Narrow Results By
- Date
- 1986
- Material
- keratin; skin; hair; wood; metal
- Catalogue Number
- 112.01.1019
- Description
- A pair of mounted deer antlers with part of the hair-covered head on a wood plaque. On viewer’s left the antler has two large points, one small point, and one projection (to be counted as a point the projection has to be over 1 inch). Viewer’s left: the first curved point closest to the viewer is 3…
1 image
- Title
- Deer Horns
- Date
- 1986
- Material
- keratin; skin; hair; wood; metal
- Description
- A pair of mounted deer antlers with part of the hair-covered head on a wood plaque. On viewer’s left the antler has two large points, one small point, and one projection (to be counted as a point the projection has to be over 1 inch). Viewer’s left: the first curved point closest to the viewer is 34.0cm in length; it is dividing at the end with a 2.0cm length projection. The curved point behind is 30.5cm; at the base of the antler it has a 9.0cm point with a 1.0cm projection. On the viewer’s right the curved antler has three points. At the base of the antler the smallest point is 12.0cm; the inward curving point closest to the viewer’s right measures 39.0cm in length and the one behind is 33.25cm in length. The depth of each antler is 10.0cm. The point span at its largest is 29.50cm, the next 28.0cm. The head part has brown/red hair, with much lighter hair on each side. The top of the head part between the antlers is 7.50cm; the base is 12.7cm. Measurements for the head part is 9.0cm x12.0cm wide, and depth 5.0cm. There are two screws through the head part to attach the antlers to the plaque. The screw on the viewer’s left, is 4.0cm from the head part base and the screw on the viewer’s right is 5.0cm from the head part base. The plaque is a shield-shaped piece of dark brown varnished wood measuring 28.0cmx26.0cm wide, and 1.0cm depth. There is a screw 3.0cm from the top to attach it to the wall. Underneath this the word “GEM” is carved into the wood. At the bottom of the plaque underneath the antlers and head part the number “86” is carved.Note: These antlers are screwed to the wall of the ‘Trading Post’ in the Luxton exhibition “Stuff of Legend” so it was hard to measure.
- Credit
- Gift of Albert Maitland Perrin, 2007
- Catalogue Number
- 112.01.1019
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Tracking the Moose
https://archives.whyte.org/en/permalink/artifactkrc.02.02
- Date
- prior to 1878
- Medium
- oil on canvas
- Catalogue Number
- KrC.02.02
- Description
- General colour: grey, green, blue, pink. A figure wearing snow shoes, a green coat with a red sash and a red tam with feathers in it, carries a rifle over his right shoulder and trudges to the left. Behind to the right is a snow covered rock. To the left are trees. Grey clouds in a pink and blue sk…
1 image
- Title
- Tracking the Moose
- Date
- prior to 1878
- Medium
- oil on canvas
- Dimensions
- 21.9 x 26.1 cm
- Description
- General colour: grey, green, blue, pink. A figure wearing snow shoes, a green coat with a red sash and a red tam with feathers in it, carries a rifle over his right shoulder and trudges to the left. Behind to the right is a snow covered rock. To the left are trees. Grey clouds in a pink and blue sky come down to meet a distant hill.
- Subject
- figure, male
- winter
- hunting
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1971
- Catalogue Number
- KrC.02.02
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1900
- Material
- metal, steel; metal, brass; skin
- Catalogue Number
- 104.05.0026 a,b
- Description
- A strong, single edged hunting knife with a cross piece. The hilt of the knife is made of brass, and covered with leather. The blade is marked “Collins and Co. Hartford Serofino #17 (Galidad)”. (b) Sheath made of leather with steel tip and steel detailing. Leather is embossed with crown and leav…
1 image
- Title
- Bowie Knife
- Date
- 1850 – 1900
- Material
- metal, steel; metal, brass; skin
- Dimensions
- 4.5 (widest point) x 37.0 cm
- Description
- A strong, single edged hunting knife with a cross piece. The hilt of the knife is made of brass, and covered with leather. The blade is marked “Collins and Co. Hartford Serofino #17 (Galidad)”. (b) Sheath made of leather with steel tip and steel detailing. Leather is embossed with crown and leaves. “LEGITIMUS” is stamped under the crown and the number ”10” is stamped on a cross piece above.
- Subject
- households
- hunting
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.05.0026 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
With Scabbard Cutlass
https://archives.whyte.org/en/permalink/artifact104.05.0049%20a%2cb
- Date
- 1850 – 1925
- Material
- metal; wood
- Catalogue Number
- 104.05.0049 a,b
- Description
- A cutlass with wooden handle and scabbard trimmed with brass. (a) cutlass, knife with short thick curved blade inlaid with ornate silver organic and geometric pattern on one side. Thick brass S-shaped guard at hilt, handle of dark brown wood with inlaid brass diamond shape on either side, and tu…
1 image
- Title
- With Scabbard Cutlass
- Date
- 1850 – 1925
- Material
- metal; wood
- Dimensions
- 7.5 x 2.3 x 41.0 cm
- Description
- A cutlass with wooden handle and scabbard trimmed with brass. (a) cutlass, knife with short thick curved blade inlaid with ornate silver organic and geometric pattern on one side. Thick brass S-shaped guard at hilt, handle of dark brown wood with inlaid brass diamond shape on either side, and turned brass cap at ends with floral medallion at tip. (b) scabbard, slightly curved wooden scabbard shaped to fit blade. Wide brass band at mouth has moth shaped plaque, with incised features, standing out from one side. Tip covered with wide brass band and small knob at end. Single narrow brass band girds middle of scabbard, with indication on wood that there may have been another band at one time .
- Subject
- warfare
- hunting
- fighting
- Japanese
- Edward S. Morse
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0049 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1900
- Material
- metal
- Catalogue Number
- 104.10.0028
- Description
- A flattened sack shaped metal flask with round bottom and long neck and seam along sides. Round brass collar at top of neck where flat round cap screws on. Cap has finger trigger at side which operates a shutter mechanism across a hole in the cap's centre surrounded by a threaded lip in order to em…
1 image
- Title
- Shot Flask
- Date
- 1850 – 1900
- Material
- metal
- Dimensions
- 3.5 x 8.8 x 17.7 cm
- Description
- A flattened sack shaped metal flask with round bottom and long neck and seam along sides. Round brass collar at top of neck where flat round cap screws on. Cap has finger trigger at side which operates a shutter mechanism across a hole in the cap's centre surrounded by a threaded lip in order to empty a measure of shot. Contains very small 1 mm round lead shot pellets. Stamped on brass cap "Improved best quality Sykes patent"
- Subject
- activities
- hunting
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.10.0028
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1910
- Material
- horn; skin
- Catalogue Number
- 104.10.0029
- Description
- Very old dried and cracked bison? horn with tip broken off to leave small hole. Strap of buckskin thong tied around at tip and attached to another thong tied around at open broad end of horn.
1 image
- Title
- Powder Horn
- Date
- 1850 – 1910
- Material
- horn; skin
- Dimensions
- 5.7 x 4.3 x 21.0 cm
- Description
- Very old dried and cracked bison? horn with tip broken off to leave small hole. Strap of buckskin thong tied around at tip and attached to another thong tied around at open broad end of horn.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.10.0029
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1925
- Material
- stone
- Catalogue Number
- 104.24.0005
- Description
- Long thin flat piece of black stone, pointed at one end and with rounded point at other. One long side flat, the other bevelled to an edge.
1 image
- Title
- Hide Scraper
- Date
- 1850 – 1925
- Material
- stone
- Dimensions
- 0.8 x 3.5 x 16.6 cm
- Description
- Long thin flat piece of black stone, pointed at one end and with rounded point at other. One long side flat, the other bevelled to an edge.
- Subject
- Indigenous
- households
- hunting
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.24.0005
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1925
- Material
- wood; metal; skin; glass
- Catalogue Number
- 104.49.0004
- Description
- Very narrow thick steel blade flattened and flaring to curved edge with square hole at back for handle, blade painted yellow ochre colour. Handle seems a much newer commercial handle which has been cut off at the end and shaved to fit into hatchet head with a wooden wedge driven in to tighten. Han…
1 image
- Title
- Tomahawk Ax
- Date
- 1850 – 1925
- Material
- wood; metal; skin; glass
- Dimensions
- 3.2 x 13.5 x 37.0 cm
- Description
- Very narrow thick steel blade flattened and flaring to curved edge with square hole at back for handle, blade painted yellow ochre colour. Handle seems a much newer commercial handle which has been cut off at the end and shaved to fit into hatchet head with a wooden wedge driven in to tighten. Handle wrapped at middle with loose fringed buckskin band, 11 cm, which is completely covered with a background of medium blue beads containing three bars of green beads outlined with dark blue beads. Bottom of handle wrapped with a wide fringed band of buckskin, 14 cm , sewn to fit along its length with black thread. Thong tied around top with long strip of untanned hide with white hairy surface.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.49.0004
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- c. 1860
- Material
- metal; antler
- Catalogue Number
- 104.19.1062
- Description
- Long, pointed steel blade is inserted into antler handle and fixed with 3 metal rivets.
1 image
- Title
- Butcher Knife
- Date
- c. 1860
- Material
- metal; antler
- Dimensions
- 33.0 cm
- Description
- Long, pointed steel blade is inserted into antler handle and fixed with 3 metal rivets.
- Subject
- Indigenous
- hunting
- Credit
- Purchased from Alan McClelland, Banff, 1984
- Catalogue Number
- 104.19.1062
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.