Narrow Results By
Beaded Wristwatch
https://archives.whyte.org/en/permalink/artifact104.47.3001
- Date
- 1969
- Material
- glass; skin; metal
- Catalogue Number
- 104.47.3001
- Description
- Man's wristwatch, large grey face marked with “ELGIN,” “AUTOMATIC,” and “SWISS.” The numbers are marked with single silver bars, with double bars for the quarter and half hour marks. Wide blue and red heavily beaded wrist band with leather and metal buckle. Note in CRW's writing: "Rosalie Two Yo…
1 image
- Title
- Beaded Wristwatch
- Date
- 1969
- Material
- glass; skin; metal
- Dimensions
- 4.0 x 23.0 cm
- Description
- Man's wristwatch, large grey face marked with “ELGIN,” “AUTOMATIC,” and “SWISS.” The numbers are marked with single silver bars, with double bars for the quarter and half hour marks. Wide blue and red heavily beaded wrist band with leather and metal buckle. Note in CRW's writing: "Rosalie Two Youngman Dec 27th 1969."
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.47.3001
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1968
- Material
- stone
- Catalogue Number
- 103.01.0060
- Description
- A single carved Arctic owl, its wings erect, suggestions of eyes and bill. A hole bored through the soapstone for hanging, behind head and between wings.
1 image
- Title
- Pendant
- Date
- 1968
- Material
- stone
- Dimensions
- 3.0 x 1.0 x 2.0 cm
- Description
- A single carved Arctic owl, its wings erect, suggestions of eyes and bill. A hole bored through the soapstone for hanging, behind head and between wings.
- Subject
- adornment
- households
- Povungnituk
- crafts
- carving
- Inuit
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 103.01.0060
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1967 – 1967
- Material
- wood
- Catalogue Number
- 107.02.0001
- Description
- A carved wooden owl sitting on a very rough half-round section of log. The owl is painted dark brown with feather texture on wings, an orange face and breast. The owl has glass eyes. The side of the base is marked with a maker’s mark, “HAL” with letters joined together, and “Bieler 67” in red.
1 image
- Title
- Bird Figurine
- Date
- 1967 – 1967
- Material
- wood
- Dimensions
- 10.4; 5.0 (base) x 4.3; 10.0 (base) x 4.8; 9.0 (base) cm
- Description
- A carved wooden owl sitting on a very rough half-round section of log. The owl is painted dark brown with feather texture on wings, an orange face and breast. The owl has glass eyes. The side of the base is marked with a maker’s mark, “HAL” with letters joined together, and “Bieler 67” in red.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 107.02.0001
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Animal Figurine
https://archives.whyte.org/en/permalink/artifact107.02.0004
- Date
- 1967 – 1967
- Material
- plaster; wood
- Catalogue Number
- 107.02.0004
- Description
- A small carved plaster squirrel sitting on its haunches with its front paws clasped in front of its chest. The squirrel is painted dark brown with a white underbelly and is sitting on a green plaster mound. The plaster figurine is attached to a base of two cross sections of tree piled one atop th…
1 image
- Title
- Animal Figurine
- Date
- 1967 – 1967
- Material
- plaster; wood
- Dimensions
- 5.0; 5.3 (base) x 2.5; 6.0 (base) x 3.0; 7.1 (base) cm
- Description
- A small carved plaster squirrel sitting on its haunches with its front paws clasped in front of its chest. The squirrel is painted dark brown with a white underbelly and is sitting on a green plaster mound. The plaster figurine is attached to a base of two cross sections of tree piled one atop the other. The bottom is marked “Hal Bieler 67” in red.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 107.02.0004
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1967
- Material
- nylon; fibre
- Catalogue Number
- 103.05.0406
- Description
- A pair of navy blue homemade wind pants, which features stretchy waistband and velcro cuffs on each leg,
1 image
- Title
- Wind Pants
- Date
- 1967
- Material
- nylon; fibre
- Dimensions
- 36.9 x 81.5 cm
- Description
- A pair of navy blue homemade wind pants, which features stretchy waistband and velcro cuffs on each leg,
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 2003
- Catalogue Number
- 103.05.0406
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Figures Carving
https://archives.whyte.org/en/permalink/artifact107.02.1042
- Date
- 1966
- Material
- wood
- Catalogue Number
- 107.02.1042
- Description
- A crudely carved figure of a woman (Madonna) and child on a base carved out of one piece of hardwood. The woman’s head is about one-third the size of her body. She has hair to her chin and has closed eyes and mouth. Her left arm/hand is placed on the front of the child who is carved out of the fron…
1 image
- Title
- Figures Carving
- Date
- 1966
- Material
- wood
- Dimensions
- 56 x 8.5 cm
- Description
- A crudely carved figure of a woman (Madonna) and child on a base carved out of one piece of hardwood. The woman’s head is about one-third the size of her body. She has hair to her chin and has closed eyes and mouth. Her left arm/hand is placed on the front of the child who is carved out of the front of her body, his head just under her breasts. He is about two-thirds the size of the woman’s body, has closed eyes and mouth, and has his right arm in front of his body, under his mother’s hand. The woman appears to be wearing a two-piece long garment; the child has carved legs and his feet are resting on the base. The piece is signed on the bottom of the base by the maker carving out “H. Poirion”.
- Subject
- crafts
- carving
- woodwork
- Henri Poirion
- Credit
- Gift of Bill Roberge, Banff, 2007
- Catalogue Number
- 107.02.1042
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Membership Pin
https://archives.whyte.org/en/permalink/artifact103.09.1217
- Date
- 1963
- Material
- metal; enamel
- Catalogue Number
- 103.09.1217
- Description
- A circular Alpine Club Mountain Guide pin with a forest-green, enamel maple leaf centred on the pin face, edged in silver and with the letters “ACMG” in silver. The outer rim of the pin is a coiled climbing rope encircling it three times; at the bottom is a red enamel curved bar edged in silver wit…
1 image
- Title
- Membership Pin
- Date
- 1963
- Material
- metal; enamel
- Dimensions
- 37/8 cm
- Description
- A circular Alpine Club Mountain Guide pin with a forest-green, enamel maple leaf centred on the pin face, edged in silver and with the letters “ACMG” in silver. The outer rim of the pin is a coiled climbing rope encircling it three times; at the bottom is a red enamel curved bar edged in silver with “MOUNTAIN” on top and “GUIDE” below in silver. The stylized cut-out maple leaf has a flat one-dimensional pair of skis crossed with an ice axe underneath. Both extend onto the coiled rope rim. Stamped on the back of the pin at the centre and under the pin set is the number “27” and something indecipherable beneath. There is one horizontal long-hinged pin soldered on the back that is rivetted at one end and fastens at the other end (bottom) with a swivel-locking safety clasp.
- Credit
- Gift of Margaret Gmoser, Harvie Heights, 2008
- Catalogue Number
- 103.09.1217
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Summit Canister
https://archives.whyte.org/en/permalink/artifact105.02.1134
- Date
- 1961
- Material
- plastic
- Catalogue Number
- 105.02.1134
- Description
- Clear plastic pill container with lid, almost completely taped with white adhesive tape.
- Title
- Summit Canister
- Date
- 1961
- Material
- plastic
- Dimensions
- 7.0 cm
- Description
- Clear plastic pill container with lid, almost completely taped with white adhesive tape.
- Subject
- sports
- climbing
- Mount Bryce
- Credit
- Gift of Bill Corbett, Calgary, 1992
- Catalogue Number
- 105.02.1134
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960
- Material
- fibre; metal; plastic; elastic
- Catalogue Number
- 103.08.1150 a,b
- Description
- (a) One pair beige-coloured goggles with yellow lenses, triangular metal frames with fabric edging; ribbon around the metal portion, stretch nylon gussets and velveteen on the portion against the wearer’s face. , the second set wider spaced, has twine threaded through to attach the frame to the foa…
1 image
- Title
- Ski Goggles
- Date
- 1960
- Material
- fibre; metal; plastic; elastic
- Dimensions
- 5.0 x 13.0 cm
- Description
- (a) One pair beige-coloured goggles with yellow lenses, triangular metal frames with fabric edging; ribbon around the metal portion, stretch nylon gussets and velveteen on the portion against the wearer’s face. , the second set wider spaced, has twine threaded through to attach the frame to the foam rubber cushion around the metal. The eyepieces are connected by a piece of elastic fabric across the nose and an adjustable elastic head strap that has lost most of its elasticity and is held together by metal clips.(b) A round aluminum storage container, 7.2cm high and 6.7cm radius, with a screw-on lid. On the bottom engraved “Switzerland”.
- Subject
- sports
- winter
- skiing
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1989
- Catalogue Number
- 103.08.1150 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Climbing Piton
https://archives.whyte.org/en/permalink/artifact108.04.1157
- Date
- 1960
- Material
- metal
- Catalogue Number
- 108.04.1157
- Description
- A hand-forged, thin-blade piton for micro cracks called a ‘RURP’, an acronym for Realized Ultimate Reality Piton. The tapered blade is short and fine on the end; there are two holes on the wider, thicker end for rings. Engraved with “LONGWARE” and also “H G”.
1 image
- Title
- Climbing Piton
- Date
- 1960
- Material
- metal
- Dimensions
- 3.0 x 3.1 cm
- Description
- A hand-forged, thin-blade piton for micro cracks called a ‘RURP’, an acronym for Realized Ultimate Reality Piton. The tapered blade is short and fine on the end; there are two holes on the wider, thicker end for rings. Engraved with “LONGWARE” and also “H G”.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1157
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960
- Material
- metal
- Catalogue Number
- 108.04.1159 a-d
- Description
- A carabiner with three pitons hanging from it:(a) an aluminum carabiner (10.5X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a met…
1 image
- Title
- Climbing Piton
- Date
- 1960
- Material
- metal
- Description
- A carabiner with three pitons hanging from it:(a) an aluminum carabiner (10.5X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a metal piton (14.5x3.3cm wide) with the blade, instead of being flat, is positioned slightly sideways; engraved in script on the ‘handle’ portion “Charlet Moser” in block letters “CHAMONIX” . There is a white shop label glued on one side of the blade, in blue lettering “3 7 Premier Cycle & Sports 110 F”.(c) a trowel-shaped vertical piton (11.5x3.0cm), thin flat blade and high raised ‘handle’. This type of knife or blade was very popular in the Rockies. Commonly called the ‘Ace of Spades’. Raised “0” on the blade and “R. CASSIN” on viewer’s right and “ITALY” on the other. an “0” on the top part of the blade. Remnants of a piece of tape “1/74” indiscernable.(d) a hand-forged horizontal piton with a flat blade at one end and raised ‘handle’ at the other with a round hole to put a carabiner through. ‘LOST”, the diamond-shaped logo, “ARROW”.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1159 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960
- Material
- metal
- Catalogue Number
- 108.04.1161 a-c
- Description
- A carabiner with two pitons attached:(a) a thick, soft iron D-ring carabiner (10.3x6.7cm wide) with a hinged gate, but no safety bar. Stencilled in “H G”, followed by engraved “CASSIN” surrounded by part oval logo.(b) a horizontal piton (16.5cmx4.0cm wide) made out of soft iron, with a flat blade a…
1 image
- Title
- Climbing Piton
- Date
- 1960
- Material
- metal
- Description
- A carabiner with two pitons attached:(a) a thick, soft iron D-ring carabiner (10.3x6.7cm wide) with a hinged gate, but no safety bar. Stencilled in “H G”, followed by engraved “CASSIN” surrounded by part oval logo.(b) a horizontal piton (16.5cmx4.0cm wide) made out of soft iron, with a flat blade at one end and raised ‘handle’ at the other with a round hole to put a carabiner through. Engraved on the handle “AUSTRIA STUBAI”. A yellow sales label with black printing “BAROTTO CALGARY “$1.10 EA”. Hand printed in green ink “VERTICAL”.(c) a vertical piton (16.5x3.8cm wide) made out of soft iron, with flat blade and handle, engraved “MADE IN AUSTRIA STUBAI” remnants of a shop’s yellow sales label with black lettering “BAROTTO CALGAR” with the Y partially missing.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1161 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Summit Canister
https://archives.whyte.org/en/permalink/artifact105.02.1046
- Date
- prior to 1980
- Material
- metal; rubber; fibre
- Catalogue Number
- 105.02.1046
- Description
- Summit register and container from Mount Louis. A narrow (5.0 diameter), long (20.0 high), metal cylinder, somewhat rusty,topped by a black, rubber cork (chewed), two link chains are attached to a metal ring on the cylinder's side, one runs to a similar ring on top of the rubber cork, the other han…
1 image
- Title
- Summit Canister
- Date
- prior to 1980
- Material
- metal; rubber; fibre
- Dimensions
- 20.0 cm
- Description
- Summit register and container from Mount Louis. A narrow (5.0 diameter), long (20.0 high), metal cylinder, somewhat rusty,topped by a black, rubber cork (chewed), two link chains are attached to a metal ring on the cylinder's side, one runs to a similar ring on top of the rubber cork, the other hangs free with frayed and broken string on the loose end.
- Subject
- sports
- climbing
- Mount Louis
- Credit
- Gift of Parks Canada, Banff, 1980
- Catalogue Number
- 105.02.1046
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Summit Canister
https://archives.whyte.org/en/permalink/artifact105.02.1098
- Date
- 1960 – 1969
- Material
- metal
- Catalogue Number
- 105.02.1098
- Description
- Very rusty tin can, Mount Stephen,typical tin can, rusted inside and out. Jaggedly cut opening (in can).
1 image
- Title
- Summit Canister
- Date
- 1960 – 1969
- Material
- metal
- Dimensions
- 11.6 cm
- Description
- Very rusty tin can, Mount Stephen,typical tin can, rusted inside and out. Jaggedly cut opening (in can).
- Subject
- sports
- climbing
- Mount Stephen
- Credit
- Gift of Graeme Pole, Field, 1987
- Catalogue Number
- 105.02.1098
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1970
- Material
- metal
- Catalogue Number
- 108.04.1046 a-g
- Description
- One piece with screw and handle. .7 dia. round steel, pointed screw on end, straight rod bent to form open handle. End turned around rod. Painted red except (d) has red and yellow remnants (a): 17.5 x 6.4 (b-d): 16.0x6.5 (e-g): 12.0x6.7.
1 image
- Title
- Ice Screws
- Date
- 1960 – 1970
- Material
- metal
- Description
- One piece with screw and handle. .7 dia. round steel, pointed screw on end, straight rod bent to form open handle. End turned around rod. Painted red except (d) has red and yellow remnants (a): 17.5 x 6.4 (b-d): 16.0x6.5 (e-g): 12.0x6.7.
- Subject
- sports
- climbing
- Chic Scott
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 1987
- Catalogue Number
- 108.04.1046 a-g
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1970
- Material
- metal
- Catalogue Number
- 108.04.1047 a-d
- Description
- Various shaped blades (a) 8.2x2.7x2.8, blade off to the side (b) 7.8x4.0x1.8, blade centered, tip turned down, "3" stamped on blade (c) 8.3x3.7x2.3, blade centered, "50"stamped on blade (d) 9.0x4.0x1.2, blade centered. "8" stamped on blade.
1 image
- Title
- Climbing Piton
- Date
- 1960 – 1970
- Material
- metal
- Description
- Various shaped blades (a) 8.2x2.7x2.8, blade off to the side (b) 7.8x4.0x1.8, blade centered, tip turned down, "3" stamped on blade (c) 8.3x3.7x2.3, blade centered, "50"stamped on blade (d) 9.0x4.0x1.2, blade centered. "8" stamped on blade.
- Subject
- sports
- climbing
- Chic Scott
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 1987
- Catalogue Number
- 108.04.1047 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Climbing Ascenders
https://archives.whyte.org/en/permalink/artifact108.04.1048%20a%2cb
- Date
- 1960 – 1970
- Material
- metal
- Catalogue Number
- 108.04.1048 a,b
- Description
- Cast aluminum, Chic Scott's, pair "Hiebler Steigklemme" 2 part construction, 10.0 long bar with 1.5 dia. rope hole on end. Other end has a shaped brake clamp, spring loaded. Manufacturer's stamp on side bar: "SALEWA", other side "Jn.U.A.Pat.ang.".
1 image
- Title
- Climbing Ascenders
- Date
- 1960 – 1970
- Material
- metal
- Dimensions
- 6.0 x 11.0 cm
- Description
- Cast aluminum, Chic Scott's, pair "Hiebler Steigklemme" 2 part construction, 10.0 long bar with 1.5 dia. rope hole on end. Other end has a shaped brake clamp, spring loaded. Manufacturer's stamp on side bar: "SALEWA", other side "Jn.U.A.Pat.ang.".
- Subject
- sports
- climbing
- Chic Scott
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 1987
- Catalogue Number
- 108.04.1048 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Climbing Taperlocks
https://archives.whyte.org/en/permalink/artifact108.04.1049%20a-c
- Date
- 1960 – 1970
- Material
- metal; plastic
- Catalogue Number
- 108.04.1049 a-c
- Description
- Aluminum wedges with cables, Chic Scott's (a) 3.8x2.3, wedge shape tapers from 2.3 to 1.2, .4 dia. cable, ca. 30.0 long, passes through 2 holes in wedge in a loop, red plastic hand/rope holdover loop, blue plastic keeper near wedge. ca. 2.0 aluminum join (b,c) sameas (a) but smaller wedge: 1…
1 image
- Title
- Climbing Taperlocks
- Date
- 1960 – 1970
- Material
- metal; plastic
- Description
- Aluminum wedges with cables, Chic Scott's (a) 3.8x2.3, wedge shape tapers from 2.3 to 1.2, .4 dia. cable, ca. 30.0 long, passes through 2 holes in wedge in a loop, red plastic hand/rope holdover loop, blue plastic keeper near wedge. ca. 2.0 aluminum join (b,c) sameas (a) but smaller wedge: 1.3x.9 tapers to .7, no plastic hand/rope grip. Red plastic keepers. Manufacturer's stamp on side of wedge "CLOG".
- Subject
- sports
- climbing
- Chic Scott
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 1987
- Catalogue Number
- 108.04.1049 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1970
- Material
- metal
- Catalogue Number
- 108.04.1050
- Description
- TITON climbing nut, aluminum, Jon Jones'. Solid aluminum, central bar has base 7.5x5.8 with other end 5.5x4.2. 2round holes 1.3 dia. in each end centered both sides of central bar. Stamped one side of bar: "3" and "COLORADO NY", scratched on base "JON". Can be wedged in big crack for holding car…
1 image
- Title
- Climbing Nut
- Date
- 1960 – 1970
- Material
- metal
- Dimensions
- 7.5 x 5.8 x 7.7 cm
- Description
- TITON climbing nut, aluminum, Jon Jones'. Solid aluminum, central bar has base 7.5x5.8 with other end 5.5x4.2. 2round holes 1.3 dia. in each end centered both sides of central bar. Stamped one side of bar: "3" and "COLORADO NY", scratched on base "JON". Can be wedged in big crack for holding carabiner or rope.
- Subject
- sports
- climbing
- Chic Scott
- Jon Jones
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 1987
- Catalogue Number
- 108.04.1050
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Climbing Brake Bar
https://archives.whyte.org/en/permalink/artifact108.04.1051
- Date
- 1960 – 1965
- Material
- metal
- Catalogue Number
- 108.04.1051
- Description
- 3 piece brake bar, Chic Scott's. Each loop 1.0 dia. rod, 10.2x5.0, with 5.5 long gate opening. 2 outer loops have a solid locking bar 6.3x1.5, one side rounded. "Cmi" stamped on crossbars, system caused extreme wear on ropes, and fell into disrepute.
1 image
- Title
- Climbing Brake Bar
- Date
- 1960 – 1965
- Material
- metal
- Description
- 3 piece brake bar, Chic Scott's. Each loop 1.0 dia. rod, 10.2x5.0, with 5.5 long gate opening. 2 outer loops have a solid locking bar 6.3x1.5, one side rounded. "Cmi" stamped on crossbars, system caused extreme wear on ropes, and fell into disrepute.
- Subject
- sports
- climbing
- Chic Scott
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 1987
- Catalogue Number
- 108.04.1051
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.