Narrow Results By
Needle Bayonet
https://archives.whyte.org/en/permalink/artifact104.05.0052
- Date
- 1870 – 1875
- Material
- metal
- Catalogue Number
- 104.05.0052
- Description
- Long narrow bayonet with four edges, cross-section shape of cross, tapering to point. Base of bayonet formed into elbow which is joined to metal tube to fit over barrel of rifle. Spiral slit in tube fits over sight on rifle and twists to secure bayonet in place, metal clamp on tube to tighten.
1 image
- Title
- Needle Bayonet
- Date
- 1870 – 1875
- Material
- metal
- Dimensions
- 6.4 x 2.7 x 56.0 cm
- Description
- Long narrow bayonet with four edges, cross-section shape of cross, tapering to point. Base of bayonet formed into elbow which is joined to metal tube to fit over barrel of rifle. Spiral slit in tube fits over sight on rifle and twists to secure bayonet in place, metal clamp on tube to tighten.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0052
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Scabbard Bayonet
https://archives.whyte.org/en/permalink/artifact104.05.0053%20a-d
- Date
- 1871 – 1872
- Material
- metal
- Catalogue Number
- 104.05.0053 a-d
- Description
- A pair of long bayonets with ridged brass handles and steel scabbards. (a,b) bayonets, long narrow steel blade with slight reverse curve, set into solid brass handle with ridges around the handgrip. Deep wide groove along length either side of blade. Sword guard like crossbar of a 'T' of steel curl…
1 image
- Title
- Scabbard Bayonet
- Date
- 1871 – 1872
- Material
- metal
- Dimensions
- 10.2 x 2.3 x 69.7 cm
- Description
- A pair of long bayonets with ridged brass handles and steel scabbards. (a,b) bayonets, long narrow steel blade with slight reverse curve, set into solid brass handle with ridges around the handgrip. Deep wide groove along length either side of blade. Sword guard like crossbar of a 'T' of steel curling down on under side, with circular hole on upper side to accommodate barrel of rifle. Slot on upper side of handle along length to slide barrel in and support bayonet. Marks: (a) engraved atop blade, "Culle Fevrier 1872", serial no., "T60071" (b) engraved atop blade, "Lt. Etienne Juin 1871", serial no., "L78693". Scabbards, steel, formed to fit the shape of the blades, with round knob at tip and small square loop of steel for belt soldered near mouth of each. Marks: near mouth opposite loop, serial no. "X77249", near mouth opposite loop, serial no. "S5181", and "*" and "F".
- Subject
- Norman Sanson
- Riel Rebellion
- warfare
- fighting
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0053 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
And Scabbard Dirk
https://archives.whyte.org/en/permalink/artifact104.05.0057%20a%2cb
- Date
- 1875 – 1930
- Material
- metal; wood; fibre
- Catalogue Number
- 104.05.0057 a,b
- Description
- A very thin knife with ebony handle like rifle butt and wooden scabbard wrapped with bands of black cord. (a) dirk, short, narrow, pointed steel blade with reverse curve to sharp shoulder on under side of hilt. Small carved ebony handle shaped like a rifle butt, with carved band of scallops and d…
1 image
- Title
- And Scabbard Dirk
- Date
- 1875 – 1930
- Material
- metal; wood; fibre
- Dimensions
- 2.1 x 1.0 x 15.0 cm
- Description
- A very thin knife with ebony handle like rifle butt and wooden scabbard wrapped with bands of black cord. (a) dirk, short, narrow, pointed steel blade with reverse curve to sharp shoulder on under side of hilt. Small carved ebony handle shaped like a rifle butt, with carved band of scallops and diamond shapes around middle. Two decorative notches carved across butt of handle. Note: handle checked along length. (b) scabbard, small, simple and straight, carved of two pieces of wood with triangular opening at mouth. Top carved to curve downward on one side to accommodate shoulder of blade. Girded with four double bands of finely braided cord, evenly spaced along length, and a fifth triple band at top beneath shoulder. Note: top fibre hands loose and slide up and down.
- Subject
- warfare
- fighting
- Japanese
- Edward S. Morse
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.05.0057 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1780 – 1850
- Material
- metal; wood
- Catalogue Number
- 104.06.1004
- Description
- Triangular iron blade, wooden pipe shaped handle, blade 14.2 long flares from 1.3 cm wide to 4.8 cm wide, 5 horizontal lines are etched extending around top of blade, edge of blade is chipped, wooden handle 32.5 long has an "H" etched into the wood 10.6 cm from bottom, 4 wires wind around the handl…
1 image
- Title
- Tomahawk Ax
- Date
- 1780 – 1850
- Material
- metal; wood
- Dimensions
- 2.6 x 20.5 x 32.5 cm
- Description
- Triangular iron blade, wooden pipe shaped handle, blade 14.2 long flares from 1.3 cm wide to 4.8 cm wide, 5 horizontal lines are etched extending around top of blade, edge of blade is chipped, wooden handle 32.5 long has an "H" etched into the wood 10.6 cm from bottom, 4 wires wind around the handle 7.5 cm form top, handle has a black top and bottom, top curves to form a pipe shaped handle, blade seems to be inserted directly through top part of the handle
- Subject
- Indigenous
- warfare
- Credit
- Gift of Don Maskel, 1967
- Catalogue Number
- 104.06.1004
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Bludgeon Hammerhead
https://archives.whyte.org/en/permalink/artifact104.06.1012
- Date
- prior to 1800
- Material
- mineral
- Catalogue Number
- 104.06.1012
- Description
- An oval shaped rock with an indentation around middle to secure a band.
1 image
- Title
- Bludgeon Hammerhead
- Date
- prior to 1800
- Material
- mineral
- Dimensions
- 11.1 cm
- Description
- An oval shaped rock with an indentation around middle to secure a band.
- Subject
- Indigenous
- warfare
- Credit
- Gift of Joe A. Brewster, Banff, 1980
- Catalogue Number
- 104.06.1012
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1800
- Material
- mineral
- Catalogue Number
- 104.06.1009
- Description
- a large stone with an indentation around it to attach thong.
1 image
- Title
- Clubhead
- Date
- prior to 1800
- Material
- mineral
- Dimensions
- 10.5 x 15.0 cm
- Description
- a large stone with an indentation around it to attach thong.
- Subject
- Indigenous
- warfare
- Credit
- Gift of Unknown, 1968
- Catalogue Number
- 104.06.1009
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.