Narrow Results By
- Date
- 1920 – 1999
- Material
- leather; metal; fabric; paper
- Catalogue Number
- 104.41.0088
- Description
- A travel case made from some hard light-weight black material (possibly metal) with a hinged lid that closes with metal latches on either side of a latched lock. Metal brackets on all of the corners and reinforcing along all edges - wooden runners along the bottom of the case horizontally. There is…
1 image
- Title
- Camera Case
- Date
- 1920 – 1999
- Material
- leather; metal; fabric; paper
- Dimensions
- 36.2 x 34.4 x 16.5 cm
- Description
- A travel case made from some hard light-weight black material (possibly metal) with a hinged lid that closes with metal latches on either side of a latched lock. Metal brackets on all of the corners and reinforcing along all edges - wooden runners along the bottom of the case horizontally. There is a leather strap that clips into loops on the short sides of the box as well as a leather travel tag. Attached to the leather strap is a yellow Canadian Pacific Railway travel tag with a piece of string. Throughout the exterior are various travel labels, mostly torn. On the lid is a white rectangular “Canadian Pacific” label that reads “Nicholas Morant, Special Photographer Canadian Pacific Ltd. care CP Transport” in typed text and “Banff Alta” written in black ink above a scratched out typed “Victoria, B.C.” Also on the lid is a piece of masking tape with “LEICA & FILM & ACCESSORIES” written in blue ink possibly by Nick Morant. The interior is lined with beige fabric and both the main body and the interior of the lid are divided into two equal compartments. In one of the body compartments are wooden slats that most likely sit on supports inside each part to create additional compartments at the bottom of the case, but they are not in place. The compartments in the lid are held closed with small pieces of leather that snap onto the front panels which hinge down on strips of brown fabric tape. Inside the case and lid compartments are a Leica camera and various accessories,
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0088
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1967 – 1990
- Material
- metal; plastic; fabric
- Catalogue Number
- 104.41.0097
- Description
- Dull grey travel case with shiny metal corner brackets, reinforcements along the edges, handle on the lid, and two lockable clasps. A black label underneath the handle on the lid reads “ASAHI PENTAX 6x7 TAKUMAR 1:4 f=600mm ASAHI OPT. CO. JAPAN.” Attached to the handle is a brown leather travel tag …
1 image
- Title
- Camera Case
- Date
- 1967 – 1990
- Material
- metal; plastic; fabric
- Dimensions
- 25.5 x 23.9 x 45.5 cm
- Description
- Dull grey travel case with shiny metal corner brackets, reinforcements along the edges, handle on the lid, and two lockable clasps. A black label underneath the handle on the lid reads “ASAHI PENTAX 6x7 TAKUMAR 1:4 f=600mm ASAHI OPT. CO. JAPAN.” Attached to the handle is a brown leather travel tag with a clear plastic window - visible through the window is a white card that reads “N Morant Special Photographer Public Relations and Advertising Canadian Pacific Banff, Alberta.”The interior of the case is lined with red velvet and consists of different-shaped supports throughout the main body and inside the lid. Case most likely used to house Pentax camera bodies and lenses.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0097
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Camera Equipment Case
https://archives.whyte.org/en/permalink/artifact104.41.0096%20a-g
- Date
- 1970 – 1985
- Material
- leather; wood; metal; fabric; plastic; glass
- Catalogue Number
- 104.41.0096 a-g
- Description
- Brown hard-sided travel case with metal caps on the corners, reinforcing along all edges, wooden runners parallel horizontally along the long sides of the case, and hinged lid with three metal clasps - the centre one has a keyhole. The interior of the case is divided into five compartments, the lar…
1 image
- Title
- Camera Equipment Case
- Date
- 1970 – 1985
- Material
- leather; wood; metal; fabric; plastic; glass
- Dimensions
- 31.0 x 30.2 x 59.5 cm
- Description
- Brown hard-sided travel case with metal caps on the corners, reinforcing along all edges, wooden runners parallel horizontally along the long sides of the case, and hinged lid with three metal clasps - the centre one has a keyhole. The interior of the case is divided into five compartments, the largest centre one has a false bottom accessed by a leather pull tab. There is a square of padding set into the centre of the lid, three equipment manuals are tucked into the right-hand side and the paper one is stuck. Inside the box is a 19.6x24.0x27.1 cm black box with a brown leather strap attached to the sides, a black leather handle on the lid, and a locking metal clasp on the hinged lid. This box is lined with blue velvet and contains various small pieces of camera equipment. Includes: power cord in a yellow fabric bag, micro screwdrivers in a yellow fabric bag, a metal and wood bracket in a white fabric bag, a “BRAUN” digital flash in a yellow fabric bag, an empty blue fabric bag, four metal Agfa film canisters (empty), assorted spacers and brackets, two keys (one in a paper envelope labelled “CASE KEY” in black ink), and various manuals in a plastic sleeve. Also inside the main case are two hard black lens cases - the larger one has a piece of masking tape on the bottom with “400” written in faded black ink and the smaller one has a piece of masking tape on the lid with “200” written in black ink - a metal and wood handle, a circular black plastic case with a black plastic lens cap inside, and a yellow filter in a clear plastic case. Both lens cases manufactured by “ASAHI OPT CO. JAPAN” as noted on the bottoms.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0096 a-g
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Camera Lens Case
https://archives.whyte.org/en/permalink/artifact104.41.0083%20a-c
- Date
- 1920 – 1999
- Material
- leather; metal; plastic; foam; fabric
- Catalogue Number
- 104.41.0083 a-c
- Description
- Black hard leather carry case with silver corner protectors and tarnished silver buckles and lock. The exterior of the case has remnants of shipping labels (and possibly other stickers) as well as painted red squares (approx. 7.5x6.5 cm) throughout the front and side panels - remnants of some large…
1 image
- Title
- Camera Lens Case
- Date
- 1920 – 1999
- Material
- leather; metal; plastic; foam; fabric
- Dimensions
- 27.0 x 35.8 x 62.8 cm
- Description
- Black hard leather carry case with silver corner protectors and tarnished silver buckles and lock. The exterior of the case has remnants of shipping labels (and possibly other stickers) as well as painted red squares (approx. 7.5x6.5 cm) throughout the front and side panels - remnants of some large red label remains on the lid. The side opposite the handle has 2 (two) parallel pieces of wood nailed on horizontally. The handle is wrapped entirely in black electrical tape, leaving the metal hoops exposed - hanging from both metal hoops are the strings and tops of various “CP Rail” shipping tags, as well as a large tag reading “MORANT COLLECTION J-8 ‘Long Takumar Lens for 6x7 work, 600 mm’ 1 of 2” written on it in black ink and attached with a plastic loop.The interior of the case is lined with black paper and contains several pieces of thick white foam along the sides and bottom. Also inside the case is a dual-sided weight that looks homemade, possibly filled with sand, as well as a purple Crown Royal bag containing several small pieces of photography equipment and tools. A manufacturer label inside the lid reads “G.R. TAYLOR LTD. TRUNKS AND SAMPLE CASES WINNIPEG” - no information about the manufacturer found online.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0083 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Camera Lens Case
https://archives.whyte.org/en/permalink/artifact104.41.0092%20a-f
- Date
- 1940 – 1980
- Material
- leather; wood; metal; glass; plastic; fabric
- Catalogue Number
- 104.41.0092 a-f
- Description
- Black hard-sided leather case with a hinged lid and a single central locking latch, unlocked with no key. A leather carry strap is attached to the short sides of the case with metal hooks - the strap is wrapped around the leather handle on the lid of the case, also attached with metal loops. Attach…
1 image
- Title
- Camera Lens Case
- Date
- 1940 – 1980
- Material
- leather; wood; metal; glass; plastic; fabric
- Dimensions
- 17.8 x 8.3 x 34.5 cm
- Description
- Black hard-sided leather case with a hinged lid and a single central locking latch, unlocked with no key. A leather carry strap is attached to the short sides of the case with metal hooks - the strap is wrapped around the leather handle on the lid of the case, also attached with metal loops. Attached with string to the metal loops of the handle are a leather travel name tag (on a piece of orange paper is printed “NICHOLAS MORANT BOX 1288 BANFF, ALBERTA CANADA”) and the remnants of a Canadian Pacific paper tag. The exterior of the case has a collection of travel stickers and labels, mostly worn and torn - some still legible are from Whitehouse (Yukon), Waterloo (Ontario), Anchorage (Alaska), and St. John’s (Newfoundland).The interior of the box is lined with dark purple velvet and the main body compartment is divided into two compartments, one larger than the other.Inside in the case are two black Dallmeyer (London) lenses, both have tubes and caps that fit over the ends. The larger one is inside a small black box lined with purple velvet and the smaller one is in a leopard-print drawstring bag. Also in the case are two larger filters, one yellow and one red, in their own individual red velvet bags, a small yellow filter inside a black and yellow plastic “KODAK” box, and a metal base covered in green felt on one side and black felt on the other.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0092 a-f
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1980
- Material
- metal; paper
- Catalogue Number
- 104.41.0131 a,b
- Description
- Two metal pieces with a Canadian Pacific Railway travel tag with “LEICA TANDEM THALHMER TOP” written in black ink on one side, probably by Morant. The pieces could be part of a mount used to connect two different cameras together.
1 image
- Title
- Camera Mount
- Date
- 1950 – 1980
- Material
- metal; paper
- Dimensions
- 3.0 x 12.5 x 14.5 cm
- Description
- Two metal pieces with a Canadian Pacific Railway travel tag with “LEICA TANDEM THALHMER TOP” written in black ink on one side, probably by Morant. The pieces could be part of a mount used to connect two different cameras together.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0131 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Catalogue Number
- 104.41.0081 a-d
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded suppor…
1 image
- Title
- Camera Tripod
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Dimensions
- 28.3 x 28.6 x 138.5 cm
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded supports and buckled leather straps located inside to keep the tripod in place - straps not done up at time of processing. NICHOLAS MORANT written in white along the narrow top edge on either side of carrying handle, TR1 written in yellow paint in the top left end of narrow edge and in top right corner of opening side, the torn remains on a Canadian Pacific Railway label remains on the side that does not open. Tripod: Manufacturer mark on metal support below the camera support base reads [D]INEMA EQUIPMENT CO. No manufacturer details available online. Tripod dimensions are 124.1x14.7x14.7 cm. The legs of the tripod are wood, with metal spikes at the bottoms, metal brackets, and a metal camera support rig [possibly cast iron]. The legs are held together with a buckled strip of leather at the bottom. Also in the case is a metal pole with a black plastic handle that can screw into the camera support base for use as a controller and a plastic zip-lock baggie containing a length of chain with 4 metal clasps throughout 286.0 cm in length.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0081 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- wood; plastic; metal; fabric
- Catalogue Number
- 104.41.1146 a-c
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using…
1 image
- Title
- Cut-Film Holder
- Date
- n.d.
- Material
- wood; plastic; metal; fabric
- Dimensions
- 1.4 x 14.9 x 22.7 cm
- Description
- 5x7 film holder, which held double sheets of film for use in large format cameras. The holder takes two sheets of film and fits all press and view cameras with the international spring back. 5x7 formats are among the less common used and are sometimes referred to as “ultra large format.” When using a sheet film holder, the device is inserted into the camera, often a view camera, and the dark slide is withdrawn, making the film available for exposure. After the exposure has been made, the dark slide is reinserted into the film holder, and the device is removed from the camera for later processing of the exposed film. Film loading using sheet film holders requires a dark space to load and unload the film; typically a changing bag or darkroom would be utilized to avoid compromising the film. However, 5x7 film holders were known for their primary use in the field, suggesting that a changing bag would have been used. (a)The film holder has been designed with the utmost durability and has a welded unibody construction to withstand normal dropping without damage. The holder consists of a metal handle on the darkslides, which make for easy handling and are considered to be more highly regarded as they are known to have a longer life. On the top of the holder’s body there are two black metal clips, which would have locked each sheet into place. Along the top of the holder, on both the front and back, a protruding inscription reads as follows: “5X7 LISCO CUT FILM HOLDER” “MADE IN U.S.A. BY PATS PENO” “LISCO PRODUCTS CO. GLENDALE 4, CALIF.” (b)At the top of the darkslide nothing has been attached to further identify it. (c)At the top of the darkslide a red ribbon has been tied.
- Subject
- photography
- Canadian
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1146 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Decorative; Dinner Plate
https://archives.whyte.org/en/permalink/artifact104.20.1148%20a%2cb
- Date
- n.d.
- Material
- ceramic; paint
- Catalogue Number
- 104.20.1148 a,b
- Description
- (a) A scalloped-edged white and rose dinner plate (26.0 radius) with indented grooves around the rim. The centre of the plate which is a transferred photograph is in colours of pink and rose on the white background. Three people are skiing in front of a mountain range in the Sunshine Valley.(b) A s…
1 image
- Title
- Decorative; Dinner Plate
- Date
- n.d.
- Material
- ceramic; paint
- Description
- (a) A scalloped-edged white and rose dinner plate (26.0 radius) with indented grooves around the rim. The centre of the plate which is a transferred photograph is in colours of pink and rose on the white background. Three people are skiing in front of a mountain range in the Sunshine Valley.(b) A scalloped-edged white and rose dinner plate (26.0 radius) with indented grooves around the rim. The centre of the plate which is a transferred photograph is in colours of pink and rose on the white background. Two skiers, viewer’s left, are stopped on a ledge in front of a bank of trees with the mountain range Temple,Victoria etc. behind. Both skiers are wearing backpacks and the man, viewer’s left, is pointing something in the distance, out to the woman, viewer’s right, with his ski pole
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.20.1148 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Decorative; Dinner Plate
https://archives.whyte.org/en/permalink/artifact104.20.1152
- Date
- n.d.
- Material
- ceramic
- Catalogue Number
- 104.20.1152
- Description
- A scalloped-edged white, charcoal and grey decorative dinner plate (26.0 radius) with indented grooves around the rim. The centre of the plate, which is a transferred photograph, is in colours of charcoal and grey on a white background. Two people are skiing on an expanse of snow in front of Moun…
1 image
- Title
- Decorative; Dinner Plate
- Date
- n.d.
- Material
- ceramic
- Description
- A scalloped-edged white, charcoal and grey decorative dinner plate (26.0 radius) with indented grooves around the rim. The centre of the plate, which is a transferred photograph, is in colours of charcoal and grey on a white background. Two people are skiing on an expanse of snow in front of Mount Assiniboine. Au verso printed in black “MOUNT ASSINIBOINE.” a black line, “WEDGEWOOD MADE IN ENGLAND OF ETRURIA & BARLASTON”. “WEDGEWOOD” has been stamped into the dish before glazing as well as something indiscernible. There is also a black dot with rays extending outwards, similar to a sun.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.20.1152
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.