Narrow Results By
Tracking the Moose
https://archives.whyte.org/en/permalink/artifactkrc.02.02
- Date
- prior to 1878
- Medium
- oil on canvas
- Catalogue Number
- KrC.02.02
- Description
- General colour: grey, green, blue, pink. A figure wearing snow shoes, a green coat with a red sash and a red tam with feathers in it, carries a rifle over his right shoulder and trudges to the left. Behind to the right is a snow covered rock. To the left are trees. Grey clouds in a pink and blue sk…
1 image
- Title
- Tracking the Moose
- Date
- prior to 1878
- Medium
- oil on canvas
- Dimensions
- 21.9 x 26.1 cm
- Description
- General colour: grey, green, blue, pink. A figure wearing snow shoes, a green coat with a red sash and a red tam with feathers in it, carries a rifle over his right shoulder and trudges to the left. Behind to the right is a snow covered rock. To the left are trees. Grey clouds in a pink and blue sky come down to meet a distant hill.
- Subject
- figure, male
- winter
- hunting
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1971
- Catalogue Number
- KrC.02.02
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1900
- Material
- metal, steel; metal, brass; skin
- Catalogue Number
- 104.05.0026 a,b
- Description
- A strong, single edged hunting knife with a cross piece. The hilt of the knife is made of brass, and covered with leather. The blade is marked “Collins and Co. Hartford Serofino #17 (Galidad)”. (b) Sheath made of leather with steel tip and steel detailing. Leather is embossed with crown and leav…
1 image
- Title
- Bowie Knife
- Date
- 1850 – 1900
- Material
- metal, steel; metal, brass; skin
- Dimensions
- 4.5 (widest point) x 37.0 cm
- Description
- A strong, single edged hunting knife with a cross piece. The hilt of the knife is made of brass, and covered with leather. The blade is marked “Collins and Co. Hartford Serofino #17 (Galidad)”. (b) Sheath made of leather with steel tip and steel detailing. Leather is embossed with crown and leaves. “LEGITIMUS” is stamped under the crown and the number ”10” is stamped on a cross piece above.
- Subject
- households
- hunting
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.05.0026 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
With Scabbard Cutlass
https://archives.whyte.org/en/permalink/artifact104.05.0049%20a%2cb
- Date
- 1850 – 1925
- Material
- metal; wood
- Catalogue Number
- 104.05.0049 a,b
- Description
- A cutlass with wooden handle and scabbard trimmed with brass. (a) cutlass, knife with short thick curved blade inlaid with ornate silver organic and geometric pattern on one side. Thick brass S-shaped guard at hilt, handle of dark brown wood with inlaid brass diamond shape on either side, and tu…
1 image
- Title
- With Scabbard Cutlass
- Date
- 1850 – 1925
- Material
- metal; wood
- Dimensions
- 7.5 x 2.3 x 41.0 cm
- Description
- A cutlass with wooden handle and scabbard trimmed with brass. (a) cutlass, knife with short thick curved blade inlaid with ornate silver organic and geometric pattern on one side. Thick brass S-shaped guard at hilt, handle of dark brown wood with inlaid brass diamond shape on either side, and turned brass cap at ends with floral medallion at tip. (b) scabbard, slightly curved wooden scabbard shaped to fit blade. Wide brass band at mouth has moth shaped plaque, with incised features, standing out from one side. Tip covered with wide brass band and small knob at end. Single narrow brass band girds middle of scabbard, with indication on wood that there may have been another band at one time .
- Subject
- warfare
- hunting
- fighting
- Japanese
- Edward S. Morse
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0049 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
And Scabbard Sword
https://archives.whyte.org/en/permalink/artifact104.05.0050%20a%2cb
- Date
- 1850 – 1909
- Material
- metal; wood; skin
- Catalogue Number
- 104.05.0050 a,b
- Description
- A small narrow sword with wooden scabbard and handle shaped like angular dragon's head. (a) sword, small with thin, narrow, sharply pointed blade, of one piece with handle which is shaped like angular dragon head on long neck. Blade is inlaid with strips of bronze on each side and along spine with …
1 image
- Title
- And Scabbard Sword
- Date
- 1850 – 1909
- Material
- metal; wood; skin
- Dimensions
- 3.6 x 3.5 x 53.5 cm
- Description
- A small narrow sword with wooden scabbard and handle shaped like angular dragon's head. (a) sword, small with thin, narrow, sharply pointed blade, of one piece with handle which is shaped like angular dragon head on long neck. Blade is inlaid with strips of bronze on each side and along spine with incised geometric designs, and a double notch cut into spine on each side near the middle. Handle is overlaid with bronze strips into which designs and features of dragon have been cut. (b) scabbard, made of two pieces of wood shaped to fit the blade and held together with five metal strips around the outside, evenly spaced along length, one strap missing. Front side completely carved with intricate geometric design and small slit carved out near top through which is tied a leather thong.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0050 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
And Scabbard Dagger
https://archives.whyte.org/en/permalink/artifact104.05.0056%20a%2cb
- Date
- 1850 – 1920
- Material
- wood; metal
- Catalogue Number
- 104.05.0056 a,b
- Description
- A long straight knife with fluted wooden handle and scabbard ornately trimmed with brass. (a) dagger, short, narrow, pointed, double edged steel blade with small, dark, fluted wooden handle. Blade guard, cast of brass with raised curlicue design, turns upward at sides, handle tip of cast brass wit…
1 image
- Title
- And Scabbard Dagger
- Date
- 1850 – 1920
- Material
- wood; metal
- Dimensions
- 1.7 x 3.3 x 24.5 cm
- Description
- A long straight knife with fluted wooden handle and scabbard ornately trimmed with brass. (a) dagger, short, narrow, pointed, double edged steel blade with small, dark, fluted wooden handle. Blade guard, cast of brass with raised curlicue design, turns upward at sides, handle tip of cast brass with similar design and small lug with hole through at one side Note: blade guard loose; wooden handle cracked along length; blade pitted. (b) scabbard, narrow and straight, made of two pieces of wood held together by two rings of heavy cast brass with raised floral motifs, becoming oval medallions on one side with cast relief of dragon like figures. Cast brass bands at mouth and tip repeat dragon floral motif of other two bands and have floral motif cut through exposing pebbly stone inlay in wood. Brass ring near top with small brass loop on one side.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0056 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
And Scabbard Kris
https://archives.whyte.org/en/permalink/artifact104.05.0059%20a%2cb
- Date
- 1850 – 1934
- Material
- metal; wood; stone
- Catalogue Number
- 104.05.0059 a,b
- Description
- Kris with carved light coloured wooden handle, collar of pink stones between it and blade, and wooden scabbard of light colour with dark splotches and large organic cover for sword guard. (a) kris, long, narrow, pointed, double edged blade flaring out at shoulders which have ornate, lacy edges and…
1 image
- Title
- And Scabbard Kris
- Date
- 1850 – 1934
- Material
- metal; wood; stone
- Dimensions
- 2.5 x 9.0 x 52.8 cm
- Description
- Kris with carved light coloured wooden handle, collar of pink stones between it and blade, and wooden scabbard of light colour with dark splotches and large organic cover for sword guard. (a) kris, long, narrow, pointed, double edged blade flaring out at shoulders which have ornate, lacy edges and deep double groove incised on either side of blade. Handle is an angular, carved block of wood with a wide band of ebony girding its middle. Small brass ring set in with round pink stones jade? at junction between blade and handle. (b) scabbard, carved of light coloured wood with dark patches. Straight, wide, and rounded at tip with large, flat, rounded crosspiece at mouth. Opening elongated at one end to accept wide shoulder of blade, and crosspiece slightly carved to accentuate shape. Dark splotches of heartwood form organic patterns on the lighter wood of the scabbard.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0059 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
And Scabbard Knife
https://archives.whyte.org/en/permalink/artifact104.05.0060%20a%2cb
- Date
- 1850 – 1935
- Material
- metal; shell; wood
- Catalogue Number
- 104.05.0060 a,b
- Description
- Knife with carved pistol grip handle and flame like carved piece at mouth of wooden scabbard. (a) knife, thin, curved, pointed steel blade with handle carved of greenish tortoiseshell ? shaped like a simple pistol grip. Deep single groove incised at each side at top near hilt. Blade joined to hand…
1 image
- Title
- And Scabbard Knife
- Date
- 1850 – 1935
- Material
- metal; shell; wood
- Dimensions
- 4.6 x 2.6 x 33.8 cm
- Description
- Knife with carved pistol grip handle and flame like carved piece at mouth of wooden scabbard. (a) knife, thin, curved, pointed steel blade with handle carved of greenish tortoiseshell ? shaped like a simple pistol grip. Deep single groove incised at each side at top near hilt. Blade joined to handle with roughly formed collar of grey metal. Note: hairline cracks in handle along grain, blade pitted and rusted. (b) scabbard, simple, slightly curved, wood with hoof like ebony tip. Band of tortoiseshell ? at opening carved in shape of flame or flowing leaf sticking out to one side. Round hole drilled through top, five thin lines incised across wood spaced evenly along length of scabbard. Small patches of glossy black material in a few places, and a black colour in the grain of the wood indicate that the wood may have been once enamelled black
- Subject
- warfare
- fighting
- Japanese
- Edward S. Morse
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0060 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Practice Sword
https://archives.whyte.org/en/permalink/artifact104.05.0063
- Date
- 1850 – 1900
- Material
- wood
- Catalogue Number
- 104.05.0063
- Description
- Light brown varnished, one piece carved wood sword handle carved in swirl design with leaf butt chipped at blade end blade double edged, but not sharp
1 image
- Title
- Practice Sword
- Date
- 1850 – 1900
- Material
- wood
- Dimensions
- 3.5 x 2.4 x 65.8 cm
- Description
- Light brown varnished, one piece carved wood sword handle carved in swirl design with leaf butt chipped at blade end blade double edged, but not sharp
- Subject
- fighting
- Japanese
- Edward S. Morse
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0063
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1900
- Material
- metal
- Catalogue Number
- 104.10.0028
- Description
- A flattened sack shaped metal flask with round bottom and long neck and seam along sides. Round brass collar at top of neck where flat round cap screws on. Cap has finger trigger at side which operates a shutter mechanism across a hole in the cap's centre surrounded by a threaded lip in order to em…
1 image
- Title
- Shot Flask
- Date
- 1850 – 1900
- Material
- metal
- Dimensions
- 3.5 x 8.8 x 17.7 cm
- Description
- A flattened sack shaped metal flask with round bottom and long neck and seam along sides. Round brass collar at top of neck where flat round cap screws on. Cap has finger trigger at side which operates a shutter mechanism across a hole in the cap's centre surrounded by a threaded lip in order to empty a measure of shot. Contains very small 1 mm round lead shot pellets. Stamped on brass cap "Improved best quality Sykes patent"
- Subject
- activities
- hunting
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.10.0028
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1910
- Material
- horn; skin
- Catalogue Number
- 104.10.0029
- Description
- Very old dried and cracked bison? horn with tip broken off to leave small hole. Strap of buckskin thong tied around at tip and attached to another thong tied around at open broad end of horn.
1 image
- Title
- Powder Horn
- Date
- 1850 – 1910
- Material
- horn; skin
- Dimensions
- 5.7 x 4.3 x 21.0 cm
- Description
- Very old dried and cracked bison? horn with tip broken off to leave small hole. Strap of buckskin thong tied around at tip and attached to another thong tied around at open broad end of horn.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.10.0029
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1925
- Material
- stone
- Catalogue Number
- 104.24.0005
- Description
- Long thin flat piece of black stone, pointed at one end and with rounded point at other. One long side flat, the other bevelled to an edge.
1 image
- Title
- Hide Scraper
- Date
- 1850 – 1925
- Material
- stone
- Dimensions
- 0.8 x 3.5 x 16.6 cm
- Description
- Long thin flat piece of black stone, pointed at one end and with rounded point at other. One long side flat, the other bevelled to an edge.
- Subject
- Indigenous
- households
- hunting
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.24.0005
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1850 – 1925
- Material
- wood; metal; skin; glass
- Catalogue Number
- 104.49.0004
- Description
- Very narrow thick steel blade flattened and flaring to curved edge with square hole at back for handle, blade painted yellow ochre colour. Handle seems a much newer commercial handle which has been cut off at the end and shaved to fit into hatchet head with a wooden wedge driven in to tighten. Han…
1 image
- Title
- Tomahawk Ax
- Date
- 1850 – 1925
- Material
- wood; metal; skin; glass
- Dimensions
- 3.2 x 13.5 x 37.0 cm
- Description
- Very narrow thick steel blade flattened and flaring to curved edge with square hole at back for handle, blade painted yellow ochre colour. Handle seems a much newer commercial handle which has been cut off at the end and shaved to fit into hatchet head with a wooden wedge driven in to tighten. Handle wrapped at middle with loose fringed buckskin band, 11 cm, which is completely covered with a background of medium blue beads containing three bars of green beads outlined with dark blue beads. Bottom of handle wrapped with a wide fringed band of buckskin, 14 cm , sewn to fit along its length with black thread. Thong tied around top with long strip of untanned hide with white hairy surface.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.49.0004
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- c. 1860
- Material
- metal; antler
- Catalogue Number
- 104.19.1062
- Description
- Long, pointed steel blade is inserted into antler handle and fixed with 3 metal rivets.
1 image
- Title
- Butcher Knife
- Date
- c. 1860
- Material
- metal; antler
- Dimensions
- 33.0 cm
- Description
- Long, pointed steel blade is inserted into antler handle and fixed with 3 metal rivets.
- Subject
- Indigenous
- hunting
- Credit
- Purchased from Alan McClelland, Banff, 1984
- Catalogue Number
- 104.19.1062
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.