Narrow Results By
- Date
- 1968 – 1968
- Material
- plastic; fabric; paper;
- Catalogue Number
- 103.09.0389
- Description
- A square paper name tag inside a yellow plastic sleeve with a safety pin attached to the back and a black nylon cord for hanging around the neck. The name tag has “EDDIE HUNTER” written in blue ink at the top, a logo along the left-hand side, and “duMAURIER INTERNATIONAL / FEB. 27-28 / MARCH 1 / PH…
1 image
- Title
- Name Tag
- Date
- 1968 – 1968
- Material
- plastic; fabric; paper;
- Dimensions
- 1.3 x 6.3 x 44.1 cm
- Description
- A square paper name tag inside a yellow plastic sleeve with a safety pin attached to the back and a black nylon cord for hanging around the neck. The name tag has “EDDIE HUNTER” written in blue ink at the top, a logo along the left-hand side, and “duMAURIER INTERNATIONAL / FEB. 27-28 / MARCH 1 / PHOTOG.” throughout the rest. The name tag was most likely for the 1968 Du Maurier International World Cup Event, a skiing competition held partially in British Columbia and partially in Quebec.
- Subject
- Eddie Hunter
- photography
- media
- skiing
- skiing competition
- Du Maurier International World Cup Event;
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 103.09.0389
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1965
- Material
- metal
- Catalogue Number
- 103.09.0167
- Description
- Small copper lapel pin . “ROY ANDERSEN PHOTOGRAPHY SKI PRO” us srenoed ariybd edge. In centre is relief of “Sunshine Sammy”, a furry figure with skis on and a camera around neck
1 image
- Title
- Lapel Pin
- Date
- 1965
- Material
- metal
- Dimensions
- 2.0 x 20. cm
- Description
- Small copper lapel pin . “ROY ANDERSEN PHOTOGRAPHY SKI PRO” us srenoed ariybd edge. In centre is relief of “Sunshine Sammy”, a furry figure with skis on and a camera around neck
- Subject
- ski
- Banff
- photography
- Roy Andersen
- Credit
- Gift of Roy Andersen, Banff, 2019
- Catalogue Number
- 103.09.0167
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1868
- Material
- metal
- Catalogue Number
- 104.41.1133 a-i
- Description
- Dallan metal developing tank (a) for six 5X7 inch plates, with removable lid (b) that attaches to the body of the tank with two metal fasteners. On the back face of the tank, near the center at the bottom, there is a rectangular box stamped into the metal with text inside that reads: “MADE IN GREAT…
1 image
- Title
- Developing Tank
- Date
- 1868
- Material
- metal
- Dimensions
- 20.5 x 8.0 x 13.5 cm
- Description
- Dallan metal developing tank (a) for six 5X7 inch plates, with removable lid (b) that attaches to the body of the tank with two metal fasteners. On the back face of the tank, near the center at the bottom, there is a rectangular box stamped into the metal with text inside that reads: “MADE IN GREAT BRITAIN”(?). On the top face of the lid, there is raised text which reads: “DALLAN DEVELOPING TANK”. Inside the developing tank, there is a removable tray (c) with six removable plate-holders(d-i).
- Subject
- Nicholas Morant
- darkroom
- photography
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1133 a-i
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1868
- Material
- metal
- Catalogue Number
- 104.41.1134 a-o
- Description
- Dallan metal developing tank (a) for twelve quarter-plates, with removable lid (b) that attaches to the body of the tank with two metal fasteners. On the back face of the tank, near the center at the bottom, there is a rectangular box stamped into the metal with text inside that reads: “MADE IN GRE…
1 image
- Title
- Developing Tank
- Date
- 1868
- Material
- metal
- Dimensions
- 14.5 x 10.0 x 18.0 cm
- Description
- Dallan metal developing tank (a) for twelve quarter-plates, with removable lid (b) that attaches to the body of the tank with two metal fasteners. On the back face of the tank, near the center at the bottom, there is a rectangular box stamped into the metal with text inside that reads: “MADE IN GREAT BRITAIN”. On the top face of the lid, there is raised text stamped into the metal which reads: “DALLAN DEVELOPING TANK”. The body of the tank contains a spout on the viewer-left face. Inside the developing tank, there is a removable tray (c) with twelve removable plate-holders(d-o).
- Subject
- Nicholas Morant
- darkroom
- photography
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1134 a-o
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1980
- Material
- plastic
- Catalogue Number
- 105.05.1041 a-c
- Description
- Grey plastic viewer with a round eyepiece and square lens with a slot for the slide. The viewer has a plastic storage box with a cream bottom and a red lid.(a) cream base(b) red lid with two price stickers on top. “OIT $4.50”(c) grey plastic viewer
1 image
- Title
- Slide Viewer
- Date
- 1960 – 1980
- Material
- plastic
- Description
- Grey plastic viewer with a round eyepiece and square lens with a slot for the slide. The viewer has a plastic storage box with a cream bottom and a red lid.(a) cream base(b) red lid with two price stickers on top. “OIT $4.50”(c) grey plastic viewer
- Subject
- photography
- Credit
- Purchased from Phyllis Cain, Banff, 1988
- Catalogue Number
- 105.05.1041 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1967 – 1990
- Material
- metal; plastic; fabric
- Catalogue Number
- 104.41.0097
- Description
- Dull grey travel case with shiny metal corner brackets, reinforcements along the edges, handle on the lid, and two lockable clasps. A black label underneath the handle on the lid reads “ASAHI PENTAX 6x7 TAKUMAR 1:4 f=600mm ASAHI OPT. CO. JAPAN.” Attached to the handle is a brown leather travel tag …
1 image
- Title
- Camera Case
- Date
- 1967 – 1990
- Material
- metal; plastic; fabric
- Dimensions
- 25.5 x 23.9 x 45.5 cm
- Description
- Dull grey travel case with shiny metal corner brackets, reinforcements along the edges, handle on the lid, and two lockable clasps. A black label underneath the handle on the lid reads “ASAHI PENTAX 6x7 TAKUMAR 1:4 f=600mm ASAHI OPT. CO. JAPAN.” Attached to the handle is a brown leather travel tag with a clear plastic window - visible through the window is a white card that reads “N Morant Special Photographer Public Relations and Advertising Canadian Pacific Banff, Alberta.”The interior of the case is lined with red velvet and consists of different-shaped supports throughout the main body and inside the lid. Case most likely used to house Pentax camera bodies and lenses.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0097
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1979
- Material
- paper; plastic
- Catalogue Number
- 104.41.0108
- Description
- 31 individual Moiré filters in wax paper envelopes with instruction manuals in a repurposed Ansco Photographic Paper box. Filters are in various patterns and shapes and are coloured either black, pink, yellow, or teal.Moiré filters were used in developing photographs to create textured blocks of co…
1 image
- Title
- Filters
- Date
- 1960 – 1979
- Material
- paper; plastic
- Dimensions
- 2.1 x 21.3 x 26.2 cm
- Description
- 31 individual Moiré filters in wax paper envelopes with instruction manuals in a repurposed Ansco Photographic Paper box. Filters are in various patterns and shapes and are coloured either black, pink, yellow, or teal.Moiré filters were used in developing photographs to create textured blocks of colour in order to enhance printed images, usually in advertisement. Moiré patterns are made by overlapping fine-line patterns (such as pinstripes) that are offset from each other at a slight angle - these patterns will appear and disappear depending on the resolution they appear in.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0108
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1980
- Material
- metal; plastic; paper; glass;
- Catalogue Number
- 104.41.0119 a-g
- Description
- Rectangular shiny silver metal box with a lift-off lid. Contents of the box include two glass vignettes with edges wrapped in pale brown binding tape [one has a small tab on one side], a yellow-tinted “KODAK SERIES VI ADAPTER RING” mounted in metal, a circular black plastic “CRAFTMEN’S GUILD PICTOR…
1 image
- Title
- Equipment Box
- Date
- 1960 – 1980
- Material
- metal; plastic; paper; glass;
- Dimensions
- 5.1 x 11.7 x 21.0 cm
- Description
- Rectangular shiny silver metal box with a lift-off lid. Contents of the box include two glass vignettes with edges wrapped in pale brown binding tape [one has a small tab on one side], a yellow-tinted “KODAK SERIES VI ADAPTER RING” mounted in metal, a circular black plastic “CRAFTMEN’S GUILD PICTORAL CONTROL” fixture with a clear central hole, a thin grey cardboard Kodak box with a strip of paper adhesive tape wrapped around the box holding the lid closed that has “2 1/4 x 3 1/4 Glasses for A - Assembly Enlarger” in blue ink [most likely written by Morant], a second thin Kodak cardboard box with a paper adhesive tape on the lid that has “MASKS for PRECISION A” written in black ink [probably by Morant] that contains wax paper envelopes of coloured celluloid masks, and a paper Canadian Pacific Railway envelope that contains wax paper envelopes of coloured celluloid masks.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0119 a-g
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1970
- Material
- plastic; metal;
- Catalogue Number
- 104.41.0121
- Description
- A black plastic double lens reflex Bedford Flex camera. The camera takes 4x4 exposures but due to its poor quality was not considered a real twin lens reflex camera by many professional photographers - it would be better suited for amateurs or as a toy. The camera has the pop-open top viewfinder, t…
1 image
- Title
- Toy Camera
- Date
- 1960 – 1970
- Material
- plastic; metal;
- Dimensions
- 11.0 x 7.5 x 7.5 cm
- Description
- A black plastic double lens reflex Bedford Flex camera. The camera takes 4x4 exposures but due to its poor quality was not considered a real twin lens reflex camera by many professional photographers - it would be better suited for amateurs or as a toy. The camera has the pop-open top viewfinder, two front-facing lenses with a black rubber lens cap, and a plastic carry strap attached to two metal brackets on either side of the camera.
- Subject
- Nicholas Morant
- photography
- camera
- toy camera
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0121
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1980
- Material
- cardboard; plastic; glass
- Catalogue Number
- 104.41.0123
- Description
- Square black plastic tool with a clear window in the top and a translucent window on an angle at the front - visible through the top window is an angled mirror, not accessible, so that light can move through the tool. Housed in a cardboard box with several scratched out things written on the lid - …
1 image
- Title
- Slide Preview
- Date
- 1960 – 1980
- Material
- cardboard; plastic; glass
- Dimensions
- 5.6 x 8.7 x 11.3 cm
- Description
- Square black plastic tool with a clear window in the top and a translucent window on an angle at the front - visible through the top window is an angled mirror, not accessible, so that light can move through the tool. Housed in a cardboard box with several scratched out things written on the lid - only “staples” is legible. The tool could be used to preview slides/negatives by placing them on the translucent window and placing the tool underneath a direct light source such as a lamp. Alternatively, the tool could be used as a precise light focus magnifier during photograph development/enlargement.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0123
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1962 – 1965
- Material
- leather; fabric; metal; glass; plastic;
- Catalogue Number
- 104.41.0138
- Description
- A Mamiya twin reflex lens with a plastic lens cap housed in a leather case lined with red velvet. The lens has a solid metal mount where it fits into a camera. Both lenses are 1:4.5 f=18cm.The case has a leather hinged lid, leather brackets on both short sides where a strap could be attached, and i…
1 image
- Title
- Camera Lens
- Date
- 1962 – 1965
- Material
- leather; fabric; metal; glass; plastic;
- Dimensions
- 11.0 x 8.5 x 13.5 cm
- Description
- A Mamiya twin reflex lens with a plastic lens cap housed in a leather case lined with red velvet. The lens has a solid metal mount where it fits into a camera. Both lenses are 1:4.5 f=18cm.The case has a leather hinged lid, leather brackets on both short sides where a strap could be attached, and is held closed with a snap on a leather tab.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0138
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1962 – 1969
- Material
- metal; plastic; glass; leather; plastic;
- Catalogue Number
- 104.41.0148 a,b
- Description
- A Mamiya C3 twinflex camera with extra lens. The camera is mostly metal with a pop-open top that exposes the viewfinder, multiple dials on the right-hand side, a crank on the left, and large black plastic knobs at the bottom near the front to extend or retract the lens plate. The back panel of the …
1 image
- Title
- Mamiya Camera
- Date
- 1962 – 1969
- Material
- metal; plastic; glass; leather; plastic;
- Dimensions
- 17.0 x 11.8 x 10.3 cm
- Description
- A Mamiya C3 twinflex camera with extra lens. The camera is mostly metal with a pop-open top that exposes the viewfinder, multiple dials on the right-hand side, a crank on the left, and large black plastic knobs at the bottom near the front to extend or retract the lens plate. The back panel of the camera pops open in order to reload the film [empty] and attached to both sides near the top are brackets where the leather carry strap is attached. On the top of the lid is a piece of masking tape with “VC” written in black ink.The spare lens is an alternate to the one on the camera and the only difference is the lens cap.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0148 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1969 – 1975
- Material
- metal; plastic; glass;
- Catalogue Number
- 104.41.0150
- Description
- An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
1 image
- Title
- Camera
- Date
- 1969 – 1975
- Material
- metal; plastic; glass;
- Dimensions
- 14.4 x 18.0 x 14.5 cm
- Description
- An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0150
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1980
- Material
- wood; plastic; metal; fabric; paper;
- Catalogue Number
- 104.41.0151 a-k
- Description
- Black hard-sided travel case with corner brackets and reinforcing along all edges - hinged lid held closed with three metal clasps. Below the clasps on the front of the case is a wooden handle, from which hangs a wooden travel tag with Nicholas Morant’s address printed in red ink. Throughout the ex…
1 image
- Title
- Equipment Case
- Date
- 1960 – 1980
- Material
- wood; plastic; metal; fabric; paper;
- Dimensions
- 28.6 x 57.2 x 38.5 cm
- Description
- Black hard-sided travel case with corner brackets and reinforcing along all edges - hinged lid held closed with three metal clasps. Below the clasps on the front of the case is a wooden handle, from which hangs a wooden travel tag with Nicholas Morant’s address printed in red ink. Throughout the exterior of the case are various travel stickers and labels, mostly faded and/or torn. The interior of the case is lined with patterned blue and white paper.Contents of the case include:B : two silver metal brackets most likely used to hold/mount a camera flash or light on a tripod - each housed in its own purple fabric bag with “Seagram’s” embroidered on them. Both brackets have small rectangular paper adhesives attached to them - one has “460” written in black ink and the other has “370” written in black ink. C : three metal clamps of various sizes - one housed in a red fabric bag.D : a tripod chain with three open hooks housed inside a metal Kodak developer can with a plastic lid - on the lid is a paper adhesive with “TRIPOD CHAIN” written in black ink.E : three power cords of various lengths - one has a paper adhesive tag that reads “GRAFLEX FLASH” in black ink.F : a flash handle and two alternative parts - all three are made from silver metal and have various plugs and black plastic pieces. G : coiled cables in a black and yellow cardboard box - on the lid is a paper adhesive label with “CABLES” written in black ink - “PHOTOEYE” is also written on the sides of the lid in black ink. H : coiled cables in a white and grey cardboard box - on side of the lid is a paper adhesive label with “TRIPPER” written in black in - “TRIPPER” is also written directly on the lid of the box in black.I : ballheads and screw boards in a beige cardboard box with two paper adhesive labels on the lid - one reads “BALLHEADS 1/4 SCREW BOARD” and the other has Nicholas Morant’s address.J : a handheld chalkboard sign with “MORANT” painted in yellow at the top - the remainder of the board is divided in two, the top section has “P” in the top left corner and the bottom section has “M” in the top left corner. K : handheld digital flash and accessories in a fitted Styrofoam box - taped to the outside of the lid is a “Braun 2000 VarioComputer” instruction manual in a plastic sleeve.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0151 a-k
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1969 – 1975
- Material
- metal; leather; plastic; fabric; paper; wood;
- Catalogue Number
- 104.41.0169 a-d
- Description
- Black hard-sided travel case with silver metal brackets on the corners and, two metal clasps holding the hinged lid closed, a central slide lock [unlocked], metal loop attachments on both short sides [possibly for a carry strap], and a leather handle attached to the lid with metal loops. The exteri…
1 image
- Title
- Camera Case
- Date
- 1969 – 1975
- Material
- metal; leather; plastic; fabric; paper; wood;
- Dimensions
- 25.2 x 19.7 x 33.5 cm
- Description
- Black hard-sided travel case with silver metal brackets on the corners and, two metal clasps holding the hinged lid closed, a central slide lock [unlocked], metal loop attachments on both short sides [possibly for a carry strap], and a leather handle attached to the lid with metal loops. The exterior of the case has the remnants of several different shipping labels [mostly on the front], a piece of masking tape along the right-hand side of the lid has “PENTAX 6x7” written in blue ink, and “FRAGILE” stenciled in white along the lid. The interior is lined in blue velvet - the body of the case is divided into two compartments and there are velvet-covered spacers in the larger compartment and in the lid to keep contents from shifting. Inside the case is a fabric camera strap still in its original plastic packaging, a wood and metal handle camera attachment in its original Asahi cardboard box [the box has several strips of masking tape throughout, none of which keep it closed], an Asahi Pentax lens hood in a black leather pouch, and a screw.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0169 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Polaroid Camera
https://archives.whyte.org/en/permalink/artifact104.41.0172
- Date
- 1965 – 1967
- Material
- plastic; metal; glass; fabric; paper;
- Catalogue Number
- 104.41.0172
- Description
- Polaroid Automatic 103 Land Camera in a grey plastic case and a black fabric carry strap attached to loops built in to the top of the camera. The cover folds down to expose the camera lens - this front cover can be detached and has a spring-controlled wire frame that holds the instruction manual in…
1 image
- Title
- Polaroid Camera
- Date
- 1965 – 1967
- Material
- plastic; metal; glass; fabric; paper;
- Dimensions
- 12.5 x 6.5 x 20.0 cm
- Description
- Polaroid Automatic 103 Land Camera in a grey plastic case and a black fabric carry strap attached to loops built in to the top of the camera. The cover folds down to expose the camera lens - this front cover can be detached and has a spring-controlled wire frame that holds the instruction manual in place. The camera itself folds out from the plastic casing - the viewfinder and focus calculator folds up on a hinge and clicks into place with a magnet; the lens extends out on fabric bellows and is released by pulling the lever numbered “1” up - the bellows can be retracted by pressing down on the crossbar; the back panel can open by sliding a small lever on the bottom.
- Subject
- Eddie Hunter
- photography
- camera
- Polaroid;
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 104.41.0172
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Polaroid Cameras
https://archives.whyte.org/en/permalink/artifact104.41.0174%20a%2cb
- Date
- 1960 – 1969
- Material
- metal; plastic; paper; leather;
- Catalogue Number
- 104.41.0174 a,b
- Description
- Two black and silver metal Graphic 4x5 Polaroid camera backs. Fit into the back of a standard 4x5 camera, they house the Polaroid film that is exposed by sliding an opaque screen open and closed again. Each Polaroid also has a leather handle on one end and fold completely open to expose the film co…
1 image
- Title
- Polaroid Cameras
- Date
- 1960 – 1969
- Material
- metal; plastic; paper; leather;
- Dimensions
- 11.9 x 6.5 x 28.0 cm
- Description
- Two black and silver metal Graphic 4x5 Polaroid camera backs. Fit into the back of a standard 4x5 camera, they house the Polaroid film that is exposed by sliding an opaque screen open and closed again. Each Polaroid also has a leather handle on one end and fold completely open to expose the film compartment inside - developed photographs are pulled through one side.
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 104.41.0174 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1986
- Material
- cardboard; metal; glass;
- Catalogue Number
- 104.41.0197
- Description
- Small round silver metal 5 cm camera lens attachment with small horizontal runners that slide into the base on the tops of most cameras. This lens is most likely a specifically-adjusted sight for a larger lens, based on the small size and the presence of a black rectangle printed on the glass of th…
1 image
- Title
- Lens
- Date
- 1960 – 1986
- Material
- cardboard; metal; glass;
- Dimensions
- 2.6 x 3.8 x 4.4 cm
- Description
- Small round silver metal 5 cm camera lens attachment with small horizontal runners that slide into the base on the tops of most cameras. This lens is most likely a specifically-adjusted sight for a larger lens, based on the small size and the presence of a black rectangle printed on the glass of the lens.The box consists of a white cardboard body with a partially torn housing inside for the lens that slides horizontally into a green cardboard sleeve. The green section has a narrow strip of adhesive tape around it, blocking most of the text on both the top and bottom - a small white rectangular price tag with “10.20” written on it in blue ink also obscures the text on the box.
- Credit
- Gift of Robert Crosby Family, Banff, 1998
- Catalogue Number
- 104.41.0197
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1965 – 1998
- Material
- metal; glass; plastic; fabric;
- Catalogue Number
- 104.41.0215
- Description
- Black metal Leitz Wetslar Tele-Elmar 1: 4 / 135 zoom lens with hood and two lens caps housed in a red fabric pouch that zips closed.
1 image
- Title
- Lens
- Date
- 1965 – 1998
- Material
- metal; glass; plastic; fabric;
- Dimensions
- 11.0 cm
- Description
- Black metal Leitz Wetslar Tele-Elmar 1: 4 / 135 zoom lens with hood and two lens caps housed in a red fabric pouch that zips closed.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.41.0215
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1980
- Material
- plastic; metal; paper
- Catalogue Number
- 104.41.0223
- Description
- A black plastic 35mm film loader with orange knobs and cranks. It is tear dropped shaped. On one side of the loader is an orange crank and on the other side is multiple parts. There is an orange knob that turns, an orange latch that twists back and forward to lock the bottom of the film loader in p…
1 image
- Title
- Loader Film
- Date
- prior to 1980
- Material
- plastic; metal; paper
- Dimensions
- 11.1 x 8.1 x 17.6 cm
- Description
- A black plastic 35mm film loader with orange knobs and cranks. It is tear dropped shaped. On one side of the loader is an orange crank and on the other side is multiple parts. There is an orange knob that turns, an orange latch that twists back and forward to lock the bottom of the film loader in place, an orange knob with numbers from 0 to 35 (in increments of 5), cut into the side is a window to a dial with white numbers on black text, there is a larger orange knob which twists that features orange text reads “OPEN ONLY TO REPLACE BULK FILM”, and and another black flat circle that twists with black text that reads “TO INSERT CASSETTE”, two solid triangles pointed up, and “TO LOAD FILM”. On the bottom of the where the film canister is loaded is a box with text inside, it reads “COMPUTROL 35 mm film loader RESTEM Ltd. T.A. Made in Israel”. There is an instruction manual with the film loader which features lots of text, sketches of the loader, and diagrams of use.
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0223
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.