Narrow Results By
- Date
- 1910 – 1930
- Material
- wood; metal; fibre
- Catalogue Number
- 104.49.1007
- Description
- Wooden frame, narrow blade. Handles are solid wood 4.0 x 1.2, rounded at the bottom to 3.0 dia. Shaped dowel through centre holds the blade, the dowels extend 7.5, crossbeam 2.5 square wood is mortised for handles to go through, top tension is thick string twisted to tighten with a 17.5 x 2.0 x 0.7…
1 image
- Title
- Bow Saw
- Date
- 1910 – 1930
- Material
- wood; metal; fibre
- Dimensions
- 33.5 x 83.0 cm
- Description
- Wooden frame, narrow blade. Handles are solid wood 4.0 x 1.2, rounded at the bottom to 3.0 dia. Shaped dowel through centre holds the blade, the dowels extend 7.5, crossbeam 2.5 square wood is mortised for handles to go through, top tension is thick string twisted to tighten with a 17.5 x 2.0 x 0.7 piece of wood, the blade is 0.6wide.
- Credit
- Gift of Vern (Mrs) Castella, Banff, 1970
- Catalogue Number
- 104.49.1007
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1915 – 1920
- Material
- metal
- Catalogue Number
- 102.05.0062
- Description
- A round brass cylinder carbide fuel container with a screw cap surmounted by a short-necked cylinder at right angles to the base which seems to be a "gas chamber." The upper cylinder has at its front end a dish reflector out of the centre of which protrudes a jet, and out of which also protrudes a …
1 image
- Title
- Carbide Lamp
- Date
- 1915 – 1920
- Material
- metal
- Dimensions
- 10.2 x 7.2 x 8.3 cm
- Description
- A round brass cylinder carbide fuel container with a screw cap surmounted by a short-necked cylinder at right angles to the base which seems to be a "gas chamber." The upper cylinder has at its front end a dish reflector out of the centre of which protrudes a jet, and out of which also protrudes a flint wheel spark generator for lighting the jet. Atop the cylinder is a tightly flanged hinged cap which can snap into place over and into an opening 2.0 x 1.5 cm oval; in front of the cap opening is a swivel device, probably for varying the flow through the jet. At the back of the cylinder is a hook mounted vertically by rivets and a clasp horizontally, for mounting the lamp on a miner's helmet. Marks:"Justrite/Pat, May 7, 1912/ Pat. Oct 28, 1913/ Pat. Nov 23, 1915/ Others Pending."
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0062
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Collection Mineral
https://archives.whyte.org/en/permalink/artifact112.03.1006%20a-c
- Date
- prior to 1980
- Material
- mineral, copper
- Catalogue Number
- 112.03.1006 a-c
- Description
- Three pieces of copper ore. Multi coloured and irregularly shaped (a) is 8.5 cm long and ca. 3.0 cm thick, (b) is similar while (c) if very small ca. 2.5 cm long and 0.8 cm thick.
1 image
- Title
- Collection Mineral
- Date
- prior to 1980
- Material
- mineral, copper
- Description
- Three pieces of copper ore. Multi coloured and irregularly shaped (a) is 8.5 cm long and ca. 3.0 cm thick, (b) is similar while (c) if very small ca. 2.5 cm long and 0.8 cm thick.
- Credit
- Gift of Bernie Schiesser, Banff, 1983
- Catalogue Number
- 112.03.1006 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1880 – 1900
- Material
- metal; glass; rubber; fibre
- Catalogue Number
- 102.05.0060
- Description
- A coal miner's safety lamp, heavy brass base which acts as fuel chamber is surmounted by a glassed in cylinder protected by strong vertical shafts of wire. A brass ring atop them which supports, by steel shafts, a top plate with a large hook on it for hanging the lamp. Between the upper ring and th…
1 image
- Title
- Oil Lamp
- Date
- 1880 – 1900
- Material
- metal; glass; rubber; fibre
- Dimensions
- 24.5 x 9.2 x 11.0 cm
- Description
- A coal miner's safety lamp, heavy brass base which acts as fuel chamber is surmounted by a glassed in cylinder protected by strong vertical shafts of wire. A brass ring atop them which supports, by steel shafts, a top plate with a large hook on it for hanging the lamp. Between the upper ring and the top plate is a wire mesh cylinder which allows oxygen to feed the flame but which diffuses the heat rising from the flame. The lamp itself consists of a wick which draws fuel from the reservoir, and beside it is a small wire hook which can be operated from the bottom of the lamp base to extinguish the flame.
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0060
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1880 – 1920
- Material
- metal
- Catalogue Number
- 102.05.0061
- Description
- A pitcher shaped container consisting of a small milk can like shape domed vessel with a long spout rising at an angle of 45 degrees from it. The top is sealed with a hinged, domed brass lid with a flange which can fit snugly into the brass ring neck of the vessel. A stout wire hook is soldered to …
1 image
- Title
- Oil Lamp
- Date
- 1880 – 1920
- Material
- metal
- Dimensions
- 8.0 x 4.4 x 10.8 cm
- Description
- A pitcher shaped container consisting of a small milk can like shape domed vessel with a long spout rising at an angle of 45 degrees from it. The top is sealed with a hinged, domed brass lid with a flange which can fit snugly into the brass ring neck of the vessel. A stout wire hook is soldered to the body of the vessel. “Treihawa Bros., Parsons, Pa” is stamped on side of vessel.
- Subject
- households
- industry
- mining
- Anthracite
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 102.05.0061
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Photographic Print
https://archives.whyte.org/en/permalink/artifact105.02.0125%20a-e
- Date
- 1870 – 1890
- Material
- paper
- Catalogue Number
- 105.02.0125 a-e
- Description
- Japanese scenes, pasted on to card. (a) "Ninagawa's house, Kioto. Inner gate and a very old tree planted about 300 years ago." plus Japanese writing, photograph 5.8 x 9.7 pasted on card 7.3 x 10.8. (b-e) prints 5.7 x 9.0 pasted on card 6.3 x 10.5, scenes of bridge construction, 2 over water, 2 ov…
1 image
- Title
- Photographic Print
- Date
- 1870 – 1890
- Material
- paper
- Description
- Japanese scenes, pasted on to card. (a) "Ninagawa's house, Kioto. Inner gate and a very old tree planted about 300 years ago." plus Japanese writing, photograph 5.8 x 9.7 pasted on card 7.3 x 10.8. (b-e) prints 5.7 x 9.0 pasted on card 6.3 x 10.5, scenes of bridge construction, 2 over water, 2 over land.
- Subject
- households
- hobbies
- photography
- Japanese;Edward S. Morse
- Edith Morse Robb
- industry
- construction
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 105.02.0125 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.