Narrow Results By
- Date
- 1920 – 1999
- Material
- leather; fabric; metal; wood; paper
- Catalogue Number
- 104.41.0087
- Description
- Burgundy leather hard-sided travel case for Leica camera accessories. The case looks like a standard briefcase, with leather caps on the corners and two locking clasps, one on either side of the handle, which is still wrapped in paper. Throughout the exterior are black and silver metal studs either…
1 image
- Title
- Camera Case
- Date
- 1920 – 1999
- Material
- leather; fabric; metal; wood; paper
- Dimensions
- 10.6 x 26.2 x 41.5 cm
- Description
- Burgundy leather hard-sided travel case for Leica camera accessories. The case looks like a standard briefcase, with leather caps on the corners and two locking clasps, one on either side of the handle, which is still wrapped in paper. Throughout the exterior are black and silver metal studs either holding the corner protectors in place or the interior dividing compartments. The interior of the lid is lined with red and white plaid paper and the main body of the case is lined with thin pale wood. Throughout the interior are wooden pieces meant to separate accessories, some of the pieces are covered with burgundy velvet. There is a small metal ring with two keys for the latches’ locks hanging from the handle.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0087
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1999
- Material
- leather; metal; fabric; paper
- Catalogue Number
- 104.41.0088
- Description
- A travel case made from some hard light-weight black material (possibly metal) with a hinged lid that closes with metal latches on either side of a latched lock. Metal brackets on all of the corners and reinforcing along all edges - wooden runners along the bottom of the case horizontally. There is…
1 image
- Title
- Camera Case
- Date
- 1920 – 1999
- Material
- leather; metal; fabric; paper
- Dimensions
- 36.2 x 34.4 x 16.5 cm
- Description
- A travel case made from some hard light-weight black material (possibly metal) with a hinged lid that closes with metal latches on either side of a latched lock. Metal brackets on all of the corners and reinforcing along all edges - wooden runners along the bottom of the case horizontally. There is a leather strap that clips into loops on the short sides of the box as well as a leather travel tag. Attached to the leather strap is a yellow Canadian Pacific Railway travel tag with a piece of string. Throughout the exterior are various travel labels, mostly torn. On the lid is a white rectangular “Canadian Pacific” label that reads “Nicholas Morant, Special Photographer Canadian Pacific Ltd. care CP Transport” in typed text and “Banff Alta” written in black ink above a scratched out typed “Victoria, B.C.” Also on the lid is a piece of masking tape with “LEICA & FILM & ACCESSORIES” written in blue ink possibly by Nick Morant. The interior is lined with beige fabric and both the main body and the interior of the lid are divided into two equal compartments. In one of the body compartments are wooden slats that most likely sit on supports inside each part to create additional compartments at the bottom of the case, but they are not in place. The compartments in the lid are held closed with small pieces of leather that snap onto the front panels which hinge down on strips of brown fabric tape. Inside the case and lid compartments are a Leica camera and various accessories,
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0088
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Camera Lens Case
https://archives.whyte.org/en/permalink/artifact104.41.0083%20a-c
- Date
- 1920 – 1999
- Material
- leather; metal; plastic; foam; fabric
- Catalogue Number
- 104.41.0083 a-c
- Description
- Black hard leather carry case with silver corner protectors and tarnished silver buckles and lock. The exterior of the case has remnants of shipping labels (and possibly other stickers) as well as painted red squares (approx. 7.5x6.5 cm) throughout the front and side panels - remnants of some large…
1 image
- Title
- Camera Lens Case
- Date
- 1920 – 1999
- Material
- leather; metal; plastic; foam; fabric
- Dimensions
- 27.0 x 35.8 x 62.8 cm
- Description
- Black hard leather carry case with silver corner protectors and tarnished silver buckles and lock. The exterior of the case has remnants of shipping labels (and possibly other stickers) as well as painted red squares (approx. 7.5x6.5 cm) throughout the front and side panels - remnants of some large red label remains on the lid. The side opposite the handle has 2 (two) parallel pieces of wood nailed on horizontally. The handle is wrapped entirely in black electrical tape, leaving the metal hoops exposed - hanging from both metal hoops are the strings and tops of various “CP Rail” shipping tags, as well as a large tag reading “MORANT COLLECTION J-8 ‘Long Takumar Lens for 6x7 work, 600 mm’ 1 of 2” written on it in black ink and attached with a plastic loop.The interior of the case is lined with black paper and contains several pieces of thick white foam along the sides and bottom. Also inside the case is a dual-sided weight that looks homemade, possibly filled with sand, as well as a purple Crown Royal bag containing several small pieces of photography equipment and tools. A manufacturer label inside the lid reads “G.R. TAYLOR LTD. TRUNKS AND SAMPLE CASES WINNIPEG” - no information about the manufacturer found online.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0083 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1945
- Material
- wood; metal; glass; plastic;
- Catalogue Number
- 104.41.0170
- Description
- Black and silver metal Leitz negative enlarger mounted on a wooden base. The enlarger consists of an almost round light housing with the power cord coming out from the top - immediately below the globe is a series of plates containing the various filters and lenses, as well as the mounting gear tha…
1 image
- Title
- Enlarger
- Date
- 1920 – 1945
- Material
- wood; metal; glass; plastic;
- Dimensions
- 95.8 x 41.7 x 51.9 cm
- Description
- Black and silver metal Leitz negative enlarger mounted on a wooden base. The enlarger consists of an almost round light housing with the power cord coming out from the top - immediately below the globe is a series of plates containing the various filters and lenses, as well as the mounting gear that attaches the enlarger to the silver metal stand. The enlarger is attached to the stand with adjustable arms and a spring that can be released with a small lever so that the device can be moved closer to or further away from the wooden base.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0170
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Film Magazine Case
https://archives.whyte.org/en/permalink/artifact104.41.0085
- Date
- 1920 – 1940
- Material
- leather; fabric; metal; paper
- Catalogue Number
- 104.41.0085
- Description
- Black hard-sided leather case with a hinged lid that clasps shut with two metal clasps on either side of a metal hinge lock and metal corner braces. There are two metal bases attached to the lid where a handle may have been attached, handle missing. Faded leather strap is attached with metal clasps…
1 image
- Title
- Film Magazine Case
- Date
- 1920 – 1940
- Material
- leather; fabric; metal; paper
- Dimensions
- 27.7 x 34.1 cm
- Description
- Black hard-sided leather case with a hinged lid that clasps shut with two metal clasps on either side of a metal hinge lock and metal corner braces. There are two metal bases attached to the lid where a handle may have been attached, handle missing. Faded leather strap is attached with metal clasps to rings mounted on both short sides of the case. There is a small square sticker, possibly a travel marker from Mexico, on the left-hand short side under the clasp. In the middle of the lid is a rectangular Canadian Pacific label that has “Film Case” written in black ink and a stamped “PROPERTY OF NICHOLAS MORANT BANFF, ALBERTA” in blue ink. Attached with a short piece of white string to the right-hand carry strap clasp is a paper Canadian Pacific tag that has something written in black ink that is badly damaged by water. A cataloguer tag is also attached to that clasp with “MORANT COLLECTION (film magazines)” written on it in black ink.The interior of the box is lined with a dark red fabric, possibly velvet and is divided into two compartments, the left one slightly larger than the right. The interior of the lid is also divided into two compartments that close off with snaps - small leather pull tabs allowed the compartments to be accessed. There are no manufacturer’s marks on the case. Found inside are three different film magazines.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0085
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1940
- Material
- metal; leather; plastic; celluloid
- Catalogue Number
- 104.41.0086 a-c
- Description
- Three black metal and leather “GRAFLEX CUT FILM MAGAZINE,” used to store individual celluloid negatives mounted into individual sleeves housed inside the main body. Access to the main body is possible by removing the the thin back panel with a leather strap that slides up alongside the leather bag …
1 image
- Title
- Film Magazines
- Date
- 1920 – 1940
- Material
- metal; leather; plastic; celluloid
- Dimensions
- 11.0 x 3.5 x 6.5 cm
- Description
- Three black metal and leather “GRAFLEX CUT FILM MAGAZINE,” used to store individual celluloid negatives mounted into individual sleeves housed inside the main body. Access to the main body is possible by removing the the thin back panel with a leather strap that slides up alongside the leather bag as well by pressing a button on the edge opposite the leather bag, allowing the front panel to pop open. On the front panel that can pop off is a small peephole accessible by a spring-hinged cover. Two of the magazines, marked with a red and a white strip of fabric, have the front panels taped closed with a small piece of masking tape.The three magazines are meant for different kinds of film. The one marked with a small strip of green fabric is meant for “KODAK EXTACOLOR Professional Type S (Short Exposure),” the one marked with the red fabric is meant for “KODAK EKTACHROME Film 6116, Type B (Process E-3),” and the one marked with the white fabric is meant for “KODAK TRI-X PAN SHEET FILM (ESTAR Thick Base).” The individual slides housed inside the magazine with the green fabric may have unprocessed fogged negatives still in them.
- Subject
- Nicholas Morant
- photography
- Kodak
- film photography
- photo developing
- Canadian Pacific Railway
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0086 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Projector Case
https://archives.whyte.org/en/permalink/artifact104.41.0084
- Date
- 1920 – 1999
- Material
- leather; wood; metal
- Catalogue Number
- 104.41.0084
- Description
- Black hard leather travel case with tarnished metal corners, 3 (three) metal clasps, a soft leather handle on the lid, and wood runners nailed to the long sides of the case (one on each side) horizontally. Remnants of paper labels adhered to the lid and the left-hand side.The interior is lined with…
1 image
- Title
- Projector Case
- Date
- 1920 – 1999
- Material
- leather; wood; metal
- Dimensions
- 36.0 x 20.5 x 75.6 cm
- Description
- Black hard leather travel case with tarnished metal corners, 3 (three) metal clasps, a soft leather handle on the lid, and wood runners nailed to the long sides of the case (one on each side) horizontally. Remnants of paper labels adhered to the lid and the left-hand side.The interior is lined with a tan coloured fabric, inside the lid is padded. The interior is divided into 2 (two) equal-sized compartments designed to hold the various parts of the magic lantern, including a hidden compartment in the bottom left-hand compartment for extra lenses, lightbulbs, etc. A manufacturer label is adhered to the left-hand side of the interior divider that reads “G.R. TAYLOR LTD. TRUNKS AND SAMPLE CASES WINNIPEG” - no manufacturer details found online.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0084
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Sheet Film Holder
https://archives.whyte.org/en/permalink/artifact104.41.1271%20a-d
- Date
- 1928 – 1946
- Material
- wood; metal
- Catalogue Number
- 104.41.1271 a-d
- Description
- black painted wooden double film holder with a metal septum in the middle and two dark slides with handles, one on each side, inserted in a recess and held by rivets; engraved on the wooden frame: “3 1/4 x 4 1/4 GRAFLEX FILM / FOLMER GRAFLEX CORP. U.S.A.” on one side and on the other side the paten…
1 image
- Title
- Sheet Film Holder
- Date
- 1928 – 1946
- Material
- wood; metal
- Dimensions
- 10.4 x 15.8 cm
- Description
- black painted wooden double film holder with a metal septum in the middle and two dark slides with handles, one on each side, inserted in a recess and held by rivets; engraved on the wooden frame: “3 1/4 x 4 1/4 GRAFLEX FILM / FOLMER GRAFLEX CORP. U.S.A.” on one side and on the other side the patent number: “U.S. PAT. 1631479 1641420 2056144”; stored in a blue faux leather covered cardboard box with white, golden and blue label reading: “3 1/4 x 4 1/4 CUT FILM MAGAZINE / GRAFLEX / MANUFACTURED BY GRAFLEX, INC., ROCHESTER 8, NEW YORK, U.S.A”; in pencil, the number 40.25 has been added above the printed label;a) has a piece of white tape stuck to one of its handles
- Subject
- Nicholas Morant
- photography
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.1271 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1960
- Material
- metal; fabric;
- Catalogue Number
- 102.05.0123 a-d
- Description
- Four heavy-duty black metal spotlights consisting of a round body containing the light bulb and fronted by a clear beveled crystal, a rectangular box extends from one side of the body and houses the power switch and cable, on the side opposite the power box is a handle, and a Y-shaped support stand…
1 image
- Title
- Spot Lights
- Date
- 1920 – 1960
- Material
- metal; fabric;
- Dimensions
- 168.5 x 42.4 x 43.5 cm
- Description
- Four heavy-duty black metal spotlights consisting of a round body containing the light bulb and fronted by a clear beveled crystal, a rectangular box extends from one side of the body and houses the power switch and cable, on the side opposite the power box is a handle, and a Y-shaped support stand attached to the sides of the body. The power cable is thick heavy-duty rubber. On the diamond-shaped knobs that hold the Y support in place is a logo of a stylized R and M inside a circle - a metal plaque fixed to the rectangular box near the crystal contains the manufacturer and patent details.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 102.05.0123 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1950
- Material
- wood; metal; fabric; plastic;
- Catalogue Number
- 104.41.0157
- Description
- Dark wood and metal [possibly brass] Agfa tripod with a large rectangular camera mount covered in green felt, a plastic-handled crank to raise or lower the mount platform, and wooden legs with metal braces at the bottom to control the length. All joints on and around the mount platform are tightene…
1 image
- Title
- Tripod
- Date
- 1920 – 1950
- Material
- wood; metal; fabric; plastic;
- Dimensions
- 24.2 x 91.0 cm
- Description
- Dark wood and metal [possibly brass] Agfa tripod with a large rectangular camera mount covered in green felt, a plastic-handled crank to raise or lower the mount platform, and wooden legs with metal braces at the bottom to control the length. All joints on and around the mount platform are tightened/loosened with metal keys - the platform can rotate a full 360 degrees and the camera mount can tilt side to side, as well as 90 degrees up. There is a diamond-shaped “Agfa” logo tag attached to the top of one of the legs and a rectangular company tag on one short end of the mount platform.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0157
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.