Narrow Results By
- Date
- 1945 – 1960
- Material
- metal; glass; wood; fabric;
- Catalogue Number
- 104.41.0149
- Description
- A large “BETAX NO5” lens mounted on a square piece of wood with a purple-lined lens cap in a black metal box lined with red velvet - also included in the box is a remote camera trigger. On the lid of the box is a metal tag that has “Kodak EKTAR LENS” engraved in it.
1 image
- Title
- Camera Lens
- Date
- 1945 – 1960
- Material
- metal; glass; wood; fabric;
- Dimensions
- 10.5 x 17.0 x 17.0 cm
- Description
- A large “BETAX NO5” lens mounted on a square piece of wood with a purple-lined lens cap in a black metal box lined with red velvet - also included in the box is a remote camera trigger. On the lid of the box is a metal tag that has “Kodak EKTAR LENS” engraved in it.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0149
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1931 – 1942
- Material
- metal; glass;
- Catalogue Number
- 104.41.0214
- Description
- Ernst Leitz Wetzlar Hektor f=7,3 cm 1:1,9 lens with hood and lens cap in a metal tube case. The lens cap has Leica engraved on it - the case has the manufacturer name and the lens size stamped on the lid, which slides up off the tube.
1 image
- Title
- Camera Lens
- Date
- 1931 – 1942
- Material
- metal; glass;
- Dimensions
- 8.6 cm
- Description
- Ernst Leitz Wetzlar Hektor f=7,3 cm 1:1,9 lens with hood and lens cap in a metal tube case. The lens cap has Leica engraved on it - the case has the manufacturer name and the lens size stamped on the lid, which slides up off the tube.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.41.0214
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Camera Lens Case
https://archives.whyte.org/en/permalink/artifact104.41.0092%20a-f
- Date
- 1940 – 1980
- Material
- leather; wood; metal; glass; plastic; fabric
- Catalogue Number
- 104.41.0092 a-f
- Description
- Black hard-sided leather case with a hinged lid and a single central locking latch, unlocked with no key. A leather carry strap is attached to the short sides of the case with metal hooks - the strap is wrapped around the leather handle on the lid of the case, also attached with metal loops. Attach…
1 image
- Title
- Camera Lens Case
- Date
- 1940 – 1980
- Material
- leather; wood; metal; glass; plastic; fabric
- Dimensions
- 17.8 x 8.3 x 34.5 cm
- Description
- Black hard-sided leather case with a hinged lid and a single central locking latch, unlocked with no key. A leather carry strap is attached to the short sides of the case with metal hooks - the strap is wrapped around the leather handle on the lid of the case, also attached with metal loops. Attached with string to the metal loops of the handle are a leather travel name tag (on a piece of orange paper is printed “NICHOLAS MORANT BOX 1288 BANFF, ALBERTA CANADA”) and the remnants of a Canadian Pacific paper tag. The exterior of the case has a collection of travel stickers and labels, mostly worn and torn - some still legible are from Whitehouse (Yukon), Waterloo (Ontario), Anchorage (Alaska), and St. John’s (Newfoundland).The interior of the box is lined with dark purple velvet and the main body compartment is divided into two compartments, one larger than the other.Inside in the case are two black Dallmeyer (London) lenses, both have tubes and caps that fit over the ends. The larger one is inside a small black box lined with purple velvet and the smaller one is in a leopard-print drawstring bag. Also in the case are two larger filters, one yellow and one red, in their own individual red velvet bags, a small yellow filter inside a black and yellow plastic “KODAK” box, and a metal base covered in green felt on one side and black felt on the other.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0092 a-f
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Catalogue Number
- 104.41.0081 a-d
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded suppor…
1 image
- Title
- Camera Tripod
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Dimensions
- 28.3 x 28.6 x 138.5 cm
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded supports and buckled leather straps located inside to keep the tripod in place - straps not done up at time of processing. NICHOLAS MORANT written in white along the narrow top edge on either side of carrying handle, TR1 written in yellow paint in the top left end of narrow edge and in top right corner of opening side, the torn remains on a Canadian Pacific Railway label remains on the side that does not open. Tripod: Manufacturer mark on metal support below the camera support base reads [D]INEMA EQUIPMENT CO. No manufacturer details available online. Tripod dimensions are 124.1x14.7x14.7 cm. The legs of the tripod are wood, with metal spikes at the bottoms, metal brackets, and a metal camera support rig [possibly cast iron]. The legs are held together with a buckled strip of leather at the bottom. Also in the case is a metal pole with a black plastic handle that can screw into the camera support base for use as a controller and a plastic zip-lock baggie containing a length of chain with 4 metal clasps throughout 286.0 cm in length.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0081 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1949
- Material
- wood; metal; plastic
- Catalogue Number
- 104.41.0100
- Description
- Wood and metal Thalhammer camera tripod with metal spikes at the end of the legs, brackets at various points along the legs, and camera mount. The tripod is retracted to its shortest setting, but can double in height. Each leg has an adjustable metal bracket with circular knobs on the outside of th…
1 image
- Title
- Camera Tripod
- Date
- 1930 – 1949
- Material
- wood; metal; plastic
- Dimensions
- 88.8 cm
- Description
- Wood and metal Thalhammer camera tripod with metal spikes at the end of the legs, brackets at various points along the legs, and camera mount. The tripod is retracted to its shortest setting, but can double in height. Each leg has an adjustable metal bracket with circular knobs on the outside of the leg - the flat part of the knob features a kneeling man holding the handle of a long hammer in front of him, with his hands above his head just below the head of the hammer. This same logo is featured throughout other metal pieces around the head of the tripod. A plastic-handled grip is attached to the top of the tripod. Four circular pieces of paper screwed onto the camera support base, possibly as spacers, upon removal the Thalhammer company information is shown.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0100
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1942
- Material
- metal; paint; plastic
- Catalogue Number
- 104.41.1166
- Description
- A silver-coloured metal tripod with adjustable, telescoping legs that are screwed onto a metal base covered with black plastic; this, in turn, is connected to a flat metal base that has a place to screw the camera on and also a metal arm with a faux tortoise-shell plastic handle. The bottoms of the…
1 image
- Title
- Camera Tripod
- Date
- 1942
- Material
- metal; paint; plastic
- Dimensions
- 67.0 x 7.3 cm
- Description
- A silver-coloured metal tripod with adjustable, telescoping legs that are screwed onto a metal base covered with black plastic; this, in turn, is connected to a flat metal base that has a place to screw the camera on and also a metal arm with a faux tortoise-shell plastic handle. The bottoms of the legs have hard black, plastic tips and the top of the base, which is covered in black hard plastic, has the manufacturer’s name in white script, but is indiscernible.
- Subject
- hobbies
- photography
- business
- Byron Harmon
- Credit
- Gift of Lorne James, North Vancouver, 2006
- Catalogue Number
- 104.41.1166
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Decorative Plate
https://archives.whyte.org/en/permalink/artifact102.04.0341%20a-l
- Date
- 1940 – 1945
- Material
- ceramic
- Catalogue Number
- 102.04.0341 a-l
- Description
- Ivory coloured plates (a to l) with scalloped rim edges, all having blue and white, Rocky Mountain and Quebec ski scenes. (a) "Mount Assiniboine” - 2 cabins, 3 skiers (b) "Mount Assiniboine” - one cabin (c) "Mount Assiniboine Lodge” - 2 cabins, 1 skier (e) "Sunshine Valley, Near Banff" - three ski…
1 image
- Title
- Decorative Plate
- Date
- 1940 – 1945
- Material
- ceramic
- Dimensions
- 1.6 x 23.8 cm
- Description
- Ivory coloured plates (a to l) with scalloped rim edges, all having blue and white, Rocky Mountain and Quebec ski scenes. (a) "Mount Assiniboine” - 2 cabins, 3 skiers (b) "Mount Assiniboine” - one cabin (c) "Mount Assiniboine Lodge” - 2 cabins, 1 skier (e) "Sunshine Valley, Near Banff" - three skiers (f) "Sunshine Valley, Near Banff" - turning skier (g) "Mount, Norquay, Banff" - ski jumper and spectators (h) "Mount Norquay, Banff” - two ski tourers (i) "Skoki Valley, Lake Louise" - two skiers, one pointing with pole (j) "Val Morin" - skier in parka (k) "Val Morin, Laurentians" - two skiers touring through trees (l) "Chateau Frontenac, Quebec" - skier looking at Chateau. (a-i) are Rocky Mountains scenes. (j,k,l) are Laurentians scenes. "Wedgewood of Etruria & Barlaston, Made in England" and various identification number stamps on back of all plates.
- Subject
- households
- decorative
- photography
- Canadian Rockies
- Nicholas Morant
- sports
- skiing
- Laurentians
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.04.0341 a-l
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Decorative Plate
https://archives.whyte.org/en/permalink/artifact102.04.1050%20a-k
- Date
- 1940 – 1945
- Material
- ceramic
- Catalogue Number
- 102.04.1050 a-k
- Description
- 11 of a set of 12 decorative plates, all with scalloped edges and with Canadian scenes. (a) The Towers, Assiniboine Lodge (b) Sunshine Valley, Near Banff, 3 skiers (c) Sunshine Valley, Near Banff, single skier (d) Mount Assiniboine, cabins with 3 skiers (e) Mount Assiniboine (f) Mount Assiniboin…
1 image
- Title
- Decorative Plate
- Date
- 1940 – 1945
- Material
- ceramic
- Description
- 11 of a set of 12 decorative plates, all with scalloped edges and with Canadian scenes. (a) The Towers, Assiniboine Lodge (b) Sunshine Valley, Near Banff, 3 skiers (c) Sunshine Valley, Near Banff, single skier (d) Mount Assiniboine, cabins with 3 skiers (e) Mount Assiniboine (f) Mount Assiniboine, single skier (g) Chateau Frontenac, Quebec (h) Val Morin, Laurentians (i) Val Morin (j) Skoki Valley, Lake Louise (k) Mount Norquay, Banff
- Credit
- Gift of William O. Field, Great Barrington, USA, 1995
- Catalogue Number
- 102.04.1050 a-k
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Developing Tank
https://archives.whyte.org/en/permalink/artifact104.41.1059
- Date
- 1930 – 1950
- Material
- plastic
- Catalogue Number
- 104.41.1059
- Description
- Black plastic developing tank; black plastic cylinder with detachable lid; 6 groups of 4 ridges running the height of cylinder; lip surrounding opening at top; "PLANO" printed in relief on lid; 2 oblong holes to correspond to tongues on bottom section; olive colour spool with near spaced thread att…
1 image
- Title
- Developing Tank
- Date
- 1930 – 1950
- Material
- plastic
- Dimensions
- 12.0 x 12.4 cm
- Description
- Black plastic developing tank; black plastic cylinder with detachable lid; 6 groups of 4 ridges running the height of cylinder; lip surrounding opening at top; "PLANO" printed in relief on lid; 2 oblong holes to correspond to tongues on bottom section; olive colour spool with near spaced thread attached to lid with finger knob coming through to outside.
- Subject
- photography
- Credit
- Gift of Robert N. Smith, Canmore, 1985
- Catalogue Number
- 104.41.1059
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Dry Mounting Press
https://archives.whyte.org/en/permalink/artifact104.41.1067
- Date
- prior to 1950
- Material
- metal
- Catalogue Number
- 104.41.1067
- Description
- Metal press with handle, electrical cord (220). Three brass hinged mounting plates, 3 sizes.
1 image
- Title
- Dry Mounting Press
- Date
- prior to 1950
- Material
- metal
- Description
- Metal press with handle, electrical cord (220). Three brass hinged mounting plates, 3 sizes.
- Subject
- photography
- Byron Harmon
- Credit
- Gift of Don Harmon, Banff, 1994
- Catalogue Number
- 104.41.1067
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Engraving Plate
https://archives.whyte.org/en/permalink/artifact104.43.1005
- Date
- 1930 – 1970
- Material
- wood; metal, copper
- Catalogue Number
- 104.43.1005
- Description
- A rectangle of wood with a metal plate attached. The copper plate has an image on it.This item was transferred to the Archives by SS in May/June 2014.
1 image
- Title
- Engraving Plate
- Date
- 1930 – 1970
- Material
- wood; metal, copper
- Description
- A rectangle of wood with a metal plate attached. The copper plate has an image on it.This item was transferred to the Archives by SS in May/June 2014.
- Subject
- photography
- Credit
- Gift of Arthur Oliver Wheeler, 1975
- Catalogue Number
- 104.43.1005
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1950
- Material
- wood; metal; plastic; glass;
- Catalogue Number
- 104.41.0163
- Description
- Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger su…
1 image
- Title
- Enlarger
- Date
- 1930 – 1950
- Material
- wood; metal; plastic; glass;
- Dimensions
- 105.0 x 44.5 x 55.7 cm
- Description
- Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger support to move up and down the support arm. The enlarger itself consists of a shiny metal dome with a fabric-wrapped power cord coming out the top [most likely the house for the light source] mounted on top of the grey metal frame [to which the enlarger support is attached] and into which several different negative trays can be fit, below the frame are dark grey fabric bellows that can be adjusted along a set of metal poles, the bottom of the bellows are attached to a smaller grey metal frame that also houses the focussing lens and a coloured filter that can be rotated in and out of frame.
- Subject
- Nicholas Morant
- photography
- photograph equipment
- camera equipment
- darkroom
- photograph developing;
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0163
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Enlarger Stand
https://archives.whyte.org/en/permalink/artifact104.41.0010
- Date
- 1940 – 1966
- Material
- metal; wood
- Catalogue Number
- 104.41.0010
- Description
- Camera or enlarger stand on wooden base. Polished steel shaft having cast metal support for either enlarger orcamera, one tightening knob. Metal strap connected to support wound onto spring loaded spool housed at top. Female electric connector at top, male electric connector on bottom. Stabilizing…
1 image
- Title
- Enlarger Stand
- Date
- 1940 – 1966
- Material
- metal; wood
- Dimensions
- 125.0 x 51.0 cm
- Description
- Camera or enlarger stand on wooden base. Polished steel shaft having cast metal support for either enlarger orcamera, one tightening knob. Metal strap connected to support wound onto spring loaded spool housed at top. Female electric connector at top, male electric connector on bottom. Stabilizing bar connecting top to bottom. Except for shaft, all parts black matte finish, laminated wooden base.
- Subject
- photography
- hobbies
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.41.0010
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1960
- Material
- paper; cardboard; wood;
- Catalogue Number
- 104.51.1003
- Description
- Square manilla envelope with one wooden square and one cardboard square with unknown purposes inside. The envelope has “Peter Whyte” written in cursive above “1.60” written in pencil - “9203” is stamped in black in the middle. The wooden square has a hole drilled in the middle and angled edges, mak…
1 image
- Title
- Envelope
- Date
- 1930 – 1960
- Material
- paper; cardboard; wood;
- Dimensions
- 0.5 x 11.9 x 11.9 cm
- Description
- Square manilla envelope with one wooden square and one cardboard square with unknown purposes inside. The envelope has “Peter Whyte” written in cursive above “1.60” written in pencil - “9203” is stamped in black in the middle. The wooden square has a hole drilled in the middle and angled edges, making one side a slightly smaller square than the other, and there are two small pieces of white adhesive tape, one of which has random letters and numbers typed on it [possibly a spacer for a tripod]. The cardboard square has a small hole poked in the middle and blocked off on one side with what appears to be tinfoil taped down with several layers of red adhesive tape.
- Subject
- photography
- Peter Whyte;
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.51.1003
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1940 – 1960
- Material
- metal; wood; plastic; glass; fabric; paper;
- Catalogue Number
- 104.41.0152 a-j
- Description
- Black hard-sided travel case with metal corner brackets, a hinged lid with three metal clasps [only the central one locks], a leather carry handle attached to the lid with metal loops, and leather and metal braces on both short sides where a longer strap could be attached. The exterior of the case …
1 image
- Title
- Equipment Case
- Date
- 1940 – 1960
- Material
- metal; wood; plastic; glass; fabric; paper;
- Dimensions
- 31.0 x 19.8 x 43.5 cm
- Description
- Black hard-sided travel case with metal corner brackets, a hinged lid with three metal clasps [only the central one locks], a leather carry handle attached to the lid with metal loops, and leather and metal braces on both short sides where a longer strap could be attached. The exterior of the case has remnants of shipping labels and stickers throughout - prominently on the lid is a large white and red label that reads “GLASS.” Travel tags are attached to both brackets on the sides - one is a paper Canadian Pacific shipping tag and the other is a leather tag with windows showing Nicholas Morant’s information. The interior of the case is divided into several compartments and is lined throughout with blue velvet.Contents include:B : five circular lens filters of different coloured glass - two are housed in a black and yellow plastic case, one is housed in a black and yellow cardboard box, and one is housed inside a red velvet bag stuck inside a metal and wood frame.C : a Speed Graphic Graflex camera - camera had a black fabric strap wrapped around the camera in order to lift it out of the case.D : collection of wires and cords - includes two coiled power cords, a short connection cord [possibly used to attach different camera accessories], and a remote trigger.E : two light reflectors - one is handheld with a simple metal wire handle at the base of the disk housed in a beige fabric bag and the other is a camera-mounted flash in a black fabric bag with “ORD REFLECTOR” embroidered in red.F : a black fabric sheet with red trim.G : three silver metal flash handles, two housed in individual blue fabric bags.H : five flashbulbs of various sizes and shapes - one is blue.I : two equipment lists on paper.J : three 4x6 film magazines and four extra slide boxes.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0152 a-j
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Exposure Meter
https://archives.whyte.org/en/permalink/artifact104.41.0195
- Date
- 1940 – 1941
- Material
- plastic; metal; cardboard;
- Catalogue Number
- 104.41.0195
- Description
- Black plastic hand-held exposure meter with a metal and plastic dial with a raised knob on the front below a depressed window where the exposure meter is. On the bottom of the meter just below the main dial is the exposed lip of the metal dial so that it can be rotated and a small round red plastic…
1 image
- Title
- Exposure Meter
- Date
- 1940 – 1941
- Material
- plastic; metal; cardboard;
- Dimensions
- 5.2 x 7.2 x 9.2 cm
- Description
- Black plastic hand-held exposure meter with a metal and plastic dial with a raised knob on the front below a depressed window where the exposure meter is. On the bottom of the meter just below the main dial is the exposed lip of the metal dial so that it can be rotated and a small round red plastic button. On the back of the meter is a metal screw in the middle [possibly to allow access to the interior], manufacturer details, and a thin strip of fabric adhesive with F.L. Crosby’s address details typed on it in black. The cardboard box has a patterned brown and white lid that fits completely over a beige body and is lined with packing cardboard.
- Credit
- Gift of Robert Crosby Family, Banff, 1998
- Catalogue Number
- 104.41.0195
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1933 – 1949
- Material
- plastic; paint; leather; metal; fabric
- Catalogue Number
- 104.41.1123 a-b
- Description
- (a)Gossen Lunasix exposure and colour meter in a pear shape with leather case. The light meter device measures the amount of light that is appropriate to achieve the proper exposure, indicating for the users which shutter speed and f-number should be selected. Along the top of the exposure meter in…
1 image
- Title
- Exposure Meter
- Date
- 1933 – 1949
- Material
- plastic; paint; leather; metal; fabric
- Dimensions
- (a)2.5; (b)04.5 x (a)6.5; (b)7.5 x (a)11.5; (b)12.0 cm
- Description
- (a)Gossen Lunasix exposure and colour meter in a pear shape with leather case. The light meter device measures the amount of light that is appropriate to achieve the proper exposure, indicating for the users which shutter speed and f-number should be selected. Along the top of the exposure meter in the viewer left corner is a white bulb-like part next to an open circular window that measures the amount of light present in the scene. When the converter slide, located along the viewer right side, is moved to the right and clicked into position the round window is open and ready to read the scene. At the top, on the face of the meter, the light measurement (scale) is present. This shows how much light is present in the scene and directly relates to the remaining scales on the meter. Below the light scale is a plexiglass film-speed setting disc with grooves that allow the operator to easily move the dial. In the middle of the dial there is the Lunasix manufacturer symbol. On viewer left side of this emblem is the DIN exposure index of the film in use; on the proper right side of this emblem is the ASA exposure index of the film in use. By moving the dial one adjusts the film-speed setting, which is indicated in the DIN and ASA boxes, whereby the index number is lined up against the triangular white marker in the respective window. A manual would have originally been sold with the object giving a more comprehensive overview of the film-speed table with a technical appendix. On the rear of the object in the viewer right corner one will see the correct position of the 2 batteries indicated through a tiny diagram. Below this is a metal battery chamber. Below this are the words “2 Batt. Mallory” “PX 625 o. PX 13”. To the viewer left of this writing is the ridged slide used for battery testing. Above the ridged slide are the words “Batt. Contr.” with a solid arrow below. Below the battery information is the table of footcandle (LUX) equivalents. In the middle of the table is the zero adjustable screw with an arrow pointing in both directions. AT the very bottom painted on the surface is the location of manufacturing; “GERMANY (WEST)” above a cutout window revealing the patent number; “4D01673”. (b) There is also a black leather case with the object. The inside of the case has gray suede lining, which would have helped avoid scratching and marking of the meter. The case has been carefully designed to retrofit the meter, which is apparent through the tiny leather strap present when the case is opened. These designs allow the object to be formly held into place further safeguarding it. At the bottom of the case there is a black button that allows the case to be opened and fastened shut. When the case is fastened shut, the name of the manufacturer “Gossen” appears imprinted and is upside down. Below this, also upside down, “LUNASIX 3” has been applied in silver ink. Along the viewer right side the case has a cutout that perfectly fit the converter slide. On the rear “MADE IN GERMANY” appears in a receded box with protruding lettering. The bottom of the case, where the button is located, contains an opening for the black string to be strung through. The string, which has been tied to the exposure meter, measures 49.0 cm and has a metal piece holding the ends of the string in place. This would have given the user greater security when working with the exposure meter.
- Subject
- photography
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1123 a-b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1960
- Material
- cardboard; metal;
- Catalogue Number
- 110.01.0294 a-c
- Description
- Three empty boxes for 16 mm Cine-Kodak Kodachrome and Panchromatic Safety Films. Two boxes have the empty metal film reels inside. The exteriors of the boxes are covered in product and manufacturer details and, on the back, are shipping details for when the film has been developed - two are address…
1 image
- Title
- Film Box
- Date
- 1930 – 1960
- Material
- cardboard; metal;
- Dimensions
- 2.7 x 9.8 x 9.8 cm
- Description
- Three empty boxes for 16 mm Cine-Kodak Kodachrome and Panchromatic Safety Films. Two boxes have the empty metal film reels inside. The exteriors of the boxes are covered in product and manufacturer details and, on the back, are shipping details for when the film has been developed - two are addressed from Peter Whyte in Banff and one is addressed from “MRS PETER WHYTE” in Concord.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 110.01.0294 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- ca. 1947 – 1955
- Material
- metal; plastic; glass
- Catalogue Number
- 104.41.0285
- Description
- Small Kodax duaflex IV box camera. Plastic and metal body with faux leather look. The front of the camera has two lenses within a silver and brown metal plate. “KODAK Duaflex IV CAMERA” is printed above the lenses and “KODET LENS” is below. Te back of the camera opens to insert film. A long fabric …
1 image
- Title
- Film Camera
- Date
- ca. 1947 – 1955
- Material
- metal; plastic; glass
- Dimensions
- 12.5 x 9.0 cm
- Description
- Small Kodax duaflex IV box camera. Plastic and metal body with faux leather look. The front of the camera has two lenses within a silver and brown metal plate. “KODAK Duaflex IV CAMERA” is printed above the lenses and “KODET LENS” is below. Te back of the camera opens to insert film. A long fabric carrying strap is attached to the sides of the camera.
- Subject
- Internment camp
- photography
- world war II
- Credit
- Gift of David Monachello, Banff, 2021
- Catalogue Number
- 104.41.0285
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1940 – 1970
- Material
- metal;
- Catalogue Number
- 110.01.0291 a-c
- Description
- Three empty Kodak film canisters - two have yellow bodies and screw-on blue lids and one is plain silver with a lift off lid and “+352” scratched on top. Each canister is numbered on the bottom.
1 image
- Title
- Film Canisters
- Date
- 1940 – 1970
- Material
- metal;
- Dimensions
- 4.6 cm
- Description
- Three empty Kodak film canisters - two have yellow bodies and screw-on blue lids and one is plain silver with a lift off lid and “+352” scratched on top. Each canister is numbered on the bottom.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 110.01.0291 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.