Narrow Results By
- 1920s 936
- 1950s 932
- 1900s 868
- 1930s 858
- 1940s 598
- 1910s 565
- 1870s 474
- 1960s 473
- 1890s 363
- 1970s 327
- 1880s 226
- 1980s 145
- 1850s 126
- 1800s
- 1990s
- 1860s
- 1820s 28
- 1830s 15
- 1840s 14
- 1750s 10
- 1780s 9
- 2000s 9
- 1810s 8
- 1790s 7
- 2010s 7
- 1700s 5
- 2020s 4
- 1600s 2
- 1770s 2
- 1080s 1
- 1300s 1
- 1500s 1
- 1530s 1
- 1550s 1
- 1620s 1
- 1690s 1
- 1720s 1
- 1760s 1
- Date
- 1800 – 1880
- Material
- fibre
- Catalogue Number
- 103.05.1101
- Description
- Embroidered black silk, gathered at the top onto band, folded under, made of three panels of silk, centre panel 42.0 wideand side panels 20.0 with 6.0 of that turned to back, embroidery done with single thread in shades of green, brown and pale yellow, blue and melon, flowers and leaves in two pan…
1 image
- Title
- Apron
- Date
- 1800 – 1880
- Material
- fibre
- Dimensions
- 65.0 x 74.0 cm
- Description
- Embroidered black silk, gathered at the top onto band, folded under, made of three panels of silk, centre panel 42.0 wideand side panels 20.0 with 6.0 of that turned to back, embroidery done with single thread in shades of green, brown and pale yellow, blue and melon, flowers and leaves in two panels downand wider panel across
- Credit
- Gift of Charles C. Reid, Banff, Alberta, 1986
- Catalogue Number
- 103.05.1101
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1999
- Material
- skin, deer; glass; fibre;
- Catalogue Number
- 103.05.1186
- Description
- An untanned, buckskin jacket with floral beadwork design on the back across the shoulders in flowers with colours red, blue, black, yellow and leaves of green. The area below the beadwork is pinked and fringed. There is mirror image, identical beadwork on each side of the front of the jacket. There…
1 image
- Title
- Beaded Jacket
- Date
- 1999
- Material
- skin, deer; glass; fibre;
- Dimensions
- 50.0; with arms 167.5 x 88.5 cm
- Description
- An untanned, buckskin jacket with floral beadwork design on the back across the shoulders in flowers with colours red, blue, black, yellow and leaves of green. The area below the beadwork is pinked and fringed. There is mirror image, identical beadwork on each side of the front of the jacket. There is a zippered front closure and a pinked and beaded portion on each side of the zipper. The beadwork is alternating blue, yellow and red flowers with blue and yellow leaves and stems and then below flowers with colours of red, blue, black, yellow and leaves in green. There are four flowers on each side. On the flat front pockets the borders are pinked and the beadwork is a flower with red petals rimmed with black and a yellow centre. The leaves and stem are green.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 103.05.1186
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Beaded Moccasins
https://archives.whyte.org/en/permalink/artifact103.03.1128%20a%2cb
- Date
- 1999
- Material
- skin, animal
- Catalogue Number
- 103.03.1128 a,b
- Description
- A pair of men’s cured hide, high-top moccasins, plain, no beadwork; they have pinked tongues and uppers, and long ties threaded through high-tops and tongue where it meets the vamps.
1 image
- Title
- Beaded Moccasins
- Date
- 1999
- Material
- skin, animal
- Dimensions
- 22.0 x 13.5 x 29.5 sole cm
- Description
- A pair of men’s cured hide, high-top moccasins, plain, no beadwork; they have pinked tongues and uppers, and long ties threaded through high-tops and tongue where it meets the vamps.
- Subject
- footwear
- Indigenous
- Andy Russell
- regalia
- Credit
- Gift of Andy Russell, Waterton Park, 1999
- Catalogue Number
- 103.03.1128 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Beaded Necklace
https://archives.whyte.org/en/permalink/artifact103.01.0074
- Date
- 1860 – 1875
- Material
- skin; glass
- Catalogue Number
- 103.01.0074
- Description
- An eight strand coil beaded loop necklace, white beads wound around leather strands, with brass and wooden beads at the nadir of each strand. Two pieces of harness leather at each end with the strand leathers brought through them to form fringe, and hanging ties at the top of each piece of harness …
1 image
- Title
- Beaded Necklace
- Date
- 1860 – 1875
- Material
- skin; glass
- Dimensions
- 47.0 cm
- Description
- An eight strand coil beaded loop necklace, white beads wound around leather strands, with brass and wooden beads at the nadir of each strand. Two pieces of harness leather at each end with the strand leathers brought through them to form fringe, and hanging ties at the top of each piece of harness leather. Ties would tie immediately behind neck. A brass necklace with pony beads in a traditional men’s design. During Treaty times the Stoney were enamoured with brass and would barter for it for decorative purposes.*custom made plexi glass display in bottom of box
- Subject
- Indigenous
- beadwork
- accessories
- regalia
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 103.01.0074
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1997
- Material
- glass; paper
- Catalogue Number
- 110.01.1046 a-i
- Description
- Six bottles of beer (empty) with case, signed poster and card. Typical beer bottle with screw off cap. Label affixed to one side has a red border with "Brewed Naturally in the Canadian Rockies" on top and "6% alc./vol. 341 mL" on bottom edge. The scene has mountains in the background with a clim…
- Title
- Beer Bottle
- Date
- 1997
- Material
- glass; paper
- Dimensions
- 23.0 cm
- Description
- Six bottles of beer (empty) with case, signed poster and card. Typical beer bottle with screw off cap. Label affixed to one side has a red border with "Brewed Naturally in the Canadian Rockies" on top and "6% alc./vol. 341 mL" on bottom edge. The scene has mountains in the background with a climber, Bruno Engler, highlighted in the centre, with "Bruno's Mountain Bock " in red. Also on the label is "The Bow Valley Brewing Company Canmore Alberta Strong Beer Biere Forte". The paper case is light brown in colour with the same picture as the label on four sides with stories about Bruno and the beer on the top, other promotion on sides. Poster 91.5x56.0 has a black border with white lettering. "Canmore's Legendary Brew" is in large black letters at top of poster, yellowish background is a mountain scene with a black and white image of the beer bottle centered. Signed "Bruno Engler" on left edge. Small card promoting the book "A Mountain Life Stories and photographs of Bruno Engler edited by R. W. Sandford".
- Credit
- Gift of Bow Valley Brewing Co., Canmore, 1997
- Catalogue Number
- 110.01.1046 a-i
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1860 – 1910
- Material
- fibre
- Catalogue Number
- 103.03.1039 a,b
- Description
- Pair of white baby bootees, ankle high, fancy knit at top. Red pattern over foot and knitted band at ankle with thin satin ribbon laced through.
1 image
- Title
- Bootees
- Date
- 1860 – 1910
- Material
- fibre
- Description
- Pair of white baby bootees, ankle high, fancy knit at top. Red pattern over foot and knitted band at ankle with thin satin ribbon laced through.
- Subject
- households
- clothing
- children
- Mary Schaffer
- Credit
- Gift of Charles C. Reid, Banff, Alberta, 1986
- Catalogue Number
- 103.03.1039 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- ivory
- Catalogue Number
- 110.02.0016
- Description
- A small round ivory box constructed of three ivory rings so perfectly carved as to stack together easily to form a single unit; lid with large tear-shaped ivory knob sits inside top ring; two round-headed ivory pins pass through holes in the lip with the shanks protruding to the angles forming base…
1 image
- Title
- Box
- Date
- 1800 – 1900
- Material
- ivory
- Dimensions
- 7.0 x 6.2 cm
- Description
- A small round ivory box constructed of three ivory rings so perfectly carved as to stack together easily to form a single unit; lid with large tear-shaped ivory knob sits inside top ring; two round-headed ivory pins pass through holes in the lip with the shanks protruding to the angles forming base and lip.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 110.02.0016
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Box Grand Piano
https://archives.whyte.org/en/permalink/artifact104.34.1002
- Date
- 1860 – 1865
- Material
- wood; ivory; metal
- Catalogue Number
- 104.34.1002
- Description
- A box grand piano with ornately carved spiral legs. A hinged lid covers the keyboard and the upright box holds the hammers and wires. “Henry F. Miller Boston” is written in gold lettering on the folding lid. There is carved lattice piece that screws on to hold sheet music. The serial number “13270”…
1 image
- Title
- Box Grand Piano
- Date
- 1860 – 1865
- Material
- wood; ivory; metal
- Dimensions
- 98. x 195. cm
- Description
- A box grand piano with ornately carved spiral legs. A hinged lid covers the keyboard and the upright box holds the hammers and wires. “Henry F. Miller Boston” is written in gold lettering on the folding lid. There is carved lattice piece that screws on to hold sheet music. The serial number “13270” is printed in black on the inside. The pedals fold for storage underneath the piano body.
- Credit
- Gift of Iva (Mrs. Len) Smith, 1970
- Catalogue Number
- 104.34.1002
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1860 – 1890
- Material
- wood
- Catalogue Number
- 108.05.0059
- Description
- Small square wooden box with inlaid top. Box contains another box within concealed by separate removable side panels on all four sides. Inlay pattern is a series of horizontal strips of dark, light and black woods. The horizontals are interrupted by two rectangles. Upper triangle, 6.4 x 2.5 cm.…
1 image
- Title
- Box Puzzle
- Date
- 1860 – 1890
- Material
- wood
- Dimensions
- 4.7 x 7.5 x 7.5 cm
- Description
- Small square wooden box with inlaid top. Box contains another box within concealed by separate removable side panels on all four sides. Inlay pattern is a series of horizontal strips of dark, light and black woods. The horizontals are interrupted by two rectangles. Upper triangle, 6.4 x 2.5 cm. is inlaid with thin strips of black set diagonally in both directions. The lower triangle, 3.5 x 3.0 cm, is inlaid with twelve light and black wood triangles. A narrow vertical rectangle, 3.2 x .9 cm. of light wood interrupted by thin horizontal strips of black is set to the left of the lower triangle. The four corner support posts are attached to base by small wooden pegs which are visible on bottom.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 108.05.0059
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Bric-A-Brac Stand Collection
https://archives.whyte.org/en/permalink/artifact102.04.0319%20a-f
- Date
- 1800 – 1890
- Material
- wood
- Catalogue Number
- 102.04.0319 a-f
- Description
- A collection of six short dark brown wooden stands. (a) 2.3 x 9.8 - incised double circle in circular platform top and carved knob trim around its rim. Outward bowed base is elaborately carved through in interwoven knot design between three square spiral motifs, each of which terminates in a small …
1 image
- Title
- Bric-A-Brac Stand Collection
- Date
- 1800 – 1890
- Material
- wood
- Dimensions
- 2.3 cm
- Description
- A collection of six short dark brown wooden stands. (a) 2.3 x 9.8 - incised double circle in circular platform top and carved knob trim around its rim. Outward bowed base is elaborately carved through in interwoven knot design between three square spiral motifs, each of which terminates in a small foot. Underside has circle carved at centre. (b) 2.6 x 5.8 - small lip around top platform, outward bowed base carved through in scrolled vine pattern between solid spaces terminating in three small feet. Marks: on base, red Japeanese writing) (c) 2.6 x 6.7 - double circle inscribed on top platform which is ringed with small lip, smooth outward bowed base with three small feet curving outward, small circle cut in base. Marks: on base, paper label, “605/2” (d) 2.7 x 6.5 - lathe turned with small lip around top platform, smooth outward bowed base with small foot-ring, bottom hollowed inside foot-ring. (e) 1.6 x 5.7 - small raised ring carved around platform top, base flares out slightly and is scroll-shaped along bottom defining three very small feet. (f) 1.6 x 4.5 - small lip around platform top, sharp shoulder of outward bowed based incised with small lines around; scroll carving at bottom defines small feet.
- Subject
- households
- decorative
- Japanese
- E. S. Morse;
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.04.0319 a-f
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Bronze Sculpture
https://archives.whyte.org/en/permalink/artifact107.02.1037
- Date
- 1998 – 2001
- Material
- metal, bronze; wood
- Catalogue Number
- 107.02.1037
- Description
- Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
1 image
- Title
- Bronze Sculpture
- Date
- 1998 – 2001
- Material
- metal, bronze; wood
- Dimensions
- 24.5 x 9.0 x 17.5 cm
- Description
- Commemorative bronze sculpture of man on horse by Malcolm MacKenzie on wooden base. Signed by artist and numbered #26 of 49. Plaque on front reads: “T.R.C.R. 75 years, 1923-1998”.
- Credit
- Gift of Trail Riders of the Canadian Rockies, Calgary, 2002
- Catalogue Number
- 107.02.1037
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1860 – 1900
- Material
- metal
- Catalogue Number
- 104.20.0093
- Description
- A metal butter dish with a high domed lid that has a large flower engraved boldly on one side. The rim of the dish is flattened and has an ornate triangular shaped handle at one side and two metal slots sticking out from the other (probably to hold knife). The dish has four triangular legs, in th…
- Title
- Butter Dish
- Date
- 1860 – 1900
- Material
- metal
- Dimensions
- 16.0 cm
- Description
- A metal butter dish with a high domed lid that has a large flower engraved boldly on one side. The rim of the dish is flattened and has an ornate triangular shaped handle at one side and two metal slots sticking out from the other (probably to hold knife). The dish has four triangular legs, in the same design as the handle, that support the dish. The base is decorated with a drawing of a tepee and has the initials “I.B.”. The dish is also marked with “Standard Silver Co. Ltd. Toronto Quadruple Plate 257 Hard White Metal”.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.20.0093
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- metal
- Catalogue Number
- 104.20.0661
- Description
- Small, plain, circular plate with wide rim and fairly deep dish area. Stamps on rim include Heraldic rampant lion and "H" "X" "B" separately stamped. Plate base stamped with crest including crown and laurels.
1 image
- Title
- Butter Plate
- Date
- 1800 – 1900
- Material
- metal
- Dimensions
- 1.8 x 18.7 cm
- Description
- Small, plain, circular plate with wide rim and fairly deep dish area. Stamps on rim include Heraldic rampant lion and "H" "X" "B" separately stamped. Plate base stamped with crest including crown and laurels.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.20.0661
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1900
- Material
- wood, mahogany; glass; fibre
- Catalogue Number
- 102.03.0029
- Description
- A cabinet with two parts; an upper cabinet that is attached to a lower bureau. The upper cabinet has two glass-front doors and three shelves. The lower bureau has three drawers and a fold-out leaf that can serve as a desk.
1 image
- Title
- Cabinet
- Date
- 1800 – 1900
- Material
- wood, mahogany; glass; fibre
- Dimensions
- 174.0 x 47.5 x 101.5 cm
- Description
- A cabinet with two parts; an upper cabinet that is attached to a lower bureau. The upper cabinet has two glass-front doors and three shelves. The lower bureau has three drawers and a fold-out leaf that can serve as a desk.
- Subject
- households
- furniture
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 102.03.0029
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Catalogue Number
- 104.41.0081 a-d
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded suppor…
1 image
- Title
- Camera Tripod
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Dimensions
- 28.3 x 28.6 x 138.5 cm
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded supports and buckled leather straps located inside to keep the tripod in place - straps not done up at time of processing. NICHOLAS MORANT written in white along the narrow top edge on either side of carrying handle, TR1 written in yellow paint in the top left end of narrow edge and in top right corner of opening side, the torn remains on a Canadian Pacific Railway label remains on the side that does not open. Tripod: Manufacturer mark on metal support below the camera support base reads [D]INEMA EQUIPMENT CO. No manufacturer details available online. Tripod dimensions are 124.1x14.7x14.7 cm. The legs of the tripod are wood, with metal spikes at the bottoms, metal brackets, and a metal camera support rig [possibly cast iron]. The legs are held together with a buckled strip of leather at the bottom. Also in the case is a metal pole with a black plastic handle that can screw into the camera support base for use as a controller and a plastic zip-lock baggie containing a length of chain with 4 metal clasps throughout 286.0 cm in length.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0081 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800
- Catalogue Number
- 104.41.1125 a-b
- Description
- Two identical metal tripods with burgundy legs attached with white string. Three adjustable knobs are located at the top of the tripod allowing the metal bar inside to be adjusted maximizing the height. The folding and collapsible legs extend away from the vertical center in three sections to a len…
- Title
- Camera Tripod
- Date
- 1800
- Description
- Two identical metal tripods with burgundy legs attached with white string. Three adjustable knobs are located at the top of the tripod allowing the metal bar inside to be adjusted maximizing the height. The folding and collapsible legs extend away from the vertical center in three sections to a length of 54.0 cm. A fourth adjustable knob, located at the bottom of the metal bar and meeting the top of the legs, allows the user to extend the legs of the tripod to the desired height. Each of the four knobs has the maker’s mark inscribed and reads: “ACME- LITE-CHICAGO- ” around the circumference. The feet are at a 45 degree angle and have a rubber stopper on the bottom giving the portable three-legged frame greater stability to resist lateral forces. A tripod may have been used for motion and still photography to prevent movement or to help achieve precise framing of an image.
- Subject
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1125 a-b
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1991
- Material
- metal
- Catalogue Number
- 104.19.0176
- Description
- A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
1 image
- Title
- Can Opener
- Date
- 1991
- Material
- metal
- Dimensions
- 2.0 x 2.0 x 6.5 cm
- Description
- A tiny metal cylinder, shaped like a beer can and covered in a wrap advertising “Miller HIGH LIFE”. The cylinder has a small brass button on the top that, when pressed, releases a metal bottle opener from the opposite end. The end with the bottle opener is stamped with “MADE IN W. GERMANY”
- Subject
- Whyte home
- drinking
- tools
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0176
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1800 – 1875
- Material
- metal
- Catalogue Number
- 102.05.0076
- Description
- Scissor-like snuffer on three ball supports. Scissor motion opens door on snuffing chamber. In its 19th century usage on longer wicks the opened door would catch the wick, shear it and extinguish it and the burnt portion of the wick would be left in the chamber. Scissor and handle tops have relief …
1 image
- Title
- Candlesnuffer
- Date
- 1800 – 1875
- Material
- metal
- Dimensions
- 4.7 x 6.7 x 18.3 cm
- Description
- Scissor-like snuffer on three ball supports. Scissor motion opens door on snuffing chamber. In its 19th century usage on longer wicks the opened door would catch the wick, shear it and extinguish it and the burnt portion of the wick would be left in the chamber. Scissor and handle tops have relief floral decoration. Chamber top has relief rampant lion. Hallmarks on chamber door include "X", a crown and a cross (?) within crest.
- Subject
- households
- decorative
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0076
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1860 – 1940
- Material
- metal
- Catalogue Number
- 102.05.0078
- Description
- Copper candlestick is erected in centre of oval dish. Candlestick has curved handle at top rim and is unique because of notched slot which runs height of candlestick, in which candleholder proper can be raised to one of four positions as wax melts and candle is shortened. Candleholder proper attach…
1 image
- Title
- Candlestick
- Date
- 1860 – 1940
- Material
- metal
- Dimensions
- 18.5 x 13.8 x 21.0 cm
- Description
- Copper candlestick is erected in centre of oval dish. Candlestick has curved handle at top rim and is unique because of notched slot which runs height of candlestick, in which candleholder proper can be raised to one of four positions as wax melts and candle is shortened. Candleholder proper attached with small, flat handle which serves as hook for fitting into notches. Stick soldered to dish with brass.
- Subject
- households
- decorative
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0078
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1861 – 1861
- Material
- wood; metal, gold; metal, lead
- Catalogue Number
- 103.08.0102
- Description
- A straight wooden walking stick with gold over lead at the handle. The gold handle is inscribed: “To Henry Moore, token of respect by his employees, Cleveland, May 23, 1861”.
1 image
- Title
- Cane
- Date
- 1861 – 1861
- Material
- wood; metal, gold; metal, lead
- Dimensions
- 58.0 cm
- Description
- A straight wooden walking stick with gold over lead at the handle. The gold handle is inscribed: “To Henry Moore, token of respect by his employees, Cleveland, May 23, 1861”.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 103.08.0102
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.