Narrow Results By
- Date
- n.d.
- Material
- metal; rubber
- Catalogue Number
- 104.23.1018
- Description
- A squeegee with a hollow, red metal handle that contains a small hole in it - perhaps so that it can be affixed to an extended handle. The handle is attached to the body of the squeegee with two, gold-coloured screws. There are also two gold-coloured screws on the body of the squeegee on either sid…
1 image
- Title
- Squeegee
- Date
- n.d.
- Material
- metal; rubber
- Dimensions
- 2.5 x 14.5 x 30.5 cm
- Description
- A squeegee with a hollow, red metal handle that contains a small hole in it - perhaps so that it can be affixed to an extended handle. The handle is attached to the body of the squeegee with two, gold-coloured screws. There are also two gold-coloured screws on the body of the squeegee on either side of the handle, which affixes the red/black rubber blade of the squeegee to the body.
- Subject
- Nicholas Morant
- households
- darkroom(?)
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.23.1018
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Photograph Easel
https://archives.whyte.org/en/permalink/artifact104.41.0155
- Date
- 1946 – 1946
- Material
- wood; metal;
- Catalogue Number
- 104.41.0155
- Description
- A Kodak darkroom matting easel that can accommodate paper up to 11x14” in size. Darkroom easels [also called darkroom frames] are used during development to enlarge photographs - they hold the paper flat under the adjustable metal frame and keep the paper properly framed. The easel consists of a wo…
1 image
- Title
- Photograph Easel
- Date
- 1946 – 1946
- Material
- wood; metal;
- Dimensions
- 6.8 x 41.5 x 48.5 cm
- Description
- A Kodak darkroom matting easel that can accommodate paper up to 11x14” in size. Darkroom easels [also called darkroom frames] are used during development to enlarge photographs - they hold the paper flat under the adjustable metal frame and keep the paper properly framed. The easel consists of a wooden base with a raised metal frame around the perimeter - along two sides are wider metal pieces with ruler marks along them. Overlapping in the middle of the board are two adjustable metal pieces that lie flat against the wood. On the left-hand short side is a short metal arm with a spring that can be hooked onto the frame to lift it off the board.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0155
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1950 – 1965
- Material
- metal; plastic; fabric;
- Catalogue Number
- 104.41.0162
- Description
- Large photographic negative enlarger. Mostly made of blue-grey metal, the enlarger consists of a large rectangular base with a support arm rising from the back which holds the enlarging mechanism. Hand-crank wheels on either side of the support arm allows the enlarger to be moved up and down. The t…
1 image
- Title
- Englarger
- Date
- 1950 – 1965
- Material
- metal; plastic; fabric;
- Dimensions
- 140.0 x 40.0 x 74.0 cm
- Description
- Large photographic negative enlarger. Mostly made of blue-grey metal, the enlarger consists of a large rectangular base with a support arm rising from the back which holds the enlarging mechanism. Hand-crank wheels on either side of the support arm allows the enlarger to be moved up and down. The top of the enlarger is a large silver dome [possibly the light] with the black and white fabric-wrapped power cord coming out the top, the dome sits on top of the main blue-grey metal tray where more dials can adjust settings and the tray for inserting the original negative sides out the front, coming out the bottom of the frame is a grey bellows that has the focussing lens on the bottom.
- Subject
- Nicholas Morant
- photography
- photograph equipment
- darkroom
- camera equipment
- photograph developing
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0162
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1930 – 1950
- Material
- wood; metal; plastic; glass;
- Catalogue Number
- 104.41.0163
- Description
- Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger su…
1 image
- Title
- Enlarger
- Date
- 1930 – 1950
- Material
- wood; metal; plastic; glass;
- Dimensions
- 105.0 x 44.5 x 55.7 cm
- Description
- Metal Kodak Precision Enlarger mounted on a wooden board with power outlets and power switch mounted beside the base of the enlarger. The support arm mostly consists of a silver metal pole onto which the dull grey metal enlarger support is mounted - a plastic knob on one side allows the enlarger support to move up and down the support arm. The enlarger itself consists of a shiny metal dome with a fabric-wrapped power cord coming out the top [most likely the house for the light source] mounted on top of the grey metal frame [to which the enlarger support is attached] and into which several different negative trays can be fit, below the frame are dark grey fabric bellows that can be adjusted along a set of metal poles, the bottom of the bellows are attached to a smaller grey metal frame that also houses the focussing lens and a coloured filter that can be rotated in and out of frame.
- Subject
- Nicholas Morant
- photography
- photograph equipment
- camera equipment
- darkroom
- photograph developing;
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0163
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1920 – 1945
- Material
- wood; metal; glass; plastic;
- Catalogue Number
- 104.41.0170
- Description
- Black and silver metal Leitz negative enlarger mounted on a wooden base. The enlarger consists of an almost round light housing with the power cord coming out from the top - immediately below the globe is a series of plates containing the various filters and lenses, as well as the mounting gear tha…
1 image
- Title
- Enlarger
- Date
- 1920 – 1945
- Material
- wood; metal; glass; plastic;
- Dimensions
- 95.8 x 41.7 x 51.9 cm
- Description
- Black and silver metal Leitz negative enlarger mounted on a wooden base. The enlarger consists of an almost round light housing with the power cord coming out from the top - immediately below the globe is a series of plates containing the various filters and lenses, as well as the mounting gear that attaches the enlarger to the silver metal stand. The enlarger is attached to the stand with adjustable arms and a spring that can be released with a small lever so that the device can be moved closer to or further away from the wooden base.
- Credit
- Gift of Nicholas Morant, Banff, 2006
- Catalogue Number
- 104.41.0170
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Developer Tongs
https://archives.whyte.org/en/permalink/artifact104.41.0227%20
- Date
- prior to 1980
- Material
- wood;
- Catalogue Number
- 104.41.0227
- Description
- Wooden printing tongs. Two pieces of flat wood slotted into a solid wood cylinder with enough give in the wood to allow the end of the tongs to touch. On one side of the tongs black text is printed, it reads “DEVELOPER — REXO PRINT TONGS” and a small logo for Burke & James Photo Supplies.
1 image
- Title
- Developer Tongs
- Date
- prior to 1980
- Material
- wood;
- Dimensions
- 1.6 x 2.1 x 24.3 cm
- Description
- Wooden printing tongs. Two pieces of flat wood slotted into a solid wood cylinder with enough give in the wood to allow the end of the tongs to touch. On one side of the tongs black text is printed, it reads “DEVELOPER — REXO PRINT TONGS” and a small logo for Burke & James Photo Supplies.
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0227
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Contact Print Frame
https://archives.whyte.org/en/permalink/artifact104.41.0228%20a-c
- Date
- n.d.
- Material
- wood; glass; metal; felt
- Catalogue Number
- 104.41.0228 a-c
- Description
- A pair of three contact printing frames of various sizes. a) A wooden contact printing frame: wood frame with insert back that is hinged off center. There is white felt on the internal side facing the glass plate. Back held in by metal clips which slide under a lip provided in frame. Stamped on the…
1 image
- Title
- Contact Print Frame
- Date
- n.d.
- Material
- wood; glass; metal; felt
- Dimensions
- 17.6 x 11.9 x 2.1 cm
- Description
- A pair of three contact printing frames of various sizes. a) A wooden contact printing frame: wood frame with insert back that is hinged off center. There is white felt on the internal side facing the glass plate. Back held in by metal clips which slide under a lip provided in frame. Stamped on the back in black text which reads “EASTMAN PRINTING FRAME FOR 3 1/4 x 5 1/3 NEGATIVES” “EASTMAN KODAK CO., ROCHESTER, N.Y. MADE IN U.S.A.”b) A darker wooden contact printing, wood frame with insert back that is hinged off center with a strip of black tape(?) ran across the hinge. There is white felt on the internal side facing the glass plate. Back held in by metal clips which slide under a lip provided in frame. Stamped on the back in black text which reads “EASTMAN KODAK CO. ROCHESTER, N.Y.” “FLEXO MADE IN U.S.A. FOR 4 X 5 PLATES.” 15.4 x 12.8 x 1.9 cm.c) A larger wooden contact printing, wood frame with insert back that is hinged off center with a strip of black tape. There is white felt on the internal side facing the glass plate (which is missing). Back held in by metal clips which slide under a lip provided in frame. At the top is a small loop for possible hanging. 21.4 x 15.0 x 1.8 cm.
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0228 a-c
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- wood; glass; metal; felt
- Catalogue Number
- 104.41.0238 a,b
- Description
- A set of two different wooden contact printing frames.a) The larger of the two contact printing frames. The frame is wooden all the way around with two metal handles on the short side and long side, with black strips of metal that wrap around the handle and are inside the frame, which can be moved.…
1 image
- Title
- Contact Frame
- Date
- n.d.
- Material
- wood; glass; metal; felt
- Dimensions
- 2.1 x 16.5 x 21.4 cm
- Description
- A set of two different wooden contact printing frames.a) The larger of the two contact printing frames. The frame is wooden all the way around with two metal handles on the short side and long side, with black strips of metal that wrap around the handle and are inside the frame, which can be moved. On the back of the frame is an insert back that is hinged off center. There is grey felt on the internal side facing the glass plate, where the two strips of black metal are visible alongside two other strips of black metal in the corner of one side fixed in an L shape, each strip has a small piece of measuring tape(?). Back held in by metal clips which slide under a lip provided in frame. On the back of the frame is stamped text that reads “KODAK AUTO. MASK PRINTING FRAME” “FOR NEGATIVES 4 X 5 3 1/4 X 5 1/2 AND SMALLER” “PAT’D { JULY 14, 1914 NOV. 9, 1915 RE. APR. 18, 1916” “EASTMAN KODAK CO. ROCHESTER, N.Y. MADE In U.S.A.” b) A smaller of the two contact printing frames. The frame is wooden all the way around with an insert back that is hinged off center. There is white felt on the internal side facing the glass plate. The back is held in by metal clips which slide under a lip provided in frame. It is a simpler version of a). 2.1 x 14.4 x 16.9 cm.
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0238 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Photographic Paper
https://archives.whyte.org/en/permalink/artifact104.41.0242
- Date
- n.d.
- Material
- paper
- Catalogue Number
- 104.41.0242
- Description
- An envelope of M & M photo mats. The font of the envelope features a burgundy printed label in a vague art nouveau style, the text reads “POSTAL A” “PRICE 25C (cents)” “M and M” “PHOTOMATTS” “BEAUTY ACCURACY SPEED” “Artistic negatives of frames and borders, with oval, circular and other various sha…
1 image
- Title
- Photographic Paper
- Date
- n.d.
- Material
- paper
- Dimensions
- 15.6 x 10.0 cm
- Description
- An envelope of M & M photo mats. The font of the envelope features a burgundy printed label in a vague art nouveau style, the text reads “POSTAL A” “PRICE 25C (cents)” “M and M” “PHOTOMATTS” “BEAUTY ACCURACY SPEED” “Artistic negatives of frames and borders, with oval, circular and other various shaped openings.” “MILLARD & MANNING 3351 Sheffield Ave, CHICAGO. USA”. Inside is a folded card with detailed directions and more information about the photo mats. The photo mats included inside are 12 photo mats with designs and 3 cut out frames.
- Credit
- Gift of L. A. E Duncan, Calgary, 1980
- Catalogue Number
- 104.41.0242
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- prior to 1977
- Material
- plastic;
- Catalogue Number
- 104.41.0261 a,b
- Description
- A set of two developing trays, one a discoloured cream and the other black. a) A shallow, rectangular, discoloured cream developing tray with “kodak” in the bottom of the tray surrounded by two stripes - above and below. b) A shallow, square, black developing tray with a circle with “EKC” stamped o…
1 image
- Title
- Developing Tray
- Date
- prior to 1977
- Material
- plastic;
- Dimensions
- 2.4 x 22.0 x 15.6 cm
- Description
- A set of two developing trays, one a discoloured cream and the other black. a) A shallow, rectangular, discoloured cream developing tray with “kodak” in the bottom of the tray surrounded by two stripes - above and below. b) A shallow, square, black developing tray with a circle with “EKC” stamped on the bottom of the exterior. 3.7 x 14.5 x 17.3 cm.
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1977
- Catalogue Number
- 104.41.0261 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.