Narrow Results By
Bore Hole Cleaner Spoon
https://archives.whyte.org/en/permalink/artifact104.31.1003
- Date
- 1930 – 1950
- Material
- metal
- Catalogue Number
- 104.31.1003
- Description
- Iron rod scraper with dish shaped spoon, iron rod has a 5.5 diameter loop as a handle, other end has been hammered to the shape of a spoon 2.8 wide , for cleaning debris out of a hole drilled for dynamite.
1 image
- Title
- Bore Hole Cleaner Spoon
- Date
- 1930 – 1950
- Material
- metal
- Dimensions
- 79.5 cm
- Description
- Iron rod scraper with dish shaped spoon, iron rod has a 5.5 diameter loop as a handle, other end has been hammered to the shape of a spoon 2.8 wide , for cleaning debris out of a hole drilled for dynamite.
- Subject
- industry
- mining
- Natalco
- National Talc Co.
- Credit
- Gift of Bob Hawes, 1972
- Catalogue Number
- 104.31.1003
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1915 – 1920
- Material
- metal
- Catalogue Number
- 102.05.0062
- Description
- A round brass cylinder carbide fuel container with a screw cap surmounted by a short-necked cylinder at right angles to the base which seems to be a "gas chamber." The upper cylinder has at its front end a dish reflector out of the centre of which protrudes a jet, and out of which also protrudes a …
1 image
- Title
- Carbide Lamp
- Date
- 1915 – 1920
- Material
- metal
- Dimensions
- 10.2 x 7.2 x 8.3 cm
- Description
- A round brass cylinder carbide fuel container with a screw cap surmounted by a short-necked cylinder at right angles to the base which seems to be a "gas chamber." The upper cylinder has at its front end a dish reflector out of the centre of which protrudes a jet, and out of which also protrudes a flint wheel spark generator for lighting the jet. Atop the cylinder is a tightly flanged hinged cap which can snap into place over and into an opening 2.0 x 1.5 cm oval; in front of the cap opening is a swivel device, probably for varying the flow through the jet. At the back of the cylinder is a hook mounted vertically by rivets and a clasp horizontally, for mounting the lamp on a miner's helmet. Marks:"Justrite/Pat, May 7, 1912/ Pat. Oct 28, 1913/ Pat. Nov 23, 1915/ Others Pending."
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0062
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Cowbell Bell, Animal
https://archives.whyte.org/en/permalink/artifact104.03.0001
- Date
- 1885 – 1910
- Material
- metal, brass
- Catalogue Number
- 104.03.0001
- Description
- A round brass bell made from a sheet of metal that has been bent and riveted into shape along the sides. The bell has a loop handle at the top.
1 image
- Title
- Cowbell Bell, Animal
- Date
- 1885 – 1910
- Material
- metal, brass
- Dimensions
- 19.0 x 9.0 x 15.0 cm
- Description
- A round brass bell made from a sheet of metal that has been bent and riveted into shape along the sides. The bell has a loop handle at the top.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.03.0001
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Cowbell Bell, Animal
https://archives.whyte.org/en/permalink/artifact104.03.0002
- Date
- 1885 – 1940
- Material
- metal, brass
- Catalogue Number
- 104.03.0002
- Description
- A brass bell that is cast in the shape of a truncated pyramid with a lug on top for hanging. There are bent metal eyes through the lug. The clapper is made of a single, heavy, piece of metal that hangs from a hook inside at the top.
1 image
- Title
- Cowbell Bell, Animal
- Date
- 1885 – 1940
- Material
- metal, brass
- Dimensions
- 6.0 x 3.7 x 4.9 cm
- Description
- A brass bell that is cast in the shape of a truncated pyramid with a lug on top for hanging. There are bent metal eyes through the lug. The clapper is made of a single, heavy, piece of metal that hangs from a hook inside at the top.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.03.0002
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Cowbell Bell, Animal
https://archives.whyte.org/en/permalink/artifact104.03.0003
- Date
- 1885 – 1940
- Material
- metal, brass
- Catalogue Number
- 104.03.0003
- Description
- A square, flattened, bell that is folded at the top. The bell is made from one sheet of metal folded into shape with a small loop handle at the top. The bell is riveted and braised on both sides. The bell’s clapper is a single light piece of metal that hangs from a large loop inside at the top.
1 image
- Title
- Cowbell Bell, Animal
- Date
- 1885 – 1940
- Material
- metal, brass
- Dimensions
- 4.5 x 2.7 x 4.6 cm
- Description
- A square, flattened, bell that is folded at the top. The bell is made from one sheet of metal folded into shape with a small loop handle at the top. The bell is riveted and braised on both sides. The bell’s clapper is a single light piece of metal that hangs from a large loop inside at the top.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.03.0003
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Cowbell Bell, Animal
https://archives.whyte.org/en/permalink/artifact104.03.0004
- Date
- 1885 – 1910
- Material
- metal, brass
- Catalogue Number
- 104.03.0004
- Description
- A long cylindrical brass bell made from a single sheet of metal that has been cut, folded and braised together at sides to form shape. There is a flat loop handle at the top of the bell. A rolled light metal clapper hangs from a hook inside the bell at the top.
1 image
- Title
- Cowbell Bell, Animal
- Date
- 1885 – 1910
- Material
- metal, brass
- Dimensions
- 8.0 x 3.5 x 4.0 cm
- Description
- A long cylindrical brass bell made from a single sheet of metal that has been cut, folded and braised together at sides to form shape. There is a flat loop handle at the top of the bell. A rolled light metal clapper hangs from a hook inside the bell at the top.
- Subject
- industry
- dairy
- farming
- Pearl Moore
- John Brewster
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.03.0004
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1940
- Material
- metal
- Catalogue Number
- 104.31.1004
- Description
- Long iron hand drill with belly brace. Drill 63.5 long attached to handle bow with a nail through both, handle bow is 16.0 deep and 19.5 wide, floating hand grip 12.3 long. Top of shaft is rounded concave metal band 35.5 x 7.5 has a 2.7 diameter collar soldered to the middle to fit on to top of sha…
1 image
- Title
- Hand Drill
- Date
- 1920 – 1940
- Material
- metal
- Description
- Long iron hand drill with belly brace. Drill 63.5 long attached to handle bow with a nail through both, handle bow is 16.0 deep and 19.5 wide, floating hand grip 12.3 long. Top of shaft is rounded concave metal band 35.5 x 7.5 has a 2.7 diameter collar soldered to the middle to fit on to top of shaft, the band has slots on each end presumably to fasten padding.
- Subject
- industry
- mining
- Natalco
- National Talc Co.
- Credit
- Gift of Bob Hawes, 1972
- Catalogue Number
- 104.31.1004
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1880 – 1900
- Material
- metal; glass; rubber; fibre
- Catalogue Number
- 102.05.0060
- Description
- A coal miner's safety lamp, heavy brass base which acts as fuel chamber is surmounted by a glassed in cylinder protected by strong vertical shafts of wire. A brass ring atop them which supports, by steel shafts, a top plate with a large hook on it for hanging the lamp. Between the upper ring and th…
1 image
- Title
- Oil Lamp
- Date
- 1880 – 1900
- Material
- metal; glass; rubber; fibre
- Dimensions
- 24.5 x 9.2 x 11.0 cm
- Description
- A coal miner's safety lamp, heavy brass base which acts as fuel chamber is surmounted by a glassed in cylinder protected by strong vertical shafts of wire. A brass ring atop them which supports, by steel shafts, a top plate with a large hook on it for hanging the lamp. Between the upper ring and the top plate is a wire mesh cylinder which allows oxygen to feed the flame but which diffuses the heat rising from the flame. The lamp itself consists of a wick which draws fuel from the reservoir, and beside it is a small wire hook which can be operated from the bottom of the lamp base to extinguish the flame.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0060
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1880 – 1920
- Material
- metal
- Catalogue Number
- 102.05.0061
- Description
- A pitcher shaped container consisting of a small milk can like shape domed vessel with a long spout rising at an angle of 45 degrees from it. The top is sealed with a hinged, domed brass lid with a flange which can fit snugly into the brass ring neck of the vessel. A stout wire hook is soldered to …
1 image
- Title
- Oil Lamp
- Date
- 1880 – 1920
- Material
- metal
- Dimensions
- 8.0 x 4.4 x 10.8 cm
- Description
- A pitcher shaped container consisting of a small milk can like shape domed vessel with a long spout rising at an angle of 45 degrees from it. The top is sealed with a hinged, domed brass lid with a flange which can fit snugly into the brass ring neck of the vessel. A stout wire hook is soldered to the body of the vessel. “Treihawa Bros., Parsons, Pa” is stamped on side of vessel.
- Subject
- households
- industry
- mining
- Anthracite
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0061
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1910 – 1940
- Material
- metal; wood
- Catalogue Number
- 104.31.1005
- Description
- One handled saw, steel blade 83.0 x 8.3, wooden handle 3.0 diameter has a steel collar and loop on end which clamps down on to the blade.
1 image
- Title
- Saw
- Date
- 1910 – 1940
- Material
- metal; wood
- Dimensions
- 32.7 x 83.0 cm
- Description
- One handled saw, steel blade 83.0 x 8.3, wooden handle 3.0 diameter has a steel collar and loop on end which clamps down on to the blade.
- Subject
- industry
- mining
- Natalco
- National Talc Co.
- Credit
- Gift of Bob Hawes, 1972
- Catalogue Number
- 104.31.1005
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.