Narrow Results By
Camera; Equipment Case
https://archives.whyte.org/en/permalink/artifact104.41.0287a-m
- Date
- 2024
- Catalogue Number
- 104.41.0287a-m
- Description
- Custom red brown camera case containing a camera, recorder, and various equipment and accessories.a) Red brown suitcase that has been customized to carry cameras and their equipment. The outside has reinforced leather corners and silver hardware. The outside has the initials “J. R. G.” on the top a…
1 image
- Title
- Camera; Equipment Case
- Date
- 2024
- Dimensions
- 13.5 x 41.0 cm
- Description
- Custom red brown camera case containing a camera, recorder, and various equipment and accessories.a) Red brown suitcase that has been customized to carry cameras and their equipment. The outside has reinforced leather corners and silver hardware. The outside has the initials “J. R. G.” on the top and bottom sides, as well as under the handle. Inside, the case has a brown plaid lining. The bottom of the case has been fitted with a custom made wood, cream coloured apparatus that is designed to hold (c). It comes apart into two pieces - the base, which is not removable, and the lid, which slides out to the right once it has been unhooked from the latch built into the base n the left hand side. The lid of the suitcase reads “J. R. GRICE / 9920 - 75 ST / EDMONTON / ALBERTA”. The foam on the apparatus has worn off, leaving black dust like particles in the suitcase. There are a set of two keys hanging from a brown strap connecting the lid to the base in the center of the suitcase.b) Silver and black camera in a brown leather case. The camera is secured in the case with a wide, flat screw at the base. The camera also comes with its original document outlining the features and instructions of the camera. The camera itself is a Olympus Chrome Six. According to the document, the camera was used to produce “ (12) 6x6cm photos or (16) 4.5x6cm photos on a roll of 120 film”. The camera is black leather with a silver body. There are two silver knobs on the base. The top has four knobs, a viewfinder, and a mount for flash. The smallest knob next to the viewfinder is used to release the lens, which opens from a square panel in the front. The lens is a coated Olympus Zuiko lens. The brown case is Olympus brand and is custom fitted to the camera model. It opens from the top and has two snaps that secure it to the base of the case. A small flap can be opened to allow the camera to be used while remaining in the case. The strap that connects the top of the case to the bottom reads “J. R. GRICE / 9920 - 75 ST / EDMONTON / ALBERTA”. There is a short, thin strap that attaches to either side of the case by metal hardware - one side is broken, the leather has split. The case shows some wear - the connecting middle strap has a large horizontal tear at the seam, while the lens flap has a smaller horizontal tear on the right hand side. c) Green, silver and black recorder that has a strap, brown cloth case and spare reel. The brand on the case, recorder and strap is labeled as Sankyo. The recorder is a muted green colour, with black and silver components. It has three lenses on the front with metal lens caps, The viewfinder is clear. The strap is made of silver components and brown braided cord. The case is brown cloth with a gold zipper, with Sankyo Japan embossed on the side. The reel is made of grey plastic and branded as Kodak, but is believed to work with the recorder. d) Black and white stop watch on a red cord. Was likely used to time exposure times. e) Viewfinder in its original box. Brand is “Watameter”.f) Light meter on a silver snake-chain in its original box. Still operable.g) Blower brush in its original box. h) Handmade camera mount made from wood with attached trigger. There is also a spare trigger wire. i) Film reel it its original box. Reel is empty.j) Bag of miscellaneous bulbs, two of which are for a Sylvanus projector. One is brand new in box. k) Red cloth bag. Front reads “BeautifFeel / Design that feels good” while the bottom says “every woman deserves a pair”l) Miscellaneous papers detailing movie film features and instructions. Have been folded, so they are creased.
- Credit
- Gift of Janet Grice, Banff, 2024
- Catalogue Number
- 104.41.0287a-m
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Catalogue Number
- 104.41.0081 a-d
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded suppor…
1 image
- Title
- Camera Tripod
- Date
- 1995
- Material
- leather; metal; wood; plastic
- Dimensions
- 28.3 x 28.6 x 138.5 cm
- Description
- Case: Manufacturer label on inside of lid reads G.R. TAYLOR LTD. TRUNKS & SAMPLE CASES WINNIPEG. No manufacturer details available online. Case is triangular in shape with a central carrying handle and metal clasps located along the narrow upper edge - one side of the case folds down. Padded supports and buckled leather straps located inside to keep the tripod in place - straps not done up at time of processing. NICHOLAS MORANT written in white along the narrow top edge on either side of carrying handle, TR1 written in yellow paint in the top left end of narrow edge and in top right corner of opening side, the torn remains on a Canadian Pacific Railway label remains on the side that does not open. Tripod: Manufacturer mark on metal support below the camera support base reads [D]INEMA EQUIPMENT CO. No manufacturer details available online. Tripod dimensions are 124.1x14.7x14.7 cm. The legs of the tripod are wood, with metal spikes at the bottoms, metal brackets, and a metal camera support rig [possibly cast iron]. The legs are held together with a buckled strip of leather at the bottom. Also in the case is a metal pole with a black plastic handle that can screw into the camera support base for use as a controller and a plastic zip-lock baggie containing a length of chain with 4 metal clasps throughout 286.0 cm in length.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0081 a-d
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1957 – 1957
- Material
- metal; wood; glass
- Catalogue Number
- 104.41.0105
- Description
- Large zoom camera lens mounted on a wood base. Both ends have lens caps on them, the larger one is lined with red velvet.
1 image
- Title
- Camera Lens
- Date
- 1957 – 1957
- Material
- metal; wood; glass
- Dimensions
- 20.5 x 15.3 x 44.5 cm
- Description
- Large zoom camera lens mounted on a wood base. Both ends have lens caps on them, the larger one is lined with red velvet.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0105
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1957 – 1957
- Material
- cardboard; paper; leather; metal; plastic;
- Catalogue Number
- 104.41.0196
- Description
- White plastic light meter with a central metal dial above a clear plastic window over the meter needle and a removable metal grate over the light-sensitive plate on top housed in a brown leather pouch with “SOLEPHOT” embossed in gold on the front. The leather pouch snaps closed over the top at the …
1 image
- Title
- Light Meter
- Date
- 1957 – 1957
- Material
- cardboard; paper; leather; metal; plastic;
- Dimensions
- 3.5 x 6.3 x 8.4 cm
- Description
- White plastic light meter with a central metal dial above a clear plastic window over the meter needle and a removable metal grate over the light-sensitive plate on top housed in a brown leather pouch with “SOLEPHOT” embossed in gold on the front. The leather pouch snaps closed over the top at the back and has a small opening in the bottom through which a gold metal chain is attached to the bottom of the meter. The meter is housed in its original cardboard box, which consists of a gold lid with “SOLAPHOT” printed in red on the lid that fits completely over the white body - also inside the box is the paper instruction manual.
- Credit
- Gift of Robert Crosby Family, Banff, 1998
- Catalogue Number
- 104.41.0196
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1952 – 1952
- Material
- cardboard; paper; plastic; leather; metal;
- Catalogue Number
- 104.41.0188
- Description
- View-Master Personal Stereo Camera leather carrying case in the original box - the case has never been used. The carrying case is made of tan-coloured leather and consists of two pieces that snap together with three small metal snaps - two on the bottom and one at the back. Also on the bottom is a …
1 image
- Title
- Camera Case
- Date
- 1952 – 1952
- Material
- cardboard; paper; plastic; leather; metal;
- Dimensions
- 7.9 x 12.5 x 19.6 cm
- Description
- View-Master Personal Stereo Camera leather carrying case in the original box - the case has never been used. The carrying case is made of tan-coloured leather and consists of two pieces that snap together with three small metal snaps - two on the bottom and one at the back. Also on the bottom is a large silver metal screw that attaches the case to the camera. The interior of the case is stuffed with packing paper and has an extra tan strap rolled up in the middle - an additional black leather strap in a plastic sleeve is also included. The box consists of a patterned maroon body with a silver and green lid.
- Credit
- Gift of Robert Crosby Family, Banff, 1998
- Catalogue Number
- 104.41.0188
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1959
- Material
- leather; metal; fabric; wood
- Catalogue Number
- 104.41.0082 a-c
- Description
- Metal developing tanks dimensions: 13.6x11.6x17.2 or smaller.Torn and crinkled label free-floating inside case reads “DALLON SS TANKS 3 1/4 X 4 1/4 24 CAPACITY.” DALLON most likely refers to David Allan (Dallan) sheet metal workers, specializing in darkroom products, of London England. Case is a ha…
1 image
- Title
- Film Developer
- Date
- 1930 – 1959
- Material
- leather; metal; fabric; wood
- Dimensions
- 16.0 x 17.5 x 30.0 cm
- Description
- Metal developing tanks dimensions: 13.6x11.6x17.2 or smaller.Torn and crinkled label free-floating inside case reads “DALLON SS TANKS 3 1/4 X 4 1/4 24 CAPACITY.” DALLON most likely refers to David Allan (Dallan) sheet metal workers, specializing in darkroom products, of London England. Case is a hard-sided black leather box with a lid that hinges open and held open with a brown leather strip on the left-hand side - also has silver metal clasps and carry handle on the front of the case. The case’s interior is lined with grey fabric and the main compartment is divided into two equal sections that house the metal developing tanks. Nailed to the bottoms of each compartment are pieces of wood to prevent the tanks from sliding around. The metal tanks have lids that lift off - one has notches that could have been used to latch the lid down, but no latches remain, and the other has holes in the middle of the lid from where a handle used to be, the handle is missing. Inside the tanks are cradles with lifting handles at either end and removable curved brackets to mount the film in. One tank has what appears to be a vent with a cap on one end, the cap appears to be stuck in place. Folded-up newspaper packed into empty spaces of case beside the tanks, removed.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0082 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1999
- Material
- leather; fabric; metal; wood; paper
- Catalogue Number
- 104.41.0087
- Description
- Burgundy leather hard-sided travel case for Leica camera accessories. The case looks like a standard briefcase, with leather caps on the corners and two locking clasps, one on either side of the handle, which is still wrapped in paper. Throughout the exterior are black and silver metal studs either…
1 image
- Title
- Camera Case
- Date
- 1920 – 1999
- Material
- leather; fabric; metal; wood; paper
- Dimensions
- 10.6 x 26.2 x 41.5 cm
- Description
- Burgundy leather hard-sided travel case for Leica camera accessories. The case looks like a standard briefcase, with leather caps on the corners and two locking clasps, one on either side of the handle, which is still wrapped in paper. Throughout the exterior are black and silver metal studs either holding the corner protectors in place or the interior dividing compartments. The interior of the lid is lined with red and white plaid paper and the main body of the case is lined with thin pale wood. Throughout the interior are wooden pieces meant to separate accessories, some of the pieces are covered with burgundy velvet. There is a small metal ring with two keys for the latches’ locks hanging from the handle.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0087
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1999
- Material
- leather; metal; fabric; paper
- Catalogue Number
- 104.41.0088
- Description
- A travel case made from some hard light-weight black material (possibly metal) with a hinged lid that closes with metal latches on either side of a latched lock. Metal brackets on all of the corners and reinforcing along all edges - wooden runners along the bottom of the case horizontally. There is…
1 image
- Title
- Camera Case
- Date
- 1920 – 1999
- Material
- leather; metal; fabric; paper
- Dimensions
- 36.2 x 34.4 x 16.5 cm
- Description
- A travel case made from some hard light-weight black material (possibly metal) with a hinged lid that closes with metal latches on either side of a latched lock. Metal brackets on all of the corners and reinforcing along all edges - wooden runners along the bottom of the case horizontally. There is a leather strap that clips into loops on the short sides of the box as well as a leather travel tag. Attached to the leather strap is a yellow Canadian Pacific Railway travel tag with a piece of string. Throughout the exterior are various travel labels, mostly torn. On the lid is a white rectangular “Canadian Pacific” label that reads “Nicholas Morant, Special Photographer Canadian Pacific Ltd. care CP Transport” in typed text and “Banff Alta” written in black ink above a scratched out typed “Victoria, B.C.” Also on the lid is a piece of masking tape with “LEICA & FILM & ACCESSORIES” written in blue ink possibly by Nick Morant. The interior is lined with beige fabric and both the main body and the interior of the lid are divided into two equal compartments. In one of the body compartments are wooden slats that most likely sit on supports inside each part to create additional compartments at the bottom of the case, but they are not in place. The compartments in the lid are held closed with small pieces of leather that snap onto the front panels which hinge down on strips of brown fabric tape. Inside the case and lid compartments are a Leica camera and various accessories,
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0088
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1935 – 1980
- Material
- metal; leather; plastic; glass; paper
- Catalogue Number
- 104.41.0089 a-s
- Description
- Leica G (Leica IIIa) black and silver camera in a brown leather case and various lenses, filters, triggers, film canister, and plastic envelope folder filled with various instruction manuals. The camera is fitted with a Leitz Elmar f=3,5cm lens with a black plastic lens cap. Also includes a “P. Ang…
1 image
- Title
- Leica Camera
- Date
- 1935 – 1980
- Material
- metal; leather; plastic; glass; paper
- Dimensions
- 8.7 x 6.7 x 14.3 cm
- Description
- Leica G (Leica IIIa) black and silver camera in a brown leather case and various lenses, filters, triggers, film canister, and plastic envelope folder filled with various instruction manuals. The camera is fitted with a Leitz Elmar f=3,5cm lens with a black plastic lens cap. Also includes a “P. Angenieux F. 90 1 : 2,5” zoom lens housed in what appears to be a homemade fabric sleeve, Leica viewfinder in a brown leather case, and three other empty lenses that house various lenses in either brown leather cases and a red fabric bag, possibly homemade.Filters include a yellow metal-mounted “KODAK SERIES VI ADAPTER RING” in a red fabric bag, metal-mounted “Series VI Kodak Pola-Screen” in a yellow Kodak cardboard box, a blue “80 - B Floods with Daylight Film” filter in a black and clear plastic box, two “Kodak Series VI color compensation” metal-ringed filters in a black and yellow “KODAK” plastic case, and three warm-toned “KODAK TYPE A COLOR FILMS” filters in individual clear plastic cases.Other accessories include extended triggers (used to minimize camera movement when taking a picture), brackets and braces for attaching the camera to a tripod, and two empty cases - one a black Leica case probably for a lens and the other a white film canister.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0089 a-s
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1940 – 1980
- Material
- leather; wood; metal; plastic; fabric; glass; paper
- Catalogue Number
- 104.41.0090 a-j
- Description
- Black hard-sided travel case with a hinged lid, handle, and carry strap. Metal caps on all the corners and reinforcing along all the edges. Three clasps on the lid, the centre one has a keyhole, no key. The handle on the lid may have been compressed paper or leather, but has been wrapped in black e…
1 image
- Title
- Camera Case
- Date
- 1940 – 1980
- Material
- leather; wood; metal; plastic; fabric; glass; paper
- Dimensions
- 32.5 x 17.0 x 40.2 cm
- Description
- Black hard-sided travel case with a hinged lid, handle, and carry strap. Metal caps on all the corners and reinforcing along all the edges. Three clasps on the lid, the centre one has a keyhole, no key. The handle on the lid may have been compressed paper or leather, but has been wrapped in black electrical tape so only the original metal loops and brackets remain. The carry strap attaches to both short sides with metal clips and is made of brown leather - the strap has a buckle that is undone so the two halves hang separately at the sides. Throughout the exterior are various travel stickers and labels, mostly torn.The interior of the case is lined with black paper and the bulk of the body is comprised of a particleboard insert separated into three compartments that sits on braces near the bottom, creating a hidden compartment underneath.Contents of the box include various camera accessories and equipment, as well as a collection of manuals for various film exposures. Includes a light reflector in a white bag with blue edges, a flash mount in a handmade red bag and the flash mount’s cords in a different dark red velvet bag (also in that bag are two extended triggers), a “Rolleflex” lens in a brown leather pouch inside a purple Crown Royal bag, eight manuals in a white “Canadian National Hotels” bag, two different sized yellow filters in clear plastic cases, and in a square cardboard box are two screws, a grey cable, a square lens and a 250 mm focuser, and a lens block.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0090 a-j
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.