Skip header and navigation

Narrow Results By

932 records – page 1 of 47.

Date
1959
Material
wood; brass; plastic
Catalogue Number
103.09.1129
Description
Brass statuette trophy depicting a man wearing a military uniform saluting with his right arm. He is standing on top of a gold base, which features a chain-like pattern on the edges. Below this, a yellow/green tortoiseshell-eque tube of plastic (in the style of reeded glass) rises up from the base;…
  1 image  
Title
Military Trophy
Date
1959
Material
wood; brass; plastic
Dimensions
48.0 x 15.0 cm
Description
Brass statuette trophy depicting a man wearing a military uniform saluting with his right arm. He is standing on top of a gold base, which features a chain-like pattern on the edges. Below this, a yellow/green tortoiseshell-eque tube of plastic (in the style of reeded glass) rises up from the base; it is approximately the same height as the man himself. The plastic tube is situated on a bezeled block of wood in two tones, one a deep brown colour, the other a light yellow. A small, brass coloured metal plate at the base of statue reads “Presented To / 2351/ Royal Canadian Army Cadet Corps / Banff Alberta / By The / Alberta United Services Institute / Calgary Alberta / For Being The Best Army Cadet Corps / In Southern Alberta / 1959”. The plate is held in place by four metal rivets, one in each corner.
Subject
military
cadet
statue
statuette
trophy
award
Credit
Gift of William G. Robinson, Vancouver, 1998
Catalogue Number
103.09.1129
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
later than 1959
Material
wood; cedar
Catalogue Number
102.04.0604
Description
a circular tray made of cedar. Printed on the front of the tray is a painted image of two red gondola cabins over the town of Banff. Cascade mountain and Tunnel Mountain are in background. On the reverse are two paragraphs in black printed writing about the Sulphur Mountain Gondola as well as a go…
  1 image  
Title
Decorative Tray
Date
later than 1959
Material
wood; cedar
Dimensions
35.5 x 35.5 cm
Description
a circular tray made of cedar. Printed on the front of the tray is a painted image of two red gondola cabins over the town of Banff. Cascade mountain and Tunnel Mountain are in background. On the reverse are two paragraphs in black printed writing about the Sulphur Mountain Gondola as well as a gold sticker that reads “HANDCRAFTED BY PANORAMA MADE IN CANADA”. There is a brass ring to hang it.
Subject
Banff
tourism
Sulphur Mountain
souvenir
Credit
Gift of Juanita Rose Violini, Banff, 2014
Catalogue Number
102.04.0604
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1980
Material
fabric; paper; plastic;
Catalogue Number
104.41.0120
Description
Various manuals pertaining to camera, lens, and light settings/instructions housed in a white fabric pouch with the Canadian National Railway “CN” logo printed in black on the front.
  1 image  
Title
Photography Manuals
Date
1950 – 1980
Material
fabric; paper; plastic;
Dimensions
2.1 x 5.5 x 21.3 cm
Description
Various manuals pertaining to camera, lens, and light settings/instructions housed in a white fabric pouch with the Canadian National Railway “CN” logo printed in black on the front.
Subject
Nicholas Morant
instructions
directions
photography
Canadian National Railway
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0120
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1960
Material
metal;
Catalogue Number
104.19.0281
Description
Black and silver metal hand-held plunger-style potato masher. The lower section of the handle wraps around the round silver basket, which is completely covered in small round holes - the upper section attaches to the round solid metal plunger plate that can move slightly to accommodate moving in an…
  1 image  
Title
Potato Masher
Date
1950 – 1960
Material
metal;
Dimensions
11.3 x 8.7 x 25.5 cm
Description
Black and silver metal hand-held plunger-style potato masher. The lower section of the handle wraps around the round silver basket, which is completely covered in small round holes - the upper section attaches to the round solid metal plunger plate that can move slightly to accommodate moving in and out of the basket on the hinged handle. The manufacturer details are engraved on the top of the solid metal plunger plate.
Subject
kitchen utensils
cooking
food preparation;
Credit
Gift of Bill Mather, Edmonton, 1991
Catalogue Number
104.19.0281
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1970
Material
plastic; metal; thread;
Catalogue Number
104.45.0065
Description
Cream and red cylindrical thread holder with a small head with a black painted face and red hat on top. Inside the main body is a cream-coloured insert with three different coloured threads wrapped around it, separated by disks - the insert has a hollow opening at the top where three sewing needles…
  1 image  
Title
Thread Holder
Date
1950 – 1970
Material
plastic; metal; thread;
Dimensions
6.9 cm
Description
Cream and red cylindrical thread holder with a small head with a black painted face and red hat on top. Inside the main body is a cream-coloured insert with three different coloured threads wrapped around it, separated by disks - the insert has a hollow opening at the top where three sewing needles [one of which has a short length of black thread in it] are housed. “FRENCH IVORY” is stamped on the bottom.
Subject
Crosby family
Abegweit
sewing
sewing equipment
houseware
Credit
Gift of Robert Crosby Family, Banff, 1998
Catalogue Number
104.45.0065
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1975
Material
metal; plastic;
Catalogue Number
104.41.0114 a-c
Description
Three cone-shaped flash reflector attachments of different configurations. The largest reflector has a matte black metal mount with “HR” inscribed inside a circle on both sides - the reflector is perpendicular to the base of the mount and directly opposite from the base of the cone is a red plastic…
  1 image  
Title
Reflectors Flash
Date
1950 – 1975
Material
metal; plastic;
Dimensions
15.2 x 15.2 x 12.1 cm
Description
Three cone-shaped flash reflector attachments of different configurations. The largest reflector has a matte black metal mount with “HR” inscribed inside a circle on both sides - the reflector is perpendicular to the base of the mount and directly opposite from the base of the cone is a red plastic button. The plug for the light bulb is located in the middle of the cone. The mid-sized reflector consists of a bowl-shaped disk with a bulb plug at the bottom and a matte black metal mount directly below that. In the middle of the reflector is a small dent.The smallest reflector is a deep cone-shape with a central plug for the light bulb and another plug for the reflector on the outside.
Subject
Nicholas Morant
photography
camera equipment
camera flash
flash reflector
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0114 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1970
Material
paper; metal; fabric;
Catalogue Number
104.41.0113
Description
Black camera lens bellows attachment on silver rails. There is no lens fixed into the bellows. Bellows housed inside a fabric draw-string bag.
  1 image  
Title
Camera Bellows
Date
1950 – 1970
Material
paper; metal; fabric;
Dimensions
16.0 x 15.3 x 10.7 cm
Description
Black camera lens bellows attachment on silver rails. There is no lens fixed into the bellows. Bellows housed inside a fabric draw-string bag.
Subject
Nicholas Morant
photography
camera equipment
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0113
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1969
Material
bone; sinew
Catalogue Number
107.01.0306
Description
Carved figure made from bone. At the top front is a carved face and the limbs (fin-like arms and pointed legs) are held on with some kind of string - possibly sinew - that has been fed through the body.
  1 image  
Title
Figurine Carved
Date
1950 – 1969
Material
bone; sinew
Dimensions
9.5 cm
Description
Carved figure made from bone. At the top front is a carved face and the limbs (fin-like arms and pointed legs) are held on with some kind of string - possibly sinew - that has been fed through the body.
Subject
carving
figurine
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
107.01.0306
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1969
Material
wood
Catalogue Number
107.01.0305
Description
Decorative carved wooden fox and tree. Consist of two pieces of wood attached by wooden hinges so that the fox will move up and down in front of the tree, in which is a squirrel. “150” is written in pencil on the bottom.
  1 image  
Title
Decorative Carving
Date
1950 – 1969
Material
wood
Dimensions
13.1 x 2.0 x 16.8 cm
Description
Decorative carved wooden fox and tree. Consist of two pieces of wood attached by wooden hinges so that the fox will move up and down in front of the tree, in which is a squirrel. “150” is written in pencil on the bottom.
Subject
carving
decorative carving
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
107.01.0305
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1969
Material
wood; metal; paper
Catalogue Number
107.01.0304
Description
Carved wooden ship with “GARM” painted on the sides. The ship has two masts, a single central chimney stack, two green and white row boats, and a green, white, and yellow bridge. The main part of the ship is painted black and red.Stamped on the bottom is “Made in Denmark.”
  1 image  
Title
Wood Carving
Date
1950 – 1969
Material
wood; metal; paper
Dimensions
10.0 x 3.8 x 19.4 cm
Description
Carved wooden ship with “GARM” painted on the sides. The ship has two masts, a single central chimney stack, two green and white row boats, and a green, white, and yellow bridge. The main part of the ship is painted black and red.Stamped on the bottom is “Made in Denmark.”
Subject
carving
decorative carving
ship
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
107.01.0304
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1969
Material
wood; metal; fabric
Catalogue Number
107.01.0303
Description
Carved and painted decorative wall hanging of a Scandinavian-styled house. There are two small figures - one male and one female (who is holding an umbrella) - mounted on a horizontal piece of wood that can swing in and out of openings in the front of the building. To the right of the figures is a …
  1 image  
Title
Decorative Carving
Date
1950 – 1969
Material
wood; metal; fabric
Dimensions
17.2 x 8.0 x 23.5 cm
Description
Carved and painted decorative wall hanging of a Scandinavian-styled house. There are two small figures - one male and one female (who is holding an umbrella) - mounted on a horizontal piece of wood that can swing in and out of openings in the front of the building. To the right of the figures is a yellow-painted wall with a window in it and a short fence in front of it. The upper floor of the house has a balcony across it with three flowerpots and a pink and white polka-dotted cloth on the banister. Behind the banister is a blue door with red shutters. The roof is painted red and has a short chimney on the left-hand side and the back panel the house is mounted to is painted blue with a yellow trim and flowers throughout. On the back is a black and gold sticker reading “Sydney Reynolds LTD. VICTORIA B.C. DIRECT IMPORTERS” as well as “HAND CARVED” written in black ink, possibly by Morant.
Subject
carving
home decoration
wall hanging
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
107.01.0303
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1957 – 1957
Material
wood
Catalogue Number
107.01.0302 a,b
Description
Two carved and painted wooden birds mounted on raw pieces of wood. One bird is a pileated woodpecker and the other is a flicker. Written on one end of the log the flicker is mounted on is “JOHN GERVERS KELOWNA, BC CANADA 1957 FLICKER” in black ink.
  1 image  
Title
Decorative Carving
Date
1957 – 1957
Material
wood
Dimensions
12.4 x 5.9 x 21.7 cm
Description
Two carved and painted wooden birds mounted on raw pieces of wood. One bird is a pileated woodpecker and the other is a flicker. Written on one end of the log the flicker is mounted on is “JOHN GERVERS KELOWNA, BC CANADA 1957 FLICKER” in black ink.
Subject
carving
decorative art
birds
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
107.01.0302 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1980
Material
leather; metal; wood; glass; paper; plastic
Catalogue Number
104.41.0102 a-h
Description
Hard-sided black travel case with metal corner brackets, reinforcements along all edges, metal loops on both short sides with a remnant of a leather strap attached to the right-hand loop, a leather handle attached to the lid with metal brackets, wooden runners on the bottom and front of the case, a…
  1 image  
Title
Equipment Case
Date
1950 – 1980
Material
leather; metal; wood; glass; paper; plastic
Dimensions
93.4 x 25.5 x 41.8 cm
Description
Hard-sided black travel case with metal corner brackets, reinforcements along all edges, metal loops on both short sides with a remnant of a leather strap attached to the right-hand loop, a leather handle attached to the lid with metal brackets, wooden runners on the bottom and front of the case, and three metal clasps - the centre one of which has a keyhole. Attached to the handle on the lid is a leather travel tag with a clear plastic window through which Morant’s Canadian Pacific details are visible.The interior of the case lined with beige fabric and is divided into five compartments in the main body (in addition there are two inserts, one a box the other a panel, that sit on supports) and three compartments in the lid. Two of the lid compartments have aluminum foil lining the backs.Contents of the case include:b : thirteen film magazines, some of which are wrapped in paper. c : two Spiralite and two Kodak lenses - the Spiralite ones are housed in leather pouches and one of the Kodak ones is housed in the original yellow “Kodak Pola-Screen” cardboard box.d : three Technika lenses housed in fabric bags - one is a deep blue velvet bag with a gold drawstring, one is a blue-green bag with red cord trim that snaps closed, and one is a patterned red structured fabric box with metal clasps.e : miscellaneous tools and includes fold-out magnifying glasses in leather envelopes, remote triggers, wooden spacers, pliers, micro screwdrivers, a timer attachment in a small leather case, a pen flashlight, and a small flat-headed screwdriver.f : assorted papers and manuals - also includes “Photographic Authorization” forms for use of Morant’s photographs.h : four lens hoods. Two are housed in fabric bags, one a purple Crown Royal bag and one in a red and blue bag. g : various filters - most are Kodak and housed in their original paper/cardboard boxes/sleeves and most have their identifier written on the box possibly by Morant.
Subject
Nicholas Morant
photography
camera equipment
Canadian Pacific Railway
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0102 a-h
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955
Material
metal
Catalogue Number
103.07.0319 a-c
Description
Two identical round silver coloured medals and one brass, each with a hanging ring soldered to the top. Silver medals have "Alberta Golden Jubilee 1905 - 1955" with Alberta Coat of Arms in centre on one side. All 3 medals have "Friendship Loyalty Progress" and in the centre two hands shaking, one…
  1 image  
Title
Commemorative Medal
Date
1955
Material
metal
Dimensions
7.5 x 6.5 cm
Description
Two identical round silver coloured medals and one brass, each with a hanging ring soldered to the top. Silver medals have "Alberta Golden Jubilee 1905 - 1955" with Alberta Coat of Arms in centre on one side. All 3 medals have "Friendship Loyalty Progress" and in the centre two hands shaking, one with Indigenous designs on coat cuff, below a beaming sun on the other side (brass medal has blank back). a) Silver medal. Attached to braided beaded loop (38.0 cm long). Light blue and dark blue beads that end in a tassel. White tag that reads “Mrs Mary House from Nordegg May 8 1970”b) Silver meDAL.red white and blue ribbon (11.0 cm long) through loop at top. White tag attached that reads “Ken [Yeugeis?’] fathers medal” on one side and “blind mans medal” on opposite. c) brass medal. Yellow tag attached that reads “[??] belonged to Rena Poucette”
Subject
Whyte home
first nations
Alberta
commemoration
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.07.0319 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1954
Material
cardboard
Catalogue Number
110.01.0112
Description
Small yellow box that reads “JELL-O LEMON PIE FILLING” on the front with a picture of a slice of lemon pie. On the back there is instructions as well as a recipe for a different dessert. On the sides there are an English and French instruction on how to make the meringue.
  1 image  
Title
Pie Mix Box
Date
1954
Material
cardboard
Dimensions
9.0 x 3.0 x 7.5 cm
Description
Small yellow box that reads “JELL-O LEMON PIE FILLING” on the front with a picture of a slice of lemon pie. On the back there is instructions as well as a recipe for a different dessert. On the sides there are an English and French instruction on how to make the meringue.
Subject
Whyte Home
cooking
food
eating
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
110.01.0112
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950
Material
metal; paper; glass; paint
Catalogue Number
104.47.1007
Description
An old-fashioned metal alarm clock with a manual bell (4.0x8.0cm wide) on top. The face is off-white in colour and made from paper. The numbers on the face are in Roman numerals with gold-coloured ornate crosses in between each number. There is a round, intricate, gold-coloured design (7.0cm radi…
  1 image  
Title
Alarm Clock
Date
1950
Material
metal; paper; glass; paint
Dimensions
25.0 x 17.5 cm
Description
An old-fashioned metal alarm clock with a manual bell (4.0x8.0cm wide) on top. The face is off-white in colour and made from paper. The numbers on the face are in Roman numerals with gold-coloured ornate crosses in between each number. There is a round, intricate, gold-coloured design (7.0cm radius) in the centre of the face. There are two black clock hands, hour and minute, and two smaller mini faces (both measuring 2.0cm wide) above and below the centre of the face. The top mini face is an alarm, with numbers 1-12. The bottom mini face displays the seconds, in degrees of 10 with numbers. On top of the bell there is a gold-coloured ring, possibly used for carrying. There are two gold-coloured splayed legs to support the clock when upright. There is a golden banded detail around the circumference of the face and the body. On the back of the clock, there are two wind-up mechanisms, the viewer-left key is marked with “W.A.” and has an arrow pointing in a clockwise direction, the viewer-right key is marked with “W.T.” and has an arrow pointing in a counterclockwise direction. Situated between these wind-up mechanisms are two buttons that are arranged vertically. The top button controls the alarm and moves the hands in a clockwise direction. The bottom button is missing. Above the top button there is an “A”, and below the bottom button there is an “H”. There is also a slide-adjustment knob marked with an “F” on viewer-left and “S” on viewer-right (possibly used as a faster-slower feature for the alarm bell). There is also a button missing from underneath this slide-adjustment knob. Scratched into the top of the back of the clock is “Nick Morant Banff”. Written upside-down at the top viewer-right is “55.”
Subject
households
timekeeping
Nick Morant
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.47.1007
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Horizontal, Ice Piton

https://archives.whyte.org/en/permalink/artifact108.04.1177
Date
1950
Material
metal
Catalogue Number
108.04.1177
Description
An early example of a hard metal ice piton with an oblong metal ring attached. The blade has a twist turn before the hole where the ring goes through. The ring has been welded together to close. The blade has nicks on either side making it serrated for ice climbing. “CJB” is engraved on the blade.
  1 image  
Title
Horizontal, Ice Piton
Date
1950
Material
metal
Dimensions
2.5 x 26.8 w/o ring cm
Description
An early example of a hard metal ice piton with an oblong metal ring attached. The blade has a twist turn before the hole where the ring goes through. The ring has been welded together to close. The blade has nicks on either side making it serrated for ice climbing. “CJB” is engraved on the blade.
Subject
sports
ice climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
Catalogue Number
108.04.1177
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1960
Material
hair; fibre; metal; skin
Catalogue Number
103.05.1070
Description
Three quarter length bison coat, Warden's, raglan sleeves, shawl collar, double breasted straight cut coat, 4 brass buttons each side (2.3 dia.) have "NPC" centered with a crown and wreath, leather straps attached with rivets at centre, buttonholes each end, 3 more brass buttons and leather closure…
  1 image  
Title
Buffalo Coat
Date
1950 – 1960
Material
hair; fibre; metal; skin
Dimensions
116.0 x 60.0 cm
Description
Three quarter length bison coat, Warden's, raglan sleeves, shawl collar, double breasted straight cut coat, 4 brass buttons each side (2.3 dia.) have "NPC" centered with a crown and wreath, leather straps attached with rivets at centre, buttonholes each end, 3 more brass buttons and leather closure for neck, deep slit pockets each side, fully lined, black cotton, leather at stress points and at neck with chain to hang, inside pocket, a very well sewn coat.
Subject
Park Wardens
Andy Anderson
Credit
Gift of Andy Anderson, Brentwood Bay, 1987
Catalogue Number
103.05.1070
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955 – 1970
Material
fibre; metal
Catalogue Number
103.05.1072
Description
Warden's double breasted three quarter length overcoat, fine wool serge, light brown, 3 brass buttons each side, 2 more at collar, also corresponding buttonholes each side, 2 buttons at wrist (1 missing left sleeve) 2 inset pockets with flaps, slit pocket at left chest, fully lined with gold satin,…
  1 image  
Title
Overcoat
Date
1955 – 1970
Material
fibre; metal
Dimensions
64.0 x 90.0 cm
Description
Warden's double breasted three quarter length overcoat, fine wool serge, light brown, 3 brass buttons each side, 2 more at collar, also corresponding buttonholes each side, 2 buttons at wrist (1 missing left sleeve) 2 inset pockets with flaps, slit pocket at left chest, fully lined with gold satin, metal chain for hanging at back collar, epaulettes with buttons, sewn-on crests at shoulder: "National Parks Canada Chief Park Warden" on right shoulder, French on left "Chief Park Warden Gardien en Chef" above breast pocket.
Subject
Park Wardens
Andy Anderson
Credit
Gift of Andy Anderson, Brentwood Bay, 1987
Catalogue Number
103.05.1072
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1966
Material
metal; plastic; skin
Catalogue Number
104.41.1027
Description
Realist stereo camera with leather case; heavy for its size; matte finish metal with black plastic on sides moving around to the back; black plastic lens cover. hinged at top; inside of cover is an index of distance/aperture settings; 2 lenses with viewfinder lens between; 2 small square viewing le…
  1 image  
Title
Stereo Camera
Date
1950 – 1966
Material
metal; plastic; skin
Dimensions
17.0 x 6.6 x 6.2 cm
Description
Realist stereo camera with leather case; heavy for its size; matte finish metal with black plastic on sides moving around to the back; black plastic lens cover. hinged at top; inside of cover is an index of distance/aperture settings; 2 lenses with viewfinder lens between; 2 small square viewing lenses each outside of lens; lever under centre viewfinder (to prime shutter); underside is serial number; camera back locking lever, tripod mount; distance dial, measurement in feet; film advance knobs and rewind knob on top; frame indicator; flash shoe; dial with "A" "R" with arrows pointing opposite directions; fresh frame indicator; shutter releasebutton; 2 small round viewfinders; film in camera; back detached completely; leather strap; brown leather case; secure tripod mount; green corduroy lined; manufacturer insignia outer top portion; fastens with snaps (5).
Subject
photography
Pearl Brewster Moore
Credit
Gift of Charles C. Reid, Banff, Alberta, 1986
Catalogue Number
104.41.1027
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

932 records – page 1 of 47.

Back to Top