustable metal bracket with circular knobs on the outside of th…
  1 image  
Title
Camera Tripod
Date
1930 – 1949
Material
wood; metal; plastic
Dimensions
88.8 cm
Description
Wood and metal Thalhammer camera tripod with metal spikes at the end of the legs, brackets at various points along the legs, and camera mount. The tripod is retracted to its shortest setting, but can double in height. Each leg has an adjustable metal bracket with circular knobs on the outside of the leg - the flat part of the knob features a kneeling man holding the handle of a long hammer in front of him, with his hands above his head just below the head of the hammer. This same logo is featured throughout other metal pieces around the head of the tripod. A plastic-handled grip is attached to the top of the tripod. Four circular pieces of paper screwed onto the camera support base, possibly as spacers, upon removal the Thalhammer company information is shown.
Subject
Nicholas Morant
photography
camera equipment
camera tripod;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0100
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
c. 1915
Material
metal; glass; skin
Catalogue Number
104.44.1013 a-c
Description
3 prismatic compasses, olive-drab painting on the body, military issue, marked: “U.S.E.D. CREAGH-OSBORNE MARCHING COMPASS. MARK VII. MOD.E. SPERRY GYROSCOPE CO. BROOKLYN, N.Y. In leather carrying cases. “Captain Frank Osborne Creagh-Osborne, Royal Navy, (1867/1943) was Superintendent of Compasses …
  1 image  
Title
Compass
Date
c. 1915
Material
metal; glass; skin
Dimensions
9.0 x 7.0 cm
Description
3 prismatic compasses, olive-drab painting on the body, military issue, marked: “U.S.E.D. CREAGH-OSBORNE MARCHING COMPASS. MARK VII. MOD.E. SPERRY GYROSCOPE CO. BROOKLYN, N.Y. In leather carrying cases. “Captain Frank Osborne Creagh-Osborne, Royal Navy, (1867/1943) was Superintendent of Compasses with the British Admiralty and inventor. His various inventions were built by H. Hughes & Son Ltd, Dent & Co & Johnson Ltd, Sperry Gyroscopes Co., etc. There exist two versions of a sturdy and heavy LENSATIC marching compass made by SPERRY GYROSCOPE Co. BROOKLYN N.Y.” “MARK VII MOD.E. Technical Data: - Foldable rifle-type sighting system- Adjustable lense- Case: brass- Dimensions: 85 x 60 x 32 mm- Weight: 230 gr- Fluid damped compass card”Quoted material from: http://www.compassmuseum.com/hand/hand_2.htm
Subject
photography
Vaux family
surveying
science
sports
hiking
military
Credit
Gift of Molly Vaux, New York, USA, 1999
Catalogue Number
104.44.1013 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1915 – 1930
Material
glass; metal; wood
Catalogue Number
104.41.1006 a,b
Description
Two small wood frames with glass and metal pressure holders at the back.
  1 image  
Title
Contact-Printing Frame
Date
1915 – 1930
Material
glass; metal; wood
Description
Two small wood frames with glass and metal pressure holders at the back.
Subject
households
hobbies
photography
Credit
Gift of L. A. E Duncan, Calgary, 1984
Catalogue Number
104.41.1006 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1910 – 1930
Material
wood, metal
Catalogue Number
104.41.1018 a-e
Description
5 pieces dark oak; photographic stand parts; solid wood 2.0 cm thick; (a) 56.0x56.0 with a 53.5x13.0 ledge at an angle; a 5.0 bar across back; inset into front is (b) 35.5x35.5, has 4 metal'shoes' 2 round 4.5 diameter and 2 square, open one side; slides under 2metal bars on (a); (c) 13.0x56…
  1 image  
Title
Copy Stand Parts
Date
1910 – 1930
Material
wood, metal
Description
5 pieces dark oak; photographic stand parts; solid wood 2.0 cm thick; (a) 56.0x56.0 with a 53.5x13.0 ledge at an angle; a 5.0 bar across back; inset into front is (b) 35.5x35.5, has 4 metal'shoes' 2 round 4.5 diameter and 2 square, open one side; slides under 2metal bars on (a); (c) 13.0x56.0 part of drawer, with lock one end and brasshandle centered;(d) 7.6x63.0, 2 holes each end; (e) 58.0x5.0; wedge shaped with nipple one end.
Subject
photography
Credit
Gift of Unknown, 1968
Catalogue Number
104.41.1018 a-e
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Developer Liquid Measure

https://archives.whyte.org/en/permalink/artifact104.41.1161
Date
1874
Catalogue Number
104.41.1161
Description
A metal 24 ounce measuring jug with handle. The measuring jug has a slight lip for easy pouring. The scale has been inscribed on the inside of the measuring jug and contains both ounces and cubic centimeters or milliliters symbolized by “c.c.” The scale representing ounces begins at 2 ounces and i…
  1 image  
Title
Developer Liquid Measure
Date
1874
Description
A metal 24 ounce measuring jug with handle. The measuring jug has a slight lip for easy pouring. The scale has been inscribed on the inside of the measuring jug and contains both ounces and cubic centimeters or milliliters symbolized by “c.c.” The scale representing ounces begins at 2 ounces and increases in 2 ounce increments to 24 ounces. The cubic centimeter scale begins at 100 c.c. and increases in increments of 100 c.c. to 700 c.c. and then by 50 c.c. more to 750. The bottom of the measuring jug has an inscription that reads: “Vollrath” in cursive writing followed by “STAINLESS STEEL WARE” “8324” all in upper case letters. Vollrath is a manufacturer of stainless steel and aluminum parts and products for food service and custom uses.
Subject
dark room
photography
Nick Morant
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.1161
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
plastic
Catalogue Number
104.41.1059
Description
Black plastic developing tank; black plastic cylinder with detachable lid; 6 groups of 4 ridges running the height of cylinder; lip surrounding opening at top; "PLANO" printed in relief on lid; 2 oblong holes to correspond to tongues on bottom section; olive colour spool with near spaced thread att…
  1 image  
Title
Developing Tank
Date
1930 – 1950
Material
plastic
Dimensions
12.0 x 12.4 cm
Description
Black plastic developing tank; black plastic cylinder with detachable lid; 6 groups of 4 ridges running the height of cylinder; lip surrounding opening at top; "PLANO" printed in relief on lid; 2 oblong holes to correspond to tongues on bottom section; olive colour spool with near spaced thread attached to lid with finger knob coming through to outside.
Subject
photography
Credit
Gift of Robert N. Smith, Canmore, 1985
Catalogue Number
104.41.1059
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
c. 1900
Material
ceramic; enamel
Catalogue Number
104.41.0272
Description
A white tray with different coloured speckles all over with a pouring spout at one corner. On the side with the pouring spout is a stamp that reads “GRANITINE” in an outer ring of a circle with a symbol or logo in the middle.
  1 image  
Title
Developing Tray
Date
c. 1900
Material
ceramic; enamel
Dimensions
4.9 x 15.0 x 21.5 cm
Description
A white tray with different coloured speckles all over with a pouring spout at one corner. On the side with the pouring spout is a stamp that reads “GRANITINE” in an outer ring of a circle with a symbol or logo in the middle.
Subject
film photography
photography
photography accessory
Granitine
darkroom
Moore
Credit
Gift of Pearl Evelyn Moore, Banff, 1977
Catalogue Number
104.41.0272
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1890 – 1910
Material
metal
Catalogue Number
110.02.1011
Description
Metal tube with lid and paper label reading: “Glaciers. From Will’s office. 2/4. 1909.” Contained 3 drawings on linen (now in Archives Inventory 2014 ).
Title
Document Tube
Date
1890 – 1910
Material
metal
Dimensions
4.0 x 35.5 cm
Description
Metal tube with lid and paper label reading: “Glaciers. From Will’s office. 2/4. 1909.” Contained 3 drawings on linen (now in Archives Inventory 2014 ).
Subject
Vaux family
William S. Vaux Jr.
photography
glaciology
Credit
Gift of Molly Vaux, New York, USA, 1999
Catalogue Number
110.02.1011
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1950
Material
metal
Catalogue Number
104.41.1067
Description
Metal press with handle, electrical cord (220). Three brass hinged mounting plates, 3 sizes.
  1 image  
Title
Dry Mounting Press
Date
prior to 1950
Material
metal
Description
Metal press with handle, electrical cord (220). Three brass hinged mounting plates, 3 sizes.
Subject
photography
Byron Harmon
Credit
Gift of Don Harmon, Banff, 1994
Catalogue Number
104.41.1067
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1970
Material
wood; metal, copper
Catalogue Number
104.43.1005
Description
A rectangle of wood with a metal plate attached. The copper plate has an image on it.This item was transferred to the Archives by SS in May/June 2014.
  1 image  
Title
Engraving Plate
Date
1930 – 1970
Material
wood; metal, copper
Description
A rectangle of wood with a metal plate attached. The copper plate has an image on it.This item was transferred to the Archives by SS in May/June 2014.
Subject
photography
Credit
Gift of Arthur Oliver Wheeler, 1975
Catalogue Number
104.43.1005
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1915 – 1930
Material
metal; wood
Catalogue Number
104.43.1012
Description
16 copper engraving plates mounted on wooden blocks in cardboard box marked in pencil: “Copper negatives of Camping trips CBH.” 10 of the plates have images of camping, mountain scenes, trail riding, etc. 6 of the plates have images which appear to be from the Middle East - desert scenes, camels, e…
  1 image  
Title
Engraving Plate
Date
1915 – 1930
Material
metal; wood
Dimensions
2.5 x 6.0 x 10.0 cm
Description
16 copper engraving plates mounted on wooden blocks in cardboard box marked in pencil: “Copper negatives of Camping trips CBH.” 10 of the plates have images of camping, mountain scenes, trail riding, etc. 6 of the plates have images which appear to be from the Middle East - desert scenes, camels, etc. Some blocks are labeled “Hinman” or “Mrs. Hinman” and two are labeled “Smith.”These items were transferred to the Archives by SS in May/June 2014.
Subject
Vaux family
photography
Caroline Borden Hinman
Credit
Gift of Molly Vaux, New York, USA, 1999
Catalogue Number
104.43.1012
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1890 – 1910
Material
wood; metal; paper
Catalogue Number
104.43.1011
Description
Two metal engraving plates mounted on wooden blocks. a) has image of mountain scene with glacier. Written on back of block: “Last Cut. 1501. William S. Vaux Jr. 1715 Arch St. Philada.” b) has paper label affixed to back of block: “American [?] Glacier,” handwritten on side of block: “Asulkan Glacie…
  1 image  
Title
Engraving Plate
Date
1890 – 1910
Material
wood; metal; paper
Dimensions
2.5 x 12.0 x 18.0 cm
Description
Two metal engraving plates mounted on wooden blocks. a) has image of mountain scene with glacier. Written on back of block: “Last Cut. 1501. William S. Vaux Jr. 1715 Arch St. Philada.” b) has paper label affixed to back of block: “American [?] Glacier,” handwritten on side of block: “Asulkan Glacier” and front has image of mountain with glacier and rocks. Stamped on side of block: “Electro Light Engraving Co. New York.”
Subject
Vaux family
photography
William S. Vaux Jr.
glaciology
Credit
Gift of Molly Vaux, New York, USA, 1999
Catalogue Number
104.43.1011
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
wood; metal; plastic; glass;
Catalogue Number
104.41.0163
Description
Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger su…
  1 image  
Title
Enlarger
Date
1930 – 1950
Material
wood; metal; plastic; glass;
Dimensions
105.0 x 44.5 x 55.7 cm
Description
Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger support to move up and down the support arm. The enlarger itself consists of a shiny metal dome with a fabric-wrapped power cord coming out the top [most likely the house for the light source] mounted on top of the grey metal frame [to which the enlarger support is attached] and into which several different negative trays can be fit, below the frame are dark grey fabric bellows that can be adjusted along a set of metal poles, the bottom of the bellows are attached to a smaller grey metal frame that also houses the focussing lens and a coloured filter that can be rotated in and out of frame.
Subject
Nicholas Morant
photography
photograph equipment
camera equipment
darkroom
photograph developing;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0163
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1897 – 1915
Material
wood; brass; cloth; glass
Catalogue Number
104.41.1021 a-c
Description
Enlarging view camera with two backs; mahogany wood construction; rubberized cloth bellows; some brass fittings;front piece rides on track; brass knob on side moves lens mounting plate; 2 pieces for tracks tightening wood knob; slots for glass plates behind hinged door; one plate clear glass, one p…
  1 image  
Title
Enlarging Camera
Date
1897 – 1915
Material
wood; brass; cloth; glass
Dimensions
61.0 x 56.4 x 46.0 cm
Description
Enlarging view camera with two backs; mahogany wood construction; rubberized cloth bellows; some brass fittings;front piece rides on track; brass knob on side moves lens mounting plate; 2 pieces for tracks tightening wood knob; slots for glass plates behind hinged door; one plate clear glass, one plate frosted glass; large slot for backs to slide in; two backs: one 42.3 x 33.1; other 59.9 x 41.9; the smaller back has two black slides, sheet frosted glass, cardboard divider; larger back has an area in centre with piece of glass with clips; carpet nailed around edges of slot and also perimeter of back piece; manufacturer's name plate loose.
Subject
photography
Byron Harmon
Credit
Gift of Don Harmon, Banff, 1966
Catalogue Number
104.41.1021 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1960
Material
paper; cardboard; wood;
Catalogue Number
104.51.1003
Description
Square manilla envelope with one wooden square and one cardboard square with unknown purposes inside. The envelope has “Peter Whyte” written in cursive above “1.60” written in pencil - “9203” is stamped in black in the middle. The wooden square has a hole drilled in the middle and angled edges, mak…
  1 image  
Title
Envelope
Date
1930 – 1960
Material
paper; cardboard; wood;
Dimensions
0.5 x 11.9 x 11.9 cm
Description
Square manilla envelope with one wooden square and one cardboard square with unknown purposes inside. The envelope has “Peter Whyte” written in cursive above “1.60” written in pencil - “9203” is stamped in black in the middle. The wooden square has a hole drilled in the middle and angled edges, making one side a slightly smaller square than the other, and there are two small pieces of white adhesive tape, one of which has random letters and numbers typed on it [possibly a spacer for a tripod]. The cardboard square has a small hole poked in the middle and blocked off on one side with what appears to be tinfoil taped down with several layers of red adhesive tape.
Subject
photography
Peter Whyte;
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.51.1003
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1933 – 1949
Material
plastic; paint; leather; metal; fabric
Catalogue Number
104.41.1123 a-b
Description
(a)Gossen Lunasix exposure and colour meter in a pear shape with leather case. The light meter device measures the amount of light that is appropriate to achieve the proper exposure, indicating for the users which shutter speed and f-number should be selected. Along the top of the exposure meter in…
  1 image  
Title
Exposure Meter
Date
1933 – 1949
Material
plastic; paint; leather; metal; fabric
Dimensions
(a)2.5; (b)04.5 x (a)6.5; (b)7.5 x (a)11.5; (b)12.0 cm
Description
(a)Gossen Lunasix exposure and colour meter in a pear shape with leather case. The light meter device measures the amount of light that is appropriate to achieve the proper exposure, indicating for the users which shutter speed and f-number should be selected. Along the top of the exposure meter in the viewer left corner is a white bulb-like part next to an open circular window that measures the amount of light present in the scene. When the converter slide, located along the viewer right side, is moved to the right and clicked into position the round window is open and ready to read the scene. At the top, on the face of the meter, the light measurement (scale) is present. This shows how much light is present in the scene and directly relates to the remaining scales on the meter. Below the light scale is a plexiglass film-speed setting disc with grooves that allow the operator to easily move the dial. In the middle of the dial there is the Lunasix manufacturer symbol. On viewer left side of this emblem is the DIN exposure index of the film in use; on the proper right side of this emblem is the ASA exposure index of the film in use. By moving the dial one adjusts the film-speed setting, which is indicated in the DIN and ASA boxes, whereby the index number is lined up against the triangular white marker in the respective window. A manual would have originally been sold with the object giving a more comprehensive overview of the film-speed table with a technical appendix. On the rear of the object in the viewer right corner one will see the correct position of the 2 batteries indicated through a tiny diagram. Below this is a metal battery chamber. Below this are the words “2 Batt. Mallory” “PX 625 o. PX 13”. To the viewer left of this writing is the ridged slide used for battery testing. Above the ridged slide are the words “Batt. Contr.” with a solid arrow below. Below the battery information is the table of footcandle (LUX) equivalents. In the middle of the table is the zero adjustable screw with an arrow pointing in both directions. AT the very bottom painted on the surface is the location of manufacturing; “GERMANY (WEST)” above a cutout window revealing the patent number; “4D01673”. (b) There is also a black leather case with the object. The inside of the case has gray suede lining, which would have helped avoid scratching and marking of the meter. The case has been carefully designed to retrofit the meter, which is apparent through the tiny leather strap present when the case is opened. These designs allow the object to be formly held into place further safeguarding it. At the bottom of the case there is a black button that allows the case to be opened and fastened shut. When the case is fastened shut, the name of the manufacturer “Gossen” appears imprinted and is upside down. Below this, also upside down, “LUNASIX 3” has been applied in silver ink. Along the viewer right side the case has a cutout that perfectly fit the converter slide. On the rear “MADE IN GERMANY” appears in a receded box with protruding lettering. The bottom of the case, where the button is located, contains an opening for the black string to be strung through. The string, which has been tied to the exposure meter, measures 49.0 cm and has a metal piece holding the ends of the string in place. This would have given the user greater security when working with the exposure meter.
Subject
photography
Nick Morant
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.1123 a-b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1890 – 1900
Material
cardboard;
Catalogue Number
110.01.0293 a-c
Description
Three empty boxes for one Transparent Film Cartridge meant to be used in the Kodak No. 2 Bullet Camera - each cartridge could take twelve 3 1/2 inch exposures. Each box has a black and white paper label adhered across the top of the lid with the product and manufacturer details printed throughout -…
  1 image  
Title
Film Box
Date
1890 – 1900
Material
cardboard;
Dimensions
3.8 x 4.0 x 10.3 cm
Description
Three empty boxes for one Transparent Film Cartridge meant to be used in the Kodak No. 2 Bullet Camera - each cartridge could take twelve 3 1/2 inch exposures. Each box has a black and white paper label adhered across the top of the lid with the product and manufacturer details printed throughout - on the bottom is a white and red paper label with a warning to develop the film before May 1st, 1900. All three boxes have various kinds of writing throughout the exteriors - two have notes written on one long side in pencil by Russell Robb [most likely Catharine’s father].
Subject
photography
photographic developing
film
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
110.01.0293 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1960
Material
cardboard; metal;
Catalogue Number
110.01.0294 a-c
Description
Three empty boxes for 16 mm Cine-Kodak Kodachrome and Panchromatic Safety Films. Two boxes have the empty metal film reels inside. The exteriors of the boxes are covered in product and manufacturer details and, on the back, are shipping details for when the film has been developed - two are address…
  1 image  
Title
Film Box
Date
1930 – 1960
Material
cardboard; metal;
Dimensions
2.7 x 9.8 x 9.8 cm
Description
Three empty boxes for 16 mm Cine-Kodak Kodachrome and Panchromatic Safety Films. Two boxes have the empty metal film reels inside. The exteriors of the boxes are covered in product and manufacturer details and, on the back, are shipping details for when the film has been developed - two are addressed from Peter Whyte in Banff and one is addressed from “MRS PETER WHYTE” in Concord.
Subject
photography
moving pictures
film development;
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
110.01.0294 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1980
Material
leather; metal; wood; paper
Catalogue Number
104.41.0093 a-h
Description
Hard-sided black carry case with a hinged lid and unlined wooden interior. All corners are capped with metal, mostly rusted - three metal latches are also extensively rusted (the centre one is a lock latch). Running along the length of the lid and the bottom of the case are two parallel wooden runn…
  1 image  
Title
Film Case
Date
1930 – 1980
Material
leather; metal; wood; paper
Dimensions
22.3 x 21.2 x 62.4 cm
Description
Hard-sided black carry case with a hinged lid and unlined wooden interior. All corners are capped with metal, mostly rusted - three metal latches are also extensively rusted (the centre one is a lock latch). Running along the length of the lid and the bottom of the case are two parallel wooden runners. Also on the lid is a hard leather handle attached to the lid with metal loops - attached to both handle loops are several remnants of paper tags and a leather travel tag with a clear plastic window. Visible through the window is a stained paper tag that reads “N Morant Special Photographer Public Relations and Advertising Canadian Pacific Banff, Alberta.” Inside the lid is a “NATIONAL FILM BOARD OF CANADA Exposed Negative” card depicting a woman in a pale green bikini. Drawn on the inside of the lid in black, yellow, and red is a caricature of a face with a thought bubble that reads “AUNT MARTHA LIKES THIS ONE.” The exterior of the case is covered in faded and torn travel stickers and labels, there is also “D7” spray painted in yellow on the lid under the handle, on both short sides, and on the back. Inside the case are three black “KODAK HARD RUBBER TANK 4x5” containers. In one tank are two cardboard boxes - one is green and contains an Eastman timer and the other is a yellow “EASTMAN THERMOMETER” box with the thermometer inside. The second tank contains two circular metal supports for developing rolls of film negatives, a white metal Kodak film canister (empty), and a blue cardboard box with another metal film processor inside. The third tank contains a cylindrical container that has something inside of it, but it does not open.
Subject
Nicholas Morant
photography
film development
camera equipment
Canadian Pacific Railway
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0093 a-h
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

128 records – page 2 of 7.

Back to Top