Skip header and navigation

Narrow Results By

74 records – page 1 of 8.

Date
1965 – 1970
Material
plastic; leaf; metal
Catalogue Number
105.06.0040
Description
Rectangular, translucent plastic bookmark with pinked edges, leaves, gold glitter have been placed between two sheets of plastic and heat bonded.
  1 image  
Title
Bookmark
Date
1965 – 1970
Material
plastic; leaf; metal
Dimensions
5.5 x 14.3 cm
Description
Rectangular, translucent plastic bookmark with pinked edges, leaves, gold glitter have been placed between two sheets of plastic and heat bonded.
Subject
households
office
hobbies
pastime
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
105.06.0040
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960 – 1970
Material
fibre
Catalogue Number
105.06.0041
Description
Long, narrow, multi coloured, hand woven bookmark with fringes at either end. Dominant yellow green chevron design in weave, red black accents.
  1 image  
Title
Bookmark
Date
1960 – 1970
Material
fibre
Dimensions
4.5 x 39.0 cm
Description
Long, narrow, multi coloured, hand woven bookmark with fringes at either end. Dominant yellow green chevron design in weave, red black accents.
Subject
households
office
hobbies
pastime
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
105.06.0041
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1820 – 1850
Material
paper; paint; glue; fibre
Catalogue Number
110.01.1044 a,b
Description
Hand made paper box with cover. Is oblong with rounded edges decorated in green and white leaf pattern, blue, black and white trim on the inside."Belonged to Dr. Schaffer's mother" hand written on bottom of box.
Title
Box
Date
1820 – 1850
Material
paper; paint; glue; fibre
Dimensions
9.7 x 20.7 cm
Description
Hand made paper box with cover. Is oblong with rounded edges decorated in green and white leaf pattern, blue, black and white trim on the inside."Belonged to Dr. Schaffer's mother" hand written on bottom of box.
Subject
households
hobbies
needlework
sewing
Mary Schaffer Warren
Credit
Gift of Charles C. Reid, Banff, Alberta, 1986
Catalogue Number
110.01.1044 a,b
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1820 – 1850
Material
paper
Catalogue Number
110.01.1045 a-c
Description
A small white oval shaped paper box with blue trim. There is sticker on label from a hotel in Europe. Inside small piece lace, 10.7x4.3 cm. Inside lid, on bottom written "B E .... trim from Mary E. Fowler Oct 5, 1875" "Made by S.M. Potts" probably refers to the lace.
Title
Box
Date
1820 – 1850
Material
paper
Dimensions
4.0 x 5.5 cm
Description
A small white oval shaped paper box with blue trim. There is sticker on label from a hotel in Europe. Inside small piece lace, 10.7x4.3 cm. Inside lid, on bottom written "B E .... trim from Mary E. Fowler Oct 5, 1875" "Made by S.M. Potts" probably refers to the lace.
Subject
households
hobbies
needlework
sewing
Mary Schaffer Warren
S. M. Potts
Mary E. Fowler
Credit
Gift of Charles C. Reid, Banff, Alberta, 1986
Catalogue Number
110.01.1045 a-c
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1938
Material
metal; glass; paper
Catalogue Number
104.41.1113 a,b
Description
A simple black box camera with black, simulated textured leather. It also has an adhesive-taped, original box. The inverted aperture in the front has a black metal retention ring surrounding it. Below this “Agfa” is imprinted on the camera, surrounded by a diamond-shaped box. There is a black metal…
  1 image  
Title
Box Camera
Date
1938
Material
metal; glass; paper
Dimensions
8.5 x 6.5 cm
Description
A simple black box camera with black, simulated textured leather. It also has an adhesive-taped, original box. The inverted aperture in the front has a black metal retention ring surrounding it. Below this “Agfa” is imprinted on the camera, surrounded by a diamond-shaped box. There is a black metal rim which overlaps the edges on the front of the camera; on both sides there is a slight extension, .03 x.05 wide, 2.0cm from the top, with a hole in the metal. This fits over two small metal knobs on each side of the camera body. It appears that pushing the knobs in and pulling, would release the front part of the camera from the body. On the viewer’s left is the metal shutter release; a small metal lever that can be pulled down to release the shutter and expose the lens from inside the body. On the same side is the metal film winder, 3.0cm from the front and .50cm from the top; this is a flat piece of metal 2.0cm in diameter, with arrows indicating the direction to turn (clockwise arrows), a round raised metal tab, onto which is screwed a piece of metal (2.5cmx1.0cm wide in the middle) to wind the film. It can also be pulled out to release the metal film chamber. The metal is turned down on the side of each end so the fingers can grasp it for turning. A metal folding viewfinder is .50cm from the back and 2.7cm from top and bottom; a flat piece of metal 3.0cm sq., folded at the sides, is rivetted onto the body. Two flat metal pieces are attached at each end, one on a spring to fold down; this piece is 2.4x2.7cm wide with a window cut out .50x1.0cm wide. The other piece is 2.7cm sq. with a window of 1.5x2.4cm wide; the cutout has a piece of metal raised from the bottom of the window. The cutout is for perspective when you look through the viewfinder, vertically or horizontally. This piece of metal folds down to become the top, effectively making the viewfinder flat when not in use. There is a hinged door on the back of the camera and a cut-out metal latch on the door that connects to a small metal knob 1.0cm from the edge of the body. There is a red circle film window (1.0cm diagonally) which lets you read the frame number on the film. On the inside of the door are two rivets that connect the hinge. Above that and below the red circle, is a white painted circle with “USE AB” printed in black, overlapping a painted orange, blue, white, and yellow Agfa Plenachrome film box. The red viewfinder is 4.0cm from the base. A metal film chamber, with two metal rollers on each end for winding the film on, fits inside the camera. It can be released by pulling out the film winder. The canister is 7.0x5.0 wide, is open at one end, hollow in the centre, sloping upwards with a circular hole at the other end to let light in. There are two sprockets sitting on two cutouts on top of the canister and two on the bottom, onto which the film is winded. There are two rivets attaching two Y-shaped metal pieces, on either end that guide and let the film move and roll. The top of the camera has two metal knobs 1.5cm crosswise from each end, where a leather strap with a hole on either end, .07cm from the edge, fits in to make a diagonal strap/handle for carrying. The strap is imprinted with “A-8 CADET”. There is a small metal pull-up tab, 1.0cm from the edge of the front of the camera, that lets you time the shutter speed.
Subject
households
photography
hobbies
Bob Louden
Credit
Gift of Bob Louden, Calgary, 2004
Catalogue Number
104.41.1113 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960 – 1980
Material
wood; metal; paint
Catalogue Number
107.02.1032
Description
Wide rectangular frame with painted leaves and flowers on a burnt and textured background. There is a metal hanging wire attached to the back of the frame.
Title
Burnt Wood Frame
Date
1960 – 1980
Material
wood; metal; paint
Description
Wide rectangular frame with painted leaves and flowers on a burnt and textured background. There is a metal hanging wire attached to the back of the frame.
Subject
households
hobbies
crafts
carving
Credit
Gift of Ken Campbell, Qualicum Beach, 1987
Catalogue Number
107.02.1032
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960 – 1980
Material
wood
Catalogue Number
107.02.1031 a-d
Description
Four pieces of wood decorated by burning.a) Round decorative frame with a woman’s profile and shoulders.b) Rectangular piece of wood with a woman wearing a green cape on a blond horse.c) Oval decorative frame with a black and white reproduction photograph of the boathouse on the Bow River.d) Oval d…
  1 image  
Title
Burnt Wood Picture
Date
1960 – 1980
Material
wood
Description
Four pieces of wood decorated by burning.a) Round decorative frame with a woman’s profile and shoulders.b) Rectangular piece of wood with a woman wearing a green cape on a blond horse.c) Oval decorative frame with a black and white reproduction photograph of the boathouse on the Bow River.d) Oval decorated with holly leaves and berries on a textured background.
Subject
households
hobbies
crafts
woodworking
carving
Credit
Gift of Ken Campbell, Qualicum Beach, 1987
Catalogue Number
107.02.1031 a-d
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1970
Material
metal
Catalogue Number
104.41.1071
Description
Black metal camera tripod, legs extend in six sections to a length of 112.5 cm. Points on ends screw off.
  1 image  
Title
Camera Tripod
Date
prior to 1970
Material
metal
Dimensions
25.7 cm
Description
Black metal camera tripod, legs extend in six sections to a length of 112.5 cm. Points on ends screw off.
Subject
hobbies
photography
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.41.1071
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1986
Material
metal
Catalogue Number
104.49.1011
Description
One piece cast metal gouge. 5.5 cm long 'spoon' tapers from 2.5 to a point. Handle is solid, probably was inserted into a wood handle.
  1 image  
Title
Carving Gouge
Date
prior to 1986
Material
metal
Dimensions
2.5 x 26.2 cm
Description
One piece cast metal gouge. 5.5 cm long 'spoon' tapers from 2.5 to a point. Handle is solid, probably was inserted into a wood handle.
Subject
hobbies
woodworking
Lawrence Grassi
Credit
Gift of Patricia Farrand, Canmore, 1986
Catalogue Number
104.49.1011
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Collection Clay Concretion

https://archives.whyte.org/en/permalink/artifact112.03.1025
Date
prior to 1971
Material
clay
Catalogue Number
112.03.1025
Description
Various sizes and interesting shapes of clay concretions.
  1 image  
Title
Collection Clay Concretion
Date
prior to 1971
Material
clay
Description
Various sizes and interesting shapes of clay concretions.
Subject
geological
hobbies
Credit
Gift of anonymous, 1971
Catalogue Number
112.03.1025
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

74 records – page 1 of 8.

Back to Top