Narrow Results By
Camera Accessories
https://archives.whyte.org/en/permalink/artifact104.41.0125%20a-d
- Date
- 1950 – 1980
- Material
- cardboard; plastic; metal; paper; wood;
- Catalogue Number
- 104.41.0125 a-d
- Description
- Miscellaneous camera equipment housed in a red Contina box that includes a paper, wood, and metal bellows that is rectangular at one end and round at the other, a square Tiffen lens hood with an Endalite ring attached to one end, an empty metal Agfa 35mm film canister with a green sticker on the to…
1 image
- Title
- Camera Accessories
- Date
- 1950 – 1980
- Material
- cardboard; plastic; metal; paper; wood;
- Dimensions
- 6.6 x 9.2 x 13.9 cm
- Description
- Miscellaneous camera equipment housed in a red Contina box that includes a paper, wood, and metal bellows that is rectangular at one end and round at the other, a square Tiffen lens hood with an Endalite ring attached to one end, an empty metal Agfa 35mm film canister with a green sticker on the top, and various lens caps and pieces - mostly plastic, one metal. On one short end of the box is a piece of paper adhered that has “Rollei Lensehood 3x4 “ “ [Lenshood] Rollei Lensecap” written in black ink.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0125 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1965
- Material
- metal; plastic; fabric;
- Catalogue Number
- 104.41.0162
- Description
- Large photographic negative enlarger. Mostly made of blue-grey metal, the enlarger consists of a large rectangular base with a support arm rising from the back which holds the enlarging mechanism. Hand-crank wheels on either side of the support arm allows the enlarger to be moved up and down. The t…
1 image
- Title
- Englarger
- Date
- 1950 – 1965
- Material
- metal; plastic; fabric;
- Dimensions
- 140.0 x 40.0 x 74.0 cm
- Description
- Large photographic negative enlarger. Mostly made of blue-grey metal, the enlarger consists of a large rectangular base with a support arm rising from the back which holds the enlarging mechanism. Hand-crank wheels on either side of the support arm allows the enlarger to be moved up and down. The top of the enlarger is a large silver dome [possibly the light] with the black and white fabric-wrapped power cord coming out the top, the dome sits on top of the main blue-grey metal tray where more dials can adjust settings and the tray for inserting the original negative sides out the front, coming out the bottom of the frame is a grey bellows that has the focussing lens on the bottom.
- Subject
- Nicholas Morant
- photography
- photograph equipment
- darkroom
- camera equipment
- photograph developing
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0162
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1950
- Material
- wood; metal; plastic; glass;
- Catalogue Number
- 104.41.0163
- Description
- Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger su…
1 image
- Title
- Enlarger
- Date
- 1930 – 1950
- Material
- wood; metal; plastic; glass;
- Dimensions
- 105.0 x 44.5 x 55.7 cm
- Description
- Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger support to move up and down the support arm. The enlarger itself consists of a shiny metal dome with a fabric-wrapped power cord coming out the top [most likely the house for the light source] mounted on top of the grey metal frame [to which the enlarger support is attached] and into which several different negative trays can be fit, below the frame are dark grey fabric bellows that can be adjusted along a set of metal poles, the bottom of the bellows are attached to a smaller grey metal frame that also houses the focussing lens and a coloured filter that can be rotated in and out of frame.
- Subject
- Nicholas Morant
- photography
- photograph equipment
- camera equipment
- darkroom
- photograph developing;
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0163
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1980
- Material
- metal; wood; plastic;
- Catalogue Number
- 104.41.0168
- Description
- Small metal tripod with round black rubber stoppers on the ends of the legs for grip and a long narrow camera mount plate made of wood with metal edges, painted silver. The plate has three screws passing through it and a central hinge onto which a grip is attached.
1 image
- Title
- Tripod
- Date
- 1950 – 1980
- Material
- metal; wood; plastic;
- Dimensions
- 14.5 x 12.7 x 69.0 cm
- Description
- Small metal tripod with round black rubber stoppers on the ends of the legs for grip and a long narrow camera mount plate made of wood with metal edges, painted silver. The plate has three screws passing through it and a central hinge onto which a grip is attached.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0168
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Auto Transformer
https://archives.whyte.org/en/permalink/artifact104.41.0110
- Date
- 1950 – 1970
- Material
- metal; plastic
- Catalogue Number
- 104.41.0110
- Description
- Rectangular metal box with rubber knobs on the bottom to keep it off of tabletops, a 0-100 dial, pale yellow circular button, and red light on the top, and four different plugs across the two short sides - one side has one and the other has three. There is a circular hole in the bottom that allows …
1 image
- Title
- Auto Transformer
- Date
- 1950 – 1970
- Material
- metal; plastic
- Dimensions
- 13.5 x 15.1 x 12.6 cm
- Description
- Rectangular metal box with rubber knobs on the bottom to keep it off of tabletops, a 0-100 dial, pale yellow circular button, and red light on the top, and four different plugs across the two short sides - one side has one and the other has three. There is a circular hole in the bottom that allows some limited access to the interior, possibly a vent. Variable Autotransformers are used to control electrical voltage, power, and current so as to provide a safe and steady electrical feed to a device.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0110
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1969 – 1975
- Material
- metal; plastic; glass;
- Catalogue Number
- 104.41.0150
- Description
- An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
1 image
- Title
- Camera
- Date
- 1969 – 1975
- Material
- metal; plastic; glass;
- Dimensions
- 14.4 x 18.0 x 14.5 cm
- Description
- An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0150
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Camera Bellows
https://archives.whyte.org/en/permalink/artifact104.41.0113
- Date
- 1950 – 1970
- Material
- paper; metal; fabric;
- Catalogue Number
- 104.41.0113
- Description
- Black camera lens bellows attachment on silver rails. There is no lens fixed into the bellows. Bellows housed inside a fabric draw-string bag.
1 image
- Title
- Camera Bellows
- Date
- 1950 – 1970
- Material
- paper; metal; fabric;
- Dimensions
- 16.0 x 15.3 x 10.7 cm
- Description
- Black camera lens bellows attachment on silver rails. There is no lens fixed into the bellows. Bellows housed inside a fabric draw-string bag.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0113
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1980
- Material
- leather; glass; metal; fabric; paper
- Catalogue Number
- 104.41.0106 a-e
- Description
- Black box with a hinged lid held closed by two snaps on leather tabs and lined with blue velvet. The interior of the box is divided into three compartments. Contents of the box include an unopened cardboard box of Kodak Color Film - a piece of tape adhered to the bottom of the box has “SPARE HEAT A…
1 image
- Title
- Camera Box
- Date
- 1950 – 1980
- Material
- leather; glass; metal; fabric; paper
- Dimensions
- 23.0 x 22.8 x 38.1 cm
- Description
- Black box with a hinged lid held closed by two snaps on leather tabs and lined with blue velvet. The interior of the box is divided into three compartments. Contents of the box include an unopened cardboard box of Kodak Color Film - a piece of tape adhered to the bottom of the box has “SPARE HEAT ABSORB GLASSES 4x5” written in black ink, probably by Morant - a winged lens insert mounted in a metal frame with a pane of glass on each side (wrapped in a length of brown fabric), a small black box lined with purple velvet that snaps shut the same way as the main box, and a “NO. 4 CONDENSER MOUNT” for 4 inch lenses.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0106 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1970
- Material
- leather; metal; glass; plastic; fabric; wood
- Catalogue Number
- 104.41.0107 a,b
- Description
- Manufacturer details for Enlarger housed within box.Black equipment box with a hinged lid held closed with leather tabs/snaps as well as an olive green fabric strap wrapped around the box. The interior of the box is lined with blue velvet and has both plain wood and covered supports and braces thro…
1 image
- Title
- Camera Box
- Date
- 1950 – 1970
- Material
- leather; metal; glass; plastic; fabric; wood
- Dimensions
- 24.9 x 22.5 x 42.7 cm
- Description
- Manufacturer details for Enlarger housed within box.Black equipment box with a hinged lid held closed with leather tabs/snaps as well as an olive green fabric strap wrapped around the box. The interior of the box is lined with blue velvet and has both plain wood and covered supports and braces throughout. Contents of the box consists only of a Kodak Precision Enlarger with the open metal end capped with a cardboard box.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0107 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1999
- Material
- leather; fabric; metal; wood; paper
- Catalogue Number
- 104.41.0087
- Description
- Burgundy leather hard-sided travel case for Leica camera accessories. The case looks like a standard briefcase, with leather caps on the corners and two locking clasps, one on either side of the handle, which is still wrapped in paper. Throughout the exterior are black and silver metal studs either…
1 image
- Title
- Camera Case
- Date
- 1920 – 1999
- Material
- leather; fabric; metal; wood; paper
- Dimensions
- 10.6 x 26.2 x 41.5 cm
- Description
- Burgundy leather hard-sided travel case for Leica camera accessories. The case looks like a standard briefcase, with leather caps on the corners and two locking clasps, one on either side of the handle, which is still wrapped in paper. Throughout the exterior are black and silver metal studs either holding the corner protectors in place or the interior dividing compartments. The interior of the lid is lined with red and white plaid paper and the main body of the case is lined with thin pale wood. Throughout the interior are wooden pieces meant to separate accessories, some of the pieces are covered with burgundy velvet. There is a small metal ring with two keys for the latches’ locks hanging from the handle.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0087
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.