Skip header and navigation

Narrow Results By

13 records – page 1 of 1.

Date
1792
Material
wood; grass; metal
Catalogue Number
102.03.0091
Description
Sturdy chest, dovetailed corners, deep, fitted with hand-wrought hinges. Interior has small drawer and lidded shelf at one end top. Fitted with rope handles for carrying. Previously painted blue, remnants of stain on inside of lid and beside hardware. “Robert Procter . . . 1792” written in ink on …
  1 image  
Title
Blanket Chest
Date
1792
Material
wood; grass; metal
Dimensions
48.3 x 48.5 x 124.3 cm
Description
Sturdy chest, dovetailed corners, deep, fitted with hand-wrought hinges. Interior has small drawer and lidded shelf at one end top. Fitted with rope handles for carrying. Previously painted blue, remnants of stain on inside of lid and beside hardware. “Robert Procter . . . 1792” written in ink on inside of lid.
Subject
households
furniture
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
102.03.0091
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1920 – 1960
Material
wood; metal
Catalogue Number
102.03.1023
Description
Small wooden cabinet, stained dark and varnished. Two doors at front open outward from center.
  1 image  
Title
Cabinet
Date
1920 – 1960
Material
wood; metal
Description
Small wooden cabinet, stained dark and varnished. Two doors at front open outward from center.
Subject
households
furniture
Credit
Gift of Unknown, 1968
Catalogue Number
102.03.1023
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1925 – 1940
Material
wood; metal
Catalogue Number
102.03.1004
Description
varnished wood, branch legs with burl growth, adjustable chair back, (3 positions), made of a cross section of coniferous tree with bark edge intact, two long arm rests, on back of the top of the rests are 4 metal rods attached, a metal rod sits between these to support chair back, arms are low w…
  1 image  
Title
Chair
Date
1925 – 1940
Material
wood; metal
Dimensions
81.5 x 64.6 x 80.5 cm
Description
varnished wood, branch legs with burl growth, adjustable chair back, (3 positions), made of a cross section of coniferous tree with bark edge intact, two long arm rests, on back of the top of the rests are 4 metal rods attached, a metal rod sits between these to support chair back, arms are low with short branch supports with burl growth, seat is length section of conifer rounded edges, branch legs with burl growth, cross braced with same
Subject
households
furniture
Credit
Gift of Unknown, 1968
Catalogue Number
102.03.1004
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1825 – 1875
Material
wood, mahogany; glass; metal, brass
Catalogue Number
102.03.0014
Description
Standing mirror with acorn finials and a platform base with claw feet. The mirror frame has two pivot points, located midway in the height of the mirror, attached to two side supports so that the mirror angle can be changed.
  1 image  
Title
Cheval Mirror
Date
1825 – 1875
Material
wood, mahogany; glass; metal, brass
Dimensions
193.0 x 61.0 x 86.6 cm
Description
Standing mirror with acorn finials and a platform base with claw feet. The mirror frame has two pivot points, located midway in the height of the mirror, attached to two side supports so that the mirror angle can be changed.
Subject
households
furniture
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
102.03.0014
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1920 – 1940
Catalogue Number
102.03.0005 a-f
Description
A set of six ladder -back dining chairs, each with rust-coloured velvet upholstery on the seat. Each chair has rectangular brass inlay as a border trim on the back brackets and a turned wood piece as the top rail on the chair back.
  1 image  
Title
Dining Chair
Date
1920 – 1940
Dimensions
83.0 x 54.0 x 49.8 cm
Description
A set of six ladder -back dining chairs, each with rust-coloured velvet upholstery on the seat. Each chair has rectangular brass inlay as a border trim on the back brackets and a turned wood piece as the top rail on the chair back.
Subject
households
furniture
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
102.03.0005 a-f
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1825 – 1875
Material
wood, mahogany; metal, brass
Catalogue Number
102.03.0013
Description
A chest of drawers with an inlaid bowed front, this chest has five drawers with brass drawer pulls.
  1 image  
Title
Drawers Chest
Date
1825 – 1875
Material
wood, mahogany; metal, brass
Dimensions
92.0 x 63.0 x 116.0 cm
Description
A chest of drawers with an inlaid bowed front, this chest has five drawers with brass drawer pulls.
Subject
households
furniture
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
102.03.0013
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1920 – 1950
Material
wood; fibre
Catalogue Number
102.03.0043
Description
Two easy chairs, with loose seat and back cushions. The original upholstery of both chairs is a loose open weave. Both chairs have been slip covered with peach cotton fabric.
  1 image  
Title
Easy Chair
Date
1920 – 1950
Material
wood; fibre
Dimensions
76.0 x 90.0 x 70.0 cm
Description
Two easy chairs, with loose seat and back cushions. The original upholstery of both chairs is a loose open weave. Both chairs have been slip covered with peach cotton fabric.
Subject
households
furniture
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
102.03.0043
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1920 – 1935
Material
wood; metal
Catalogue Number
102.03.1003
Description
large black stained oak folding partition screen, 3 folding sections each consisting of 2 horizontal boards at top, 4 vertical boards in middle, and 3 more horizontal boards at bottom, top board incised with stylized floral and ribbon pattern stained pink and black against green background, screen …
  1 image  
Title
Folding Screen
Date
1920 – 1935
Material
wood; metal
Dimensions
174.0 x 3.7 x 151.5 cm
Description
large black stained oak folding partition screen, 3 folding sections each consisting of 2 horizontal boards at top, 4 vertical boards in middle, and 3 more horizontal boards at bottom, top board incised with stylized floral and ribbon pattern stained pink and black against green background, screen sections hinged vertically to fold like accordion
Subject
households
furniture
Credit
Gift of Unknown, 1968
Catalogue Number
102.03.1003
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1920 – 1940
Material
wood; skin; metal
Catalogue Number
102.03.0023
Description
T-shaped footstool formed from two pieces of wood. One side of the T, one of the two right angles, is padded with red leather upholstery and brass tacks. A hand hole is placed through the end of the long leg (the stem of the T) for carrying.
  1 image  
Title
Footstool Stool
Date
1920 – 1940
Material
wood; skin; metal
Dimensions
48.0 x 28.0 x 48.5 cm
Description
T-shaped footstool formed from two pieces of wood. One side of the T, one of the two right angles, is padded with red leather upholstery and brass tacks. A hand hole is placed through the end of the long leg (the stem of the T) for carrying.
Subject
households
furniture
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
102.03.0023
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1924
Material
wood; metal; plastic; glass; fibre
Catalogue Number
105.04.1016 a-c
Description
A peanut tube (three-tube) radio enclosed in a varnished brown wooden box/cabinet (a) with a hinged lid. The lid has two small metal screw eyes on each side of the inside (2.0cm from the corner) attaching it to the cabinet which has two metal hooks (2.0cm down from the front corner) screwed into pl…
  1 image  
Title
Peanut Tube Radio
Date
1924
Material
wood; metal; plastic; glass; fibre
Dimensions
26 x 18 x 32.5 cm
Description
A peanut tube (three-tube) radio enclosed in a varnished brown wooden box/cabinet (a) with a hinged lid. The lid has two small metal screw eyes on each side of the inside (2.0cm from the corner) attaching it to the cabinet which has two metal hooks (2.0cm down from the front corner) screwed into place on both sides. These are used to close the lid securely to the main cabinet. A paper diagram of the circuitry board is tacked to the obverse side of the lid with six metal thumbtacks. The diagram outlines the blueprint of the radio (b), which is separate from the cabinet; the radio slides out of the front from two grooves cut into the sides of the cabinet. The cabinet has two holes bored into the back to attach it to a wall. The front of the radio has a plastic panel secured in place to the base, which is a flat piece of wood, by the dials etc. and four screws on the bottom. Extreme left in the top and bottom corner are two small black plastic knobs; the top knob is the antennae, the bottom is the ground knob. In between these to the middle left is a large plastic knob, black with degrees marked in white, adjustable control (0 increasing by 10’s to a 100 degrees) for station tuning; the small knob in centre (starting at 0 increasing by 5 degrees to 2, then 3, both left and right) is for fine tuning. Next, to the top right is an adjustable black knob with a bent metal contact piece attached; it moves left and right moving to make contact with five metal posts used for switching to different radio bands; two metal posts, one at either end, are used to keep the metal contact piece within the five contact points radius. Below this is a plain black plastic adjustable knob used for sensitivity control for the strength of radio station waves. This goes in and out, further and closer, (it is attached to wires covered with a textile). To the right of these are three black plastic knobs adjustable rheostats (that control the filaments of the three tubes inside (R215-A Vacuum tube); this is the volume control. Three nuts (jack has a thread on it to keep in place) are for jacks for headphone output. Jack 3, closest to the edge of the radio, also controls the switch to the speaker (if you want to have a speaker hooked up to loudspeaker). There are two wires attached different colours; they have a sleeve on the corners so it doesn’t short-circuit.The headphones (c) are hard plastic earpieces (6 cm. in diametre); one has a metal back with “FROST (F)ONES NO. 161 1000” , and three screws underneath the lettering; the other is black hard Bakelite plastic with “National” written in script ,“ELECTRIC” in the tail of the L, underneath that “OHMS 100C SINGLE”, two screws and nuts attaching two-fibre covered wires on either side that connect to the plastic and metal jack plug, “MNFD. BY THE NATIONAL ELECTRIC HEATING COMPANY LIMITED TORONTO CANADA”. Each earpiece has a metal piece attached by rivets to each side allowing it to move. The two-band fibre-covered headpiece is connected to the metal piece by two metal wires. The two fibre-cover wires extending from the earphones are joined and covered with a black cord wound around until it forms a loop which is knotted to close. Two plugs that fit into the jack attachment BARKEKLEW SERIESPAT. PENDING NUMBERS 1,2,3,4, negative on the left side and positive on the right making 8 hole plugs, 2 screws in the place attaching to the metal jack that plugs into the radio.Blueprint hand drawn for back.
Subject
households
furniture
entertainment
Credit
Gift of Lorne Cooley, Banff, 2008
Catalogue Number
105.04.1016 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1920 – 1950
Material
wood, maple; fibre, cotton; metal
Catalogue Number
102.03.0050
Description
Four position Morris (reclining) chair, with a slat back and metal adjusting rod. Arms supported by carved (twisted) pieces of wood, inscribed design on centre of front of seat, four carved claw feet. Batik style cotton upholstery on back and seat with repeated pattern.
  1 image  
Title
Reclining Chair
Date
1920 – 1950
Material
wood, maple; fibre, cotton; metal
Dimensions
96.0 x 88.0 x 78.0 cm
Description
Four position Morris (reclining) chair, with a slat back and metal adjusting rod. Arms supported by carved (twisted) pieces of wood, inscribed design on centre of front of seat, four carved claw feet. Batik style cotton upholstery on back and seat with repeated pattern.
Subject
households
furniture
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
102.03.0050
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1920 – 1930
Material
metal
Catalogue Number
102.03.1013
Description
A single brass bed frame and mattress.
Title
Single Bed
Date
1920 – 1930
Material
metal
Description
A single brass bed frame and mattress.
Subject
households
furniture
Dr. McLaren
Credit
Purchased from Ken Campbell, Qualicum Beach, 1987
Catalogue Number
102.03.1013
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1825 – 1900
Material
wood, mahogany; wood; metal, brass
Catalogue Number
102.03.0036
Description
Inlaid mahogany oval tea table with squared tapering legs. Half of the table top folds over to store as semi-circle. The table has a red, hard to read, label “Once owned by Eliza Schaeffer 18__ - belongs to L. D. Schaeffer”
  1 image  
Title
Tea Table
Date
1825 – 1900
Material
wood, mahogany; wood; metal, brass
Dimensions
72.0 x 88.8 x 90.5 cm
Description
Inlaid mahogany oval tea table with squared tapering legs. Half of the table top folds over to store as semi-circle. The table has a red, hard to read, label “Once owned by Eliza Schaeffer 18__ - belongs to L. D. Schaeffer”
Subject
households
furniture
Mary Schaffer
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
102.03.0036
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

13 records – page 1 of 1.

Back to Top