Narrow Results By
- Date
- 1965 – 1970
- Material
- skin; fibre
- Catalogue Number
- 103.08.0241
- Description
- A grey leather, commercially tanned, handmade purse, distinguished by a pocket in the front which contains two small papoose figures with hand painted faces. The purse has two parallel flaps which flop over the top and tie, and a very long pair of shoulder straps. Part of the sewing is cotton, part…
1 image
- Title
- Purse
- Date
- 1965 – 1970
- Material
- skin; fibre
- Dimensions
- 25.0 x 8.5 x 30.0 cm
- Description
- A grey leather, commercially tanned, handmade purse, distinguished by a pocket in the front which contains two small papoose figures with hand painted faces. The purse has two parallel flaps which flop over the top and tie, and a very long pair of shoulder straps. Part of the sewing is cotton, part of it is sinew. The bag contains a piece of sinew.
- Subject
- Indigenous
- figure
- papoose
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 103.08.0241
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1970
- Material
- plaster; wood
- Catalogue Number
- 107.01.0108
- Description
- Owl atop small log cross section, owl of plaster is painted dominantly beige and white with black. Yellow black eyes. Grease pencilled on log bottom "EL".
1 image
- Title
- Bird Figurine
- Date
- 1960 – 1970
- Material
- plaster; wood
- Dimensions
- 14.5 x 6.4 x 9.3 cm
- Description
- Owl atop small log cross section, owl of plaster is painted dominantly beige and white with black. Yellow black eyes. Grease pencilled on log bottom "EL".
- Subject
- households
- decorative
- miniatures
- craft
- carving
- animal
- bird
- owl
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 107.01.0108
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1963
- Material
- wood; rubber
- Catalogue Number
- 107.01.0114
- Description
- Mass produced stylized bird constructed of various natural coloured spheres of wood, joined with dowels. Head has black rubber inset eyes and head swivels 360 degrees. Chip on left foot. Feet form base.
1 image
- Title
- Bird Figurine
- Date
- 1960 – 1963
- Material
- wood; rubber
- Dimensions
- 8.5 x 5.0 x 6.5 cm
- Description
- Mass produced stylized bird constructed of various natural coloured spheres of wood, joined with dowels. Head has black rubber inset eyes and head swivels 360 degrees. Chip on left foot. Feet form base.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 107.01.0114
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1970
- Material
- wood
- Catalogue Number
- 107.01.0121
- Description
- Simple duck like bird which has been scorched and sand blasted to reveal grain marks in wood. Stamped "Gerd Canada" on bottom. Grain of wood defines eyes and wing of bird.
1 image
- Title
- Bird Figurine
- Date
- 1960 – 1970
- Material
- wood
- Dimensions
- 8.0 x 3.6 x 11.5 cm
- Description
- Simple duck like bird which has been scorched and sand blasted to reveal grain marks in wood. Stamped "Gerd Canada" on bottom. Grain of wood defines eyes and wing of bird.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 107.01.0121
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1965 – 1970
- Material
- glass
- Catalogue Number
- 107.01.0123
- Description
- Deep green glass penguin of elegant, simple design. Head raised and flippers extended out. Chip from left flipper tip. Label on bottom "Hand Made by Altaglass, Medicine Hat, Alta." and "Walsall England" (poss. represents label manufacturer).
1 image
- Title
- Bird Figurine
- Date
- 1965 – 1970
- Material
- glass
- Dimensions
- 18.2 x 9.0 x 10.0 cm
- Description
- Deep green glass penguin of elegant, simple design. Head raised and flippers extended out. Chip from left flipper tip. Label on bottom "Hand Made by Altaglass, Medicine Hat, Alta." and "Walsall England" (poss. represents label manufacturer).
- Subject
- households
- decorative
- miniatures
- animal
- bird
- penguin
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 107.01.0123
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1967 – 1967
- Material
- wood
- Catalogue Number
- 107.02.0001
- Description
- A carved wooden owl sitting on a very rough half-round section of log. The owl is painted dark brown with feather texture on wings, an orange face and breast. The owl has glass eyes. The side of the base is marked with a maker’s mark, “HAL” with letters joined together, and “Bieler 67” in red.
1 image
- Title
- Bird Figurine
- Date
- 1967 – 1967
- Material
- wood
- Dimensions
- 10.4; 5.0 (base) x 4.3; 10.0 (base) x 4.8; 9.0 (base) cm
- Description
- A carved wooden owl sitting on a very rough half-round section of log. The owl is painted dark brown with feather texture on wings, an orange face and breast. The owl has glass eyes. The side of the base is marked with a maker’s mark, “HAL” with letters joined together, and “Bieler 67” in red.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 107.02.0001
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1970
- Material
- metal
- Catalogue Number
- 108.04.1047 a-d
- Description
- Various shaped blades (a) 8.2x2.7x2.8, blade off to the side (b) 7.8x4.0x1.8, blade centered, tip turned down, "3" stamped on blade (c) 8.3x3.7x2.3, blade centered, "50"stamped on blade (d) 9.0x4.0x1.2, blade centered. "8" stamped on blade.
1 image
- Title
- Climbing Piton
- Date
- 1960 – 1970
- Material
- metal
- Description
- Various shaped blades (a) 8.2x2.7x2.8, blade off to the side (b) 7.8x4.0x1.8, blade centered, tip turned down, "3" stamped on blade (c) 8.3x3.7x2.3, blade centered, "50"stamped on blade (d) 9.0x4.0x1.2, blade centered. "8" stamped on blade.
- Subject
- sports
- climbing
- Chic Scott
- Credit
- Gift of Charles (Chic) Scott, Cochrane, 1987
- Catalogue Number
- 108.04.1047 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Climbing Piton
https://archives.whyte.org/en/permalink/artifact108.04.1157
- Date
- 1960
- Material
- metal
- Catalogue Number
- 108.04.1157
- Description
- A hand-forged, thin-blade piton for micro cracks called a ‘RURP’, an acronym for Realized Ultimate Reality Piton. The tapered blade is short and fine on the end; there are two holes on the wider, thicker end for rings. Engraved with “LONGWARE” and also “H G”.
1 image
- Title
- Climbing Piton
- Date
- 1960
- Material
- metal
- Dimensions
- 3.0 x 3.1 cm
- Description
- A hand-forged, thin-blade piton for micro cracks called a ‘RURP’, an acronym for Realized Ultimate Reality Piton. The tapered blade is short and fine on the end; there are two holes on the wider, thicker end for rings. Engraved with “LONGWARE” and also “H G”.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1157
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960
- Material
- metal
- Catalogue Number
- 108.04.1159 a-d
- Description
- A carabiner with three pitons hanging from it:(a) an aluminum carabiner (10.5X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a met…
1 image
- Title
- Climbing Piton
- Date
- 1960
- Material
- metal
- Description
- A carabiner with three pitons hanging from it:(a) an aluminum carabiner (10.5X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a metal piton (14.5x3.3cm wide) with the blade, instead of being flat, is positioned slightly sideways; engraved in script on the ‘handle’ portion “Charlet Moser” in block letters “CHAMONIX” . There is a white shop label glued on one side of the blade, in blue lettering “3 7 Premier Cycle & Sports 110 F”.(c) a trowel-shaped vertical piton (11.5x3.0cm), thin flat blade and high raised ‘handle’. This type of knife or blade was very popular in the Rockies. Commonly called the ‘Ace of Spades’. Raised “0” on the blade and “R. CASSIN” on viewer’s right and “ITALY” on the other. an “0” on the top part of the blade. Remnants of a piece of tape “1/74” indiscernable.(d) a hand-forged horizontal piton with a flat blade at one end and raised ‘handle’ at the other with a round hole to put a carabiner through. ‘LOST”, the diamond-shaped logo, “ARROW”.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1159 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960
- Material
- metal
- Catalogue Number
- 108.04.1161 a-c
- Description
- A carabiner with two pitons attached:(a) a thick, soft iron D-ring carabiner (10.3x6.7cm wide) with a hinged gate, but no safety bar. Stencilled in “H G”, followed by engraved “CASSIN” surrounded by part oval logo.(b) a horizontal piton (16.5cmx4.0cm wide) made out of soft iron, with a flat blade a…
1 image
- Title
- Climbing Piton
- Date
- 1960
- Material
- metal
- Description
- A carabiner with two pitons attached:(a) a thick, soft iron D-ring carabiner (10.3x6.7cm wide) with a hinged gate, but no safety bar. Stencilled in “H G”, followed by engraved “CASSIN” surrounded by part oval logo.(b) a horizontal piton (16.5cmx4.0cm wide) made out of soft iron, with a flat blade at one end and raised ‘handle’ at the other with a round hole to put a carabiner through. Engraved on the handle “AUSTRIA STUBAI”. A yellow sales label with black printing “BAROTTO CALGARY “$1.10 EA”. Hand printed in green ink “VERTICAL”.(c) a vertical piton (16.5x3.8cm wide) made out of soft iron, with flat blade and handle, engraved “MADE IN AUSTRIA STUBAI” remnants of a shop’s yellow sales label with black lettering “BAROTTO CALGAR” with the Y partially missing.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1161 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.