Narrow Results By
And Case Eyeglasses
https://archives.whyte.org/en/permalink/artifact103.08.1034%20a%2cb
- Date
- 1910 – 1950
- Material
- glass; metal; skin
- Catalogue Number
- 103.08.1034 a,b
- Description
- (a) gold coloured pince-nez, clam shell hard case, oval lenses, wire rim screwed together near top, brow bar is wire wrapped, right lens has a wire loop near bottom right hinged nose pads have cork padding (b) clam shell case, diamond design on leather cover, blue velvet lining, stamped in gold on …
1 image
- Title
- And Case Eyeglasses
- Date
- 1910 – 1950
- Material
- glass; metal; skin
- Dimensions
- 3.7 cm
- Description
- (a) gold coloured pince-nez, clam shell hard case, oval lenses, wire rim screwed together near top, brow bar is wire wrapped, right lens has a wire loop near bottom right hinged nose pads have cork padding (b) clam shell case, diamond design on leather cover, blue velvet lining, stamped in gold on bottom rim: "The T. Eaton Co. Western Limited", a paper label is glued on top lining: "Mr. Sam Ward Box 193 Banff."
- Credit
- Gift of Sam Ward, Banff, 1973
- Catalogue Number
- 103.08.1034 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- straw
- Catalogue Number
- 103.01.0207
- Description
- Miniature woven hat and basket attached to a safety pin. The hat is a sombrero style and is made of plain straw with red blue, yellow, and green floral embroidery on the brim. The miniature basket is also straw with an embroidered flower and leaf pattern.
1 image
- Title
- Brooch
- Date
- n.d.
- Material
- straw
- Dimensions
- 8.5 x 7.2 cm
- Description
- Miniature woven hat and basket attached to a safety pin. The hat is a sombrero style and is made of plain straw with red blue, yellow, and green floral embroidery on the brim. The miniature basket is also straw with an embroidered flower and leaf pattern.
- Subject
- Moore home
- souvenir
- accessory
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 103.01.0207
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- leather; metal; wood
- Catalogue Number
- 104.41.0231
- Description
- A simple black leather camera case. On the front is a metal clasp, on either short side is two straps (top strap missing on one side), and along the lid of the case is a leather handle. The interior of the case is lined in red leather.
1 image
- Title
- Camera Case
- Date
- n.d.
- Material
- leather; metal; wood
- Dimensions
- 17.1 x 21.2 x 11.5 cm
- Description
- A simple black leather camera case. On the front is a metal clasp, on either short side is two straps (top strap missing on one side), and along the lid of the case is a leather handle. The interior of the case is lined in red leather.
- Subject
- camera
- photography
- photography accessory;
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0231
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- canvas; leather; metal
- Catalogue Number
- 104.41.0233
- Description
- A square-shaped brown canvas camera bag with two leather straps wrapped around the case on the front side and one strap wrapped around the side of the case. The front two straps come together in buckles to secure the case. There are two leather handles, one attached to the two straps and another th…
1 image
- Title
- Camera Case
- Date
- n.d.
- Material
- canvas; leather; metal
- Dimensions
- 16.9 x 18.7 x 15.3 cm
- Description
- A square-shaped brown canvas camera bag with two leather straps wrapped around the case on the front side and one strap wrapped around the side of the case. The front two straps come together in buckles to secure the case. There are two leather handles, one attached to the two straps and another that is the strap wrapped around the entirety of the side of the case. The interior of the case is lined with a green fabric. There are two flaps from the side of the case that hang in the interior.
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0233
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- leather; metal
- Catalogue Number
- 104.41.0247
- Description
- A medium sized worn black leather camera bag with a long strap with two metal buckles. On the front of the bag is a metal clasp with “CKC” (Canadian Kodak Co., Limited logo) and a lever to release the clasp.
1 image
- Title
- Camera Case
- Date
- n.d.
- Material
- leather; metal
- Dimensions
- 18.6 x 9.2 x 3.9 cm
- Description
- A medium sized worn black leather camera bag with a long strap with two metal buckles. On the front of the bag is a metal clasp with “CKC” (Canadian Kodak Co., Limited logo) and a lever to release the clasp.
- Credit
- Gift of Don Harmon, Banff, 1985
- Catalogue Number
- 104.41.0247
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1975
- Material
- leather; wood; metal; plastic; paper
- Catalogue Number
- 104.41.0253 a-e
- Description
- A black hardshell leather camera case with gold detailing with two cut-film holders/double dark slides, a wollensak lens, and Kodak informational sheets. a) A black hardshell leather camera case with gold detailing, including three clasps with one missing the hinge and a large one in the middle wit…
1 image
- Title
- Camera Case
- Date
- prior to 1975
- Material
- leather; wood; metal; plastic; paper
- Dimensions
- 24.8 x 34.2 x 15.6 cm
- Description
- A black hardshell leather camera case with gold detailing with two cut-film holders/double dark slides, a wollensak lens, and Kodak informational sheets. a) A black hardshell leather camera case with gold detailing, including three clasps with one missing the hinge and a large one in the middle with a spot for a key to lock it. Each corner of the case features gold detailing. There is a black handle on top attached via rings. Along the shorter side are two rings, presumably to attach a longer carrying strap for the case. The interior of the case is covered in dark green velvet, with two compartments in the main body - one slightly smaller than the other, and multiple compartments in the top with coverings held by button clasps. The left side compartment is a single square and the right side has three compartments - two small squares stacked and a rectangle that features a cut-out in the covering to reveal a strip of the compartment. In the bottom of the case is a short cord photography accessory and a bent metal track for a camera(?)b & c) Two identical cut-film holders/double dark slides. They are all black film holders. The slide handles are thin metal rods in the middle of the holder. One side along the edges of the frame features stamped text which reads “3 1/4 x 4 1/4 GRAFLEX FILM S. PAT 2056144” “MADE IN U.S.A. BY GRAFLEX INC ROCHESTER, N.J.” On b) there are two stickers, one on each side, with handwriting one reads “3” and the other “B 1 W 64”. On c) there are two stickers, one on each side, with handwriting reads “5” and “B 6 W 64”. 15.4 x 10.1 x 1.3 cm d) A Wollensak 65mm Raptar Wide angle lens mounted on a black painted board. The board is square with the front having a raised layer of board and an “A” stamped into one of the corners. The inscription on the inner part of the lens reads “WOLLENSAK 65MM f/6.8 CW RAPTAR WIDE ANGLE No A553800” and aperture ring with “22” “16” “11” “8” “6.8” “f”. It comes with an orange rubber cap that reads “WOLLENSAK”. 2.8 x 7.9 x 7.9 cm [inside the top part of the lid on the left side] e) Two sheets of information sheets. A smaller one for “KODAK EKTACHROME FILM, Daylight Type” with information about emulsion number, speed, electronic flash, and colour balance. [13.3 x 11.8 cm] The larger folded sheet is for “KODAK PANATOMIC-X SHEET FILM” with information about exposure and development. One side is in english and the other in french. [26.7 x 23.8 cm] e)
- Credit
- Gift of Don Harmon, Banff, 1985
- Catalogue Number
- 104.41.0253 a-e
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- metal; glass
- Catalogue Number
- 104.41.0236
- Description
- A small metal lens with multiple layers of rings that turn to make adjustments to the lens. There is white text on the inside of the front of the lens which reads “(35 MM) f/3.5 SER. NO. 477034 WOLLENSAK TYPE-V, 1 3/8 IN.” On the bottom of the lens white text reads “7034”. From the front to the bac…
1 image
- Title
- Camera Lens
- Date
- n.d.
- Material
- metal; glass
- Dimensions
- 3.5 cm
- Description
- A small metal lens with multiple layers of rings that turn to make adjustments to the lens. There is white text on the inside of the front of the lens which reads “(35 MM) f/3.5 SER. NO. 477034 WOLLENSAK TYPE-V, 1 3/8 IN.” On the bottom of the lens white text reads “7034”. From the front to the back of the lens some of the rings have numbers around, the first one reads “16” “32” “64”, the next one “BHD” “3.5” “BHD 3.5” “BHD” “3.5”, and the final ring reads “3.5” “4” “5.6” 8 “11” “16”.
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0236
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1905 – 1927
- Material
- wood; metal; fabric
- Catalogue Number
- 104.41.0248 a-d
- Description
- A wooden tripod made by Eastman Kodak company. 3 sets of wooden legs that fold and slide out to extend - brass detailing and screw-knobs. The top of the tripod is a circular disk with brass detailing on the bottom to attach the legs, and the top of the disk has brown felt for where the camera would…
1 image
- Title
- Camera Tripod
- Date
- 1905 – 1927
- Material
- wood; metal; fabric
- Dimensions
- 112.0 x 18.0 cm
- Description
- A wooden tripod made by Eastman Kodak company. 3 sets of wooden legs that fold and slide out to extend - brass detailing and screw-knobs. The top of the tripod is a circular disk with brass detailing on the bottom to attach the legs, and the top of the disk has brown felt for where the camera would sit. Dimension for d) 3.3 x 15.4 x 15.4 cm
- Credit
- Gift of Don Harmon, Banff, 1985
- Catalogue Number
- 104.41.0248 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- leather; metal; plastic; fibre
- Catalogue Number
- 104.41.0265 a-d
- Description
- A folding safelight/lantern in a slim brown leather case.a) A slim brown leather case with a lid that wraps around the front of the case with a silver clasp in the middle. The interior of the case is lined with a white felt and a felt wrapped board to separate items in the case. b - c) Two black me…
1 image
- Title
- Candle Lamp
- Date
- prior to 1977
- Material
- leather; metal; plastic; fibre
- Dimensions
- 14.3 x 27.0 x 4.3 cm
- Description
- A folding safelight/lantern in a slim brown leather case.a) A slim brown leather case with a lid that wraps around the front of the case with a silver clasp in the middle. The interior of the case is lined with a white felt and a felt wrapped board to separate items in the case. b - c) Two black metal pieces irregular quadrilateral shapes, a stand and lid for the lantern. b) has a circle cut-out on one side (the top) and the other side there is a border around the middle - like a trench, and fits like a lid on top of the lantern screen. Along the edges of the bottom piece (c) there is a thin slot for the lantern screen to be placed. c) has a circle cut-out with a cylindrical piece sticking up on the inside. On the bottom of this piece are some narrow legs along each side and a square in the middle. b) 1.0 x 11.9 x 11.9 cm. c) 1.9 X 12.1 X 12.2 cm.e) A red lantern screen, that can be folded. On either end of the screen is black metal to stand on the metal pieces (b-c). One side features three metal snaps equally apart. The interior of the screen is black. Dimensions when folded: 25.7 x 13.0 x 0.9 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0265 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- metal; nylon; cardboard
- Catalogue Number
- 104.41.0269 a-d
- Description
- A Kodak red candle lamp or photography safelight with it’s original box. a) A red screen, that can be folded. On either end of the screen is silver metal to allow the screen to stand in the metal holders. On the inside on each side of the screen are metal rectangular frames. b) Bottom of the candle…
1 image
- Title
- Candle Lamp
- Date
- prior to 1977
- Material
- metal; nylon; cardboard
- Dimensions
- 15.2 x 8.4 cm
- Description
- A Kodak red candle lamp or photography safelight with it’s original box. a) A red screen, that can be folded. On either end of the screen is silver metal to allow the screen to stand in the metal holders. On the inside on each side of the screen are metal rectangular frames. b) Bottom of the candle lamp, a metal holder with a raised center for the candle. There is a candle in the middle and a lid that goes over the candle when not in use. 3.0 x 8.5 x 8.5 cm c) Top of the candle lamp, a metal lid with a rectangle indent on the exterior of the lid. 1.0 x 8.6 x 8.4 cm.d) The original box for the candle lamp, a white box with a printed label on the front. The label is simple, with a small illustration of the candle lamp on the top right corner and text that reads “THE” “KODAK” “CANDLE” “LAMP” “DIRECTIONS” “Unfold the red frame of the lamp and fit the square metal top to either end of the frame.” “Put the candle in the receptacle provided in the metal base and light it. Set the lamp frame on the base, taking care that the edges fit in securely.” in handwriting “55” “CANADIAN KODAK CO., LIMITED” “TORONTO, CANADA.” “MADE IN U.S.A.”. On the top an bottom lids it reads “KODAK CANDLE LAMP”. 17.8 x 10.0 x 3.3 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0269 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.