Narrow Results By
Matchbox Holder
https://archives.whyte.org/en/permalink/artifact102.04.0596
- Date
- 1940 – 1960
- Material
- metal; tin;
- Catalogue Number
- 102.04.0596
- Description
- Metal wall-mounted matchbox holder with an opening at the top and another that curves up from the bottom so that boxes can be filled from the top and funnel through to the lower opening. Printed on the front in blue inside a zig-zag border is “CASH OR CREDIT AT MURDOCH’S Staple and Fancy GROCERIES …
1 image
- Title
- Matchbox Holder
- Date
- 1940 – 1960
- Material
- metal; tin;
- Dimensions
- 14.5 x 7.0 x 7.1 cm
- Description
- Metal wall-mounted matchbox holder with an opening at the top and another that curves up from the bottom so that boxes can be filled from the top and funnel through to the lower opening. Printed on the front in blue inside a zig-zag border is “CASH OR CREDIT AT MURDOCH’S Staple and Fancy GROCERIES and PRODUCE Telephone 129 BANFF, ALBERTA.”
- Credit
- Gift of Robert Crosby Family, Banff, 1998
- Catalogue Number
- 102.04.0596
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1940 – 1970
- Material
- cardboard; plastic; metal;
- Catalogue Number
- 104.45.0066
- Description
- Black plastic “OAKVILLE PIN HOLDER” in its original yellow cardboard box. The pin holder consists of a two-tiered body on a wider sloped base - the lower compartment contains the pins and the upper piece is pressed down on a spring, which funnels a pin through a hole on the top, allowing it to be p…
1 image
- Title
- Pin Holder
- Date
- 1940 – 1970
- Material
- cardboard; plastic; metal;
- Dimensions
- 6.5 x 6.8 x 9.3 cm
- Description
- Black plastic “OAKVILLE PIN HOLDER” in its original yellow cardboard box. The pin holder consists of a two-tiered body on a wider sloped base - the lower compartment contains the pins and the upper piece is pressed down on a spring, which funnels a pin through a hole on the top, allowing it to be pulled out. The top consists of a cap that can be snapped off by pressing a small metal lever in order to access the pin compartment. The yellow cardboard box contains manufacturer information and instructions throughout the outside.
- Credit
- Gift of Robert Crosby Family, Banff, 1998
- Catalogue Number
- 104.45.0066
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1907 – 1920
- Material
- metal;
- Catalogue Number
- 102.04.0599 a-e
- Description
- Two metal Miller Lock Co. padlocks, one larger than the other, and three pieces of metal that serve an unknown purpose. The larger lock has the manufacturer details engraved along the curved arm, “MILLER” engraved in a decorative scroll on the body above the key hole, and “EIGHT LEVER” engraved bel…
1 image
- Title
- Padlock
- Date
- 1907 – 1920
- Material
- metal;
- Dimensions
- 1.1 x 6.2 x 9.4 cm
- Description
- Two metal Miller Lock Co. padlocks, one larger than the other, and three pieces of metal that serve an unknown purpose. The larger lock has the manufacturer details engraved along the curved arm, “MILLER” engraved in a decorative scroll on the body above the key hole, and “EIGHT LEVER” engraved below the key hole. The smaller lock has “MILLER” in a decorative scroll and “3-LEVER” engraved above the key hole. Both locks have several brass studs throughout the fronts and backs. The three extra metal pieces all have small holes drilled in them, two are longer and tapered at one end and curve in a semi-circle, the third is mostly flat with the two long sides folded up and towards the center and has a small hook at one short end.
- Subject
- locks
- protection devices
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 102.04.0599 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.