- Date
- 1940 – 1960
- Material
- glass; paper
- Catalogue Number
- 104.41.1128 a-c
- Description
- Kodak 3-inch square filter with original box. (a) The original box consists of a top (lid) and a bottom. The top of the yellow coloured box is square and measures 8.2cm x 8.2cm, which is slightly larger than the 3-inch filter allowing the box to safely store the object. On the face of the lid “Koda…
1 image
- Title
- Filter
- Date
- 1940 – 1960
- Material
- glass; paper
- Dimensions
- (a) 1.9; (b) 1.7; (c) 0.425 x (a) 8.3; (b) 8.0; (c) 7.6 x (a) 8.3; (b) 8.0; (c) 7.6 cm
- Description
- Kodak 3-inch square filter with original box. (a) The original box consists of a top (lid) and a bottom. The top of the yellow coloured box is square and measures 8.2cm x 8.2cm, which is slightly larger than the 3-inch filter allowing the box to safely store the object. On the face of the lid “Kodak” has been written inside of a red coloured box, which is attached to a black coloured box with the word “filter” written inside. Below this “3-INCH SQUARE” has been (machine) printed in black lettering. Along the viewer left and right sides of the box a half circular cutout is present to allow for easier removal of the box’s lid. Much like the face of the box lid, the front side of the box also has the company name “Kodak” written inside of the red coloured box, which is attached to a black coloured box with the word “filter” printed inside. Next to the company and product names “3-INCH SQUARE” is (machine) printed in black lettering. Below this an ink stamp has been applied, possibly by Nick himself, and reads: “N.D.03.” This stamp has been smudged slightly distorting the mark, although it is still legible. This code symbolizes the colour of the filter, which is a deep neutral slightly warm grey colour that has a neutral density to reduce very bright sunlight, which has a fine mark from bonding agent breakdown. The back of the lid has all of the manufacturer information in red which reads: “EASTMAN KODAK COMPANY” “MADE IN ROCHESTER N.Y. U.S.A. T.M. REGISTERED U.S. PAT. OFF.” On the inside of the lid, on the same side as the manufacturer information, “Code No. 4767” “KP 51378” “printed in U.S.A.” has been (machine) printed. When looking at the inside of the lid it becomes apparent that the information on the boxes lid would have been printed as a whole on the glossy-style paper before being adhered to the cardboard lid. (b)The bottom of the filter’s case is made from plain black cardboard that contains no writing. The inside of the box’s bottom does have a cushioned material that would have supported the object and eliminated any concerns of scratching. (c) The Kodak filter would have been used for printing onto UV sensitive papers. The glass filter absorbs light and only transmits the UV radiation to sharpen prints. The filter measures approximately 7.6cm or 3-inches. Around the edges of the clear glass is a black border. At the top of the border the words: “DEN. 0.30” has been painted in gold, which represents the colour code of the filter. Along the bottom of the border the letter “V” has been painted in gold. This information has also been written on the reverse of the object.
- Subject
- photography
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1128 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1940 – 1960
- Material
- glass; paper; ink
- Catalogue Number
- 104.41.1129 a-c
- Description
- Kodak 3-inch square Wratten filter with original box.(a) The original box consists of a top (lid) and a bottom. The top of the yellow coloured box is square and measures 8.2cm x 8.2cm, which is slightly larger than the 3-inch filter allowing the box to safely store the object. The face of the lid c…
1 image
- Title
- Filter
- Date
- 1940 – 1960
- Material
- glass; paper; ink
- Dimensions
- (a) 1.9; (b) 1.7; (c) 0.425 x (a) 8.3; (b) 8.0; (c) 7.6 x (a) 8.3; (b) 8.0; (c) 7.6 cm
- Description
- Kodak 3-inch square Wratten filter with original box.(a) The original box consists of a top (lid) and a bottom. The top of the yellow coloured box is square and measures 8.2cm x 8.2cm, which is slightly larger than the 3-inch filter allowing the box to safely store the object. The face of the lid contains the following words: “Kodak” “WRATTEN FILTER” “(IN B GLASS)” which has been (machine) printed. Below this the manufacturer information has been printed and reads: “MADE IN ROCHESTER, N.Y., U.S.A. BY” “EASTMAN KODAK COMPANY” “T.M. REGISTERED U.S. PAT. OFF.” Along the viewer left and rights side of the box a half circular cutout is present to allow for easier removal of the box’s lid. Both the front and back of the box has the company name, “Kodak” “WRATTEN FILTER” (machine) printed. An ink stamp has been hand applied, possibly by Nick Morant himself, to both the front and back of the box`s edges and reads: “85C” “3** Sq.” “Code 4417” “KP 34344B” “Printed in U.S.A.” in black letters. The code 85C represents the colour code, which would have been a light orange and would have helped correct bluish casts that often occur when photographing outdoors. The 85C series filter would have decreased the colour temperature from 5500-3800 degrees Kelvin. When looking at the inside of the lid it becomes apparent that the original material used for the structural security of the box would have been covered in a paper that would have had the information, specified above, printed on glossy-style paper before meticulously being adhered to the lid. Also on the inside of the lid in blue pen “85-C Daylite Filter for Type F Kodachrome on Ektachrome Type F`s.” has been written, possibly by Nicholas Morant. (b) The bottom of the box has the plain white cardboard with a black covering that contains no writing. The inside of the box’s bottom no longer has the original cushioned material that would have supported the object. Several folded and layered pieces of cotton-style tissue have been neatly ordered to prevent scratching to the objects’ surface. (c) The Kodak filter would have been used for printing onto UV sensitive papers. The glass filter absorbs light and only transmits the UV radiation to sharpen prints. The filter measures approximately 7.6 cm or 3 inches. Around the edges of the clear glass is a black border. At the top of the border the words: “FILTER NO. 85C” has been painted in gold. Along the viewer left side of the object there is also three straight lines in gold. Both of these patterns are mirrored on the reverse of the filter.
- Subject
- photography
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1129 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1940 – 1960
- Material
- glass; paper; ink
- Catalogue Number
- 104.41.1130 a-c
- Description
- Kodak 3-inch square Wratten filter with original box.(a) The original box consists of a top (lid) and a bottom. The top of the yellow coloured box is square and measures 8.2 cm x 8.2 cm, which is slightly larger than the 3-inch filter allowing the box to safely store the object. The face of the lid…
1 image
- Title
- Filter
- Date
- 1940 – 1960
- Material
- glass; paper; ink
- Dimensions
- (a) 1.9; (b) 1.7; (c) 0.425 x (a) 8.3; (b) 8.0; (c) 7.6 x (a) 8.3; (b) 8.0; (c) 7.6 cm
- Description
- Kodak 3-inch square Wratten filter with original box.(a) The original box consists of a top (lid) and a bottom. The top of the yellow coloured box is square and measures 8.2 cm x 8.2 cm, which is slightly larger than the 3-inch filter allowing the box to safely store the object. The face of the lid contains the following words: “Kodak” “WRATTEN FILTER” “(IN B GLASS)” which has been printed. Above the company logo a yellow sticker has been adhered and reads: “SOLE IMPORTER INTO CANADA” “CANADIAN KODAK CO., LIMITED” “TORONTO” in blue letters. Handwritten in blue pen on the viewer right side of “(IN B GLASS)” the filter colour code “#81EF” has been written; on the viewer right side of the same part “31”Sq” has been written. Below this the manufacturer information has been printed and reads: “MADE IN ROCHESTER, N.Y., U.S.A. BY” “EASTMAN KODAK COMPANY” “T.M. REGISTERED U.S. PAT. OFF.” Along the viewer left and rights side of the box a half circular cut-out is present to allow for easier removal of the box’s lid. The front of the box has the company name, “Kodak” “WRATTEN FILTER” printed. Handwritten in blue pen “#81EF” and “31”Sq” have been applied to the box. The code 81EF represents the colour code, which would have been a light balancing yellow and would have enabled minor adjustments in the colour quality of illumination to obtain cooler bluish or warmer yellowish colour rendering. When looking at the inside of the lid it becomes apparent that the original material used for the structural security of the box would have been covered in a paper that would have had the information, specified above, printed on glossy-style paper before meticulously being adhered to the lid. Also on the inside of the lid, in what has been referred previously as the back of the box, the Kodak company has printed “CODE 4417” “KP 34344A.” (b) The bottom of the box has the plain paper material with a black covering that contains no writing. The inside of the box’s bottom have a cushioned material that supports the object eliminating the possibility of scratching. (c) The Kodak filter would have been used for printing onto UV sensitive papers. The glass filter absorbs light and only transmits the UV radiation to sharpen prints. The filter measures approximately 7.6 cm or 3 inches. Around the edges of the clear glass is a black border. At the top of the border the words: “FILTER NO. 81EF” has been painted in gold. Along the viewer left side of the object there is another figure possibly an “I” or “1”also in gold, but is difficult to make out with any degree of certainty. Both of these patterns are mirrored on the reverse of the filter.
- Subject
- photography
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1130 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1840 – 1970
- Material
- silver; metal
- Catalogue Number
- 104.20.1150 a-e
- Description
- 5 piece heavy weight silver plated tea set consisting of a serving tray, tea pot, sugar bowl, creamer, and bowl. All pieces have the script-style “C.P.R.” monogram engraved. While all pieces were manufactured by Elkington belonging together as a set, they do contain different maker’s marks. George …
1 image
- Title
- Tea Set
- Date
- 1840 – 1970
- Material
- silver; metal
- Dimensions
- (a) 1.4; (b) 13.0; (c) 8.8; (d) 9.4; (e) 5.3 x (a) 22.8; (b) 7.0; (c) 7.2; (d) 5.3: (e) 12.3 x (a) 30.9; (b) 17.0; (c) 15.6; (d) 11.0; (e) 12.3 cm
- Description
- 5 piece heavy weight silver plated tea set consisting of a serving tray, tea pot, sugar bowl, creamer, and bowl. All pieces have the script-style “C.P.R.” monogram engraved. While all pieces were manufactured by Elkington belonging together as a set, they do contain different maker’s marks. George Richards Elkington was a manufacturer from Birmingham and is credited as the first person to patent the first commercial electroplating process.(a) A large oval-shaped serving tray engraved in early script with “C.P.R.” along the top edge. Also engraved in the same style of writing are the words “For “Willie” Morant from the staff of Canadian Pacific Corporate Archives 1 June 1981.” On rear the number “8960” has been stamped with a shield logo below that contains the letters “E & Co,” which is representative of the name Elkington. Below the shield logo are three separate hallmark; the first is “C” followed by “&” and “Co”. Below this in protruding letters is the name of the manufacturer “ELKINGTON” “PLATE” each blocked off in its own box. “A.T. WILEY Coy LIMITED MONTREAL” is inscribed. (b) Tea pot with an oval shape body and hinged lid. On the front of the teapot the “CPR” monogram has been engraved. On the teapots bottom there is the number “15167”with a shield logo below that contains the letters “E & Co.” Below the shield logo are three separate hallmarks; “C” followed by “&” and “Co”. Below this in protruding letters is the name of the manufacturer “ELKINGTON” “PLATE” each blocked off in its own box. There is also the letter “T” inside of a (c) The round, double handed sugar bowl has a hinged lid. On the front of the teapot the “CPR” monogram has been engraved. On the bottom of the sugar bowl the number “1” has been engraved inside of a circle. Beneath this are a series of numbers “15167.” A shield logo with the “&” is present above the letters “C,” “E & Co” and “Co.” “U” “46” also has been marked. “Elkington & Co” is engraved below. “A. T. WILEY Coy LIMITED” “MONTREAL” is engraved at the very bottom. (d) The round, cream pitcher has a hinged lid. The stamped marks on the bottom are as follows: "15167” followed by “&,” “E & Co.” (in a shield logo), “Co” “U.” Below this the manufacturer name reads: “Elkington & Co” is engraved below these marks. Following this is the location of manufacturing: “A. T. WILEY Coy LIMITED” “MONTREAL” is engraved at the very bottom. (e) The bowl has stamped marks on the bottom that are as follows: “1” (enclosed in a circle; "19842”; “&,” “C,” “E & Co.” (in a shield logo), “Co.,” and “R.” “Below this the manufacturer name reads: “Elkington & Co” is engraved below these marks. “A. T. WILEY Coy LIMITED” “MONTREAL” is engraved at the very bottom. Following this is the location of manufacturing: “A. T. WILEY Coy LIMITED” “MONTREAL” is engraved at the very bottom.
- Subject
- railway
- silverware
- decorative
- CPR
- Nick Morant
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.20.1150 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.