Narrow Results By
- Date
- 1920 – 1950
- Material
- metal;
- Catalogue Number
- 104.19.0277 a,b
- Description
- Two rectangular metal wire cooling racks with an X-shaped support frame, built into which are 5 supports to keep it off the counter, and thin wire woven throughout in a grid.
1 image
- Title
- Cooling Rack
- Date
- 1920 – 1950
- Material
- metal;
- Dimensions
- 1.6 x 23.1 x 33.0 cm
- Description
- Two rectangular metal wire cooling racks with an X-shaped support frame, built into which are 5 supports to keep it off the counter, and thin wire woven throughout in a grid.
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0277 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1923 – 1928
- Material
- metal;
- Catalogue Number
- 104.19.0276
- Description
- Rotary style eggbeater comprised of two bulb-shaped flat blades that spin around a metal wire bulb-shaped base, a flat plate with serrated edge that fits into a corresponding cog at the top of one of the beaters operated by a short spring-wrapped handle, and a narrow handle at the top. Engraved on …
1 image
- Title
- Eggbeater
- Date
- 1923 – 1928
- Material
- metal;
- Dimensions
- 6.5 x 7.2 x 22.8 cm
- Description
- Rotary style eggbeater comprised of two bulb-shaped flat blades that spin around a metal wire bulb-shaped base, a flat plate with serrated edge that fits into a corresponding cog at the top of one of the beaters operated by a short spring-wrapped handle, and a narrow handle at the top. Engraved on the plate is the manufacturer logo, patent information, and “MADE IN U.S.A.”
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0276
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1950
- Material
- metal; steel; wood;
- Catalogue Number
- 104.20.1298 a,b
- Description
- Two kitchen knives with steel blades and wooden handles - the handles have three brass studs each. One knife has a thicker blade that curves slightly and has a small raised reinforcement before the handle - stamped on one side near the handle is a head wearing a hat and scarf that has “LA DUROLLIEN…
1 image
- Title
- Kitchen Knife
- Date
- 1920 – 1950
- Material
- metal; steel; wood;
- Dimensions
- 1.7 x 2.3 x 32.5 cm
- Description
- Two kitchen knives with steel blades and wooden handles - the handles have three brass studs each. One knife has a thicker blade that curves slightly and has a small raised reinforcement before the handle - stamped on one side near the handle is a head wearing a hat and scarf that has “LA DUROLLIENNE” written on it. The other knife’s blade has been sharpened so much it appears to be less than half of its original width - faded remnants of something stamped on the blade is visible, but illegible.
- Subject
- kitchen utensils
- cooking
- food preparation;
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.20.1298 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1950
- Material
- metal; aluminum;
- Catalogue Number
- 104.19.0279 a-c
- Description
- Aluminum pot with steaming tray insert and lid. The pot has two handles opposite each other and the tray insert has holes throughout the bottom and two wires that, when raised up, intersect in the middle - possibly so that it can be hung on a pole or hook above something. The lid has a small centra…
1 image
- Title
- Pot
- Date
- 1920 – 1950
- Material
- metal; aluminum;
- Dimensions
- 9.7 x 25.8 x 31.4 cm
- Description
- Aluminum pot with steaming tray insert and lid. The pot has two handles opposite each other and the tray insert has holes throughout the bottom and two wires that, when raised up, intersect in the middle - possibly so that it can be hung on a pole or hook above something. The lid has a small central handle and does not fit the pot well when the steaming tray is inserted.
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0279 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1950
- Material
- wood;
- Catalogue Number
- 104.20.1296
- Description
- Large wooden spoon with a shallow notch carved around the circumference of the top of the handle and a small hole above that.
1 image
- Title
- Wooden Spoon
- Date
- 1920 – 1950
- Material
- wood;
- Dimensions
- 1.5 x 6.9 x 35.6 cm
- Description
- Large wooden spoon with a shallow notch carved around the circumference of the top of the handle and a small hole above that.
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.20.1296
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.