Narrow Results By
- Date
- n.d.
- Material
- wood; plastic; metal; fabric
- Catalogue Number
- 104.41.1148 a-c
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using…
1 image
- Title
- Cut-Film Holder
- Date
- n.d.
- Material
- wood; plastic; metal; fabric
- Dimensions
- 1.4 x 14.9 x 22.7 cm
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using a sheet film holder, the device is inserted into the camera, often a view camera, and the dark slide is withdrawn, making the film available for exposure. After the exposure has been made, the dark slide is reinserted into the film holder, and the device is removed from the camera for later processing of the exposed film. Film loading using sheet film holders requires a dark space to load and unload the film; typically a changing bag or darkroom would be utilized to avoid compromising the film. However, 5x7 film holders were known for their primary use in the field, suggesting that a changing bag would have been used. (a)The film holder has been designed with the utmost durability and has a welded unibody construction to withstand normal dropping without damage. The holder consists of a metal handle on the darkslides, which make for easy handling and are considered to be more highly regarded as they are known to have a longer life. On the top of the holder’s body there are two black metal clips, which would have locked each sheet into place. Along the top of the holder, on both the front and back, a protruding inscription reads as follows: “5X7 LISCO CUT FILM HOLDER” “MADE IN U.S.A. BY PATS PENO” “LISCO PRODUCTS CO. GLENDALE 4, CALIF.” (b)At the top of the darkslide nothing has been attached to further identify it. (c)At the top of the darkslide a red, white and blue striped ribbon has been tied
- Subject
- photography
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1148 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- wood; plastic; metal; tape
- Catalogue Number
- 104.41.1149 a-c
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using…
1 image
- Title
- Cut-Film Holder
- Date
- n.d.
- Material
- wood; plastic; metal; tape
- Dimensions
- 1.4 x 14.9 x 22.7 cm
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using a sheet film holder, the device is inserted into the camera, often a view camera, and the dark slide is withdrawn, making the film available for exposure. After the exposure has been made, the dark slide is reinserted into the film holder, and the device is removed from the camera for later processing of the exposed film. Film loading using sheet film holders requires a dark space to load and unload the film; typically a changing bag or darkroom would be utilized to avoid compromising the film. However, 5x7 film holders were known for their primary use in the field, suggesting that a changing bag would have been used. (a)The film holder has been designed with the utmost durability and has a welded unibody construction to withstand normal dropping without damage. The holder consists of a metal handle on the darkslides, which make for easy handling and are considered to be more highly regarded as they are known to have a longer life. On the top of the holder’s body there are two black metal clips, which would have locked each sheet into place. Along the top of the holder, on both the front and back, a protruding inscription reads as follows: “5X7 LISCO CUT FILM HOLDER” “MADE IN U.S.A. BY PATS PENO” “LISCO PRODUCTS CO. GLENDALE 4, CALIF.” (b)At the top of the darkslide nothing has been attached to further identify it. (c)At the top of the darkslide a piece of tape has been attached to one of the sheets.
- Subject
- photography
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1149 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- wood; plastic; metal; paper; adhesive
- Catalogue Number
- 104.41.1150 a-c
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using…
1 image
- Title
- Cut-Film Holder
- Date
- n.d.
- Material
- wood; plastic; metal; paper; adhesive
- Dimensions
- 1.4 x 14.9 x 22.7 cm
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using a sheet film holder, the device is inserted into the camera, often a view camera, and the dark slide is withdrawn, making the film available for exposure. After the exposure has been made, the dark slide is reinserted into the film holder, and the device is removed from the camera for later processing of the exposed film. Film loading using sheet film holders requires a dark space to load and unload the film; typically a changing bag or darkroom would be utilized to avoid compromising the film. However, 5x7 film holders were known for their primary use in the field, suggesting that a changing bag would have been used. (a)The film holder has been designed with the utmost durability and has a welded unibody construction to withstand normal dropping without damage. The holder consists of a metal handle on the darkslides, which make for easy handling and are considered to be more highly regarded as they are known to have a longer life. On the top of the holder’s body there are two black metal clips, which would have locked each sheet into place. Along the top of the holder, on both the front and back, a protruding inscription reads as follows: “5X7 LISCO CUT FILM HOLDER” “MADE IN U.S.A. BY PATS PENO” “LISCO PRODUCTS CO. GLENDALE 4, CALIF.” (b)At the top of the darkslide nothing has been attached to further identify it. (c)At the top of the darkslide a piece of paper has been attached and adhered and “BW” has been written with marker.
- Subject
- photography
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1150 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- wood; plastic; metal; paper; adhesive
- Catalogue Number
- 104.41.1151 a-c
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using…
1 image
- Title
- Cut-Film Holder
- Date
- n.d.
- Material
- wood; plastic; metal; paper; adhesive
- Dimensions
- 1.4 x 14.9 x 22.7 cm
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using a sheet film holder, the device is inserted into the camera, often a view camera, and the dark slide is withdrawn, making the film available for exposure. After the exposure has been made, the dark slide is reinserted into the film holder, and the device is removed from the camera for later processing of the exposed film. Film loading using sheet film holders requires a dark space to load and unload the film; typically a changing bag or darkroom would be utilized to avoid compromising the film. However, 5x7 film holders were known for their primary use in the field, suggesting that a changing bag would have been used. (a)The film holder has been designed with the utmost durability and has a welded unibody construction to withstand normal dropping without damage. The holder consists of a metal handle on the darkslides, which make for easy handling and are considered to be more highly regarded as they are known to have a longer life. On the top of the holder’s body there are two black metal clips, which would have locked each sheet into place.Along the top of the holder, on both the front and back, a protruding inscription reads as follows: “5X7 LISCO CUT FILM HOLDER” “MADE IN U.S.A. BY PATS PENO” “LISCO PRODUCTS CO. GLENDALE 4, CALIF.” (b)At the top of the darkslide nothing has been attached to further identify it. (c)At the top of the darkslide a piece of paper has been attached and adhered. On the paper “BW 1980” has been written in marker.
- Subject
- photography
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1151 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- wood; plastic; metal; paper; adhesive
- Catalogue Number
- 104.41.1152 a-c
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using…
1 image
- Title
- Cut-Film Holder
- Date
- n.d.
- Material
- wood; plastic; metal; paper; adhesive
- Dimensions
- 1.4 x 14.9 x 22.7 cm
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using a sheet film holder, the device is inserted into the camera, often a view camera, and the dark slide is withdrawn, making the film available for exposure. After the exposure has been made, the dark slide is reinserted into the film holder, and the device is removed from the camera for later processing of the exposed film. Film loading using sheet film holders requires a dark space to load and unload the film; typically a changing bag or darkroom would be utilized to avoid compromising the film. However, 5x7 film holders were known for their primary use in the field, suggesting that a changing bag would have been used. (a)The film holder has been designed with the utmost durability and has a welded unibody construction to withstand normal dropping without damage. The holder consists of a metal handle on the darkslides, which make for easy handling and are considered to be more highly regarded as they are known to have a longer life. On the top of the holder’s body there are two black metal clips, which would have locked each sheet into place. Along the top of the holder, on both the front and back, a protruding inscription reads as follows: “5X7 LISCO CUT FILM HOLDER” “MADE IN U.S.A. BY PATS PENO” “LISCO PRODUCTS CO. GLENDALE 4, CALIF.” (b)At the top of the darkslide nothing has been attached to further identify it. (c)At the top of the darkslide a piece of paper has been attached and adhered. On the paper “BW ‘80.” has been written in marker.
- Subject
- photography
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1152 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Darkroom Thermometer
https://archives.whyte.org/en/permalink/artifact104.41.1162
- Date
- n.d.
- Material
- glass; mercury; metal; fibre
- Catalogue Number
- 104.41.1162
- Description
- A transparent glass Cherry Vale darkroom thermometer without case. The thermometer measures 16.0 cm (length) x 1.5 cm (width) and features scale readings in black writing on a white background. The scale on the viewer left side of the thermometer is measured in Fahrenheit and shows values from -20 …
1 image
- Title
- Darkroom Thermometer
- Date
- n.d.
- Material
- glass; mercury; metal; fibre
- Dimensions
- 0.5 x 1.2 x 16.2 cm
- Description
- A transparent glass Cherry Vale darkroom thermometer without case. The thermometer measures 16.0 cm (length) x 1.5 cm (width) and features scale readings in black writing on a white background. The scale on the viewer left side of the thermometer is measured in Fahrenheit and shows values from -20 to 120°F in 10° increments; the viewer right side of the thermometer is measured in Celsius and shows values from -30 to 50°C in 10° increments. A large arrow is present indicating the 68°F is the ideal temperature for use in a darkroom setting. The rear of the thermometer features (in black) the Cherry Vale company logo followed by a series of information that reads: “CHERRY VALE,” “ACCURATE DARKROOM THERMOMETER” on a white background.
- Subject
- photography
- darkroom
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1162
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Darkroom Thermometer
https://archives.whyte.org/en/permalink/artifact104.41.1163
- Date
- n.d.
- Material
- glass; mercury; metal; fibre
- Catalogue Number
- 104.41.1163
- Description
- Kodak darkroom thermometer without case. The scale only indicates Fahrenheit readings. A star is present indicating that 68°F is the ideal temperature for use in a darkroom setting. On the rear of the thermometer a series of manufacturer information is present: ”TRADE MARK REG. U.S. PAT. OFF.” ”KOD…
1 image
- Title
- Darkroom Thermometer
- Date
- n.d.
- Material
- glass; mercury; metal; fibre
- Dimensions
- 0.3 x 1.1 x 14.5 cm
- Description
- Kodak darkroom thermometer without case. The scale only indicates Fahrenheit readings. A star is present indicating that 68°F is the ideal temperature for use in a darkroom setting. On the rear of the thermometer a series of manufacturer information is present: ”TRADE MARK REG. U.S. PAT. OFF.” ”KODAK DARKROOM THERMOMETER” and “MADE IN U.S.A. FOR EASTMAN KODAK COMPANY ROCHESTER, N.Y.”
- Subject
- photography
- darkroom
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1163
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Darkroom Thermometer
https://archives.whyte.org/en/permalink/artifact104.41.1164%20a-c
- Date
- n.d.
- Material
- metal; glass; mercury; paper
- Catalogue Number
- 104.41.1164 a-c
- Description
- (a) A stainless steel metal darkroom thermometer with case. The thermometer measures only Fahrenheit with scale readings in black. The scale shows values from 20 to 120°F in 20° increments. A star and arrow is present indicating the 68°F mark, which is the ideal temperature for use in a darkroom se…
1 image
- Title
- Darkroom Thermometer
- Date
- n.d.
- Material
- metal; glass; mercury; paper
- Dimensions
- (a) 0.3; (b) 1.8; (c) 2.1 x (a) 3.5; (b) 3.5; (c) 2.8 x (a) 11.9; (b) 13.0; (c) 12.5 cm
- Description
- (a) A stainless steel metal darkroom thermometer with case. The thermometer measures only Fahrenheit with scale readings in black. The scale shows values from 20 to 120°F in 20° increments. A star and arrow is present indicating the 68°F mark, which is the ideal temperature for use in a darkroom setting. The bottom of the thermometer reads “STAINLESS STEEL” “JAPAN.”At the top there is a hook that would have allowed the thermometer to be hung from the developing tray to ensure an accurate reading before immersing negatives. (b) The object also has been safeguarded in a box. The lid of the box has a Canadian Pacific sticker adhered. Written in pink pen ink is “Read about 1° low.” The box has been fastened together using staples. (c) The bottom of the box does not contain any information. Once again there are staples present highlighting how it would have been constructed. Made in Japan.
- Subject
- photography
- darkroom
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1164 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Darkroom Thermometer
https://archives.whyte.org/en/permalink/artifact104.41.1165%20
- Date
- n.d.
- Material
- metal; glass; mercury
- Catalogue Number
- 104.41.1165
- Description
- Kodak darkroom thermometer with case. The scale only indicates Fahrenheit readings beginning at 30°F and going up to 100°F increasing in 10° increments. A star and arrow is present indicating the 68°F is the ideal temperature for use in a darkroom setting. At the top of the thermometer ”EASTMAN KOD…
1 image
- Title
- Darkroom Thermometer
- Date
- n.d.
- Material
- metal; glass; mercury
- Dimensions
- 0.4 x 3.0 x 12.5 cm
- Description
- Kodak darkroom thermometer with case. The scale only indicates Fahrenheit readings beginning at 30°F and going up to 100°F increasing in 10° increments. A star and arrow is present indicating the 68°F is the ideal temperature for use in a darkroom setting. At the top of the thermometer ”EASTMAN KODAK CO.” has been imprinted; below “MADE IN U.S.A.” A clip is present on the back which would have allowed the thermometer to be hung from the developing tray to ensure an accurate reading before immersing negatives.
- Subject
- photography
- darkroom
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1165
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Decoupage Picture
https://archives.whyte.org/en/permalink/artifact107.01.1023
- Date
- n.d.
- Material
- wood; paint; metal
- Catalogue Number
- 107.01.1023
- Description
- A wood picture (all one piece of wood) with a gold frame of a train engine and one car (for loading) on a track. The train and car are blue with red, gold and grey; the background is a muted beige with dark brown flecks. The picture is decoupaged onto the wood. Au verso there is a hook for hanging …
1 image
- Title
- Decoupage Picture
- Date
- n.d.
- Material
- wood; paint; metal
- Dimensions
- 15.0 x 20.0 cm
- Description
- A wood picture (all one piece of wood) with a gold frame of a train engine and one car (for loading) on a track. The train and car are blue with red, gold and grey; the background is a muted beige with dark brown flecks. The picture is decoupaged onto the wood. Au verso there is a hook for hanging and stamped upside down “MADE IN ITALY”.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 107.01.1023
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.