Skip header and navigation

Narrow Results By

21 records – page 1 of 2.

Date
1987
Material
fibre, cotton corduroy; polyester; paper; plastic; metal
Catalogue Number
103.04.1080
Description
A blue corduroy cap with a sun visor, the crown divided into six pie-shaped pieces sewn down and meeting at the top with a fabric-covered metal button. The inside has a white net polyester lining sewn down with royal blue strips of polyester fabric and a hard piece of plastic on the inside forehea…
  1 image  
Title
Baseball Cap Hat
Date
1987
Material
fibre, cotton corduroy; polyester; paper; plastic; metal
Dimensions
18.0 x 20.0 x 27.0 w/ sun visor cm
Description
A blue corduroy cap with a sun visor, the crown divided into six pie-shaped pieces sewn down and meeting at the top with a fabric-covered metal button. The inside has a white net polyester lining sewn down with royal blue strips of polyester fabric and a hard piece of plastic on the inside forehead to support the patch in front. There is machine-embroidered felt-like blue patch (8.8 x 6.5cm wide) heat-applied on the front. Written on the patch in white lettering “HUSKY”, underneath and to the viewer’s right, in dark yellow lettering “World Downhill 1987”, below that an image of a ski racer in a downhill racing crouch position with a red maple leaf behind; below the skier, viewer’s right, in yellow “PREVIEW 88” and then “NAKISKA” in white. There is a white label, sewn onto the inside band viewer’s left, with black lettering “ A.C.I.C. INT. ENT. LTD. Calgary, Alberta For Husky Oil CA 11259 Corduroy”
Subject
sports
skiing
Eddie Hunter
Credit
Gift of Eddie Hunter, Banff, 1995
Catalogue Number
103.04.1080
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1982
Material
fibre; polyester; paper; plastic; metal
Catalogue Number
103.04.1081 a,b
Description
(a) A blue polyester (with foam and plastic) cap with a sun visor; the crown is divided into four pie-shaped pieces in the back and one large foam piece across the crown forehead and sewn down meeting at the top with a fabric-covered metal button. There is machine-embroidered white satin patch (7.2…
  1 image  
Title
Baseball Cap Hat
Date
1982
Material
fibre; polyester; paper; plastic; metal
Dimensions
27.0 x 21.0 x 18.0 w/visor cm
Description
(a) A blue polyester (with foam and plastic) cap with a sun visor; the crown is divided into four pie-shaped pieces in the back and one large foam piece across the crown forehead and sewn down meeting at the top with a fabric-covered metal button. There is machine-embroidered white satin patch (7.2cm square) sewn down with yellow thread around the border. The Superman logo is on the patch in red and yellow and written underneath in red block letters “CALGARY ‘82”. There is a white label, viewer’s left, with blue lettering “CA02839 100% Polyester Laminated poly foam Lamine de mousse de polyurethane SIZE A-JUST M/L 7” - 71/2” Made in Korea Fabrique en Cores”(b) A small plastic Canadian flag pin, red on the ends, and a red maple leaf (1.2x 0.60cm high) on a white background middle, pinned on with a tie-tack style (spike and clutch closure attachment) pin closure onto the cap’s patch.
Subject
sports
skiing
Eddie Hunter
Credit
Gift of Eddie Hunter, Banff, 1995
Catalogue Number
103.04.1081 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1984
Material
fibre; polyester; paper; plastic;
Catalogue Number
103.04.1082
Description
A blue cotton and polyester cap with a visor. The crown is divided into four pie-shaped pieces in the back and one large cotton piece across the crown forehead and sewn down meeting at the top with a hard plastic button. There is stamped area (6.5x9.0cm wide) with a woman, viewer’s left, in a beret…
  1 image  
Title
Baseball Cap Hat
Date
1984
Material
fibre; polyester; paper; plastic;
Dimensions
19.0 x 26.0 cm
Description
A blue cotton and polyester cap with a visor. The crown is divided into four pie-shaped pieces in the back and one large cotton piece across the crown forehead and sewn down meeting at the top with a hard plastic button. There is stamped area (6.5x9.0cm wide) with a woman, viewer’s left, in a beret surrounded by a circle, and a simulated skier, viewer’s right, all outlined in beige paint, with “1984” printed underneath. There is a white label, viewer’s left, sewn on the front and resting on the visor, with black lettering ”cap-a-roo”. On the inside label ”TRI-GARREX LIMITED Ottawa, Canada COTTON 50% COTTON POLYESTER 50% POLYESTER LAMINATED TO POLYEUROTHANE MADE IN/FABRIQUE AU HAITI
Subject
sports
skiing
Eddie Hunter
Credit
Gift of Eddie Hunter, Banff, 1995
Catalogue Number
103.04.1082
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1982
Material
fabric; plastic
Catalogue Number
103.04.0122
Description
A red snap-brim baseball cap, front panel solid fabric with triangular patch that reads “EVEREST 82” underneath a Canadian flag. Back of hat is open red mesh, adjustable with snap closure. Written in black marker on the underside of the brim “L GALLAGHER.” Written in green marker on the foam inside…
  1 image  
Title
Baseball Cap Hat
Date
1982
Material
fabric; plastic
Dimensions
11.0 x 21.4 x 27.7 cm
Description
A red snap-brim baseball cap, front panel solid fabric with triangular patch that reads “EVEREST 82” underneath a Canadian flag. Back of hat is open red mesh, adjustable with snap closure. Written in black marker on the underside of the brim “L GALLAGHER.” Written in green marker on the foam inside front panel “Robbie G.”
Subject
Lloyd Gallagher
Everest 82
memorabilia
commemorative
Credit
Gift of Peter Spear, 2017
Catalogue Number
103.04.0122
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1982
Material
fabric; cotton; leather; metal
Catalogue Number
103.04.0123
Description
A blue baseball cap with “ORTOVOX AVALANCHE SAFETY EQUIPMENT” written in red and yellow stitching on the front. “ORTOVOX” is stitched in red and “AVALANCHE SAFETY EQUIPMENT” below it in yellow. Back of hat has small opening where it can be adjusted using a leather strap and metal clasp. The metal c…
  1 image  
Title
Baseball Cap Hat
Date
1982
Material
fabric; cotton; leather; metal
Dimensions
5.0 x 22.2 x 26.3 cm
Description
A blue baseball cap with “ORTOVOX AVALANCHE SAFETY EQUIPMENT” written in red and yellow stitching on the front. “ORTOVOX” is stitched in red and “AVALANCHE SAFETY EQUIPMENT” below it in yellow. Back of hat has small opening where it can be adjusted using a leather strap and metal clasp. The metal clasp is attached to the hat with a snap.
Subject
Lloyd Gallagher
Everest 82
memorabilia
commemorative
accessories
Credit
Gift of Peter Spear, 2017
Catalogue Number
103.04.0123
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1985
Material
fibre; metal
Catalogue Number
105.01.1006 a,b
Description
Two 1885/1985 Banff National Park Centennial banners. a) National Park Centennial is written in brown lettering in both French and English (5.0 & 8.0 letters) A large 1985 (14.0 letters) in white with brown trim is set between the English and French in the upper half of the banner, the Park logo (b…
  1 image  
Title
Commemorative Banner
Date
1985
Material
fibre; metal
Dimensions
75.0 x 288.0 cm
Description
Two 1885/1985 Banff National Park Centennial banners. a) National Park Centennial is written in brown lettering in both French and English (5.0 & 8.0 letters) A large 1985 (14.0 letters) in white with brown trim is set between the English and French in the upper half of the banner, the Park logo (beaver) and the dates 1885 and 1985 appear in brown in the lower portion. An orange dotted trail zig-zags from bottom to top. All is set on a white nylon background. There are 3 grommets on either side. The bottom of the banner is cut in tails. This banner is used and rather soiled. b) same as banner (a) but new and still in package.
Subject
events
Banff Park Centennial
Credit
Gift of Jim Vollmershausen, 1986
Catalogue Number
105.01.1006 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1982
Material
plastic; vinyl
Catalogue Number
105.01.0020 a,b
Description
Two white pennants with triangular vinyl patches reading “EVEREST 82” sewn on both sides. White cord sewn into the tops of the pennants and extends out from either side.
  1 image  
Title
Commemorative Banner
Date
1982
Material
plastic; vinyl
Dimensions
40.2 x 39.2 cm
Description
Two white pennants with triangular vinyl patches reading “EVEREST 82” sewn on both sides. White cord sewn into the tops of the pennants and extends out from either side.
Subject
Lloyd Gallagher
Everest 82
commemorative
memorabilia
Credit
Gift of Peter Spear, 2017
Catalogue Number
105.01.0020 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1985
Material
fibre; wood
Catalogue Number
105.01.1010
Description
Centennial banner, Parks 1885-1985. Silk screen printed banner in brown - wooden rods top and bottom for hanging and weight.
  1 image  
Title
Commemorative Banner
Date
1985
Material
fibre; wood
Dimensions
167.0 x 90.0 cm
Description
Centennial banner, Parks 1885-1985. Silk screen printed banner in brown - wooden rods top and bottom for hanging and weight.
Subject
Parks Canada
Parks centennial
Credit
Gift of anonymous, 1989
Catalogue Number
105.01.1010
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1985
Material
fibre; wood
Catalogue Number
105.01.1011
Description
Beige coloured cotton with brown screened lettering: 100 years of heritage conservation" A stylized beaver inside a frame with "1885 - 1985" and that inside a frame. Below that: " 100 ans de conservation du patrimoine" Wooden rods top and bottom threaded through casing, top also has a thick bro…
  1 image  
Title
Commemorative Banner
Date
1985
Material
fibre; wood
Dimensions
167.0 x 90.0 cm
Description
Beige coloured cotton with brown screened lettering: 100 years of heritage conservation" A stylized beaver inside a frame with "1885 - 1985" and that inside a frame. Below that: " 100 ans de conservation du patrimoine" Wooden rods top and bottom threaded through casing, top also has a thick brown string attached for hanging.
Subject
Parks Canada
Parks centennial
Credit
Gift of Joe Benge, Field, 1991
Catalogue Number
105.01.1011
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1917 – 1926
Material
metal; plastic; leather
Catalogue Number
104.41.0282
Description
Black hard-shelled leather, No.2 Folding Autographic Brownie Kodak camera. The front panel is released by slide a metal switch open, which also acts as the stand for the camera. When opened it reveals the lens, black leather bellows, and focal range on the right side. The lens locks into one of two…
  1 image  
Title
Folding Camera
Date
1917 – 1926
Material
metal; plastic; leather
Dimensions
16.5 x 8.7 cm
Description
Black hard-shelled leather, No.2 Folding Autographic Brownie Kodak camera. The front panel is released by slide a metal switch open, which also acts as the stand for the camera. When opened it reveals the lens, black leather bellows, and focal range on the right side. The lens locks into one of two spots on the focal range meter, with a small lever on the side of the lens. On top of the lens is the viewfinder which can be pushed to the side, for portrait or landscape. The lens is marked with a lot of text, shutter speed on top and aperture underneath (which includes the type of scenario for each aperture), such as “PORTRAIT 4” “NEAR VIEW” “AVERAGE VIEW 8” “DISTANT VIEW 16” “MARINE 32” “CLOUDS 64”. Along the edge of the lens text reads “KODAK BALL BEARING SHUTTER”. Underneath the lens reads, “NO. 2 FOLDING” “AUTOGRAPHIC” “BROWNIE”. To load the film, when the front panel is closed there is longer metal bar that can slid to the right that releases the main part of the camera, which can be taken out fully. Inside the camera is a few pieces of tape. Along the edges of the camera are different dates for patents. On the right side of the camera is a leather handle, which reads “No. 2 FOLDING AUTOGRAPHIC BROWNIE”, and a silver ‘key’ to reel the film. The back of the camera features a metal bar on a hinge that reads “USE AUTOGRAPHIC FILM” “NO. A-120” and a art-deco decorated stylus above, this reveals a part of the film to be autographed. There is also an orange circle to view the film inside.
Subject
film photography
photography
camera
Kodak
Whyte
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.41.0282
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1914 – 1934
Material
metal, leather, glass
Catalogue Number
104.41.1048
Description
Large folding camera with case; No. 3-A autographic model C; lens and bellows assembly rides on fold outbed; distance indicator right side of bed; tripod mounts on bed and side of body; film advance left side body; body covered with black leather; optical viewfinder right top corner of floating len…
  1 image  
Title
Folding Camera
Date
1914 – 1934
Material
metal, leather, glass
Dimensions
26.9 x 13.0 x 5.7 cm
Description
Large folding camera with case; No. 3-A autographic model C; lens and bellows assembly rides on fold outbed; distance indicator right side of bed; tripod mounts on bed and side of body; film advance left side body; body covered with black leather; optical viewfinder right top corner of floating lens plate; shutter selection aperture and shutter release on lens; black leather case with broken strap;manufacturer's insignia on buckle; on the back of camera is flap and scribe for writing on film.
Subject
photography
Credit
Gift of Robert N. Smith, Canmore, 1985
Catalogue Number
104.41.1048
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1914 – 1930
Material
metal, leather, glass
Catalogue Number
104.41.1043
Description
Folding Kodak camera; lens-bellows assembly rides out of body on bed; distance indicator near tip of bed; lens plate floats on 2 square steel columns; shutter selection dialabove lens; aperture selection dial below; viewfinder off to upper corner oflens plate; shutter release beside lens; back is …
  1 image  
Title
Folding Camera
Date
1914 – 1930
Material
metal, leather, glass
Dimensions
24.4 x 5.4 x 11.9 cm
Description
Folding Kodak camera; lens-bellows assembly rides out of body on bed; distance indicator near tip of bed; lens plate floats on 2 square steel columns; shutter selection dialabove lens; aperture selection dial below; viewfinder off to upper corner oflens plate; shutter release beside lens; back is detachable release is twoclips top/bottom of body along with film advance.
Subject
photography
Credit
Gift of Richard Colley, Calgary, 1986
Catalogue Number
104.41.1043
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1914 – 1930
Material
metal, leather, glass
Catalogue Number
104.41.1042
Description
Vest pocket Autographic with case; front plate pulls out of body; aperture selection lever internal lens,shutter speed selector; viewfinder lens; shutter release and viewfinder window behind front plate; leather bellows and support; open/lock button, film advance on one narrow side of body; back ha…
  1 image  
Title
Folding Camera
Date
1914 – 1930
Material
metal, leather, glass
Dimensions
12.8 x 4.6 x 7.6 cm
Description
Vest pocket Autographic with case; front plate pulls out of body; aperture selection lever internal lens,shutter speed selector; viewfinder lens; shutter release and viewfinder window behind front plate; leather bellows and support; open/lock button, film advance on one narrow side of body; back has amber window and window for writing on film - Autographic; leather case with snap to hold closed.
Subject
photography
Credit
Gift of Richard Colley, Calgary, 1986
Catalogue Number
104.41.1042
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1914 – 1940
Material
metal; fibre; skin; glass
Catalogue Number
104.41.1038
Description
Kodak No. 1-A Autographic Junior; Lens and bellows assembly rides on fold-out bed; box viewfinder centeredabove lens; aperture setting on front lens assembly; distance setting onfold-out bed; manufacturer's label on front assembly; metal film advance knobnear top; hidden button for opening camera;…
  1 image  
Title
Folding Camera
Date
1914 – 1940
Material
metal; fibre; skin; glass
Description
Kodak No. 1-A Autographic Junior; Lens and bellows assembly rides on fold-out bed; box viewfinder centeredabove lens; aperture setting on front lens assembly; distance setting onfold-out bed; manufacturer's label on front assembly; metal film advance knobnear top; hidden button for opening camera; detachable back; covered slotopens to allow writing directly on the film; original leather case with addedleather carrying strap; accessories not part of original camera: "Neoca"viewfinder in leather storage case, shutter release cable, 3 unexposed films.
Subject
photography
Credit
Gift of Perry Davis, Canmore, 1980
Catalogue Number
104.41.1038
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
ca. 1922 – 1932
Material
metal; leather; glass
Catalogue Number
104.41.0237
Description
Black hard-sided leather No.1 Kodak Series III folding camera. The front panel is released by pressing a small round metal button on the narrow bottom edge [the bottom of the camera is noted by the presence of a threaded hole where a tripod could be mounted] and has a small rectangular metal foot w…
  1 image  
Title
Folding Camera
Date
ca. 1922 – 1932
Material
metal; leather; glass
Dimensions
17.1 x 7.8 x 3.5 cm
Description
Black hard-sided leather No.1 Kodak Series III folding camera. The front panel is released by pressing a small round metal button on the narrow bottom edge [the bottom of the camera is noted by the presence of a threaded hole where a tripod could be mounted] and has a small rectangular metal foot with “Kodak” engraved in decorative writing that keeps the camera propped up. The lens mechanism slides out on tracks with soft black leather bellows behind it and a viewfinder that can be used in portrait and landscape by gently push to the side. There is a art-deco decorated stylus housed next to the lens. There is lots of text along the lens to make adjustments, it is a “DIOMATIC No 0” lens. There are small plaques along the camera base which read “NO. 1 - KODAK SERIES III” “MADE IN CANADA BY CANADIAN KODAK CO., LIMITED TORONTO, ONT 28981”. The back panel of the camera pops off by pressing two metal clasps on both short sides and can house a roll of film. On the back embossed is text that reads “USE “KODAK” FILM NO A120” When the camera is open, on the top is a leather strap with a faded “Kodak” embossed on it.
Subject
film photography
folding camera
Kodak
photography
Credit
Gift of L. A. E Duncan, Calgary, 1980
Catalogue Number
104.41.0237
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1980 – 1991
Material
metal; plastic
Catalogue Number
105.02.1136
Description
Black plastic cylinder with a screw top made from plummer’s pipe. The canister has a metal cable securely attached at the bottom and near the lid. The canister is marked “AL KANE.” The plastic pieces still have yellow price stickers attached.
  1 image  
Title
Summit Canister
Date
1980 – 1991
Material
metal; plastic
Description
Black plastic cylinder with a screw top made from plummer’s pipe. The canister has a metal cable securely attached at the bottom and near the lid. The canister is marked “AL KANE.” The plastic pieces still have yellow price stickers attached.
Subject
sports
climbing
mountaineering
Alpine Club of Canada
Alan Kane
Credit
Gift of Graeme Pole, Field, 1991
Catalogue Number
105.02.1136
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1984 – 1986
Material
metal
Catalogue Number
105.02.1100
Description
Open-ended aluminum tube, Mount Sir Donald, 2 mm thick aluminum, roughly cut ends. Lightning damage ca 1.5 x 2, 5.0 from end.
  1 image  
Title
Summit Canister
Date
1984 – 1986
Material
metal
Dimensions
18.7 cm
Description
Open-ended aluminum tube, Mount Sir Donald, 2 mm thick aluminum, roughly cut ends. Lightning damage ca 1.5 x 2, 5.0 from end.
Subject
sports
climbing
Mount Sir Donald
Credit
Gift of Sharon Wood, Canmore, 1986
Catalogue Number
105.02.1100
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1980 – 1989
Material
plastic
Catalogue Number
105.02.1042 a-c
Description
Two summit registers. (a,b) Typical 35 mm film container with lid, contained notes from Skoki Mountain. (c) Plastic bag 26.0x15.5, open one end. Orange "Totem: logo 4.5x10.4, contained notes from Mount Hector.
  1 image  
Title
Summit Canister
Date
1980 – 1989
Material
plastic
Description
Two summit registers. (a,b) Typical 35 mm film container with lid, contained notes from Skoki Mountain. (c) Plastic bag 26.0x15.5, open one end. Orange "Totem: logo 4.5x10.4, contained notes from Mount Hector.
Subject
sports
climbing
Skoki Mountain
Mount Hector
Credit
Gift of Michael Potter, Turner Valley, 1989
Catalogue Number
105.02.1042 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1910 – 1980
Material
metal
Catalogue Number
105.02.1106
Description
Grey film container, two pieces firmly together, badly damaged both ends.
  1 image  
Title
Summit Canister
Date
1910 – 1980
Material
metal
Dimensions
6.0 cm
Description
Grey film container, two pieces firmly together, badly damaged both ends.
Subject
sports
climbing
Mount Arthur Meighen
Credit
Gift of Ron Matthews, Canmore, 1982
Catalogue Number
105.02.1106
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1984 – 1988
Material
metal
Catalogue Number
105.02.1117
Description
Baking powder can used as summit canister. Canister has push-on lid. Lid has "Magic Baking Powder" stamped on it. One small hole in body of can and three smaller ones in lid.
  1 image  
Title
Summit Canister
Date
1984 – 1988
Material
metal
Dimensions
9.6 x 5.5 cm
Description
Baking powder can used as summit canister. Canister has push-on lid. Lid has "Magic Baking Powder" stamped on it. One small hole in body of can and three smaller ones in lid.
Subject
sports
climbing
Mount Bridgland
Credit
Gift of Alpine Club of Canada, Canmore, 1989
Catalogue Number
105.02.1117
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

21 records – page 1 of 2.

Back to Top