Skip header and navigation

Narrow Results By

75 records – page 1 of 4.

Date
1930 – 1940
Material
cardboard, leatherette; glass, metal;
Catalogue Number
104.41.1053
Description
Kodak Anniversary box camera; brown, textured leather covered cardboard for body; leather strap on top;viewfinder window; body back clip top; viewfinder lens; internal lens front; body back clip; shutter release; film advance; foil decal commemorating 50th Anniversary on side; amber window at back.
  1 image  
Title
Box Camera
Date
1930 – 1940
Material
cardboard, leatherette; glass, metal;
Dimensions
14.7 x 11.1 x 8.4 cm
Description
Kodak Anniversary box camera; brown, textured leather covered cardboard for body; leather strap on top;viewfinder window; body back clip top; viewfinder lens; internal lens front; body back clip; shutter release; film advance; foil decal commemorating 50th Anniversary on side; amber window at back.
Subject
photography
Credit
Gift of Robert N. Smith, Canmore, 1985
Catalogue Number
104.41.1053
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1938
Material
metal; glass; paper
Catalogue Number
104.41.1113 a,b
Description
A simple black box camera with black, simulated textured leather. It also has an adhesive-taped, original box. The inverted aperture in the front has a black metal retention ring surrounding it. Below this “Agfa” is imprinted on the camera, surrounded by a diamond-shaped box. There is a black metal…
  1 image  
Title
Box Camera
Date
1938
Material
metal; glass; paper
Dimensions
8.5 x 6.5 cm
Description
A simple black box camera with black, simulated textured leather. It also has an adhesive-taped, original box. The inverted aperture in the front has a black metal retention ring surrounding it. Below this “Agfa” is imprinted on the camera, surrounded by a diamond-shaped box. There is a black metal rim which overlaps the edges on the front of the camera; on both sides there is a slight extension, .03 x.05 wide, 2.0cm from the top, with a hole in the metal. This fits over two small metal knobs on each side of the camera body. It appears that pushing the knobs in and pulling, would release the front part of the camera from the body. On the viewer’s left is the metal shutter release; a small metal lever that can be pulled down to release the shutter and expose the lens from inside the body. On the same side is the metal film winder, 3.0cm from the front and .50cm from the top; this is a flat piece of metal 2.0cm in diameter, with arrows indicating the direction to turn (clockwise arrows), a round raised metal tab, onto which is screwed a piece of metal (2.5cmx1.0cm wide in the middle) to wind the film. It can also be pulled out to release the metal film chamber. The metal is turned down on the side of each end so the fingers can grasp it for turning. A metal folding viewfinder is .50cm from the back and 2.7cm from top and bottom; a flat piece of metal 3.0cm sq., folded at the sides, is rivetted onto the body. Two flat metal pieces are attached at each end, one on a spring to fold down; this piece is 2.4x2.7cm wide with a window cut out .50x1.0cm wide. The other piece is 2.7cm sq. with a window of 1.5x2.4cm wide; the cutout has a piece of metal raised from the bottom of the window. The cutout is for perspective when you look through the viewfinder, vertically or horizontally. This piece of metal folds down to become the top, effectively making the viewfinder flat when not in use. There is a hinged door on the back of the camera and a cut-out metal latch on the door that connects to a small metal knob 1.0cm from the edge of the body. There is a red circle film window (1.0cm diagonally) which lets you read the frame number on the film. On the inside of the door are two rivets that connect the hinge. Above that and below the red circle, is a white painted circle with “USE AB” printed in black, overlapping a painted orange, blue, white, and yellow Agfa Plenachrome film box. The red viewfinder is 4.0cm from the base. A metal film chamber, with two metal rollers on each end for winding the film on, fits inside the camera. It can be released by pulling out the film winder. The canister is 7.0x5.0 wide, is open at one end, hollow in the centre, sloping upwards with a circular hole at the other end to let light in. There are two sprockets sitting on two cutouts on top of the canister and two on the bottom, onto which the film is winded. There are two rivets attaching two Y-shaped metal pieces, on either end that guide and let the film move and roll. The top of the camera has two metal knobs 1.5cm crosswise from each end, where a leather strap with a hole on either end, .07cm from the edge, fits in to make a diagonal strap/handle for carrying. The strap is imprinted with “A-8 CADET”. There is a small metal pull-up tab, 1.0cm from the edge of the front of the camera, that lets you time the shutter speed.
Subject
households
photography
hobbies
Bob Louden
Credit
Gift of Bob Louden, Calgary, 2004
Catalogue Number
104.41.1113 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1940
Material
metal; glass; skin
Catalogue Number
104.41.1064
Description
One Jhagee Exakta SLR 35mm with a leather case. This metal camera is built for a left-handed user.
  1 image  
Title
Camera
Date
1930 – 1940
Material
metal; glass; skin
Description
One Jhagee Exakta SLR 35mm with a leather case. This metal camera is built for a left-handed user.
Subject
Byron Harmon
photography
Credit
Gift of Jim Davies, Banff, 1991
Catalogue Number
104.41.1064
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1885 – 1890
Material
wood; metal; skin
Catalogue Number
104.41.1010 a,b
Description
“Premo D” folding camera (4”x5” format) with a leather covered wooden frame. The camera has a leather handle centred on the top and held in place with brass keepers. The hinged front of the camera opens to lie flat and has a brass track (3.2 cm wide) running down the centre. The red leather bell…
  1 image  
Title
Camera
Date
1885 – 1890
Material
wood; metal; skin
Dimensions
12.0 x 14.5 x 17.5 cm
Description
“Premo D” folding camera (4”x5” format) with a leather covered wooden frame. The camera has a leather handle centred on the top and held in place with brass keepers. The hinged front of the camera opens to lie flat and has a brass track (3.2 cm wide) running down the centre. The red leather bellows extend along the track and end with a wooden frame that holds a lens (missing) and a viewfinder. The camera also has hinged doors on the right side and on the back.b) Film plate holder loaded in the camera’s side chamber.
Subject
households
photography
hobbies
Credit
Gift of Unknown, 1968
Catalogue Number
104.41.1010 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1991
Material
metal; plastic
Catalogue Number
104.41.0254
Description
An Eastman Kodak Co. Camera , found in an avalanche slope behind Mount Edith on June 15 1991. The camera looks burnt, it is completely grey and rusted, many pieces are broken. It is housed in a Ziploc bag which catches the rust and corroded metal. There is still a roll of film in the camera.
  1 image  
Title
Camera
Date
prior to 1991
Material
metal; plastic
Dimensions
6.8 x 11.5 x 5.1 cm
Description
An Eastman Kodak Co. Camera , found in an avalanche slope behind Mount Edith on June 15 1991. The camera looks burnt, it is completely grey and rusted, many pieces are broken. It is housed in a Ziploc bag which catches the rust and corroded metal. There is still a roll of film in the camera.
Subject
photography
camera
avalanche
found item
Mount Edith
Credit
Gift of Adrian Phillips, Calgary, 1991
Catalogue Number
104.41.0254
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1976 – 1981
Material
metal; plastic; glass
Catalogue Number
104.41.0256
Description
A small-sized, black and silver mechanical camera by Agfa. The top of the camera features text that reads “tele” “AGFAMATIC 2008” “sensor”, on the right side is a large red button which release the shutter [this is a unique characteristic to Agfa cameras during this period] with a metal ring around…
  1 image  
Title
Camera
Date
1976 – 1981
Material
metal; plastic; glass
Dimensions
2.5 x 11.7 x 5.3 cm
Description
A small-sized, black and silver mechanical camera by Agfa. The top of the camera features text that reads “tele” “AGFAMATIC 2008” “sensor”, on the right side is a large red button which release the shutter [this is a unique characteristic to Agfa cameras during this period] with a metal ring around it, above the shutter release is two switches, one switch features symbols of a cloud and sun and the other switch features a small arrow when slide right it’ll point to “tele”. On the right side of the camera is a metal chain wrist strap. The back of the camera, where the viewfinder is, is narrow and features the viewfinder on the left side (on the silver part) and a clear window with to see into where the film is loaded with text that reads “AGFACOLOUR 110”. To load the camera there is another slide switch near the top of the back that release the panel. On the bottom of the camera is one slide switch that when slid to the left releases the silver part of the camera to reveal the viewfinder and allows the user to photograph. After each exposure the user slides the silver mechanism back into the black body of the camera [this is how the film advances]. The front of the camera features branding, from left to right the text reads “AGFAMATIC 2008” “tele pocket” “Agfa” in cursive font inside a diamond. When the camera is ready to use the front of the camera reveals the lens with white text that reads “COLOR AGNAR” and the viewfinder, on the back the viewfinder is useable.
Subject
film photography
camera
photography
Whyte
Whyte Home
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.41.0256
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
metal, glass, leather
Catalogue Number
104.41.1026
Description
miniature camera, case and film; black , die cast steel body; no glass; viewfinder, chrome lens; filmadvance; body back latch; empty film spool inside; brass with steel ends;"Belgium" stamp on either steel end; small red window on camera back; "TSLULCA" marked on lens front; leather case (16.7 x 8.…
  1 image  
Title
Camera
Date
1930 – 1950
Material
metal, glass, leather
Dimensions
3.8 x 5.7 x 4.3 cm
Description
miniature camera, case and film; black , die cast steel body; no glass; viewfinder, chrome lens; filmadvance; body back latch; empty film spool inside; brass with steel ends;"Belgium" stamp on either steel end; small red window on camera back; "TSLULCA" marked on lens front; leather case (16.7 x 8.5 x 8.2); zipper "Japan"stamped on leather; 2 rolls "ULCA Film" 8 exposure; made in Belgium; pinkcontainer with screws, glass discs, dial with "T B I" stamped onto surface.
Subject
photography
Dr. Kennedy
Credit
Gift of Ernest Kennedy, 1968
Catalogue Number
104.41.1026
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
metal, glass
Catalogue Number
104.41.1025
Description
vest camera, Olympic; black, bakelite body; hinged back; release is small chrome button opposite hinge; chrome dials top and bottom; tripod mount; distance guide beside lensfocus ring; "Olympic" RODENSTEIN PERISKOP JAPAR 1:8" with large small lever inbetween, on lens; (lens is detached); 2 small or…
  1 image  
Title
Camera
Date
1930 – 1950
Material
metal, glass
Dimensions
4.3 x 9.1 x 7.4 cm
Description
vest camera, Olympic; black, bakelite body; hinged back; release is small chrome button opposite hinge; chrome dials top and bottom; tripod mount; distance guide beside lensfocus ring; "Olympic" RODENSTEIN PERISKOP JAPAR 1:8" with large small lever inbetween, on lens; (lens is detached); 2 small orange coloured windows on bodyblack steel spool inside. Made in Japan.
Subject
photography
Dr. Kennedy
Credit
Gift of Ernest Kennedy, 1968
Catalogue Number
104.41.1025
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
metal, glass, paper, leather
Catalogue Number
104.41.1003 b
Description
2 cigar boxes containing miscellaneous camera accessories:box b: wooden box "La Palina deluxe"; 7 boxes "Univex" 8 mm motion picturefilm; 3 developed, 4 unexposed; 1 box "Kodachrome" 16 mm motion picture film,unopened; 1 box "Verichrome" unopened; 1 box "Panchromatic-X" opened,unexposed; diaphragm …
  1 image  
Title
Camera Accessories
Date
1930 – 1950
Material
metal, glass, paper, leather
Dimensions
7.0 x 14.1 x 23.1 cm
Description
2 cigar boxes containing miscellaneous camera accessories:box b: wooden box "La Palina deluxe"; 7 boxes "Univex" 8 mm motion picturefilm; 3 developed, 4 unexposed; 1 box "Kodachrome" 16 mm motion picture film,unopened; 1 box "Verichrome" unopened; 1 box "Panchromatic-X" opened,unexposed; diaphragm and shutter apparatus; silver film container, negativesinside; green label "Superpan"; black film in cut up box; film spool "Pathe"film strip viewer; filmstrip included; 2 green filters with lever; small boxwith circle cut one side, square with ground glass, circular box with squarecut, ground glass taped on; small lens in paper envelope; box withmiscellaneous parts; viewfinders, screws, washers, etc.
Subject
photography
Dr Kennedy
Credit
Gift of Ernest Kennedy, 1968
Catalogue Number
104.41.1003 b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1971 – 1973
Material
wood; metal; plastic; paper; leather;
Catalogue Number
104.41.0154 a-e
Description
Wooden case with buffer runners on the front, back, and along the bottom - the hinged lid has a leather handle and is held closed with two small screws. Throughout the exterior are various shipping stickers, usually from CP Rail, “34” is stenciled on all sides, and a wooden name plate with Nicholas…
  1 image  
Title
Camera Case
Date
1971 – 1973
Material
wood; metal; plastic; paper; leather;
Dimensions
30.0 x 36.5 x 40.5 cm
Description
Wooden case with buffer runners on the front, back, and along the bottom - the hinged lid has a leather handle and is held closed with two small screws. Throughout the exterior are various shipping stickers, usually from CP Rail, “34” is stenciled on all sides, and a wooden name plate with Nicholas Morant’s information is nailed to the lid. Morant’s information is also stamped in red ink on the inside of the lid, along with a Linhof sticker.Inside the case is a Linhof Aero Technika camera - a camera used in aerial photography - as well as two bundles of Kodak gelatin filters in plastic bags, a viewfinder attachment housed in a black and yellow cardboard box, two plastic-frame Linhof filter attachments in individual fabric bags housed inside a cigar box, and two short hook links - one metal clasps attached by cord and one open hooks attached with a metal chain. The camera is housed inside a pale grey metal case that leaves the back exposed - the section of housing that extends over the lens can be removed, but has small openings throughout in order to access it - another opening along the top at the very front of the lens housing allows the plastic-framed filter to be slid in. On either side of the camera are large black plastic hand holds - the left side one has an extra leather strap that fits over the back of the hand. Fitted into the left-hand grip is a remote trigger.
Subject
Nicholas Morant
photography
camera equipment
aerial photography
cameras;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0154 a-e
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1970 – 1985
Material
leather; wood; metal; fabric; plastic; glass
Catalogue Number
104.41.0096 a-g
Description
Brown hard-sided travel case with metal caps on the corners, reinforcing along all edges, wooden runners parallel horizontally along the long sides of the case, and hinged lid with three metal clasps - the centre one has a keyhole. The interior of the case is divided into five compartments, the lar…
  1 image  
Title
Camera Equipment Case
Date
1970 – 1985
Material
leather; wood; metal; fabric; plastic; glass
Dimensions
31.0 x 30.2 x 59.5 cm
Description
Brown hard-sided travel case with metal caps on the corners, reinforcing along all edges, wooden runners parallel horizontally along the long sides of the case, and hinged lid with three metal clasps - the centre one has a keyhole. The interior of the case is divided into five compartments, the largest centre one has a false bottom accessed by a leather pull tab. There is a square of padding set into the centre of the lid, three equipment manuals are tucked into the right-hand side and the paper one is stuck. Inside the box is a 19.6x24.0x27.1 cm black box with a brown leather strap attached to the sides, a black leather handle on the lid, and a locking metal clasp on the hinged lid. This box is lined with blue velvet and contains various small pieces of camera equipment. Includes: power cord in a yellow fabric bag, micro screwdrivers in a yellow fabric bag, a metal and wood bracket in a white fabric bag, a “BRAUN” digital flash in a yellow fabric bag, an empty blue fabric bag, four metal Agfa film canisters (empty), assorted spacers and brackets, two keys (one in a paper envelope labelled “CASE KEY” in black ink), and various manuals in a plastic sleeve. Also inside the main case are two hard black lens cases - the larger one has a piece of masking tape on the bottom with “400” written in faded black ink and the smaller one has a piece of masking tape on the lid with “200” written in black ink - a metal and wood handle, a circular black plastic case with a black plastic lens cap inside, and a yellow filter in a clear plastic case. Both lens cases manufactured by “ASAHI OPT CO. JAPAN” as noted on the bottoms.
Subject
Nicholas Morant
photography
camera equipment
Canadian Pacific Railay
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0096 a-g
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1931 – 1942
Material
metal; glass;
Catalogue Number
104.41.0214
Description
Ernst Leitz Wetzlar Hektor f=7,3 cm 1:1,9 lens with hood and lens cap in a metal tube case. The lens cap has Leica engraved on it - the case has the manufacturer name and the lens size stamped on the lid, which slides up off the tube.
  1 image  
Title
Camera Lens
Date
1931 – 1942
Material
metal; glass;
Dimensions
8.6 cm
Description
Ernst Leitz Wetzlar Hektor f=7,3 cm 1:1,9 lens with hood and lens cap in a metal tube case. The lens cap has Leica engraved on it - the case has the manufacturer name and the lens size stamped on the lid, which slides up off the tube.
Subject
camera equipment
photography
photography equipment
camera accessories;
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.41.0214
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1975
Material
leather; metal; glass; fabric; plastic
Catalogue Number
104.41.1281 a-e
Description
a) Asahi lens, black metallic cylinder engraved in white on top ring: “Super-Multi-Coated TAKUMAR / 6x7 1:3.5/55 5415794 / ASAHI OPT. CO., JAPAN”; screw mountedb) black plastic lens cap, textured on the top, labeled with with silver letters in relief encircling the brand logo: “TAKUMAR LENS FOR ASA…
  1 image  
Title
Camera Lens
Date
1975
Material
leather; metal; glass; fabric; plastic
Dimensions
12.5 cm
Description
a) Asahi lens, black metallic cylinder engraved in white on top ring: “Super-Multi-Coated TAKUMAR / 6x7 1:3.5/55 5415794 / ASAHI OPT. CO., JAPAN”; screw mountedb) black plastic lens cap, textured on the top, labeled with with silver letters in relief encircling the brand logo: “TAKUMAR LENS FOR ASAHI PENTAX / ASAHI OPT. CO., LTD.”c) black plastic screw mount cap with a red dot on the side, labeled with letters in relief: “TAKUMAR / ASAHI OPT. CO., JAPAN”d) original black leather cylindrical box, with shoulder strap attached by two eyelets; lid fastened by a press button on a strip; stamped at the top: “TAKUMAR 3.5/55 / FOR ASAHI PENTAX 6X7”; piece of white tape with handwritten “WA” in black in the centre; red velvet inside lininge) black round hard plastic box with ridged and textured lid with embossed label on the bottom: “TAKUMAR / ASAHI OPT. CO. JAPAN”
Subject
Nicholas Morant
photography
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.1281 a-e
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1883 – 1926
Material
cardboard; metal; glass;
Catalogue Number
104.41.0129 a,b
Description
Two camera lenses housed in a repurposed Hammond box with “OLD ‘ADON’ Telephoto in shutter circa 1990’s” written in black ink on the front.The larger lens with shutter was manufactured by Bausch & Lomb Optical Co., originally a company that produced prescription eye-wear in the mid to late-1800s be…
  1 image  
Title
Camera Lenses
Date
1883 – 1926
Material
cardboard; metal; glass;
Dimensions
5.7 x 7.8 x 14.5 cm
Description
Two camera lenses housed in a repurposed Hammond box with “OLD ‘ADON’ Telephoto in shutter circa 1990’s” written in black ink on the front.The larger lens with shutter was manufactured by Bausch & Lomb Optical Co., originally a company that produced prescription eye-wear in the mid to late-1800s before expanding into camera lenses and microscopes/telescopes towards the turn of the century. The company was founded in Rochester NY.The smaller lens was manufactured by Gundlach-Manhattan Optical Co., a merged company between Gundlach Optical Co. and Manhattan Optical Co. that took place in 1902, which produced various kinds of bellows cameras. Both companies were based in Rochester NY prior to merging.
Subject
Nicholas Morant
photography
camera equipment;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0129 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1949
Material
wood; metal; plastic
Catalogue Number
104.41.0100
Description
Wood and metal Thalhammer camera tripod with metal spikes at the end of the legs, brackets at various points along the legs, and camera mount. The tripod is retracted to its shortest setting, but can double in height. Each leg has an adjustable metal bracket with circular knobs on the outside of th…
  1 image  
Title
Camera Tripod
Date
1930 – 1949
Material
wood; metal; plastic
Dimensions
88.8 cm
Description
Wood and metal Thalhammer camera tripod with metal spikes at the end of the legs, brackets at various points along the legs, and camera mount. The tripod is retracted to its shortest setting, but can double in height. Each leg has an adjustable metal bracket with circular knobs on the outside of the leg - the flat part of the knob features a kneeling man holding the handle of a long hammer in front of him, with his hands above his head just below the head of the hammer. This same logo is featured throughout other metal pieces around the head of the tripod. A plastic-handled grip is attached to the top of the tripod. Four circular pieces of paper screwed onto the camera support base, possibly as spacers, upon removal the Thalhammer company information is shown.
Subject
Nicholas Morant
photography
camera equipment
camera tripod;
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0100
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1975 – 1989
Material
plastic; paper
Catalogue Number
104.41.0112
Description
One dark purple and clear yellow plastic box containing five different coloured filters, instruction manual, and a red fabric cloth. The lid is attached to the body of the box with a strip of clear tape.DuPont de Nemours, Inc. developed various chemicals and polymers throughout the 19th and 20th ce…
  1 image  
Title
Colour Filters
Date
1975 – 1989
Material
plastic; paper
Dimensions
8.2 x 5.3 x 7.3 cm
Description
One dark purple and clear yellow plastic box containing five different coloured filters, instruction manual, and a red fabric cloth. The lid is attached to the body of the box with a strip of clear tape.DuPont de Nemours, Inc. developed various chemicals and polymers throughout the 19th and 20th centuries. The box contains “plastic FILTERS for VARIGAM PAPER” used during the development of photographs. Each filter is numbered 1-10, but 5 are missing leaving only 1, 3, 5, 7, and 10.
Subject
Nicholas Morant
photography
photographic development
filters
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0112
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1885 – 1900
Material
metal; skin
Catalogue Number
104.41.1104
Description
Metal box with opening compartments and leather carrying handle marked “45”. “Pat. May 31. 87. Aug. 3. 90” stamped on top. Spring loaded film changing apparatus inside.
  1 image  
Title
Cut-Film Holder
Date
1885 – 1900
Material
metal; skin
Dimensions
4.5 x 11.5 cm
Description
Metal box with opening compartments and leather carrying handle marked “45”. “Pat. May 31. 87. Aug. 3. 90” stamped on top. Spring loaded film changing apparatus inside.
Subject
photography
Vaux family
Credit
Gift of Molly Vaux, New York, USA, 1999
Catalogue Number
104.41.1104
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1950
Material
plastic
Catalogue Number
104.41.1059
Description
Black plastic developing tank; black plastic cylinder with detachable lid; 6 groups of 4 ridges running the height of cylinder; lip surrounding opening at top; "PLANO" printed in relief on lid; 2 oblong holes to correspond to tongues on bottom section; olive colour spool with near spaced thread att…
  1 image  
Title
Developing Tank
Date
1930 – 1950
Material
plastic
Dimensions
12.0 x 12.4 cm
Description
Black plastic developing tank; black plastic cylinder with detachable lid; 6 groups of 4 ridges running the height of cylinder; lip surrounding opening at top; "PLANO" printed in relief on lid; 2 oblong holes to correspond to tongues on bottom section; olive colour spool with near spaced thread attached to lid with finger knob coming through to outside.
Subject
photography
Credit
Gift of Robert N. Smith, Canmore, 1985
Catalogue Number
104.41.1059
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1950
Material
metal
Catalogue Number
104.41.1067
Description
Metal press with handle, electrical cord (220). Three brass hinged mounting plates, 3 sizes.
  1 image  
Title
Dry Mounting Press
Date
prior to 1950
Material
metal
Description
Metal press with handle, electrical cord (220). Three brass hinged mounting plates, 3 sizes.
Subject
photography
Byron Harmon
Credit
Gift of Don Harmon, Banff, 1994
Catalogue Number
104.41.1067
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1970
Material
wood; metal, copper
Catalogue Number
104.43.1005
Description
A rectangle of wood with a metal plate attached. The copper plate has an image on it.This item was transferred to the Archives by SS in May/June 2014.
  1 image  
Title
Engraving Plate
Date
1930 – 1970
Material
wood; metal, copper
Description
A rectangle of wood with a metal plate attached. The copper plate has an image on it.This item was transferred to the Archives by SS in May/June 2014.
Subject
photography
Credit
Gift of Arthur Oliver Wheeler, 1975
Catalogue Number
104.43.1005
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

75 records – page 1 of 4.

Back to Top