Narrow Results By
Cowbell Bell, Animal
https://archives.whyte.org/en/permalink/artifact104.03.0001
- Date
- 1885 – 1910
- Material
- metal, brass
- Catalogue Number
- 104.03.0001
- Description
- A round brass bell made from a sheet of metal that has been bent and riveted into shape along the sides. The bell has a loop handle at the top.
1 image
- Title
- Cowbell Bell, Animal
- Date
- 1885 – 1910
- Material
- metal, brass
- Dimensions
- 19.0 x 9.0 x 15.0 cm
- Description
- A round brass bell made from a sheet of metal that has been bent and riveted into shape along the sides. The bell has a loop handle at the top.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.03.0001
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Cowbell Bell, Animal
https://archives.whyte.org/en/permalink/artifact104.03.0002
- Date
- 1885 – 1940
- Material
- metal, brass
- Catalogue Number
- 104.03.0002
- Description
- A brass bell that is cast in the shape of a truncated pyramid with a lug on top for hanging. There are bent metal eyes through the lug. The clapper is made of a single, heavy, piece of metal that hangs from a hook inside at the top.
1 image
- Title
- Cowbell Bell, Animal
- Date
- 1885 – 1940
- Material
- metal, brass
- Dimensions
- 6.0 x 3.7 x 4.9 cm
- Description
- A brass bell that is cast in the shape of a truncated pyramid with a lug on top for hanging. There are bent metal eyes through the lug. The clapper is made of a single, heavy, piece of metal that hangs from a hook inside at the top.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.03.0002
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Cowbell Bell, Animal
https://archives.whyte.org/en/permalink/artifact104.03.0003
- Date
- 1885 – 1940
- Material
- metal, brass
- Catalogue Number
- 104.03.0003
- Description
- A square, flattened, bell that is folded at the top. The bell is made from one sheet of metal folded into shape with a small loop handle at the top. The bell is riveted and braised on both sides. The bell’s clapper is a single light piece of metal that hangs from a large loop inside at the top.
1 image
- Title
- Cowbell Bell, Animal
- Date
- 1885 – 1940
- Material
- metal, brass
- Dimensions
- 4.5 x 2.7 x 4.6 cm
- Description
- A square, flattened, bell that is folded at the top. The bell is made from one sheet of metal folded into shape with a small loop handle at the top. The bell is riveted and braised on both sides. The bell’s clapper is a single light piece of metal that hangs from a large loop inside at the top.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.03.0003
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Cowbell Bell, Animal
https://archives.whyte.org/en/permalink/artifact104.03.0004
- Date
- 1885 – 1910
- Material
- metal, brass
- Catalogue Number
- 104.03.0004
- Description
- A long cylindrical brass bell made from a single sheet of metal that has been cut, folded and braised together at sides to form shape. There is a flat loop handle at the top of the bell. A rolled light metal clapper hangs from a hook inside the bell at the top.
1 image
- Title
- Cowbell Bell, Animal
- Date
- 1885 – 1910
- Material
- metal, brass
- Dimensions
- 8.0 x 3.5 x 4.0 cm
- Description
- A long cylindrical brass bell made from a single sheet of metal that has been cut, folded and braised together at sides to form shape. There is a flat loop handle at the top of the bell. A rolled light metal clapper hangs from a hook inside the bell at the top.
- Subject
- industry
- dairy
- farming
- Pearl Moore
- John Brewster
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.03.0004
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1880 – 1900
- Material
- metal; glass; rubber; fibre
- Catalogue Number
- 102.05.0060
- Description
- A coal miner's safety lamp, heavy brass base which acts as fuel chamber is surmounted by a glassed in cylinder protected by strong vertical shafts of wire. A brass ring atop them which supports, by steel shafts, a top plate with a large hook on it for hanging the lamp. Between the upper ring and th…
1 image
- Title
- Oil Lamp
- Date
- 1880 – 1900
- Material
- metal; glass; rubber; fibre
- Dimensions
- 24.5 x 9.2 x 11.0 cm
- Description
- A coal miner's safety lamp, heavy brass base which acts as fuel chamber is surmounted by a glassed in cylinder protected by strong vertical shafts of wire. A brass ring atop them which supports, by steel shafts, a top plate with a large hook on it for hanging the lamp. Between the upper ring and the top plate is a wire mesh cylinder which allows oxygen to feed the flame but which diffuses the heat rising from the flame. The lamp itself consists of a wick which draws fuel from the reservoir, and beside it is a small wire hook which can be operated from the bottom of the lamp base to extinguish the flame.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0060
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1880 – 1920
- Material
- metal
- Catalogue Number
- 102.05.0061
- Description
- A pitcher shaped container consisting of a small milk can like shape domed vessel with a long spout rising at an angle of 45 degrees from it. The top is sealed with a hinged, domed brass lid with a flange which can fit snugly into the brass ring neck of the vessel. A stout wire hook is soldered to …
1 image
- Title
- Oil Lamp
- Date
- 1880 – 1920
- Material
- metal
- Dimensions
- 8.0 x 4.4 x 10.8 cm
- Description
- A pitcher shaped container consisting of a small milk can like shape domed vessel with a long spout rising at an angle of 45 degrees from it. The top is sealed with a hinged, domed brass lid with a flange which can fit snugly into the brass ring neck of the vessel. A stout wire hook is soldered to the body of the vessel. “Treihawa Bros., Parsons, Pa” is stamped on side of vessel.
- Subject
- households
- industry
- mining
- Anthracite
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0061
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1880 – 1900
- Material
- metal; wood
- Catalogue Number
- 104.50.1005
- Description
- Wooden handled shovel with open hand grip, shallow metal blade rounded at bottom, straight shoulders and long socket for handle which is bolted through near top of socket. Short wood handle with D-shaped open hand grip at end, grip reinforced with metal rod through actual rounded grip, and another …
1 image
- Title
- Shovel
- Date
- 1880 – 1900
- Material
- metal; wood
- Dimensions
- 22,5 x 97.5 cm
- Description
- Wooden handled shovel with open hand grip, shallow metal blade rounded at bottom, straight shoulders and long socket for handle which is bolted through near top of socket. Short wood handle with D-shaped open hand grip at end, grip reinforced with metal rod through actual rounded grip, and another through just below opening. NB: wooden handle silvered and deeply weathered in grain of wood with large check splitting handgrip in half. 3.0 x 3.0 chunk of wood missing from back of grip. All metal heavily rusted, blade deeply pitted and corroded with 2.0 and .5 holes nearcentre.
- Subject
- industry
- mining
- Protection Mountain
- Credit
- Gift of Bernie Schiesser, Banff, 1983
- Catalogue Number
- 104.50.1005
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1880 – 1900
- Material
- metal
- Catalogue Number
- 104.50.1006
- Description
- 2 piece blade and ferrule, handle missing, shallow, rounded blade, straight shoulders. Ferrule is 2 pieces of rounded metal riveted to blade, the bottom ferrule is large and riveted onto blade with 5 rivets. 3 rivets connect the 2 pieces of ferrule.
1 image
- Title
- Shovel Blade
- Date
- 1880 – 1900
- Material
- metal
- Dimensions
- 23.5 x 45.5 cm
- Description
- 2 piece blade and ferrule, handle missing, shallow, rounded blade, straight shoulders. Ferrule is 2 pieces of rounded metal riveted to blade, the bottom ferrule is large and riveted onto blade with 5 rivets. 3 rivets connect the 2 pieces of ferrule.
- Credit
- Gift of Unknown, 1968
- Catalogue Number
- 104.50.1006
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.