Skip header and navigation

Narrow Results By

45 records – page 1 of 3.

Date
1988
Material
metal
Catalogue Number
103.09.1276
Description
blue, white and gold circular pin “UIAA 19 BANFF, CANADA 88” with white tag “from John Whyte Sept 1988”
  1 image  
Title
Commemorative Pin
Date
1988
Material
metal
Dimensions
2.0 x 2.0 cm
Description
blue, white and gold circular pin “UIAA 19 BANFF, CANADA 88” with white tag “from John Whyte Sept 1988”
Subject
UIAA
mountaineering
climbing
Jon
Whyte
Credit
Gift of Jon Whyte, Banff, 1988
Catalogue Number
103.09.1276
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1987
Material
metal; enamel; fibre; paper
Catalogue Number
103.09.1221 a-c
Description
One medal of order (a) (Order of Canada) and two lapel pins (b,c) (Order of Canada):(a) the medal of order is a six-pointed white enamel stylized snowflake design edged in silver. There is a silver maple leaf (signifying that it stands for Member of the Order of Canada) soldered onto the centre of …
  1 image  
Title
Medal
Date
1987
Material
metal; enamel; fibre; paper
Dimensions
3.75 x 9 cm
Description
One medal of order (a) (Order of Canada) and two lapel pins (b,c) (Order of Canada):(a) the medal of order is a six-pointed white enamel stylized snowflake design edged in silver. There is a silver maple leaf (signifying that it stands for Member of the Order of Canada) soldered onto the centre of the snowflake. The maple leaf is surrounded by a red enamel ring bearing the motto of the order “DESIDERANTES MELIOREM PATRIAM” (meaning “They desire a better country”) in silver lettering. The circle is topped by a crown (white, red, and turquoise) enamel simulating jewels edged in silver) of St. Edward, symbolizing that the order is headed by a sovereign. At the top of the snowflake badge there is a silver metal suspension ring. A grosgrain ribbon, white, bordered in red stripes similar to the Canadian flag, is passed through the ring and attached to a silver pin bar. The reverse side is plain silver except for the word “CANADA” and “1181” underneath, printed on the centre disc. Directly below on one of the snowflake points are some numbers and underneath that the word “RIDEAU”. On the top reverse side of the pin bar there is a horizontal hinged pin with a swivel-locking safety catch, underneath which “RIDEAU” is printed. The pin bar has an opening for the ribbon to pass through and two holes at the bottom where the ribbon is sewn to the pin bar with red thread.(a,b) The two small lapel pins (1cm high,1cm wide) are white enamel stylized snowflakes edged in silver with a silver maple leaf in the centre. On the back there is one small spike and one larger spike soldered onto the medal with a tie-tack style (spike and clutch closure attachment) pin closure. The medal and lapel pins are stored in a hinged black leatherette case lined in blue satin; the medal (a) rests in a depression, the lapel pins have no depressions for storage, the cover is lined in white satin, the letters “C.M.” in gold on outside lid.
Subject
Order of Canada
award
guiding
climbing
skiing
humanitarian
businessman
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
103.09.1221 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1982
Material
fibre
Catalogue Number
103.05.1092
Description
Blue, Mount Everest, red and navy design, ordinary blue cotton short sleeve t-shirt, red maple leaf 20.0 x 27.0 with climber holding up and ice axe superimposed on left side of maple leaf, on right side lettering in navy,1.0 tall reading :"Canadian Mt. Everest Expedition 1982".
  1 image  
Title
T-Shirt
Date
1982
Material
fibre
Dimensions
46.0 x 60.0 cm
Description
Blue, Mount Everest, red and navy design, ordinary blue cotton short sleeve t-shirt, red maple leaf 20.0 x 27.0 with climber holding up and ice axe superimposed on left side of maple leaf, on right side lettering in navy,1.0 tall reading :"Canadian Mt. Everest Expedition 1982".
Subject
events
Mount Everest
sports
climbing
Laurie Skreslet
Pat Morrow
Credit
Purchased from Rundle Memorial United Church, Banff, 1990
Catalogue Number
103.05.1092
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1967
Material
nylon; fibre
Catalogue Number
103.05.0406
Description
A pair of navy blue homemade wind pants, which features stretchy waistband and velcro cuffs on each leg,
  1 image  
Title
Wind Pants
Date
1967
Material
nylon; fibre
Dimensions
36.9 x 81.5 cm
Description
A pair of navy blue homemade wind pants, which features stretchy waistband and velcro cuffs on each leg,
Subject
ski
wind
winter
mountaineering
climbing
traverse
homemade
Don Gardner
Chic Scott
Credit
Gift of Charles (Chic) Scott, Cochrane, 2003
Catalogue Number
103.05.0406
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1963
Material
metal; enamel
Catalogue Number
103.09.1217
Description
A circular Alpine Club Mountain Guide pin with a forest-green, enamel maple leaf centred on the pin face, edged in silver and with the letters “ACMG” in silver. The outer rim of the pin is a coiled climbing rope encircling it three times; at the bottom is a red enamel curved bar edged in silver wit…
  1 image  
Title
Membership Pin
Date
1963
Material
metal; enamel
Dimensions
37/8 cm
Description
A circular Alpine Club Mountain Guide pin with a forest-green, enamel maple leaf centred on the pin face, edged in silver and with the letters “ACMG” in silver. The outer rim of the pin is a coiled climbing rope encircling it three times; at the bottom is a red enamel curved bar edged in silver with “MOUNTAIN” on top and “GUIDE” below in silver. The stylized cut-out maple leaf has a flat one-dimensional pair of skis crossed with an ice axe underneath. Both extend onto the coiled rope rim. Stamped on the back of the pin at the centre and under the pin set is the number “27” and something indecipherable beneath. There is one horizontal long-hinged pin soldered on the back that is rivetted at one end and fastens at the other end (bottom) with a swivel-locking safety clasp.
Subject
Alpine Club mountain Guide
sports
mountains
climbing
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
103.09.1217
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1961
Material
plastic
Catalogue Number
105.02.1134
Description
Clear plastic pill container with lid, almost completely taped with white adhesive tape.
Title
Summit Canister
Date
1961
Material
plastic
Dimensions
7.0 cm
Description
Clear plastic pill container with lid, almost completely taped with white adhesive tape.
Subject
sports
climbing
Mount Bryce
Credit
Gift of Bill Corbett, Calgary, 1992
Catalogue Number
105.02.1134
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960
Material
fibre; metal; plastic; elastic
Catalogue Number
103.08.1150 a,b
Description
(a) One pair beige-coloured goggles with yellow lenses, triangular metal frames with fabric edging; ribbon around the metal portion, stretch nylon gussets and velveteen on the portion against the wearer’s face. , the second set wider spaced, has twine threaded through to attach the frame to the foa…
  1 image  
Title
Ski Goggles
Date
1960
Material
fibre; metal; plastic; elastic
Dimensions
5.0 x 13.0 cm
Description
(a) One pair beige-coloured goggles with yellow lenses, triangular metal frames with fabric edging; ribbon around the metal portion, stretch nylon gussets and velveteen on the portion against the wearer’s face. , the second set wider spaced, has twine threaded through to attach the frame to the foam rubber cushion around the metal. The eyepieces are connected by a piece of elastic fabric across the nose and an adjustable elastic head strap that has lost most of its elasticity and is held together by metal clips.(b) A round aluminum storage container, 7.2cm high and 6.7cm radius, with a screw-on lid. On the bottom engraved “Switzerland”.
Subject
sports
winter
skiing
climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1989
Catalogue Number
103.08.1150 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960
Material
metal
Catalogue Number
108.04.1157
Description
A hand-forged, thin-blade piton for micro cracks called a ‘RURP’, an acronym for Realized Ultimate Reality Piton. The tapered blade is short and fine on the end; there are two holes on the wider, thicker end for rings. Engraved with “LONGWARE” and also “H G”.
  1 image  
Title
Climbing Piton
Date
1960
Material
metal
Dimensions
3.0 x 3.1 cm
Description
A hand-forged, thin-blade piton for micro cracks called a ‘RURP’, an acronym for Realized Ultimate Reality Piton. The tapered blade is short and fine on the end; there are two holes on the wider, thicker end for rings. Engraved with “LONGWARE” and also “H G”.
Subject
sports
climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
Catalogue Number
108.04.1157
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960
Material
metal
Catalogue Number
108.04.1159 a-d
Description
A carabiner with three pitons hanging from it:(a) an aluminum carabiner (10.5X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a met…
  1 image  
Title
Climbing Piton
Date
1960
Material
metal
Description
A carabiner with three pitons hanging from it:(a) an aluminum carabiner (10.5X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a metal piton (14.5x3.3cm wide) with the blade, instead of being flat, is positioned slightly sideways; engraved in script on the ‘handle’ portion “Charlet Moser” in block letters “CHAMONIX” . There is a white shop label glued on one side of the blade, in blue lettering “3 7 Premier Cycle & Sports 110 F”.(c) a trowel-shaped vertical piton (11.5x3.0cm), thin flat blade and high raised ‘handle’. This type of knife or blade was very popular in the Rockies. Commonly called the ‘Ace of Spades’. Raised “0” on the blade and “R. CASSIN” on viewer’s right and “ITALY” on the other. an “0” on the top part of the blade. Remnants of a piece of tape “1/74” indiscernable.(d) a hand-forged horizontal piton with a flat blade at one end and raised ‘handle’ at the other with a round hole to put a carabiner through. ‘LOST”, the diamond-shaped logo, “ARROW”.
Subject
sports
climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
Catalogue Number
108.04.1159 a-d
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960
Material
metal
Catalogue Number
108.04.1161 a-c
Description
A carabiner with two pitons attached:(a) a thick, soft iron D-ring carabiner (10.3x6.7cm wide) with a hinged gate, but no safety bar. Stencilled in “H G”, followed by engraved “CASSIN” surrounded by part oval logo.(b) a horizontal piton (16.5cmx4.0cm wide) made out of soft iron, with a flat blade a…
  1 image  
Title
Climbing Piton
Date
1960
Material
metal
Description
A carabiner with two pitons attached:(a) a thick, soft iron D-ring carabiner (10.3x6.7cm wide) with a hinged gate, but no safety bar. Stencilled in “H G”, followed by engraved “CASSIN” surrounded by part oval logo.(b) a horizontal piton (16.5cmx4.0cm wide) made out of soft iron, with a flat blade at one end and raised ‘handle’ at the other with a round hole to put a carabiner through. Engraved on the handle “AUSTRIA STUBAI”. A yellow sales label with black printing “BAROTTO CALGARY “$1.10 EA”. Hand printed in green ink “VERTICAL”.(c) a vertical piton (16.5x3.8cm wide) made out of soft iron, with flat blade and handle, engraved “MADE IN AUSTRIA STUBAI” remnants of a shop’s yellow sales label with black lettering “BAROTTO CALGAR” with the Y partially missing.
Subject
sports
climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
Catalogue Number
108.04.1161 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1980 – 1985
Material
metal; plastic; fibre
Catalogue Number
105.04.1013 a,b
Description
Motronic “Pieps 2” avalanche beacon or transceiver. Orange plastic with metal parts. Labeled on side with “Pieps 2. Motronic. Made in Austria.” and instructions for use. Yellow fabric case with black cord marked “Pieps 2. Motronic. Canada.”
  1 image  
Title
Avalanche Transceiver
Date
1980 – 1985
Material
metal; plastic; fibre
Dimensions
11.7 x 7.0 cm
Description
Motronic “Pieps 2” avalanche beacon or transceiver. Orange plastic with metal parts. Labeled on side with “Pieps 2. Motronic. Made in Austria.” and instructions for use. Yellow fabric case with black cord marked “Pieps 2. Motronic. Canada.”
Subject
sports
skiing
climbing
communication
rescue equipment
Credit
Gift of Douglas Leonard, Canmore, 1998
Catalogue Number
105.04.1013 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1965 – 1985
Material
metal; fibre
Catalogue Number
103.08.1118
Description
Kelty framepack, red nylon fabric pack with aluminum frame, padded shoulder straps and hip belt. Manufacturer’s label on top flap of pack: “KELTY Pack. SUN VALLEY, CALIF. 91352”
  1 image  
Title
Backpack
Date
1965 – 1985
Material
metal; fibre
Dimensions
74.0 x 38.0 cm
Description
Kelty framepack, red nylon fabric pack with aluminum frame, padded shoulder straps and hip belt. Manufacturer’s label on top flap of pack: “KELTY Pack. SUN VALLEY, CALIF. 91352”
Subject
sports
climbing
hiking
Arnold Wexler
Credit
Gift of Arnold Wexler (Estate), Allentown, United States, 1999
Catalogue Number
103.08.1118
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960 – 1980
Material
metal; fibre
Catalogue Number
108.04.1131
Description
7 various climbing chocks: 1 #9 hexcentric chock manufactured by Chouinard Equipment, slung with purple nylon rope; 1 smaller hexcentric chock, slung with purple and orange nylon perlon; 3 wedge chocks, various sizes, possibly custom machined, 1 slung with purple and orange nylon perlon and 2 slung…
  1 image  
Title
Climbing Chocks
Date
1960 – 1980
Material
metal; fibre
Description
7 various climbing chocks: 1 #9 hexcentric chock manufactured by Chouinard Equipment, slung with purple nylon rope; 1 smaller hexcentric chock, slung with purple and orange nylon perlon; 3 wedge chocks, various sizes, possibly custom machined, 1 slung with purple and orange nylon perlon and 2 slung with orange and purple nylon perlon; 2 wire copperheads (chocks) slung with metal cable and suaged with copper.
Subject
sports
climbing
Arnold Wexler
Credit
Gift of Arnold Wexler (Estate), Allentown, United States, 1999
Catalogue Number
108.04.1131
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960 – 1965
Material
metal
Catalogue Number
108.04.1132 a-c
Description
3 metal ice screws of varying sizes, all marked with purple tape. Manufacturer’s marks stamped: a) “SALEWA. D.B.P.”; b) “STUBAI MARWA. AUSTRIA”; c) “CASSIN. ITALY”.
  1 image  
Title
Ice Screw
Date
1960 – 1965
Material
metal
Dimensions
6.0 x 19.0 cm
Description
3 metal ice screws of varying sizes, all marked with purple tape. Manufacturer’s marks stamped: a) “SALEWA. D.B.P.”; b) “STUBAI MARWA. AUSTRIA”; c) “CASSIN. ITALY”.
Subject
sports
climbing
Maurice Legris
Credit
Gift of Maurice Legris, Edmonton, 2000
Catalogue Number
108.04.1132 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1980 – 1991
Material
metal; plastic
Catalogue Number
105.02.1136
Description
Black plastic cylinder with a screw top made from plummer’s pipe. The canister has a metal cable securely attached at the bottom and near the lid. The canister is marked “AL KANE.” The plastic pieces still have yellow price stickers attached.
  1 image  
Title
Summit Canister
Date
1980 – 1991
Material
metal; plastic
Description
Black plastic cylinder with a screw top made from plummer’s pipe. The canister has a metal cable securely attached at the bottom and near the lid. The canister is marked “AL KANE.” The plastic pieces still have yellow price stickers attached.
Subject
sports
climbing
mountaineering
Alpine Club of Canada
Alan Kane
Credit
Gift of Graeme Pole, Field, 1991
Catalogue Number
105.02.1136
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1965 – 1975
Material
metal; skin; wood
Catalogue Number
108.04.1061
Description
An ice axe, “Chouinard Frost” circa 1971, with a leather thong looped and tied through the head.
  1 image  
Title
Ice Ax
Date
1965 – 1975
Material
metal; skin; wood
Description
An ice axe, “Chouinard Frost” circa 1971, with a leather thong looped and tied through the head.
Subject
sports
climbing
Chic Scott
Credit
Gift of Charles (Chic) Scott, Cochrane, 1989
Catalogue Number
108.04.1061
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1980 – 1990
Material
fibre; metal
Catalogue Number
108.04.1116
Description
Assorted climbing gear including: rope, ice screws, chocks and various straps.
Title
Climbing Equipment
Date
1980 – 1990
Material
fibre; metal
Description
Assorted climbing gear including: rope, ice screws, chocks and various straps.
Subject
sports
climbing
hiking
Credit
Gift of Greg Yavorsky, Banff, 1992
Catalogue Number
108.04.1116
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1980
Material
metal; rubber; fibre
Catalogue Number
105.02.1046
Description
Summit register and container from Mount Louis. A narrow (5.0 diameter), long (20.0 high), metal cylinder, somewhat rusty,topped by a black, rubber cork (chewed), two link chains are attached to a metal ring on the cylinder's side, one runs to a similar ring on top of the rubber cork, the other han…
  1 image  
Title
Summit Canister
Date
prior to 1980
Material
metal; rubber; fibre
Dimensions
20.0 cm
Description
Summit register and container from Mount Louis. A narrow (5.0 diameter), long (20.0 high), metal cylinder, somewhat rusty,topped by a black, rubber cork (chewed), two link chains are attached to a metal ring on the cylinder's side, one runs to a similar ring on top of the rubber cork, the other hangs free with frayed and broken string on the loose end.
Subject
sports
climbing
Mount Louis
Credit
Gift of Parks Canada, Banff, 1980
Catalogue Number
105.02.1046
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960 – 1969
Material
metal
Catalogue Number
105.02.1098
Description
Very rusty tin can, Mount Stephen,typical tin can, rusted inside and out. Jaggedly cut opening (in can).
  1 image  
Title
Summit Canister
Date
1960 – 1969
Material
metal
Dimensions
11.6 cm
Description
Very rusty tin can, Mount Stephen,typical tin can, rusted inside and out. Jaggedly cut opening (in can).
Subject
sports
climbing
Mount Stephen
Credit
Gift of Graeme Pole, Field, 1987
Catalogue Number
105.02.1098
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1984 – 1986
Material
metal
Catalogue Number
105.02.1100
Description
Open-ended aluminum tube, Mount Sir Donald, 2 mm thick aluminum, roughly cut ends. Lightning damage ca 1.5 x 2, 5.0 from end.
  1 image  
Title
Summit Canister
Date
1984 – 1986
Material
metal
Dimensions
18.7 cm
Description
Open-ended aluminum tube, Mount Sir Donald, 2 mm thick aluminum, roughly cut ends. Lightning damage ca 1.5 x 2, 5.0 from end.
Subject
sports
climbing
Mount Sir Donald
Credit
Gift of Sharon Wood, Canmore, 1986
Catalogue Number
105.02.1100
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

45 records – page 1 of 3.

Back to Top