Narrow Results By
- Date
- prior to 1975
- Material
- leather; wood; metal; plastic; paper
- Catalogue Number
- 104.41.0253 a-e
- Description
- A black hardshell leather camera case with gold detailing with two cut-film holders/double dark slides, a wollensak lens, and Kodak informational sheets. a) A black hardshell leather camera case with gold detailing, including three clasps with one missing the hinge and a large one in the middle wit…
1 image
- Title
- Camera Case
- Date
- prior to 1975
- Material
- leather; wood; metal; plastic; paper
- Dimensions
- 24.8 x 34.2 x 15.6 cm
- Description
- A black hardshell leather camera case with gold detailing with two cut-film holders/double dark slides, a wollensak lens, and Kodak informational sheets. a) A black hardshell leather camera case with gold detailing, including three clasps with one missing the hinge and a large one in the middle with a spot for a key to lock it. Each corner of the case features gold detailing. There is a black handle on top attached via rings. Along the shorter side are two rings, presumably to attach a longer carrying strap for the case. The interior of the case is covered in dark green velvet, with two compartments in the main body - one slightly smaller than the other, and multiple compartments in the top with coverings held by button clasps. The left side compartment is a single square and the right side has three compartments - two small squares stacked and a rectangle that features a cut-out in the covering to reveal a strip of the compartment. In the bottom of the case is a short cord photography accessory and a bent metal track for a camera(?)b & c) Two identical cut-film holders/double dark slides. They are all black film holders. The slide handles are thin metal rods in the middle of the holder. One side along the edges of the frame features stamped text which reads “3 1/4 x 4 1/4 GRAFLEX FILM S. PAT 2056144” “MADE IN U.S.A. BY GRAFLEX INC ROCHESTER, N.J.” On b) there are two stickers, one on each side, with handwriting one reads “3” and the other “B 1 W 64”. On c) there are two stickers, one on each side, with handwriting reads “5” and “B 6 W 64”. 15.4 x 10.1 x 1.3 cm d) A Wollensak 65mm Raptar Wide angle lens mounted on a black painted board. The board is square with the front having a raised layer of board and an “A” stamped into one of the corners. The inscription on the inner part of the lens reads “WOLLENSAK 65MM f/6.8 CW RAPTAR WIDE ANGLE No A553800” and aperture ring with “22” “16” “11” “8” “6.8” “f”. It comes with an orange rubber cap that reads “WOLLENSAK”. 2.8 x 7.9 x 7.9 cm [inside the top part of the lid on the left side] e) Two sheets of information sheets. A smaller one for “KODAK EKTACHROME FILM, Daylight Type” with information about emulsion number, speed, electronic flash, and colour balance. [13.3 x 11.8 cm] The larger folded sheet is for “KODAK PANATOMIC-X SHEET FILM” with information about exposure and development. One side is in english and the other in french. [26.7 x 23.8 cm] e)
- Credit
- Gift of Don Harmon, Banff, 1985
- Catalogue Number
- 104.41.0253 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1970
- Material
- plastic, metal, rubber
- Catalogue Number
- 104.41.1037 a,b
- Description
- flash head and battery unit; 2 tone body of plastic with thick rubber carrying strap; top grey half has a dial indicating power, full, 1/2, 1/4, 3/4; black coiled cord with a 4 prong female connector; black bottom is of plastic and holds 2 225 volt batteries; flash head is thin metal with a plasti…
1 image
- Title
- Camera Flash
- Date
- 1950 – 1970
- Material
- plastic, metal, rubber
- Description
- flash head and battery unit; 2 tone body of plastic with thick rubber carrying strap; top grey half has a dial indicating power, full, 1/2, 1/4, 3/4; black coiled cord with a 4 prong female connector; black bottom is of plastic and holds 2 225 volt batteries; flash head is thin metal with a plastic cover; clear plastic over reflector; 2 prong female connector, probably for connecting other units in series; opposite is a 4 prong male connector which hooks up with cord; rubber connector for handle or stand; 2 Mallory 225 volt batteries inside; (a) light: 13.0 long x 14.0 diameter; (b) battery pack: 20.0 x 22.5 x 11.4.
- Credit
- Gift of Banff Camera Shop Ltd., Banff, 1986
- Catalogue Number
- 104.41.1037 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1955 – 1970
- Material
- rubber; plastic; metal; glass; dry-cell battery
- Catalogue Number
- 104.41.1256
- Description
- black and light green grey trapezoid power pack case with a riveted black rubber strap with top handle cut; metal plaque on one side with Strobo Research logo [lightning shaped red “S” over black “R”]: “STROBOFLASH II’ and red letters: “MADE IN U.S.A. BY GRAFLEX, INC., ROCHESTER, N.Y.”; black coil …
1 image
- Title
- Camera Flash
- Date
- 1955 – 1970
- Material
- rubber; plastic; metal; glass; dry-cell battery
- Dimensions
- 16.5 x 17.0 cm
- Description
- black and light green grey trapezoid power pack case with a riveted black rubber strap with top handle cut; metal plaque on one side with Strobo Research logo [lightning shaped red “S” over black “R”]: “STROBOFLASH II’ and red letters: “MADE IN U.S.A. BY GRAFLEX, INC., ROCHESTER, N.Y.”; black coil cord; attached to flash light; same light green grey, plug on one side; same brand metal plaque; has a 0.5 cm diameter coiled female mounting connector
- Subject
- Nicholas Morant
- photography
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1256
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1980
- Material
- leather; fabric; plastic; metal;
- Catalogue Number
- 104.41.0137
- Description
- A grey plastic handheld flash with an expandable reflective disk in a black leather box lined with dark red velvet.The flash has a hook on the bottom where it can be fitted onto a camera, an articulated head where the reflective disk is, a distance gauge on the back [it was taped into a particular …
1 image
- Title
- Camera Flash
- Date
- 1950 – 1980
- Material
- leather; fabric; plastic; metal;
- Dimensions
- 4.2 x 5.5 x 12.0 cm
- Description
- A grey plastic handheld flash with an expandable reflective disk in a black leather box lined with dark red velvet.The flash has a hook on the bottom where it can be fitted onto a camera, an articulated head where the reflective disk is, a distance gauge on the back [it was taped into a particular position with a piece of clear tape that has since come unstuck], and a green plastic cord coming out of the front of the flash just below the disk.The box has a leather hinged lid and is held closed with a snap on a leather tab.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0137
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1957 – 1957
- Material
- metal; wood; glass
- Catalogue Number
- 104.41.0105
- Description
- Large zoom camera lens mounted on a wood base. Both ends have lens caps on them, the larger one is lined with red velvet.
1 image
- Title
- Camera Lens
- Date
- 1957 – 1957
- Material
- metal; wood; glass
- Dimensions
- 20.5 x 15.3 x 44.5 cm
- Description
- Large zoom camera lens mounted on a wood base. Both ends have lens caps on them, the larger one is lined with red velvet.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0105
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1980
- Material
- metal; paper
- Catalogue Number
- 104.41.0131 a,b
- Description
- Two metal pieces with a Canadian Pacific Railway travel tag with “LEICA TANDEM THALHMER TOP” written in black ink on one side, probably by Morant. The pieces could be part of a mount used to connect two different cameras together.
1 image
- Title
- Camera Mount
- Date
- 1950 – 1980
- Material
- metal; paper
- Dimensions
- 3.0 x 12.5 x 14.5 cm
- Description
- Two metal pieces with a Canadian Pacific Railway travel tag with “LEICA TANDEM THALHMER TOP” written in black ink on one side, probably by Morant. The pieces could be part of a mount used to connect two different cameras together.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0131 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Catalogue Number
- 104.41.0081 a-d
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded suppor…
1 image
- Title
- Camera Tripod
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Dimensions
- 28.3 x 28.6 x 138.5 cm
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded supports and buckled leather straps located inside to keep the tripod in place - straps not done up at time of processing. NICHOLAS MORANT written in white along the narrow top edge on either side of carrying handle, TR1 written in yellow paint in the top left end of narrow edge and in top right corner of opening side, the torn remains on a Canadian Pacific Railway label remains on the side that does not open. Tripod: Manufacturer mark on metal support below the camera support base reads [D]INEMA EQUIPMENT CO. No manufacturer details available online. Tripod dimensions are 124.1x14.7x14.7 cm. The legs of the tripod are wood, with metal spikes at the bottoms, metal brackets, and a metal camera support rig [possibly cast iron]. The legs are held together with a buckled strip of leather at the bottom. Also in the case is a metal pole with a black plastic handle that can screw into the camera support base for use as a controller and a plastic zip-lock baggie containing a length of chain with 4 metal clasps throughout 286.0 cm in length.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0081 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1970
- Material
- metal
- Catalogue Number
- 104.41.1071
- Description
- Black metal camera tripod, legs extend in six sections to a length of 112.5 cm. Points on ends screw off.
1 image
- Title
- Camera Tripod
- Date
- prior to 1970
- Material
- metal
- Dimensions
- 25.7 cm
- Description
- Black metal camera tripod, legs extend in six sections to a length of 112.5 cm. Points on ends screw off.
- Subject
- hobbies
- photography
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.41.1071
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- leather; metal; plastic; fibre
- Catalogue Number
- 104.41.0265 a-d
- Description
- A folding safelight/lantern in a slim brown leather case.a) A slim brown leather case with a lid that wraps around the front of the case with a silver clasp in the middle. The interior of the case is lined with a white felt and a felt wrapped board to separate items in the case. b - c) Two black me…
1 image
- Title
- Candle Lamp
- Date
- prior to 1977
- Material
- leather; metal; plastic; fibre
- Dimensions
- 14.3 x 27.0 x 4.3 cm
- Description
- A folding safelight/lantern in a slim brown leather case.a) A slim brown leather case with a lid that wraps around the front of the case with a silver clasp in the middle. The interior of the case is lined with a white felt and a felt wrapped board to separate items in the case. b - c) Two black metal pieces irregular quadrilateral shapes, a stand and lid for the lantern. b) has a circle cut-out on one side (the top) and the other side there is a border around the middle - like a trench, and fits like a lid on top of the lantern screen. Along the edges of the bottom piece (c) there is a thin slot for the lantern screen to be placed. c) has a circle cut-out with a cylindrical piece sticking up on the inside. On the bottom of this piece are some narrow legs along each side and a square in the middle. b) 1.0 x 11.9 x 11.9 cm. c) 1.9 X 12.1 X 12.2 cm.e) A red lantern screen, that can be folded. On either end of the screen is black metal to stand on the metal pieces (b-c). One side features three metal snaps equally apart. The interior of the screen is black. Dimensions when folded: 25.7 x 13.0 x 0.9 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0265 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Colour Control Meter
https://archives.whyte.org/en/permalink/artifact104.41.1282%20a-d
- Date
- 1956
- Material
- metal; plastic; cord; paper; cardboard
- Catalogue Number
- 104.41.1282 a-d
- Description
- General Electric colour temperature control metre, type PC-1, in its original packaginga) black plastic rectangular body with knurled edges; translucent white dome on the front with General Electric logo printed in red in the middle; large groove in the back to insert scale cards under a metal dial…
1 image
- Title
- Colour Control Meter
- Date
- 1956
- Material
- metal; plastic; cord; paper; cardboard
- Dimensions
- 10.4 x 14.5 cm
- Description
- General Electric colour temperature control metre, type PC-1, in its original packaginga) black plastic rectangular body with knurled edges; translucent white dome on the front with General Electric logo printed in red in the middle; large groove in the back to insert scale cards under a metal dial with a cut window to read: “R/B BALANCE / FILTER TYPE / OPEN STOP”; engraved inside the groove: “ GENERAL ELECTRIC” [with the brand logo in the middle], “COLOR CONTROL METER [sic] / TYPE PC-1 / MADE IN U.S.A. / INSERT CORRECT SCALE / GEJ-2151-FOR COLOR FILM USED [sic]”; window on the top edge showing a white fixed pointer in the middle and a red mobile needle; metal plaque on the bottom edge with screw socket in the middle and two strap eyelets and number 73724 engraved; one black neckstrap attachedb) light green paper sleeve with dark green label printed: “SCALE CARDS / FOR/ G-E COLOR CONTROL METER [sic] / (Type PC-1) / These cards are used interchangeably in the PC-1. Select the one which corresponds to the type of film and filters you plan to use. See instruction book, etc.”; the brand logo is printed under the text; on the verso: “INSTRUMENT DEPARTMENT / GENERAL ELECTRIC [with logo between the two words] / WEST LYNN. MASS. / 12-54 / PRINTED IN U.S.A.”; six double-sided laminated scale cards are held inside displaying wheels for red / blue balance units, suggested filters and exposure increase in f-stops; some cards are duplicates: there are three of the type A/type B colour films, two of the type D/type F colour films, and one for daylight/Tungsten type colour filmsc) instruction manual printed in black and white; titled: “Introducing / The / Color Control Meter [sic] / type PC-1” with the General Electric logo and a picture of a hand holding the meter; twelve pages with sections: “HOW TO OPERATE / COLOR VARIATION OF LIGHT / SUGGESTIONS FOR USING THE PC-1 / HOW TO CARE FOR THE PC-1 METER / New Frontiers in Color” d) original packaging; rectangular cardboard box with lid covered in two tone green paper; rainbow colour scale along viewer’s left hand edge; labelled: “Color Control Meter / TYPE PC-1”
- Subject
- Nicholas Morant
- photography
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1282 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- c. 1915
- Material
- metal; glass; skin
- Catalogue Number
- 104.44.1013 a-c
- Description
- 3 prismatic compasses, olive-drab painting on the body, military issue, marked: “U.S.E.D. CREAGH-OSBORNE MARCHING COMPASS. MARK VII. MOD.E. SPERRY GYROSCOPE CO. BROOKLYN, N.Y. In leather carrying cases. “Captain Frank Osborne Creagh-Osborne, Royal Navy, (1867/1943) was Superintendent of Compasses …
1 image
- Title
- Compass
- Date
- c. 1915
- Material
- metal; glass; skin
- Dimensions
- 9.0 x 7.0 cm
- Description
- 3 prismatic compasses, olive-drab painting on the body, military issue, marked: “U.S.E.D. CREAGH-OSBORNE MARCHING COMPASS. MARK VII. MOD.E. SPERRY GYROSCOPE CO. BROOKLYN, N.Y. In leather carrying cases. “Captain Frank Osborne Creagh-Osborne, Royal Navy, (1867/1943) was Superintendent of Compasses with the British Admiralty and inventor. His various inventions were built by H. Hughes & Son Ltd, Dent & Co & Johnson Ltd, Sperry Gyroscopes Co., etc. There exist two versions of a sturdy and heavy LENSATIC marching compass made by SPERRY GYROSCOPE Co. BROOKLYN N.Y.” “MARK VII MOD.E. Technical Data: - Foldable rifle-type sighting system- Adjustable lense- Case: brass- Dimensions: 85 x 60 x 32 mm- Weight: 230 gr- Fluid damped compass card”Quoted material from: http://www.compassmuseum.com/hand/hand_2.htm
- Credit
- Gift of Molly Vaux, New York, USA, 1999
- Catalogue Number
- 104.44.1013 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- wood; metal; glass; felt
- Catalogue Number
- 104.41.0268 a,b
- Description
- A set of two wooden contact printing frames. a) The frame is wooden all the way around with two metal handles on the short side and long side, with black strips of metal that wrap around the handle and are inside the frame, which can be moved. On the back of the frame is an insert back that is hing…
1 image
- Title
- Contact Frame
- Date
- prior to 1977
- Material
- wood; metal; glass; felt
- Dimensions
- 21.5 x 16.5 x 2.0 cm
- Description
- A set of two wooden contact printing frames. a) The frame is wooden all the way around with two metal handles on the short side and long side, with black strips of metal that wrap around the handle and are inside the frame, which can be moved. On the back of the frame is an insert back that is hinged off center. There is grey felt on the internal side facing the glass plate, where the two strips of black metal are visible alongside two other strips of black metal in the corner of one side fixed in an L shape, each strip has a small piece of measuring tape(?). Back held in by metal clips which slide under a lip provided in frame. On the back of the frame is stamped text that reads “KODAK AUTO. MASK PRINTING FRAME” “FOR NEGATIVES” “4 X 5 3 1/4 X 5 1/2 AND SMALLER” “MADE IN U.S.A. BY” “EASTMAN KODAK CO.” “ROCHESTER, N.Y.” “T.M. REG. U.S. PAT. OFF.” There is a silver sticker with writing, “SOLE IMPORTER INTO CANADA” “CANADIAN” “KODAK CO., LIMITED” “TORONTO”. b) A wooden contact printing frame: wood frame with insert back that is hinged off center. There is white felt on the internal side facing the glass plate. Back held in by metal clips which slide under a lip provided in frame. Stamped on the back in black text which reads “EASTMAN PRINTING FRAME” “FOR 5 X 7 NEGATIVES” “EASTMAN KODAK CO., ROCHESTER, N.Y. MADE IN U.S.A.” On both long sides of the frame, back and front, are black foam strips. 20.1 x 15.2 x 2.8 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0268 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Contact-Printing Frame
https://archives.whyte.org/en/permalink/artifact104.41.1006%20a%2cb
- Date
- 1915 – 1930
- Material
- glass; metal; wood
- Catalogue Number
- 104.41.1006 a,b
- Description
- Two small wood frames with glass and metal pressure holders at the back.
1 image
- Title
- Contact-Printing Frame
- Date
- 1915 – 1930
- Material
- glass; metal; wood
- Description
- Two small wood frames with glass and metal pressure holders at the back.
- Subject
- households
- hobbies
- photography
- Credit
- Gift of L. A. E Duncan, Calgary, 1984
- Catalogue Number
- 104.41.1006 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Copy Stand Parts
https://archives.whyte.org/en/permalink/artifact104.41.1018%20a-e
- Date
- 1910 – 1930
- Material
- wood, metal
- Catalogue Number
- 104.41.1018 a-e
- Description
- 5 pieces dark oak; photographic stand parts; solid wood 2.0 cm thick; (a) 56.0x56.0 with a 53.5x13.0 ledge at an angle; a 5.0 bar across back; inset into front is (b) 35.5x35.5, has 4 metal'shoes' 2 round 4.5 diameter and 2 square, open one side; slides under 2metal bars on (a); (c) 13.0x56…
1 image
- Title
- Copy Stand Parts
- Date
- 1910 – 1930
- Material
- wood, metal
- Description
- 5 pieces dark oak; photographic stand parts; solid wood 2.0 cm thick; (a) 56.0x56.0 with a 53.5x13.0 ledge at an angle; a 5.0 bar across back; inset into front is (b) 35.5x35.5, has 4 metal'shoes' 2 round 4.5 diameter and 2 square, open one side; slides under 2metal bars on (a); (c) 13.0x56.0 part of drawer, with lock one end and brasshandle centered;(d) 7.6x63.0, 2 holes each end; (e) 58.0x5.0; wedge shaped with nipple one end.
- Subject
- photography
- Credit
- Gift of Unknown, 1968
- Catalogue Number
- 104.41.1018 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- metal; paper; cardboard; film
- Catalogue Number
- 104.41.0267 a-c
- Description
- A metal 16mm film developing reel inside a bright red box with an instruction sheet. a) A series of two metal rings with enough space between them for a 16mm film roll attached together with four metal hinges. One ring features a lip along the outer edge, and the other ring features a metal spiral …
1 image
- Title
- Developing Reel
- Date
- prior to 1977
- Material
- metal; paper; cardboard; film
- Dimensions
- 2.1 cm
- Description
- A metal 16mm film developing reel inside a bright red box with an instruction sheet. a) A series of two metal rings with enough space between them for a 16mm film roll attached together with four metal hinges. One ring features a lip along the outer edge, and the other ring features a metal spiral that starts at the center and curls outward. The center of the rings is a gap for a roll of 16mm film, which is filled with a loose roll of 16mm film with a metal bar to keep it in place. b) A bright red box with simple labels on two opposite sides of the lid. The label reads “NIKOR” “FILM DEVELOPING REEL” “FOR 16 MM” “NIKOR PRODUCTS COMPANY” “WEST SPRINGFIELD, MASS. U.S.A.” On one side of the lid and on a corner of the bottom of the box is handwritten number “645”. 2.4 x 9.5 x 9.5 cm. c) A piece of paper with instructions for the developing reel, written with a typewriter, folded in half twice. 15.8 x 17.7 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0267 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Developing Hangers
https://archives.whyte.org/en/permalink/artifact104.41.0132%20a%2cb
- Date
- 1950 – 1980
- Material
- metal
- Catalogue Number
- 104.41.0132 a,b
- Description
- Two metal Kodak film/glass plate developing hangers - one 5 x 7 and one 3 1/4 x 4 1/4.
1 image
- Title
- Developing Hangers
- Date
- 1950 – 1980
- Material
- metal
- Dimensions
- 0.5 x 7.6 x 23.8 cm
- Description
- Two metal Kodak film/glass plate developing hangers - one 5 x 7 and one 3 1/4 x 4 1/4.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0132 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Developing Powder Box
https://archives.whyte.org/en/permalink/artifact104.41.0262
- Date
- prior to 1977
- Material
- paper;
- Catalogue Number
- 104.41.0262
- Description
- An empty, blue and yellow developing powder box. The label is blue with yellow text, in a long oval shaped C encompasses text that reads “DEVELOPING ELERITAS POWDERS”, in the back of the C is blue text that reads “TRADEMAEK REG. U.S. PAT. OFF.”. Two sides of the box are identical with text that rea…
1 image
- Title
- Developing Powder Box
- Date
- prior to 1977
- Material
- paper;
- Dimensions
- 3.5 x 9.0 x 5.6 cm
- Description
- An empty, blue and yellow developing powder box. The label is blue with yellow text, in a long oval shaped C encompasses text that reads “DEVELOPING ELERITAS POWDERS”, in the back of the C is blue text that reads “TRADEMAEK REG. U.S. PAT. OFF.”. Two sides of the box are identical with text that reads “PRICE PER PACKAGE - 25 CTS.” “MANUFACTURED ONLY BY” “CHAS. L. MITCHELL, M.D.” “PHOTOGRAPHIC CHEMIST” “1016-1018 CHERRY ST., PHILADELPHIA” behind the text is a faded red circular star with “25 C (cents)”. The side opposite from the label features a blue outline of a badge with text that reads “MITCHELL’S DEVELOPERS ARE GOOD DEVELOPERS”, behind the text is a faded red circular star with some symbols inside it.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0262
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- plastic;
- Catalogue Number
- 104.41.0261 a,b
- Description
- A set of two developing trays, one a discoloured cream and the other black. a) A shallow, rectangular, discoloured cream developing tray with “kodak” in the bottom of the tray surrounded by two stripes - above and below. b) A shallow, square, black developing tray with a circle with “EKC” stamped o…
1 image
- Title
- Developing Tray
- Date
- prior to 1977
- Material
- plastic;
- Dimensions
- 2.4 x 22.0 x 15.6 cm
- Description
- A set of two developing trays, one a discoloured cream and the other black. a) A shallow, rectangular, discoloured cream developing tray with “kodak” in the bottom of the tray surrounded by two stripes - above and below. b) A shallow, square, black developing tray with a circle with “EKC” stamped on the bottom of the exterior. 3.7 x 14.5 x 17.3 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0261 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Dry Plates Box
https://archives.whyte.org/en/permalink/artifact104.41.0263
- Date
- prior to 1977
- Material
- paper
- Catalogue Number
- 104.41.0263
- Description
- A blue, empty Cramer’s Photo Dry Plates box. The label of the box is a lighter blue, with a dark blue border around the edges. The black text reads “CRAMER’S” “Photo Dry Plates.” “DIRECTIONS INSIDE.” “MANUFACTURED BY” “G. Cramer Dry Plate Co.,” “St. Louis, Mo., U.S.A.” “NEW YORK DEPOT: 93 Universit…
1 image
- Title
- Dry Plates Box
- Date
- prior to 1977
- Material
- paper
- Dimensions
- 2.8 x 11.0 x 13.8 cm
- Description
- A blue, empty Cramer’s Photo Dry Plates box. The label of the box is a lighter blue, with a dark blue border around the edges. The black text reads “CRAMER’S” “Photo Dry Plates.” “DIRECTIONS INSIDE.” “MANUFACTURED BY” “G. Cramer Dry Plate Co.,” “St. Louis, Mo., U.S.A.” “NEW YORK DEPOT: 93 University Place.” “Keep in a Dry, Dimly Lighted Place.” “Open in Dark Room Only.” At the top of the lid is handwriting in pencil, “Box No. 3 finished”. Along one edge is another blue label, an anchor illustration “ANCHOR Brand.” “CRAMER PLATES.” “Emulsion 18544” “ONE DOZ. 4 x 5”. There is a brown tape along the edge of the lid. The bottom of the box is stamped with “185445 A10” “THIS” “TRADE-MARK” “REGISTERED IN Anchor” “U.S. PAT. OFFICE.” The inside of the box is a golden yellow. Along the edges of the bottom of the box, is a gingham printed tape.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0263
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Dry Plates Box
https://archives.whyte.org/en/permalink/artifact104.41.0271
- Date
- prior to 1977
- Material
- cardboard;
- Catalogue Number
- 104.41.0271
- Description
- An empty Eastman’s Dry Plate box with a label on the lid. Along the edge of the lid is a red border, in a beige square with a smaller black square text reads “Eastman’s” “Dry Plates” “MANUFACTURED BY” “EASTMAN KODAK CO.,” “ROCHESTER, N.Y.” “TO BE OPENED ONLY IN PHOTOGRAPHIC DARK ROOM.” There is pen…
1 image
- Title
- Dry Plates Box
- Date
- prior to 1977
- Material
- cardboard;
- Dimensions
- 2.9 x 13.8 x 11.3 cm
- Description
- An empty Eastman’s Dry Plate box with a label on the lid. Along the edge of the lid is a red border, in a beige square with a smaller black square text reads “Eastman’s” “Dry Plates” “MANUFACTURED BY” “EASTMAN KODAK CO.,” “ROCHESTER, N.Y.” “TO BE OPENED ONLY IN PHOTOGRAPHIC DARK ROOM.” There is pencil handwriting along the top of the label which reads “Lila Aunt Lizzie”. Along one of the edges of the lid a sticker/label that is partially torn making it illegible. Inside the lid is another box with a white sticker label that reads “Emulsion No. 5599” “Packer No. 13” “If these plates are found to be defective, the user will confer a favor by returning them direct to the manufacturer in this box, together with a negative, and his name, address, and a statement of the trouble written hereon” “EASTMAN KODAK CO.,” “Rochester, N.Y., U.S.A.” “KODAK, LIMITED” “43 Clerkenwell Road, London.” “Paris. Berlin. Brussels. Vienna. St. Petersburg. Moscow. Liverpool. Glasgow. Melbourne.” There is some pencil markings as well. The edges are held with tape. The inside of this box is golden yellow.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0271
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.