Skip header and navigation

Narrow Results By

33 records – page 1 of 4.

Date
n.d.
Material
metal; wood; paper; ink
Catalogue Number
104.48.1011 a-n
Description
A Kodak Studio scale (a), in original box (b) with lid (c).The box is sandy-brown in colour. On the viewer-right face of the box there is a sticker containing the text: “ONE KODAK STUDIO SCALE” “SOLE IMPORTER INTO CANADA CANADIAN KODAK CO., LIMITED TORONTO” “MADE IN UNITED STATES OF AMERICA BY EAST…
  1 image  
Title
Balance; Darkroom Scale
Date
n.d.
Material
metal; wood; paper; ink
Dimensions
11.0 x 11.0 x 24.0 cm
Description
A Kodak Studio scale (a), in original box (b) with lid (c).The box is sandy-brown in colour. On the viewer-right face of the box there is a sticker containing the text: “ONE KODAK STUDIO SCALE” “SOLE IMPORTER INTO CANADA CANADIAN KODAK CO., LIMITED TORONTO” “MADE IN UNITED STATES OF AMERICA BY EASTMAN KODAK COMPANY KOCHESTER, N.Y.” “Trade Mark Reg. U.S. Pat. Off.”“K P 4947D C-4016”There is a piece of paper glued to the inside of the box lid (c) that contains instructions for the user with the title: “IMPORTANT Balance the Scale Before Using”. The view-left side of the paper contains text in English, and the viewer-right side of the paper contains text in Spanish. The balance scale (a) is mounted on a rectangular, varnished wooden base (measuring 23.0 X 10.0 X 1.5 cm) and has three black, round plastic pads oriented in a triangular fashion on the bottom. The viewer-right side of the inner balance beam contains a semi-circle sticker with a black border and black text that reads: “SOLE IMPORTER INTO CANADA CANADIAN KODAK CO. LIMITED TORONTO”. There are two scale pans (d-e), each measuring 9.0 cm in diameter and containing a small, rounded handle with a hole drilled through the center.There are 6 metal weights (f-k) that have clearly come with the scale set, each engraved with their mass: “2 OZ.”, “1 OZ.”, “1/2 OZ”, “1/4 OZ.”, “50 GR.”, “50 GR.”. The weights are situated within a metal strip that is affixed to the bottom viewer-right side of the wood base. This metal strip contains the engraved text: “KODAK STUDIO SCALE FOR PHOTOGRAPHIC PURPOSES MADE BY EASTMAN KODAK CO. ROCHESTER, N.Y. U.S.A.” There are also three other weights (l-n) that were found within the box that do not seem to belong to the scale set, that are labeled “20” “30” “50” with blue ink.
Subject
Nicholas Morant
darkroom
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.48.1011 a-n
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
n.d.
Material
metal; paper; wood; tape; ink
Catalogue Number
104.48.1010 a-j
Description
Burke & James No. 8 Rexo laboratory scale (a), in original box (b).The outside of the box is black and textured, with black tape covering many of the edges. There is also tan-coloured tape along the bottom edges of the back and viewer-left and viewer-right faces of the box. Across the bottom of the…
  1 image  
Title
Balance Scale
Date
n.d.
Material
metal; paper; wood; tape; ink
Dimensions
10.5 x 11.0 x 24.0 cm
Description
Burke & James No. 8 Rexo laboratory scale (a), in original box (b).The outside of the box is black and textured, with black tape covering many of the edges. There is also tan-coloured tape along the bottom edges of the back and viewer-left and viewer-right faces of the box. Across the bottom of the viewer-right face of the box, the tan-coloured tape contains the text “PHOTO SCALES” in black marker.The box opens up (by lifting the top face up and back, which allows the front face of the box to open horizontally towards the viewer) to reveal the balance scale inside. These two openable faces are lined with a light-coloured paper on the inside of the box. The inside-top of the box contains text that reads:“REXO LABORATORY SCALE FOR QUICK AND ACCURATE WEIGHING” in black and orange font. Underneath this text, the Burke & James logo appears with the following text: “Burke & James Inc. Manufactures of Rexo Products CHICAGO” in black font. The inside-front face of the box contains text that reads: “FITTED WITH TIME SAVING BALANCE BEAM BOTH AVOIRDUPOIS AND METRIC SENSITIVE TO ONE GRAIN PENDULUM INDICATOR” in alternating black and orange font. The balance scale is mounted on a varnished wood base (measuring 22.0 X 9.5 X 1.5 cm). There are two scale pans (c-d), each measuring 9.0 cm in diameter and containing a small, rounded handle with a hole drilled through the center.There are 6 metal weights (e-j), each engraved with their mass: “2 OZ”, “1 OZ”, “1/2 OZ”, “1/4 OZ”, “50 GR”, “50 GR”. The weights are situated within a metal strip that is affixed to the bottom viewer-left side of the wood base. This metal strip contains the engraved text: “NO. 8 REXO SCALE-AVOIRDUPOIS BURKE & JAMES, INC. CHICAGO, ILL., U.S.A.”.
Subject
Nicholas Morant
photography
darkroom
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.48.1010 a-j
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1970
Material
leather; metal; glass; plastic; fabric; wood
Catalogue Number
104.41.0107 a,b
Description
Manufacturer details for Enlarger housed within box.Black equipment box with a hinged lid held closed with leather tabs/snaps as well as an olive green fabric strap wrapped around the box. The interior of the box is lined with blue velvet and has both plain wood and covered supports and braces thro…
  1 image  
Title
Camera Box
Date
1950 – 1970
Material
leather; metal; glass; plastic; fabric; wood
Dimensions
24.9 x 22.5 x 42.7 cm
Description
Manufacturer details for Enlarger housed within box.Black equipment box with a hinged lid held closed with leather tabs/snaps as well as an olive green fabric strap wrapped around the box. The interior of the box is lined with blue velvet and has both plain wood and covered supports and braces throughout. Contents of the box consists only of a Kodak Precision Enlarger with the open metal end capped with a cardboard box.
Subject
Nicholas Morant
photography
camera equipment
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0107 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1980
Material
leather; fabric; plastic; metal;
Catalogue Number
104.41.0137
Description
A grey plastic handheld flash with an expandable reflective disk in a black leather box lined with dark red velvet.The flash has a hook on the bottom where it can be fitted onto a camera, an articulated head where the reflective disk is, a distance gauge on the back [it was taped into a particular …
  1 image  
Title
Camera Flash
Date
1950 – 1980
Material
leather; fabric; plastic; metal;
Dimensions
4.2 x 5.5 x 12.0 cm
Description
A grey plastic handheld flash with an expandable reflective disk in a black leather box lined with dark red velvet.The flash has a hook on the bottom where it can be fitted onto a camera, an articulated head where the reflective disk is, a distance gauge on the back [it was taped into a particular position with a piece of clear tape that has since come unstuck], and a green plastic cord coming out of the front of the flash just below the disk.The box has a leather hinged lid and is held closed with a snap on a leather tab.
Subject
Nicholas Morant
photography
camera equipment
camera flash
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0137
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1910 – 1920
Material
canvas; metal; wax
Catalogue Number
104.41.1126 a-d
Description
A Candle Lamp for use in a dark room. The foundation of the Candle Lamp consists of a square metal base (a) (8.5 X 8.5 X0.9 cm), which contains a raised circular ring that serves to hold the candle (b) (4.0 cm diameter X 1.0 cm height) in place. Once the lit candle is mounted on the metal base, the…
  1 image  
Title
Candle; Darkroom Lamp
Date
1910 – 1920
Material
canvas; metal; wax
Dimensions
15.5 x 8.8 x 8.5 cm
Description
A Candle Lamp for use in a dark room. The foundation of the Candle Lamp consists of a square metal base (a) (8.5 X 8.5 X0.9 cm), which contains a raised circular ring that serves to hold the candle (b) (4.0 cm diameter X 1.0 cm height) in place. Once the lit candle is mounted on the metal base, the collapsible red canvas housing (c) (15.2 X 8.0 X 0.5 cm) is raised around it and another square metal piece (d) (8.7 X 8.8 X0.7 cm) is placed on top. The top piece functions as a chimney and has circular opening in the center, allowing smoke to exit and air to enter the lamp in order to fuel the flame.Centered near the top on one face of the red canvas housing there is black text that reads: “THE KODAK CANDLE LAMP”; “MADE IN U.S.A. BY THE EASTMAN KODAK COMPANY ROCHESTER. N.Y”. At the bottom of this face, on the metal frame, is a silver sticker with a black border and black text that reads: “SOLE(?) DISTRIBUTOR(?) IN CANADA CANADIAN KODAK CO., LIMITED”. In the 1914 issue of the Kodak Catalogue, the cost of this candle lamp was $0.25.
Subject
Nicholas Morant
darkroom
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.1126 a-d
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
n.d.
Material
wood; metal; paint
Catalogue Number
104.47.1011 a-b-c-d
Description
a. Carved wooden figure of an older man with a gold and red crown, a grey beard and grey hair. The figure is wearing a grey jacket with five buttons and painted on pockets full of presents with cream coloured wrapping and red ribbon. Additionally, he has a bag slung over one of his shoulders. His o…
  1 image  
Title
Decorative Clock
Date
n.d.
Material
wood; metal; paint
Dimensions
a. 33.2 b. 13.7 c. 3.6 d. 4.0 x a. 17.5 b. 5.2 c. 2.9 d. 1.1 x a. 10.9 b. 2.4 c. 0.2 d. 0.3 cm
Description
a. Carved wooden figure of an older man with a gold and red crown, a grey beard and grey hair. The figure is wearing a grey jacket with five buttons and painted on pockets full of presents with cream coloured wrapping and red ribbon. Additionally, he has a bag slung over one of his shoulders. His other arm is wrapped around a carved out hole that fits b inside of it. Back of figure is cut out and reveals internal mechanisms consisting of cogs, springs, wires, cylinders, and a kind of accordion contraption. The internal mechanism seems to be responsible for making the figure’s head turn from side to side. There’s a perfect sized hole between figure’s right thumb and forefinger for him to hold part c.b. A black clock-face that has a black background and black numbers inside circles of grey. Surrounding the clock-face itself is a scene of a green field with specks of white (snow?) and some dark green trees; a tan, cream, and black building; a black fence; and hills in the background. There is one cloud in the sky above. There are four gold, chain-link chimes that extend from the bottom of the clock.c. A silver key that fits into the front of the clock-face. d. A gold metal hook with a pentagon of thick, gold metal wrapped around the non-hooked side. Function unclear.
Subject
Nicholas Morant
clock
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.47.1011 a-b-c-d
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
n.d.
Material
metal
Catalogue Number
104.41.1153 a-c
Description
Three rectangular photo-processing trays (a-c); they are white with a blue trim along the lip and have a pouring spout at one corner.
  1 image  
Title
Developing Tray
Date
n.d.
Material
metal
Dimensions
5.0 x 25.0 x 31.0 cm
Description
Three rectangular photo-processing trays (a-c); they are white with a blue trim along the lip and have a pouring spout at one corner.
Subject
Nicholas Morant
photography
darkroom
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.1153 a-c
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1868
Material
metal
Catalogue Number
104.41.1133 a-i
Description
Dallan metal developing tank (a) for six 5X7 inch plates, with removable lid (b) that attaches to the body of the tank with two metal fasteners. On the back face of the tank, near the center at the bottom, there is a rectangular box stamped into the metal with text inside that reads: “MADE IN GREAT…
  1 image  
Title
Developing Tank
Date
1868
Material
metal
Dimensions
20.5 x 8.0 x 13.5 cm
Description
Dallan metal developing tank (a) for six 5X7 inch plates, with removable lid (b) that attaches to the body of the tank with two metal fasteners. On the back face of the tank, near the center at the bottom, there is a rectangular box stamped into the metal with text inside that reads: “MADE IN GREAT BRITAIN”(?). On the top face of the lid, there is raised text which reads: “DALLAN DEVELOPING TANK”. Inside the developing tank, there is a removable tray (c) with six removable plate-holders(d-i).
Subject
Nicholas Morant
darkroom
photography
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.1133 a-i
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1868
Material
metal
Catalogue Number
104.41.1134 a-o
Description
Dallan metal developing tank (a) for twelve quarter-plates, with removable lid (b) that attaches to the body of the tank with two metal fasteners. On the back face of the tank, near the center at the bottom, there is a rectangular box stamped into the metal with text inside that reads: “MADE IN GRE…
  1 image  
Title
Developing Tank
Date
1868
Material
metal
Dimensions
14.5 x 10.0 x 18.0 cm
Description
Dallan metal developing tank (a) for twelve quarter-plates, with removable lid (b) that attaches to the body of the tank with two metal fasteners. On the back face of the tank, near the center at the bottom, there is a rectangular box stamped into the metal with text inside that reads: “MADE IN GREAT BRITAIN”. On the top face of the lid, there is raised text stamped into the metal which reads: “DALLAN DEVELOPING TANK”. The body of the tank contains a spout on the viewer-left face. Inside the developing tank, there is a removable tray (c) with twelve removable plate-holders(d-o).
Subject
Nicholas Morant
darkroom
photography
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.1134 a-o
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
n.d.
Material
metal
Catalogue Number
104.41.1136 a-b
Description
A Kodak film developing tank (a) with removable lid (b). On top of the lid, stamped into the metal is the text: “FILM KODAK TANK C”. The circumference of the lid has diagonal lines etched into the metal in order for the user to better grip and remove the lid.On the bottom of the tank, there is text…
  1 image  
Title
Developing Tank
Date
n.d.
Material
metal
Dimensions
15.5 cm
Description
A Kodak film developing tank (a) with removable lid (b). On top of the lid, stamped into the metal is the text: “FILM KODAK TANK C”. The circumference of the lid has diagonal lines etched into the metal in order for the user to better grip and remove the lid.On the bottom of the tank, there is text which follows the circumference that reads: “MANUFACTURED BY EASTMAN KODAK CO. ROCHESTER, N.Y. PAT. AUG. 26. 02. MAY. 23. 05. MAY. 21. 07. SEP. 17. 07.”
Subject
Nicholas Morant
photography
darkroom
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.1136 a-b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

33 records – page 1 of 4.

Back to Top