Narrow Results By
- Date
- prior to 1975
- Material
- leather; wood; metal; plastic; paper
- Catalogue Number
- 104.41.0253 a-e
- Description
- A black hardshell leather camera case with gold detailing with two cut-film holders/double dark slides, a wollensak lens, and Kodak informational sheets. a) A black hardshell leather camera case with gold detailing, including three clasps with one missing the hinge and a large one in the middle wit…
1 image
- Title
- Camera Case
- Date
- prior to 1975
- Material
- leather; wood; metal; plastic; paper
- Dimensions
- 24.8 x 34.2 x 15.6 cm
- Description
- A black hardshell leather camera case with gold detailing with two cut-film holders/double dark slides, a wollensak lens, and Kodak informational sheets. a) A black hardshell leather camera case with gold detailing, including three clasps with one missing the hinge and a large one in the middle with a spot for a key to lock it. Each corner of the case features gold detailing. There is a black handle on top attached via rings. Along the shorter side are two rings, presumably to attach a longer carrying strap for the case. The interior of the case is covered in dark green velvet, with two compartments in the main body - one slightly smaller than the other, and multiple compartments in the top with coverings held by button clasps. The left side compartment is a single square and the right side has three compartments - two small squares stacked and a rectangle that features a cut-out in the covering to reveal a strip of the compartment. In the bottom of the case is a short cord photography accessory and a bent metal track for a camera(?)b & c) Two identical cut-film holders/double dark slides. They are all black film holders. The slide handles are thin metal rods in the middle of the holder. One side along the edges of the frame features stamped text which reads “3 1/4 x 4 1/4 GRAFLEX FILM S. PAT 2056144” “MADE IN U.S.A. BY GRAFLEX INC ROCHESTER, N.J.” On b) there are two stickers, one on each side, with handwriting one reads “3” and the other “B 1 W 64”. On c) there are two stickers, one on each side, with handwriting reads “5” and “B 6 W 64”. 15.4 x 10.1 x 1.3 cm d) A Wollensak 65mm Raptar Wide angle lens mounted on a black painted board. The board is square with the front having a raised layer of board and an “A” stamped into one of the corners. The inscription on the inner part of the lens reads “WOLLENSAK 65MM f/6.8 CW RAPTAR WIDE ANGLE No A553800” and aperture ring with “22” “16” “11” “8” “6.8” “f”. It comes with an orange rubber cap that reads “WOLLENSAK”. 2.8 x 7.9 x 7.9 cm [inside the top part of the lid on the left side] e) Two sheets of information sheets. A smaller one for “KODAK EKTACHROME FILM, Daylight Type” with information about emulsion number, speed, electronic flash, and colour balance. [13.3 x 11.8 cm] The larger folded sheet is for “KODAK PANATOMIC-X SHEET FILM” with information about exposure and development. One side is in english and the other in french. [26.7 x 23.8 cm] e)
- Credit
- Gift of Don Harmon, Banff, 1985
- Catalogue Number
- 104.41.0253 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- wood; metal; glass; felt
- Catalogue Number
- 104.41.0268 a,b
- Description
- A set of two wooden contact printing frames. a) The frame is wooden all the way around with two metal handles on the short side and long side, with black strips of metal that wrap around the handle and are inside the frame, which can be moved. On the back of the frame is an insert back that is hing…
1 image
- Title
- Contact Frame
- Date
- prior to 1977
- Material
- wood; metal; glass; felt
- Dimensions
- 21.5 x 16.5 x 2.0 cm
- Description
- A set of two wooden contact printing frames. a) The frame is wooden all the way around with two metal handles on the short side and long side, with black strips of metal that wrap around the handle and are inside the frame, which can be moved. On the back of the frame is an insert back that is hinged off center. There is grey felt on the internal side facing the glass plate, where the two strips of black metal are visible alongside two other strips of black metal in the corner of one side fixed in an L shape, each strip has a small piece of measuring tape(?). Back held in by metal clips which slide under a lip provided in frame. On the back of the frame is stamped text that reads “KODAK AUTO. MASK PRINTING FRAME” “FOR NEGATIVES” “4 X 5 3 1/4 X 5 1/2 AND SMALLER” “MADE IN U.S.A. BY” “EASTMAN KODAK CO.” “ROCHESTER, N.Y.” “T.M. REG. U.S. PAT. OFF.” There is a silver sticker with writing, “SOLE IMPORTER INTO CANADA” “CANADIAN” “KODAK CO., LIMITED” “TORONTO”. b) A wooden contact printing frame: wood frame with insert back that is hinged off center. There is white felt on the internal side facing the glass plate. Back held in by metal clips which slide under a lip provided in frame. Stamped on the back in black text which reads “EASTMAN PRINTING FRAME” “FOR 5 X 7 NEGATIVES” “EASTMAN KODAK CO., ROCHESTER, N.Y. MADE IN U.S.A.” On both long sides of the frame, back and front, are black foam strips. 20.1 x 15.2 x 2.8 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0268 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Developer Tongs
https://archives.whyte.org/en/permalink/artifact104.41.0227%20
- Date
- prior to 1980
- Material
- wood;
- Catalogue Number
- 104.41.0227
- Description
- Wooden printing tongs. Two pieces of flat wood slotted into a solid wood cylinder with enough give in the wood to allow the end of the tongs to touch. On one side of the tongs black text is printed, it reads “DEVELOPER — REXO PRINT TONGS” and a small logo for Burke & James Photo Supplies.
1 image
- Title
- Developer Tongs
- Date
- prior to 1980
- Material
- wood;
- Dimensions
- 1.6 x 2.1 x 24.3 cm
- Description
- Wooden printing tongs. Two pieces of flat wood slotted into a solid wood cylinder with enough give in the wood to allow the end of the tongs to touch. On one side of the tongs black text is printed, it reads “DEVELOPER — REXO PRINT TONGS” and a small logo for Burke & James Photo Supplies.
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0227
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- metal; paper; cardboard; film
- Catalogue Number
- 104.41.0267 a-c
- Description
- A metal 16mm film developing reel inside a bright red box with an instruction sheet. a) A series of two metal rings with enough space between them for a 16mm film roll attached together with four metal hinges. One ring features a lip along the outer edge, and the other ring features a metal spiral …
1 image
- Title
- Developing Reel
- Date
- prior to 1977
- Material
- metal; paper; cardboard; film
- Dimensions
- 2.1 cm
- Description
- A metal 16mm film developing reel inside a bright red box with an instruction sheet. a) A series of two metal rings with enough space between them for a 16mm film roll attached together with four metal hinges. One ring features a lip along the outer edge, and the other ring features a metal spiral that starts at the center and curls outward. The center of the rings is a gap for a roll of 16mm film, which is filled with a loose roll of 16mm film with a metal bar to keep it in place. b) A bright red box with simple labels on two opposite sides of the lid. The label reads “NIKOR” “FILM DEVELOPING REEL” “FOR 16 MM” “NIKOR PRODUCTS COMPANY” “WEST SPRINGFIELD, MASS. U.S.A.” On one side of the lid and on a corner of the bottom of the box is handwritten number “645”. 2.4 x 9.5 x 9.5 cm. c) A piece of paper with instructions for the developing reel, written with a typewriter, folded in half twice. 15.8 x 17.7 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0267 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Developing Powder Box
https://archives.whyte.org/en/permalink/artifact104.41.0262
- Date
- prior to 1977
- Material
- paper;
- Catalogue Number
- 104.41.0262
- Description
- An empty, blue and yellow developing powder box. The label is blue with yellow text, in a long oval shaped C encompasses text that reads “DEVELOPING ELERITAS POWDERS”, in the back of the C is blue text that reads “TRADEMAEK REG. U.S. PAT. OFF.”. Two sides of the box are identical with text that rea…
1 image
- Title
- Developing Powder Box
- Date
- prior to 1977
- Material
- paper;
- Dimensions
- 3.5 x 9.0 x 5.6 cm
- Description
- An empty, blue and yellow developing powder box. The label is blue with yellow text, in a long oval shaped C encompasses text that reads “DEVELOPING ELERITAS POWDERS”, in the back of the C is blue text that reads “TRADEMAEK REG. U.S. PAT. OFF.”. Two sides of the box are identical with text that reads “PRICE PER PACKAGE - 25 CTS.” “MANUFACTURED ONLY BY” “CHAS. L. MITCHELL, M.D.” “PHOTOGRAPHIC CHEMIST” “1016-1018 CHERRY ST., PHILADELPHIA” behind the text is a faded red circular star with “25 C (cents)”. The side opposite from the label features a blue outline of a badge with text that reads “MITCHELL’S DEVELOPERS ARE GOOD DEVELOPERS”, behind the text is a faded red circular star with some symbols inside it.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0262
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- plastic;
- Catalogue Number
- 104.41.0261 a,b
- Description
- A set of two developing trays, one a discoloured cream and the other black. a) A shallow, rectangular, discoloured cream developing tray with “kodak” in the bottom of the tray surrounded by two stripes - above and below. b) A shallow, square, black developing tray with a circle with “EKC” stamped o…
1 image
- Title
- Developing Tray
- Date
- prior to 1977
- Material
- plastic;
- Dimensions
- 2.4 x 22.0 x 15.6 cm
- Description
- A set of two developing trays, one a discoloured cream and the other black. a) A shallow, rectangular, discoloured cream developing tray with “kodak” in the bottom of the tray surrounded by two stripes - above and below. b) A shallow, square, black developing tray with a circle with “EKC” stamped on the bottom of the exterior. 3.7 x 14.5 x 17.3 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0261 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Dry Plates Box
https://archives.whyte.org/en/permalink/artifact104.41.0263
- Date
- prior to 1977
- Material
- paper
- Catalogue Number
- 104.41.0263
- Description
- A blue, empty Cramer’s Photo Dry Plates box. The label of the box is a lighter blue, with a dark blue border around the edges. The black text reads “CRAMER’S” “Photo Dry Plates.” “DIRECTIONS INSIDE.” “MANUFACTURED BY” “G. Cramer Dry Plate Co.,” “St. Louis, Mo., U.S.A.” “NEW YORK DEPOT: 93 Universit…
1 image
- Title
- Dry Plates Box
- Date
- prior to 1977
- Material
- paper
- Dimensions
- 2.8 x 11.0 x 13.8 cm
- Description
- A blue, empty Cramer’s Photo Dry Plates box. The label of the box is a lighter blue, with a dark blue border around the edges. The black text reads “CRAMER’S” “Photo Dry Plates.” “DIRECTIONS INSIDE.” “MANUFACTURED BY” “G. Cramer Dry Plate Co.,” “St. Louis, Mo., U.S.A.” “NEW YORK DEPOT: 93 University Place.” “Keep in a Dry, Dimly Lighted Place.” “Open in Dark Room Only.” At the top of the lid is handwriting in pencil, “Box No. 3 finished”. Along one edge is another blue label, an anchor illustration “ANCHOR Brand.” “CRAMER PLATES.” “Emulsion 18544” “ONE DOZ. 4 x 5”. There is a brown tape along the edge of the lid. The bottom of the box is stamped with “185445 A10” “THIS” “TRADE-MARK” “REGISTERED IN Anchor” “U.S. PAT. OFFICE.” The inside of the box is a golden yellow. Along the edges of the bottom of the box, is a gingham printed tape.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0263
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Dry Plates Box
https://archives.whyte.org/en/permalink/artifact104.41.0271
- Date
- prior to 1977
- Material
- cardboard;
- Catalogue Number
- 104.41.0271
- Description
- An empty Eastman’s Dry Plate box with a label on the lid. Along the edge of the lid is a red border, in a beige square with a smaller black square text reads “Eastman’s” “Dry Plates” “MANUFACTURED BY” “EASTMAN KODAK CO.,” “ROCHESTER, N.Y.” “TO BE OPENED ONLY IN PHOTOGRAPHIC DARK ROOM.” There is pen…
1 image
- Title
- Dry Plates Box
- Date
- prior to 1977
- Material
- cardboard;
- Dimensions
- 2.9 x 13.8 x 11.3 cm
- Description
- An empty Eastman’s Dry Plate box with a label on the lid. Along the edge of the lid is a red border, in a beige square with a smaller black square text reads “Eastman’s” “Dry Plates” “MANUFACTURED BY” “EASTMAN KODAK CO.,” “ROCHESTER, N.Y.” “TO BE OPENED ONLY IN PHOTOGRAPHIC DARK ROOM.” There is pencil handwriting along the top of the label which reads “Lila Aunt Lizzie”. Along one of the edges of the lid a sticker/label that is partially torn making it illegible. Inside the lid is another box with a white sticker label that reads “Emulsion No. 5599” “Packer No. 13” “If these plates are found to be defective, the user will confer a favor by returning them direct to the manufacturer in this box, together with a negative, and his name, address, and a statement of the trouble written hereon” “EASTMAN KODAK CO.,” “Rochester, N.Y., U.S.A.” “KODAK, LIMITED” “43 Clerkenwell Road, London.” “Paris. Berlin. Brussels. Vienna. St. Petersburg. Moscow. Liverpool. Glasgow. Melbourne.” There is some pencil markings as well. The edges are held with tape. The inside of this box is golden yellow.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0271
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- wood; metal
- Catalogue Number
- 104.41.0274
- Description
- A simple wooden folding stand for prints. The stand is made of two sections fasten together with screws with enough room to fold open, the frames are made in square horseshoe shapes, with the smaller one in the inside. On opposite sides at the top of the sections is ribbing, when folded open. The l…
1 image
- Title
- Folding Stand
- Date
- prior to 1977
- Material
- wood; metal
- Dimensions
- 17.7 x 17.8 cm
- Description
- A simple wooden folding stand for prints. The stand is made of two sections fasten together with screws with enough room to fold open, the frames are made in square horseshoe shapes, with the smaller one in the inside. On opposite sides at the top of the sections is ribbing, when folded open. The legs of the stand are angled at the bottom.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0274
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1980
- Material
- plastic; metal; paper
- Catalogue Number
- 104.41.0223
- Description
- A black plastic 35mm film loader with orange knobs and cranks. It is tear dropped shaped. On one side of the loader is an orange crank and on the other side is multiple parts. There is an orange knob that turns, an orange latch that twists back and forward to lock the bottom of the film loader in p…
1 image
- Title
- Loader Film
- Date
- prior to 1980
- Material
- plastic; metal; paper
- Dimensions
- 11.1 x 8.1 x 17.6 cm
- Description
- A black plastic 35mm film loader with orange knobs and cranks. It is tear dropped shaped. On one side of the loader is an orange crank and on the other side is multiple parts. There is an orange knob that turns, an orange latch that twists back and forward to lock the bottom of the film loader in place, an orange knob with numbers from 0 to 35 (in increments of 5), cut into the side is a window to a dial with white numbers on black text, there is a larger orange knob which twists that features orange text reads “OPEN ONLY TO REPLACE BULK FILM”, and and another black flat circle that twists with black text that reads “TO INSERT CASSETTE”, two solid triangles pointed up, and “TO LOAD FILM”. On the bottom of the where the film canister is loaded is a box with text inside, it reads “COMPUTROL 35 mm film loader RESTEM Ltd. T.A. Made in Israel”. There is an instruction manual with the film loader which features lots of text, sketches of the loader, and diagrams of use.
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0223
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.