Skip header and navigation

Narrow Results By

21 records – page 1 of 3.

Date
c. 1910
Material
leather; metal; glass; wood; plastic; textile
Catalogue Number
104.41.0249
Description
Buster Brown box camera with brown leather handle. Solid structure with black textile covering made to resemble leather. The front of the camera has a hole that likely once held a lens. There are two smaller holes in the upper corner of the front, which contain small glass parts. There is also meta…
  1 image  
Title
Box Camera
Date
c. 1910
Material
leather; metal; glass; wood; plastic; textile
Dimensions
13.5 x 9.7 x 15.9 cm
Description
Buster Brown box camera with brown leather handle. Solid structure with black textile covering made to resemble leather. The front of the camera has a hole that likely once held a lens. There are two smaller holes in the upper corner of the front, which contain small glass parts. There is also metal hardware holding the front exterior panel to the structure. One side has a round hole with glass held by metal hardware, creating a viewfinder. There is also a metal winding mechanism, and a lever for the shutter release. The lever activates a mechanism that quickly uncovers and then re-covers the inner lens. The rear part of the camera has a small round, red-tinted window that would have shown the number for the section of film in position. At the top is a metal hinge that can be lifted to open the back panel, which comes down and is connected with a textile hinge. The top of the camera has a leather handle attached with metal pegs. The leather handle is worn, but you can see that it has been engraved by the manufacturer with the text: “No. 2A BUSTER BROWN”. There is also a viewfinder on the front corner. When the metal latch is opened, the rear panel opens and the interior cartridge can be seen. Pulling out the handle of the winding mechanism on the side of the camera releases the cartridge so that it can be removed. It’s a wooden box with a lens on the front and it has compartments for spools that hold the film. There is a spool in one side, but the other is empty. There are also two metal rollers that would hold the film in place. One side of the wooden cartridge is engraved with the following text: “MFD. BY”; “ANSCO COMPANY”; “BINGHAMTON, N.Y.”; “U.S.A.”; “PATENTED”; “JUNE 23 1903”; “SEPT. 20 1910”; “OTHER PAT. PENDING”; “FOR 6A OR 6B FILM”. Above the engraving is some handwriting in pencil that reads “6-A”; “2 1/2 x 4 1/2”. link to pdf of user manual: http://www.cameramanuals.org/agfa_ansco/ansco_buster_brown_camera.pdf
Subject
film photography
photography
Harmon
Buster Brown
camera
Credit
Gift of Don Harmon, Banff, 1985
Catalogue Number
104.41.0249
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
c. 1930
Material
paper; plastic;
Catalogue Number
104.41.0246
Description
A small black plastic camera, Univex Model A, in its original box with information sheet. The box is bright orange with black text and stripes along the box. Front of the box has an illustration of the camera in the top middle, with text surrounding that reads “UNIVEX PICTURES MAKE” “BEAUTIFUL ENLA…
  1 image  
Title
Camera
Date
c. 1930
Material
paper; plastic;
Dimensions
6.6 x 9.1 x 5.0 cm
Description
A small black plastic camera, Univex Model A, in its original box with information sheet. The box is bright orange with black text and stripes along the box. Front of the box has an illustration of the camera in the top middle, with text surrounding that reads “UNIVEX PICTURES MAKE” “BEAUTIFUL ENLARGEMENTS”. Underneath the illustration in cursive text “Univex” and in regular text “A JEWEL OF A CAMERA” and in the bottom black stripe, “UNIVERSAL CAMERA CORPORATION” “MADE IN U.S.A.” “NEW YORK, N.Y.”. This is the same on the opposite side. Along the shorter side is more text “MODEL A” “Univex” “CAMERA”, a stamp that reads “UNIVERSAL CAMERA COMPANY HERMANT BLOG. TORONTO, — CANADA”, and “MADE IN U.S.A.” The top and bottom of the box just read “MODEL A” “Univex” “CAMERA”. Inside the box is a small information sheet with pricing of rolls for the camera, printing and developing. The camera is small with a long square lens, a metal wire range finder that lines up with the smaller range finder attached to the side of the camera. The shutter is one the side of the lens, fairly small. There is a metal knob to wind the film. The back of the camera features raised text, “Univex” “USE UNIVEX No 00 FILM ROLLS ONLY” in a square, a red circle with “MADE IN UNITED STATES OF AMERICA”, “MODEL A CAMERA U.S. PAT. DES. 89.88 OTHER U.S. AND FOR’G’N PATSPOG” in a square, and “UNIVERSAL CAMERA CORPORATION NEW YORK, N.Y., U.S.A.”. The inside of the camera has a spot for film.
Subject
film photography
photography
Univex
Universal Camera Corporation
Harmon
camera
Credit
Gift of Don Harmon, Banff, 1985
Catalogue Number
104.41.0246
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1991
Material
metal; plastic
Catalogue Number
104.41.0254
Description
An Eastman Kodak Co. Camera , found in an avalanche slope behind Mount Edith on June 15 1991. The camera looks burnt, it is completely grey and rusted, many pieces are broken. It is housed in a Ziploc bag which catches the rust and corroded metal. There is still a roll of film in the camera.
  1 image  
Title
Camera
Date
prior to 1991
Material
metal; plastic
Dimensions
6.8 x 11.5 x 5.1 cm
Description
An Eastman Kodak Co. Camera , found in an avalanche slope behind Mount Edith on June 15 1991. The camera looks burnt, it is completely grey and rusted, many pieces are broken. It is housed in a Ziploc bag which catches the rust and corroded metal. There is still a roll of film in the camera.
Subject
photography
camera
avalanche
found item
Mount Edith
Credit
Gift of Adrian Phillips, Calgary, 1991
Catalogue Number
104.41.0254
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1923 – 1940
Material
metal; glass; fabric;
Catalogue Number
104.41.0185 a,b
Description
Silver metal Kodak lens with mounting plate that includes a fold-up view finder [possibly for a Ciné-Kodak motion picture camera] with black velvet-lined lens caps and a black fabric-wrapped extension trigger for an unknown camera.
  1 image  
Title
Camera Accessories
Date
1923 – 1940
Material
metal; glass; fabric;
Dimensions
4.2 x 4.1 x 9.6 cm
Description
Silver metal Kodak lens with mounting plate that includes a fold-up view finder [possibly for a Ciné-Kodak motion picture camera] with black velvet-lined lens caps and a black fabric-wrapped extension trigger for an unknown camera.
Subject
Crosby family
Abegweit
camera equipment
camera lens
Credit
Gift of Robert Crosby Family, Banff, 1998
Catalogue Number
104.41.0185 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1970
Material
leather; metal; glass; plastic; fabric; wood
Catalogue Number
104.41.0107 a,b
Description
Manufacturer details for Enlarger housed within box.Black equipment box with a hinged lid held closed with leather tabs/snaps as well as an olive green fabric strap wrapped around the box. The interior of the box is lined with blue velvet and has both plain wood and covered supports and braces thro…
  1 image  
Title
Camera Box
Date
1950 – 1970
Material
leather; metal; glass; plastic; fabric; wood
Dimensions
24.9 x 22.5 x 42.7 cm
Description
Manufacturer details for Enlarger housed within box.Black equipment box with a hinged lid held closed with leather tabs/snaps as well as an olive green fabric strap wrapped around the box. The interior of the box is lined with blue velvet and has both plain wood and covered supports and braces throughout. Contents of the box consists only of a Kodak Precision Enlarger with the open metal end capped with a cardboard box.
Subject
Nicholas Morant
photography
camera equipment
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0107 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1980
Material
leather; fabric; plastic; metal;
Catalogue Number
104.41.0137
Description
A grey plastic handheld flash with an expandable reflective disk in a black leather box lined with dark red velvet.The flash has a hook on the bottom where it can be fitted onto a camera, an articulated head where the reflective disk is, a distance gauge on the back [it was taped into a particular …
  1 image  
Title
Camera Flash
Date
1950 – 1980
Material
leather; fabric; plastic; metal;
Dimensions
4.2 x 5.5 x 12.0 cm
Description
A grey plastic handheld flash with an expandable reflective disk in a black leather box lined with dark red velvet.The flash has a hook on the bottom where it can be fitted onto a camera, an articulated head where the reflective disk is, a distance gauge on the back [it was taped into a particular position with a piece of clear tape that has since come unstuck], and a green plastic cord coming out of the front of the flash just below the disk.The box has a leather hinged lid and is held closed with a snap on a leather tab.
Subject
Nicholas Morant
photography
camera equipment
camera flash
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0137
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950 – 1965
Material
metal; plastic; fabric;
Catalogue Number
104.41.0162
Description
Large photographic negative enlarger. Mostly made of blue-grey metal, the enlarger consists of a large rectangular base with a support arm rising from the back which holds the enlarging mechanism. Hand-crank wheels on either side of the support arm allows the enlarger to be moved up and down. The t…
  1 image  
Title
Englarger
Date
1950 – 1965
Material
metal; plastic; fabric;
Dimensions
140.0 x 40.0 x 74.0 cm
Description
Large photographic negative enlarger. Mostly made of blue-grey metal, the enlarger consists of a large rectangular base with a support arm rising from the back which holds the enlarging mechanism. Hand-crank wheels on either side of the support arm allows the enlarger to be moved up and down. The top of the enlarger is a large silver dome [possibly the light] with the black and white fabric-wrapped power cord coming out the top, the dome sits on top of the main blue-grey metal tray where more dials can adjust settings and the tray for inserting the original negative sides out the front, coming out the bottom of the frame is a grey bellows that has the focussing lens on the bottom.
Subject
Nicholas Morant
photography
photograph equipment
darkroom
camera equipment
photograph developing
Credit
Gift of Nicholas Morant, Banff, 2006
Catalogue Number
104.41.0162
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1940 – 1941
Material
plastic; metal; cardboard;
Catalogue Number
104.41.0195
Description
Black plastic hand-held exposure meter with a metal and plastic dial with a raised knob on the front below a depressed window where the exposure meter is. On the bottom of the meter just below the main dial is the exposed lip of the metal dial so that it can be rotated and a small round red plastic…
  1 image  
Title
Exposure Meter
Date
1940 – 1941
Material
plastic; metal; cardboard;
Dimensions
5.2 x 7.2 x 9.2 cm
Description
Black plastic hand-held exposure meter with a metal and plastic dial with a raised knob on the front below a depressed window where the exposure meter is. On the bottom of the meter just below the main dial is the exposed lip of the metal dial so that it can be rotated and a small round red plastic button. On the back of the meter is a metal screw in the middle [possibly to allow access to the interior], manufacturer details, and a thin strip of fabric adhesive with F.L. Crosby’s address details typed on it in black. The cardboard box has a patterned brown and white lid that fits completely over a beige body and is lined with packing cardboard.
Subject
Crosby family
Abegweit
photography
camera equipment
Credit
Gift of Robert Crosby Family, Banff, 1998
Catalogue Number
104.41.0195
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
ca. 1922 – 1932
Material
metal; leather; glass
Catalogue Number
104.41.0237
Description
Black hard-sided leather No.1 Kodak Series III folding camera. The front panel is released by pressing a small round metal button on the narrow bottom edge [the bottom of the camera is noted by the presence of a threaded hole where a tripod could be mounted] and has a small rectangular metal foot w…
  1 image  
Title
Folding Camera
Date
ca. 1922 – 1932
Material
metal; leather; glass
Dimensions
17.1 x 7.8 x 3.5 cm
Description
Black hard-sided leather No.1 Kodak Series III folding camera. The front panel is released by pressing a small round metal button on the narrow bottom edge [the bottom of the camera is noted by the presence of a threaded hole where a tripod could be mounted] and has a small rectangular metal foot with “Kodak” engraved in decorative writing that keeps the camera propped up. The lens mechanism slides out on tracks with soft black leather bellows behind it and a viewfinder that can be used in portrait and landscape by gently push to the side. There is a art-deco decorated stylus housed next to the lens. There is lots of text along the lens to make adjustments, it is a “DIOMATIC No 0” lens. There are small plaques along the camera base which read “NO. 1 - KODAK SERIES III” “MADE IN CANADA BY CANADIAN KODAK CO., LIMITED TORONTO, ONT 28981”. The back panel of the camera pops off by pressing two metal clasps on both short sides and can house a roll of film. On the back embossed is text that reads “USE “KODAK” FILM NO A120” When the camera is open, on the top is a leather strap with a faded “Kodak” embossed on it.
Subject
film photography
folding camera
Kodak
photography
Credit
Gift of L. A. E Duncan, Calgary, 1980
Catalogue Number
104.41.0237
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1905 – 1927
Material
metal; leather; glass; wood
Catalogue Number
104.41.0245
Description
A large, black leather bound square folding camera from Eastman Kodak Co. The camera when folded looks like a leather case with a leather handle attached at the top with two large metal buttons. One of the shorter sides features varying mechanisms to make adjustments to the camera. At the top is re…
  1 image  
Title
Folding Camera
Date
1905 – 1927
Material
metal; leather; glass; wood
Dimensions
24.6 x 23.0 x 10.0 cm
Description
A large, black leather bound square folding camera from Eastman Kodak Co. The camera when folded looks like a leather case with a leather handle attached at the top with two large metal buttons. One of the shorter sides features varying mechanisms to make adjustments to the camera. At the top is rectangular shaped metal plate with a knob that can be twisted and will make a clicking noise with a engraved arrowed to indicate turn the knob counter-clockwise, underneath is a l-shaped leaver that has a minor turn radius with an “M” engraved on the one arm. In the middle is a gold metal knob that can be pushed away from the case to open the one side and reveal the camera. Near the knob is a metal plate that reads “SPEED GRAPHIC CURTAIN APERTURE”, a graph with numbers, and “FOLMER & SCHWING DIVISION” “EASTMAN KODAK CO.” “13476 ROCHESTER, N.Y.” At the bottom is another square-shaped plate with a knob that can be turned that corresponds to numbers in a small black circle in the plate. On the top of the case is a white sticker with blue numbers “68622”. On the back of the case is a section for film holders/double dark slides and a glass plate behind a piece of the case that opens with a clasp at the bottom of the square. The other short side features small metal circles and a hole for a screw - most likely for a tripod mount. The front of the case is flat. When the case is opened it reveals the folded camera with black bellows and a silver metal face with a Wollensak Betax No.3 lens. It moves on a track to extend and retract with a mechanism in the front that when pinch together allows for the movement of the camera. There is a partially ripped sticker on the wood panel that reads “Sales - Service - Repairs” “Camera & Instrument Crafts” “9452 Calgary, Alta.” One side of the panel also features a black plate with numbers for focal range.
Subject
film photography
photography
Kodak
folding camera
Harmon
camera
Credit
Gift of Don Harmon, Banff, 1985
Catalogue Number
104.41.0245
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

21 records – page 1 of 3.

Back to Top