Narrow Results By
- Date
- 1930 – 1940
- Material
- wood; metal
- Catalogue Number
- 108.04.1011
- Description
- Long varnished hickory staff with cast iron crook. Crook is painted black and designed to resemble tip of ibex horn. 8.5 cm metal collar around bottom with 4.0 sturdy spike at end. Stamped into bottom of collar "Geze Hulsenfitze L.P.F."
- Title
- Alpenstock
- Date
- 1930 – 1940
- Material
- wood; metal
- Dimensions
- 160.0 cm
- Description
- Long varnished hickory staff with cast iron crook. Crook is painted black and designed to resemble tip of ibex horn. 8.5 cm metal collar around bottom with 4.0 sturdy spike at end. Stamped into bottom of collar "Geze Hulsenfitze L.P.F."
- Credit
- Gift of George Vaux, Philadelphia, USA, 1972
- Catalogue Number
- 108.04.1011
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1919 – 1930
- Material
- wood; metal
- Catalogue Number
- 108.04.1013
- Description
- Long staff silvered with deeply eroded grain showing, 9.8 cm tapering metal collar around end with 3.5 cm long, sturdy, square spike set into bottom of staff.
- Title
- Alpenstock
- Date
- 1919 – 1930
- Material
- wood; metal
- Dimensions
- 145.0 cm
- Description
- Long staff silvered with deeply eroded grain showing, 9.8 cm tapering metal collar around end with 3.5 cm long, sturdy, square spike set into bottom of staff.
- Subject
- sports
- climbing
- Mount Cradock
- Credit
- Gift of Bernie Schiesser, Banff, 1978
- Catalogue Number
- 108.04.1013
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1940
- Material
- wood; metal
- Catalogue Number
- 108.04.1026 a,b
- Description
- Long wooden shafts with metal crooks and spikes. (a) Painted black crook, some paint worn off. 2.7 cm wide silver band with emblem of boot and alpenstock and SLTH CR, screwed on to shaft. "Birks Sterling" stamped on bottom edge, round spike. 8.6 wide metal collar, 2 copper nails at top edge. (b…
- Title
- Alpenstock
- Date
- 1930 – 1940
- Material
- wood; metal
- Dimensions
- 162.0 cm
- Description
- Long wooden shafts with metal crooks and spikes. (a) Painted black crook, some paint worn off. 2.7 cm wide silver band with emblem of boot and alpenstock and SLTH CR, screwed on to shaft. "Birks Sterling" stamped on bottom edge, round spike. 8.6 wide metal collar, 2 copper nails at top edge. (b) same as (a) but without silver band. "Geze Hulsenfitze C.P.F." stamped on metal spike end.
- Credit
- Gift of Joe A. Brewster, Banff, 1980
- Catalogue Number
- 108.04.1026 a,b
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1900 – 1950
- Material
- fibre
- Catalogue Number
- 103.04.1047
- Description
- Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
1 image
- Title
- Alpine Hat
- Date
- 1900 – 1950
- Material
- fibre
- Dimensions
- 13.0 x 20.0 x 26.0 cm
- Description
- Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
- Credit
- Gift of Fred Feuz, Salmon Arm, 1999
- Catalogue Number
- 103.04.1047
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- metal
- Catalogue Number
- 108.04.1165
- Description
- A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “LONGWARE” is engraved on the outside middle.
1 image
- Title
- Angle Piton
- Date
- n.d.
- Material
- metal
- Dimensions
- 2.70 x 15.0 cm
- Description
- A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “LONGWARE” is engraved on the outside middle.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1165
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- metal
- Catalogue Number
- 108.04.1166
- Description
- A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “HG” engraved on the inside along with “STUBAI AUSTRIA”
1 image
- Title
- Angle Piton
- Date
- n.d.
- Material
- metal
- Dimensions
- 2.0 x 15.5 cm
- Description
- A chromalloy steel, hand-forged, angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through. “HG” engraved on the inside along with “STUBAI AUSTRIA”
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1166
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1955
- Material
- metal
- Catalogue Number
- 108.04.1168
- Description
- A hand-forged, chromalloy steel, angle piton with a welded ring attached. Engraved “STUBAI” below that “MADE IN AUSTRIA” and then “HG”.
1 image
- Title
- Angle Piton
- Date
- 1955
- Material
- metal
- Dimensions
- 2.4 x 16.0 cm
- Description
- A hand-forged, chromalloy steel, angle piton with a welded ring attached. Engraved “STUBAI” below that “MADE IN AUSTRIA” and then “HG”.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1168
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- metal
- Catalogue Number
- 108.04.1169
- Description
- A chromalloy steel, hand-forged angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through.
1 image
- Title
- Angle Piton
- Date
- n.d.
- Material
- metal
- Dimensions
- 1.50 x 16.0 cm
- Description
- A chromalloy steel, hand-forged angle piton with a ring attached through a hole in the top portion to thread a carabiner or rope through.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1169
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Angle W/Carabiner Piton
https://archives.whyte.org/en/permalink/artifact108.04.1167%20a-d
- Date
- n.d.
- Material
- metal
- Catalogue Number
- 108.04.1167 a-d
- Description
- A carabiner with three pitons attached:(a) an aluminum D-ring carabiner (11.0X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a chr…
1 image
- Title
- Angle W/Carabiner Piton
- Date
- n.d.
- Material
- metal
- Description
- A carabiner with three pitons attached:(a) an aluminum D-ring carabiner (11.0X5.0cm wide) with non-locking gate mechanism on the gate; on one side engraved “H” and then “P. ALLAIN 1600 Kg” in raised block lettering,“G”, on opposite side in raised lettering, on the other “BREVETTE S G D G”.(b) a chromalloy steel, hand-forged, angle piton with a round hole at one end. Stamped on both sides is a diamond with a “C” in the middle.(c) A chromalloy steel, hand-forged, angle piton with a round hole at one end”AG” stamped on the inside.(d) A chromalloy steel, hand-forged, short, angle piton with a round hole at one end.
- Subject
- sports
- climbing
- Hans Gmoser
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
- Catalogue Number
- 108.04.1167 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1980
- Material
- fibre; metal
- Catalogue Number
- 103.05.1124
- Description
- A reversible (green one side and beige on the other), hooded, pullover jacket with diagonal pocket openings above the waist on both sides. The hood has a corded cotton drawstring threaded through to loosen or tighten and below there is an opening with three buttons at the neck. There are two slit p…
1 image
- Title
- Anorak Jacket
- Date
- 1950 – 1980
- Material
- fibre; metal
- Dimensions
- 66.0 x 92.0 hood 31.0 cm
- Description
- A reversible (green one side and beige on the other), hooded, pullover jacket with diagonal pocket openings above the waist on both sides. The hood has a corded cotton drawstring threaded through to loosen or tighten and below there is an opening with three buttons at the neck. There are two slit pocket opening with buttons to open and close, and a cord threaded through the bottom of the jacket to pull through for tightening. The cuffs have a flap with a button and hole to tighten around the wrists.
- Subject
- sports
- Hans Gmoser
- climbing
- Credit
- Gift of Hans and Margaret Gmoser, Harvie Heights, 1989
- Catalogue Number
- 103.05.1124
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.