Skip header and navigation

Narrow Results By

59 records – page 1 of 6.

Date
1950
Material
metal
Catalogue Number
108.04.1174 a,b
Description
A pair of crampons with one piece of cotton twill binding with metal closure attached to one of the side rings. They are made from one piece of metal and cut-out with four points, the centre bar is split and turned down. At the centre two pieces go off at right angles and curve upward with a ring …
  1 image  
Title
Crampons
Date
1950
Material
metal
Dimensions
4.5 x 10.5 x 4.5 cm
Description
A pair of crampons with one piece of cotton twill binding with metal closure attached to one of the side rings. They are made from one piece of metal and cut-out with four points, the centre bar is split and turned down. At the centre two pieces go off at right angles and curve upward with a ring for bindings at each end. Rings enclosed in loops 3 cm dia. Stamped on top “44” in between “ER”, the rest is indiscernible, “HAMMERWEK FULPMES” followed by “45” and underneath the mid-portion cutout that has been turned down “MUSTERSCHUTZ GES. GESCH.”
Subject
sports
climbing
Lizzie Rummel
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1989
Catalogue Number
108.04.1174 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950
Material
metal
Catalogue Number
108.04.1171
Description
An early style, horizontal, hard metal ice piton with an oblong metal ring attached. The blade is narrow with a point and the other end has a hole where the ring for the carabiner goes through. The oblong ring is not soldered together, just folded shut to close. The blade is bent and has nicks on …
  1 image  
Title
Horizontal Piton
Date
1950
Material
metal
Dimensions
3.0 x 3.0 x 26.7 cm
Description
An early style, horizontal, hard metal ice piton with an oblong metal ring attached. The blade is narrow with a point and the other end has a hole where the ring for the carabiner goes through. The oblong ring is not soldered together, just folded shut to close. The blade is bent and has nicks on either side making it serrated for ice climbing.
Subject
sports
climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
Catalogue Number
108.04.1171
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Horizontal, Ice Piton

https://archives.whyte.org/en/permalink/artifact108.04.1177
Date
1950
Material
metal
Catalogue Number
108.04.1177
Description
An early example of a hard metal ice piton with an oblong metal ring attached. The blade has a twist turn before the hole where the ring goes through. The ring has been welded together to close. The blade has nicks on either side making it serrated for ice climbing. “CJB” is engraved on the blade.
  1 image  
Title
Horizontal, Ice Piton
Date
1950
Material
metal
Dimensions
2.5 x 26.8 w/o ring cm
Description
An early example of a hard metal ice piton with an oblong metal ring attached. The blade has a twist turn before the hole where the ring goes through. The ring has been welded together to close. The blade has nicks on either side making it serrated for ice climbing. “CJB” is engraved on the blade.
Subject
sports
ice climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
Catalogue Number
108.04.1177
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Horizontal, Ice Piton

https://archives.whyte.org/en/permalink/artifact108.04.1178
Date
1950
Material
metal
Catalogue Number
108.04.1178
Description
An early example of a hard metal ice piton with an oblong metal ring attached. It has a twist turn before the hole where the ring goes through. The ring has been welded to close it. The blade has nicks on either side making them serrated for ice climbing. “CJB” is engraved on the blade.
  1 image  
Title
Horizontal, Ice Piton
Date
1950
Material
metal
Dimensions
2.50 x 26.0 blade w/o ring cm
Description
An early example of a hard metal ice piton with an oblong metal ring attached. It has a twist turn before the hole where the ring goes through. The ring has been welded to close it. The blade has nicks on either side making them serrated for ice climbing. “CJB” is engraved on the blade.
Subject
sports
ice climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
Catalogue Number
108.04.1178
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1950
Material
metal; fiber
Catalogue Number
108.04.1147
Description
(a) One screw gate, old-style, heavy metal carabiner , with spring loaded hatch, with climbing rope (260cm long) attached. Stamp engraved on sideof carabiner “STUBAI MADE IN AUSTRIA”
  1 image  
Title
Carabiner; Rope
Date
1950
Material
metal; fiber
Dimensions
5.0 x 10.0 cm
Description
(a) One screw gate, old-style, heavy metal carabiner , with spring loaded hatch, with climbing rope (260cm long) attached. Stamp engraved on sideof carabiner “STUBAI MADE IN AUSTRIA”
Subject
climbing
sports equipment
guding
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2004
Catalogue Number
108.04.1147
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955
Material
metal
Catalogue Number
108.04.1168
Description
A hand-forged, chromalloy steel, angle piton with a welded ring attached. Engraved “STUBAI” below that “MADE IN AUSTRIA” and then “HG”.
  1 image  
Title
Angle Piton
Date
1955
Material
metal
Dimensions
2.4 x 16.0 cm
Description
A hand-forged, chromalloy steel, angle piton with a welded ring attached. Engraved “STUBAI” below that “MADE IN AUSTRIA” and then “HG”.
Subject
sports
climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1991
Catalogue Number
108.04.1168
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955
Material
metal; plastic; leather
Catalogue Number
104.44.1020 a, b
Description
A metal hand compass (a) in a brown leather case (b) into which the compass fits perfectly. The case has “MADE IN GERMANY” stamped in ink on the inside. The compass is two-sided; one side is calibrated for a directional compass and one side is for measuring inches to miles and nautical miles (on ma…
  1 image  
Title
Hand Compass
Date
1955
Material
metal; plastic; leather
Dimensions
9.2 x 5.2 cm
Description
A metal hand compass (a) in a brown leather case (b) into which the compass fits perfectly. The case has “MADE IN GERMANY” stamped in ink on the inside. The compass is two-sided; one side is calibrated for a directional compass and one side is for measuring inches to miles and nautical miles (on maps). The compass is suspended on a central pivot with a metal ring on the top. The compass has a round face covered by hard clear plastic; the body of the compass is metal. The bottom of the compass is elongated with a point at the end where a small wheel is riveted onto the body. This compass wheel is used for measuring distances (land miles or nautical miles) on maps. On the directional side of the compass face the background is white and the letters and numbers are blue. The magnetic compass needle is half silver, half blue. The face dial is calibrated in degrees starting with 0, every 10 degrees marked to 330, completing the 360 degrees; N, E, S, and W and the lines marking them from the centre are in bold face blue N/E, S/E, S/W and N/W are in blue but smaller lettering. On the opposite side of the compass the outer ring is blue and the inner ring is orange, the background is white with the degrees in black; the needle is black also. The outer “inches to miles” compass has 39 on the top and every fifth degree is calibrated to 3, then 6, 12, 15, 18, 21, 24, 27, 30, 33, 36 where it comes full circle to the top at 39. The inner “Nautical Miles” starts with 0 at the top and every 10th degree is marked in succession by 5, 10, 15, 20, 25, 30, until it comes full circle to 0. The word “GERMANY” is printed at the bottom of the compass.
Subject
climbing
hiking
mountaineering
exploration
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
104.44.1020 a, b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955
Material
metal; leather
Catalogue Number
108.04.1149
Description
Piton hammer with rectangular steel head and steel looped handle with thick black leather grip; climbing cord looped through and knotted. A steel shaft bent to loop around to form a handle is soldered onto the steel head. A thick leather piece, dyed black, with no apparent seam, has been fitted ove…
  1 image  
Title
Piton Hammer
Date
1955
Material
metal; leather
Dimensions
21 x 5.5 cm
Description
Piton hammer with rectangular steel head and steel looped handle with thick black leather grip; climbing cord looped through and knotted. A steel shaft bent to loop around to form a handle is soldered onto the steel head. A thick leather piece, dyed black, with no apparent seam, has been fitted over the shaft for gripping. There is a thin piece of climbing rope, blue and white weave, knotted at the end and looped through the shaft for attaching and carrying.
Subject
sports
climbing
mountaineering
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
108.04.1149
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1955
Material
metal; wood
Catalogue Number
108.04.1148
Description
Typical ice axe, well-used, with head (blade) and two long metal strips extending 14 cm. from head (blade) riveted to the wooden shaft, two rivets to each side. “WERK... PMES” encircled and “ORIGINAL ASCHENBRENNER GES.GESCH.” stamped on the head. There is an a “M” scored in the wooden shaft 4 cm. f…
  1 image  
Title
Ice Ax
Date
1955
Material
metal; wood
Dimensions
75 x 30 cm
Description
Typical ice axe, well-used, with head (blade) and two long metal strips extending 14 cm. from head (blade) riveted to the wooden shaft, two rivets to each side. “WERK... PMES” encircled and “ORIGINAL ASCHENBRENNER GES.GESCH.” stamped on the head. There is an a “M” scored in the wooden shaft 4 cm. from the metal head. A screw is embedded in the wooden shaft 25.5cm from the pointed metal tip.
Subject
sports
climbing
mountaineering
Hans Gmoser
Credit
Gift of Margaret Gmoser, Harvie Heights, 2008
Catalogue Number
108.04.1148
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960
Material
fibre; metal; plastic; elastic
Catalogue Number
103.08.1150 a,b
Description
(a) One pair beige-coloured goggles with yellow lenses, triangular metal frames with fabric edging; ribbon around the metal portion, stretch nylon gussets and velveteen on the portion against the wearer’s face. , the second set wider spaced, has twine threaded through to attach the frame to the foa…
  1 image  
Title
Ski Goggles
Date
1960
Material
fibre; metal; plastic; elastic
Dimensions
5.0 x 13.0 cm
Description
(a) One pair beige-coloured goggles with yellow lenses, triangular metal frames with fabric edging; ribbon around the metal portion, stretch nylon gussets and velveteen on the portion against the wearer’s face. , the second set wider spaced, has twine threaded through to attach the frame to the foam rubber cushion around the metal. The eyepieces are connected by a piece of elastic fabric across the nose and an adjustable elastic head strap that has lost most of its elasticity and is held together by metal clips.(b) A round aluminum storage container, 7.2cm high and 6.7cm radius, with a screw-on lid. On the bottom engraved “Switzerland”.
Subject
sports
winter
skiing
climbing
Hans Gmoser
Credit
Gift of Hans and Margaret Gmoser, Harvie Heights, 1989
Catalogue Number
103.08.1150 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

59 records – page 1 of 6.

Back to Top