Narrow Results By
Candle; Darkroom Lamp
https://archives.whyte.org/en/permalink/artifact104.41.1126%20a-d
- Date
- 1910 – 1920
- Material
- canvas; metal; wax
- Catalogue Number
- 104.41.1126 a-d
- Description
- A Candle Lamp for use in a dark room. The foundation of the Candle Lamp consists of a square metal base (a) (8.5 X 8.5 X0.9 cm), which contains a raised circular ring that serves to hold the candle (b) (4.0 cm diameter X 1.0 cm height) in place. Once the lit candle is mounted on the metal base, the…
1 image
- Title
- Candle; Darkroom Lamp
- Date
- 1910 – 1920
- Material
- canvas; metal; wax
- Dimensions
- 15.5 x 8.8 x 8.5 cm
- Description
- A Candle Lamp for use in a dark room. The foundation of the Candle Lamp consists of a square metal base (a) (8.5 X 8.5 X0.9 cm), which contains a raised circular ring that serves to hold the candle (b) (4.0 cm diameter X 1.0 cm height) in place. Once the lit candle is mounted on the metal base, the collapsible red canvas housing (c) (15.2 X 8.0 X 0.5 cm) is raised around it and another square metal piece (d) (8.7 X 8.8 X0.7 cm) is placed on top. The top piece functions as a chimney and has circular opening in the center, allowing smoke to exit and air to enter the lamp in order to fuel the flame.Centered near the top on one face of the red canvas housing there is black text that reads: “THE KODAK CANDLE LAMP”; “MADE IN U.S.A. BY THE EASTMAN KODAK COMPANY ROCHESTER. N.Y”. At the bottom of this face, on the metal frame, is a silver sticker with a black border and black text that reads: “SOLE(?) DISTRIBUTOR(?) IN CANADA CANADIAN KODAK CO., LIMITED”. In the 1914 issue of the Kodak Catalogue, the cost of this candle lamp was $0.25.
- Subject
- Nicholas Morant
- darkroom
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1126 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1950
- Material
- wood; metal; plastic; glass;
- Catalogue Number
- 104.41.0163
- Description
- Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger su…
1 image
- Title
- Enlarger
- Date
- 1930 – 1950
- Material
- wood; metal; plastic; glass;
- Dimensions
- 105.0 x 44.5 x 55.7 cm
- Description
- Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger support to move up and down the support arm. The enlarger itself consists of a shiny metal dome with a fabric-wrapped power cord coming out the top [most likely the house for the light source] mounted on top of the grey metal frame [to which the enlarger support is attached] and into which several different negative trays can be fit, below the frame are dark grey fabric bellows that can be adjusted along a set of metal poles, the bottom of the bellows are attached to a smaller grey metal frame that also houses the focussing lens and a coloured filter that can be rotated in and out of frame.
- Subject
- Nicholas Morant
- photography
- photograph equipment
- camera equipment
- darkroom
- photograph developing;
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0163
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.