Narrow Results By
- Date
- n.d.
- Material
- metal
- Catalogue Number
- 108.04.1165
- Description
- A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “LONGWARE” is engraved on the outside middle.
1 image
- Title
- Angle Piton
- Date
- n.d.
- Material
- metal
- Dimensions
- 2.70 x 15.0 cm
- Description
- A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “LONGWARE” is engraved on the outside middle.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1165
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- metal
- Catalogue Number
- 108.04.1166
- Description
- A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “HG” engraved on the inside along with “STUBAI AUSTRIA”
1 image
- Title
- Angle Piton
- Date
- n.d.
- Material
- metal
- Dimensions
- 2.0 x 15.5 cm
- Description
- A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “HG” engraved on the inside along with “STUBAI AUSTRIA”
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1166
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1955
- Material
- metal
- Catalogue Number
- 108.04.1168
- Description
- A hand-forged, chromalloy steel, angle piton with a welded ring attached. Engraved “STUBAI” below that “MADE IN AUSTRIA” and then “HG”.
1 image
- Title
- Angle Piton
- Date
- 1955
- Material
- metal
- Dimensions
- 2.4 x 16.0 cm
- Description
- A hand-forged, chromalloy steel, angle piton with a welded ring attached. Engraved “STUBAI” below that “MADE IN AUSTRIA” and then “HG”.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1168
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- metal
- Catalogue Number
- 108.04.1169
- Description
- A chromalloy steel, hand-forged angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through.
1 image
- Title
- Angle Piton
- Date
- n.d.
- Material
- metal
- Dimensions
- 1.50 x 16.0 cm
- Description
- A chromalloy steel, hand-forged angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1169
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Avalanche Transceiver
https://archives.whyte.org/en/permalink/artifact105.04.1013%20a%2cb
- Date
- 1980 – 1985
- Material
- metal; plastic; fibre
- Catalogue Number
- 105.04.1013 a,b
- Description
- Motronic “Pieps 2” avalanche beacon or transceiver. Orange plastic with metal parts. Labeled on side with “Pieps 2. Motronic. Made in Austria.” and instructions for use. Yellow fabric case with black cord marked “Pieps 2. Motronic. Canada.”
1 image
- Title
- Avalanche Transceiver
- Date
- 1980 – 1985
- Material
- metal; plastic; fibre
- Dimensions
- 11.7 x 7.0 cm
- Description
- Motronic “Pieps 2” avalanche beacon or transceiver. Orange plastic with metal parts. Labeled on side with “Pieps 2. Motronic. Made in Austria.” and instructions for use. Yellow fabric case with black cord marked “Pieps 2. Motronic. Canada.”
- Credit
- Gift of Douglas Leonard, Canmore, 1998
- Catalogue Number
- 105.04.1013 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1925 – 1935
- Material
- metal; fibre
- Catalogue Number
- 108.04.1001 a,b
- Description
- Pair crampons, one piece cut-out with 4 points and long cotton straps. 4 mm thick metal, centre bar is split on both ends and ends turned down into a point. At the centre 2 pieces go off at right angles and curved upward with a loop on the end. Rings enclosed in loops 3 cm dia. Long cotton twil…
- Title
- Crampons
- Date
- 1925 – 1935
- Material
- metal; fibre
- Dimensions
- 3.5 x 10.7 x 14.0 cm
- Description
- Pair crampons, one piece cut-out with 4 points and long cotton straps. 4 mm thick metal, centre bar is split on both ends and ends turned down into a point. At the centre 2 pieces go off at right angles and curved upward with a loop on the end. Rings enclosed in loops 3 cm dia. Long cotton twill straps 1.5 cm wide go through the rings. Incised into centre of both "Werkfulpmes 2".
- Subject
- sports
- climbing
- European Alps
- H.F. Hutchison
- Credit
- Gift of H.F. Hutchison, Rossland, 1984
- Catalogue Number
- 108.04.1001 a,b
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1940
- Material
- metal; skin
- Catalogue Number
- 108.04.1003 a,b
- Description
- Pair triangular, adjustable shape crampons with 8 points. ca. 15 mm steel bar form triangular shape, joined at toe, 5 holes in centre back for screw adjustment. 8 chisel points on bottom, opposite sides at same angle. A loop 2.5 cm high on each side holds a welded ring to which a leather strap i…
- Title
- Crampons
- Date
- 1920 – 1940
- Material
- metal; skin
- Dimensions
- 2.7 x 13.0 x 14.0 cm
- Description
- Pair triangular, adjustable shape crampons with 8 points. ca. 15 mm steel bar form triangular shape, joined at toe, 5 holes in centre back for screw adjustment. 8 chisel points on bottom, opposite sides at same angle. A loop 2.5 cm high on each side holds a welded ring to which a leather strap is attached with a buckle. Incised on to back bar and on leather rivet, a polar bear and "Schutzmarke. Peterlongo. Innsbruck.
- Credit
- Gift of Forrest (Pat) Oliver Brewster, Banff, 1966
- Catalogue Number
- 108.04.1003 a,b
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1940
- Material
- metal
- Catalogue Number
- 108.04.1004 a,b
- Description
- Pair of solid, cut out rectangular shape with 4 points. Solid piece 3.0mm thick, four corners bent down and cut into diagonal point, 3.0 cm from base. Centre 3.0 cm bent upwards into rectangular shape with cut out groove.
- Title
- Crampons
- Date
- 1920 – 1940
- Material
- metal
- Dimensions
- 5.5 x 8.9 x 11.2 cm
- Description
- Pair of solid, cut out rectangular shape with 4 points. Solid piece 3.0mm thick, four corners bent down and cut into diagonal point, 3.0 cm from base. Centre 3.0 cm bent upwards into rectangular shape with cut out groove.
- Credit
- Gift of Forrest (Pat) Oliver Brewster, Banff, 1966
- Catalogue Number
- 108.04.1004 a,b
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1925 – 1935
- Material
- metal; fibre
- Catalogue Number
- 108.04.1008 a,b
- Description
- Hinged, spiked shoe attachment with straps. Heavy steel platform of 2 horse-shaped pieces connected by steel bar, toe piece hinged for flexibility. Short crossbar at middle. 10 tall spikes 4.5 cm, ones at heel and toe extended and curled at top to hold metal rings. Curved steel bar around heel. …
1 image
- Title
- Crampons
- Date
- 1925 – 1935
- Material
- metal; fibre
- Dimensions
- 9.5 x 10.0 x 27.0 cm
- Description
- Hinged, spiked shoe attachment with straps. Heavy steel platform of 2 horse-shaped pieces connected by steel bar, toe piece hinged for flexibility. Short crossbar at middle. 10 tall spikes 4.5 cm, ones at heel and toe extended and curled at top to hold metal rings. Curved steel bar around heel. Long twilled canvas straps at toe to crisscross over boots and buckle at ends. Under central bar "R ?.B.O.T.S.E.?."
- Credit
- Gift of Cyril Paris, Banff, 1968
- Catalogue Number
- 108.04.1008 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1935 – 1945
- Material
- metal; skin
- Catalogue Number
- 108.04.1029 a,b
- Description
- Pair 2 piece ten pointed crampons with leather straps. Heel and sole piece is one piece with 6 spikes, 4.0 cm long, and 4 upturned loops for strap attachment. Centre piece is looped to connect with toe piece which has 4 spikes and 2 loops. Leather straps are rivetted with buckle.
1 image
- Title
- Crampons
- Date
- 1935 – 1945
- Material
- metal; skin
- Description
- Pair 2 piece ten pointed crampons with leather straps. Heel and sole piece is one piece with 6 spikes, 4.0 cm long, and 4 upturned loops for strap attachment. Centre piece is looped to connect with toe piece which has 4 spikes and 2 loops. Leather straps are rivetted with buckle.
- Credit
- Gift of Clifford J. White, Victoria, 1984
- Catalogue Number
- 108.04.1029 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.