Skip header and navigation

Narrow Results By

88 records – page 1 of 5.

Date
1930 – 1940
Material
cardboard, leatherette; glass, metal;
Catalogue Number
104.41.1053
Description
Kodak Anniversary box camera; brown, textured leather covered cardboard for body; leather strap on top;viewfinder window; body back clip top; viewfinder lens; internal lens front; body back clip; shutter release; film advance; foil decal commemorating 50th Anniversary on side; amber window at back.
  1 image  
Title
Box Camera
Date
1930 – 1940
Material
cardboard, leatherette; glass, metal;
Dimensions
14.7 x 11.1 x 8.4 cm
Description
Kodak Anniversary box camera; brown, textured leather covered cardboard for body; leather strap on top;viewfinder window; body back clip top; viewfinder lens; internal lens front; body back clip; shutter release; film advance; foil decal commemorating 50th Anniversary on side; amber window at back.
Subject
photography
Credit
Gift of Robert N. Smith, Canmore, 1985
Catalogue Number
104.41.1053
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1938
Material
metal; glass; paper
Catalogue Number
104.41.1113 a,b
Description
A simple black box camera with black, simulated textured leather. It also has an adhesive-taped, original box. The inverted aperture in the front has a black metal retention ring surrounding it. Below this “Agfa” is imprinted on the camera, surrounded by a diamond-shaped box. There is a black metal…
  1 image  
Title
Box Camera
Date
1938
Material
metal; glass; paper
Dimensions
8.5 x 6.5 cm
Description
A simple black box camera with black, simulated textured leather. It also has an adhesive-taped, original box. The inverted aperture in the front has a black metal retention ring surrounding it. Below this “Agfa” is imprinted on the camera, surrounded by a diamond-shaped box. There is a black metal rim which overlaps the edges on the front of the camera; on both sides there is a slight extension, .03 x.05 wide, 2.0cm from the top, with a hole in the metal. This fits over two small metal knobs on each side of the camera body. It appears that pushing the knobs in and pulling, would release the front part of the camera from the body. On the viewer’s left is the metal shutter release; a small metal lever that can be pulled down to release the shutter and expose the lens from inside the body. On the same side is the metal film winder, 3.0cm from the front and .50cm from the top; this is a flat piece of metal 2.0cm in diameter, with arrows indicating the direction to turn (clockwise arrows), a round raised metal tab, onto which is screwed a piece of metal (2.5cmx1.0cm wide in the middle) to wind the film. It can also be pulled out to release the metal film chamber. The metal is turned down on the side of each end so the fingers can grasp it for turning. A metal folding viewfinder is .50cm from the back and 2.7cm from top and bottom; a flat piece of metal 3.0cm sq., folded at the sides, is rivetted onto the body. Two flat metal pieces are attached at each end, one on a spring to fold down; this piece is 2.4x2.7cm wide with a window cut out .50x1.0cm wide. The other piece is 2.7cm sq. with a window of 1.5x2.4cm wide; the cutout has a piece of metal raised from the bottom of the window. The cutout is for perspective when you look through the viewfinder, vertically or horizontally. This piece of metal folds down to become the top, effectively making the viewfinder flat when not in use. There is a hinged door on the back of the camera and a cut-out metal latch on the door that connects to a small metal knob 1.0cm from the edge of the body. There is a red circle film window (1.0cm diagonally) which lets you read the frame number on the film. On the inside of the door are two rivets that connect the hinge. Above that and below the red circle, is a white painted circle with “USE AB” printed in black, overlapping a painted orange, blue, white, and yellow Agfa Plenachrome film box. The red viewfinder is 4.0cm from the base. A metal film chamber, with two metal rollers on each end for winding the film on, fits inside the camera. It can be released by pulling out the film winder. The canister is 7.0x5.0 wide, is open at one end, hollow in the centre, sloping upwards with a circular hole at the other end to let light in. There are two sprockets sitting on two cutouts on top of the canister and two on the bottom, onto which the film is winded. There are two rivets attaching two Y-shaped metal pieces, on either end that guide and let the film move and roll. The top of the camera has two metal knobs 1.5cm crosswise from each end, where a leather strap with a hole on either end, .07cm from the edge, fits in to make a diagonal strap/handle for carrying. The strap is imprinted with “A-8 CADET”. There is a small metal pull-up tab, 1.0cm from the edge of the front of the camera, that lets you time the shutter speed.
Subject
households
photography
hobbies
Bob Louden
Credit
Gift of Bob Louden, Calgary, 2004
Catalogue Number
104.41.1113 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1940
Material
metal; glass; skin
Catalogue Number
104.41.1064
Description
One Jhagee Exakta SLR 35mm with a leather case. This metal camera is built for a left-handed user.
  1 image  
Title
Camera
Date
1930 – 1940
Material
metal; glass; skin
Description
One Jhagee Exakta SLR 35mm with a leather case. This metal camera is built for a left-handed user.
Subject
Byron Harmon
photography
Credit
Gift of Jim Davies, Banff, 1991
Catalogue Number
104.41.1064
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1885 – 1890
Material
wood; metal; skin
Catalogue Number
104.41.1010 a,b
Description
“Premo D” folding camera (4”x5” format) with a leather covered wooden frame. The camera has a leather handle centred on the top and held in place with brass keepers. The hinged front of the camera opens to lie flat and has a brass track (3.2 cm wide) running down the centre. The red leather bell…
  1 image  
Title
Camera
Date
1885 – 1890
Material
wood; metal; skin
Dimensions
12.0 x 14.5 x 17.5 cm
Description
“Premo D” folding camera (4”x5” format) with a leather covered wooden frame. The camera has a leather handle centred on the top and held in place with brass keepers. The hinged front of the camera opens to lie flat and has a brass track (3.2 cm wide) running down the centre. The red leather bellows extend along the track and end with a wooden frame that holds a lens (missing) and a viewfinder. The camera also has hinged doors on the right side and on the back.b) Film plate holder loaded in the camera’s side chamber.
Subject
households
photography
hobbies
Credit
Gift of Unknown, 1968
Catalogue Number
104.41.1010 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1969 – 1980
Material
plastic; metal; fibre
Catalogue Number
104.41.1111
Description
Camera, accesories and instruction booklets in a black case with metal hinges and clasp. The camera is a “POLAROID LAND CAMERA 360” with a flash, bellows and instructions printed on various parts of the camera. The case also contains empty film packs, instruction booklets, an electronic flash, a ch…
  1 image  
Title
Camera
Date
1969 – 1980
Material
plastic; metal; fibre
Dimensions
11.8 x 27.0 x 38.7 cm
Description
Camera, accesories and instruction booklets in a black case with metal hinges and clasp. The camera is a “POLAROID LAND CAMERA 360” with a flash, bellows and instructions printed on various parts of the camera. The case also contains empty film packs, instruction booklets, an electronic flash, a charger for the flash unit, two batteries, and a “POLAROID CLOSE-UP KIT” in a white and grey plastic case. There is also a receipt and business card from “Super S Drugs Ltd.” The address on the card is “Head Office - 14th Street S. W. at 11th and 12th Avenues CALGARY 3, CANADA.”
Subject
photography
Polaroid
Credit
Gift of Unknown, 1968
Catalogue Number
104.41.1111
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1969 – 1975
Material
metal; plastic; glass;
Catalogue Number
104.41.0150
Description
An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
  1 image  
Title
Camera
Date
1969 – 1975
Material
metal; plastic; glass;
Dimensions
14.4 x 18.0 x 14.5 cm
Description
An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
Subject
Nicholas Morant
photography
camera equipment;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0150
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
metal, glass, leather
Catalogue Number
104.41.1026
Description
miniature camera, case and film; black , die cast steel body; no glass; viewfinder, chrome lens; filmadvance; body back latch; empty film spool inside; brass with steel ends;"Belgium" stamp on either steel end; small red window on camera back; "TSLULCA" marked on lens front; leather case (16.7 x 8.…
  1 image  
Title
Camera
Date
1930 – 1950
Material
metal, glass, leather
Dimensions
3.8 x 5.7 x 4.3 cm
Description
miniature camera, case and film; black , die cast steel body; no glass; viewfinder, chrome lens; filmadvance; body back latch; empty film spool inside; brass with steel ends;"Belgium" stamp on either steel end; small red window on camera back; "TSLULCA" marked on lens front; leather case (16.7 x 8.5 x 8.2); zipper "Japan"stamped on leather; 2 rolls "ULCA Film" 8 exposure; made in Belgium; pinkcontainer with screws, glass discs, dial with "T B I" stamped onto surface.
Subject
photography
Dr. Kennedy
Credit
Gift of Ernest Kennedy, 1968
Catalogue Number
104.41.1026
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
metal, glass
Catalogue Number
104.41.1025
Description
vest camera, Olympic; black, bakelite body; hinged back; release is small chrome button opposite hinge; chrome dials top and bottom; tripod mount; distance guide beside lensfocus ring; "Olympic" RODENSTEIN PERISKOP JAPAR 1:8" with large small lever inbetween, on lens; (lens is detached); 2 small or…
  1 image  
Title
Camera
Date
1930 – 1950
Material
metal, glass
Dimensions
4.3 x 9.1 x 7.4 cm
Description
vest camera, Olympic; black, bakelite body; hinged back; release is small chrome button opposite hinge; chrome dials top and bottom; tripod mount; distance guide beside lensfocus ring; "Olympic" RODENSTEIN PERISKOP JAPAR 1:8" with large small lever inbetween, on lens; (lens is detached); 2 small orange coloured windows on bodyblack steel spool inside. Made in Japan.
Subject
photography
Dr. Kennedy
Credit
Gift of Ernest Kennedy, 1968
Catalogue Number
104.41.1025
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1965 – 1975
Material
plastic, glass, metal
Catalogue Number
104.41.1051
Description
Instantmatic with flash and bulbs in case; grey plastic body, colour black and white selection knob with manufacturer's name on face plate; fitted lens; viewfinder window top left corner; camera back release on bottom next to film advance knob; cloth strap;viewfinder eyepiece top left corner; frame…
  1 image  
Title
Camera
Date
1965 – 1975
Material
plastic, glass, metal
Dimensions
22.3 x 9.6 x 13.4 cm
Description
Instantmatic with flash and bulbs in case; grey plastic body, colour black and white selection knob with manufacturer's name on face plate; fitted lens; viewfinder window top left corner; camera back release on bottom next to film advance knob; cloth strap;viewfinder eyepiece top left corner; frame number window in middle of back; 2 sockets for flash attachment; red button on top for shutter release; flash attachment - 2 brass prongs on bottom; reflective concave dish with bulb socket in centre; red button on back for releasing spent bulbs; screw for opening to insert batteries; 2 packages "Sylvania" flashbulbs; hard grey plastic case; depressions inside for flash and camera.
Subject
photography
Credit
Gift of Robert N. Smith, Canmore, 1985
Catalogue Number
104.41.1051
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
metal, glass, paper, leather
Catalogue Number
104.41.1003 b
Description
2 cigar boxes containing miscellaneous camera accessories:box b: wooden box "La Palina deluxe"; 7 boxes "Univex" 8 mm motion picturefilm; 3 developed, 4 unexposed; 1 box "Kodachrome" 16 mm motion picture film,unopened; 1 box "Verichrome" unopened; 1 box "Panchromatic-X" opened,unexposed; diaphragm …
  1 image  
Title
Camera Accessories
Date
1930 – 1950
Material
metal, glass, paper, leather
Dimensions
7.0 x 14.1 x 23.1 cm
Description
2 cigar boxes containing miscellaneous camera accessories:box b: wooden box "La Palina deluxe"; 7 boxes "Univex" 8 mm motion picturefilm; 3 developed, 4 unexposed; 1 box "Kodachrome" 16 mm motion picture film,unopened; 1 box "Verichrome" unopened; 1 box "Panchromatic-X" opened,unexposed; diaphragm and shutter apparatus; silver film container, negativesinside; green label "Superpan"; black film in cut up box; film spool "Pathe"film strip viewer; filmstrip included; 2 green filters with lever; small boxwith circle cut one side, square with ground glass, circular box with squarecut, ground glass taped on; small lens in paper envelope; box withmiscellaneous parts; viewfinders, screws, washers, etc.
Subject
photography
Dr Kennedy
Credit
Gift of Ernest Kennedy, 1968
Catalogue Number
104.41.1003 b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1967 – 1990
Material
metal; plastic; fabric
Catalogue Number
104.41.0097
Description
Dull grey travel case with shiny metal corner brackets, reinforcements along the edges, handle on the lid, and two lockable clasps. A black label underneath the handle on the lid reads “ASAHI PENTAX 6x7 TAKUMAR 1:4 f=600mm ASAHI OPT. CO. JAPAN.” Attached to the handle is a brown leather travel tag …
  1 image  
Title
Camera Case
Date
1967 – 1990
Material
metal; plastic; fabric
Dimensions
25.5 x 23.9 x 45.5 cm
Description
Dull grey travel case with shiny metal corner brackets, reinforcements along the edges, handle on the lid, and two lockable clasps. A black label underneath the handle on the lid reads “ASAHI PENTAX 6x7 TAKUMAR 1:4 f=600mm ASAHI OPT. CO. JAPAN.” Attached to the handle is a brown leather travel tag with a clear plastic window - visible through the window is a white card that reads “N Morant Special Photographer Public Relations and Advertising Canadian Pacific Banff, Alberta.”The interior of the case is lined with red velvet and consists of different-shaped supports throughout the main body and inside the lid. Case most likely used to house Pentax camera bodies and lenses.
Subject
Nicholas Morant
photography
camera equipment
Canadian Pacific Railway
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0097
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1969 – 1975
Material
metal; leather; plastic; fabric; paper; wood;
Catalogue Number
104.41.0169 a-d
Description
Black hard-sided travel case with silver metal brackets on the corners and, two metal clasps holding the hinged lid closed, a central slide lock [unlocked], metal loop attachments on both short sides [possibly for a carry strap], and a leather handle attached to the lid with metal loops. The exteri…
  1 image  
Title
Camera Case
Date
1969 – 1975
Material
metal; leather; plastic; fabric; paper; wood;
Dimensions
25.2 x 19.7 x 33.5 cm
Description
Black hard-sided travel case with silver metal brackets on the corners and, two metal clasps holding the hinged lid closed, a central slide lock [unlocked], metal loop attachments on both short sides [possibly for a carry strap], and a leather handle attached to the lid with metal loops. The exterior of the case has the remnants of several different shipping labels [mostly on the front], a piece of masking tape along the right-hand side of the lid has “PENTAX 6x7” written in blue ink, and “FRAGILE” stenciled in white along the lid. The interior is lined in blue velvet - the body of the case is divided into two compartments and there are velvet-covered spacers in the larger compartment and in the lid to keep contents from shifting. Inside the case is a fabric camera strap still in its original plastic packaging, a wood and metal handle camera attachment in its original Asahi cardboard box [the box has several strips of masking tape throughout, none of which keep it closed], an Asahi Pentax lens hood in a black leather pouch, and a screw.
Subject
Nicholas Morant
photography
camera
camera equipment
travel;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0169 a-d
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1962 – 1965
Material
leather; fabric; metal; glass; plastic;
Catalogue Number
104.41.0138
Description
A Mamiya twin reflex lens with a plastic lens cap housed in a leather case lined with red velvet. The lens has a solid metal mount where it fits into a camera. Both lenses are 1:4.5 f=18cm.The case has a leather hinged lid, leather brackets on both short sides where a strap could be attached, and i…
  1 image  
Title
Camera Lens
Date
1962 – 1965
Material
leather; fabric; metal; glass; plastic;
Dimensions
11.0 x 8.5 x 13.5 cm
Description
A Mamiya twin reflex lens with a plastic lens cap housed in a leather case lined with red velvet. The lens has a solid metal mount where it fits into a camera. Both lenses are 1:4.5 f=18cm.The case has a leather hinged lid, leather brackets on both short sides where a strap could be attached, and is held closed with a snap on a leather tab.
Subject
Nicholas Morant
photography
camera equipment;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0138
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1931 – 1942
Material
metal; glass;
Catalogue Number
104.41.0214
Description
Ernst Leitz Wetzlar Hektor f=7,3 cm 1:1,9 lens with hood and lens cap in a metal tube case. The lens cap has Leica engraved on it - the case has the manufacturer name and the lens size stamped on the lid, which slides up off the tube.
  1 image  
Title
Camera Lens
Date
1931 – 1942
Material
metal; glass;
Dimensions
8.6 cm
Description
Ernst Leitz Wetzlar Hektor f=7,3 cm 1:1,9 lens with hood and lens cap in a metal tube case. The lens cap has Leica engraved on it - the case has the manufacturer name and the lens size stamped on the lid, which slides up off the tube.
Subject
camera equipment
photography
photography equipment
camera accessories;
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.41.0214
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1883 – 1926
Material
cardboard; metal; glass;
Catalogue Number
104.41.0129 a,b
Description
Two camera lenses housed in a repurposed Hammond box with “OLD ‘ADON’ Telephoto in shutter circa 1990’s” written in black ink on the front.The larger lens with shutter was manufactured by Bausch & Lomb Optical Co., originally a company that produced prescription eye-wear in the mid to late-1800s be…
  1 image  
Title
Camera Lenses
Date
1883 – 1926
Material
cardboard; metal; glass;
Dimensions
5.7 x 7.8 x 14.5 cm
Description
Two camera lenses housed in a repurposed Hammond box with “OLD ‘ADON’ Telephoto in shutter circa 1990’s” written in black ink on the front.The larger lens with shutter was manufactured by Bausch & Lomb Optical Co., originally a company that produced prescription eye-wear in the mid to late-1800s before expanding into camera lenses and microscopes/telescopes towards the turn of the century. The company was founded in Rochester NY.The smaller lens was manufactured by Gundlach-Manhattan Optical Co., a merged company between Gundlach Optical Co. and Manhattan Optical Co. that took place in 1902, which produced various kinds of bellows cameras. Both companies were based in Rochester NY prior to merging.
Subject
Nicholas Morant
photography
camera equipment;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0129 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1949
Material
wood; metal; plastic
Catalogue Number
104.41.0100
Description
Wood and metal Thalhammer camera tripod with metal spikes at the end of the legs, brackets at various points along the legs, and camera mount. The tripod is retracted to its shortest setting, but can double in height. Each leg has an adjustable metal bracket with circular knobs on the outside of th…
  1 image  
Title
Camera Tripod
Date
1930 – 1949
Material
wood; metal; plastic
Dimensions
88.8 cm
Description
Wood and metal Thalhammer camera tripod with metal spikes at the end of the legs, brackets at various points along the legs, and camera mount. The tripod is retracted to its shortest setting, but can double in height. Each leg has an adjustable metal bracket with circular knobs on the outside of the leg - the flat part of the knob features a kneeling man holding the handle of a long hammer in front of him, with his hands above his head just below the head of the hammer. This same logo is featured throughout other metal pieces around the head of the tripod. A plastic-handled grip is attached to the top of the tripod. Four circular pieces of paper screwed onto the camera support base, possibly as spacers, upon removal the Thalhammer company information is shown.
Subject
Nicholas Morant
photography
camera equipment
camera tripod;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0100
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1885 – 1900
Material
metal; skin
Catalogue Number
104.41.1104
Description
Metal box with opening compartments and leather carrying handle marked “45”. “Pat. May 31. 87. Aug. 3. 90” stamped on top. Spring loaded film changing apparatus inside.
  1 image  
Title
Cut-Film Holder
Date
1885 – 1900
Material
metal; skin
Dimensions
4.5 x 11.5 cm
Description
Metal box with opening compartments and leather carrying handle marked “45”. “Pat. May 31. 87. Aug. 3. 90” stamped on top. Spring loaded film changing apparatus inside.
Subject
photography
Vaux family
Credit
Gift of Molly Vaux, New York, USA, 1999
Catalogue Number
104.41.1104
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1980
Material
wood;
Catalogue Number
104.41.0227
Description
Wooden printing tongs. Two pieces of flat wood slotted into a solid wood cylinder with enough give in the wood to allow the end of the tongs to touch. On one side of the tongs black text is printed, it reads “DEVELOPER — REXO PRINT TONGS” and a small logo for Burke & James Photo Supplies.
  1 image  
Title
Developer Tongs
Date
prior to 1980
Material
wood;
Dimensions
1.6 x 2.1 x 24.3 cm
Description
Wooden printing tongs. Two pieces of flat wood slotted into a solid wood cylinder with enough give in the wood to allow the end of the tongs to touch. On one side of the tongs black text is printed, it reads “DEVELOPER — REXO PRINT TONGS” and a small logo for Burke & James Photo Supplies.
Subject
film photography
photography accessories
darkroom
Rexo
photography
Credit
Gift of L. A. E Duncan, Calgary, 1980
Catalogue Number
104.41.0227
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
plastic
Catalogue Number
104.41.1059
Description
Black plastic developing tank; black plastic cylinder with detachable lid; 6 groups of 4 ridges running the height of cylinder; lip surrounding opening at top; "PLANO" printed in relief on lid; 2 oblong holes to correspond to tongues on bottom section; olive colour spool with near spaced thread att…
  1 image  
Title
Developing Tank
Date
1930 – 1950
Material
plastic
Dimensions
12.0 x 12.4 cm
Description
Black plastic developing tank; black plastic cylinder with detachable lid; 6 groups of 4 ridges running the height of cylinder; lip surrounding opening at top; "PLANO" printed in relief on lid; 2 oblong holes to correspond to tongues on bottom section; olive colour spool with near spaced thread attached to lid with finger knob coming through to outside.
Subject
photography
Credit
Gift of Robert N. Smith, Canmore, 1985
Catalogue Number
104.41.1059
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1989
Material
synthetic, plastic; paper
Catalogue Number
104.41.1066
Description
A Fujicolor Quicksnap Flash disposable camera. A black plastic camera in a green, white, black and gold box. It has instructions for taking the photographs on the back. Battery and film removed for processing. Made in Japan.
  1 image  
Title
Disposable Camera
Date
prior to 1989
Material
synthetic, plastic; paper
Dimensions
12.7 x 5.7 cm
Description
A Fujicolor Quicksnap Flash disposable camera. A black plastic camera in a green, white, black and gold box. It has instructions for taking the photographs on the back. Battery and film removed for processing. Made in Japan.
Subject
photography
Credit
Gift of Phyllis H. Horpenuk, Banff, 1989
Catalogue Number
104.41.1066
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

88 records – page 1 of 5.

Back to Top