Narrow Results By
Audio Announcer
https://archives.whyte.org/en/permalink/artifact104.01.0007
- Date
- 1960 – 1980
- Material
- metal; plastic; paper;
- Catalogue Number
- 104.01.0007
- Description
- Green metal audio announcer, used to play pre-recorded audio - usually advertisements - during broadcasts like radio programs. The announcer consists of a rectangular body with a black plastic handle at one short end, vent slats at the other, and speakers along both long sides. The top of the box f…
1 image
- Title
- Audio Announcer
- Date
- 1960 – 1980
- Material
- metal; plastic; paper;
- Dimensions
- 16.4 x 14.8 x 22.7 cm
- Description
- Green metal audio announcer, used to play pre-recorded audio - usually advertisements - during broadcasts like radio programs. The announcer consists of a rectangular body with a black plastic handle at one short end, vent slats at the other, and speakers along both long sides. The top of the box features the grey metal housing for the tape cartridge - which also has a plug for an external speaker - the power switch, volume control knob, outlet for a remote to be plugged in, and a brown plastic power cord. All of these features can be covered by a removable hinged lid that latches closed above the carry handle. Also contains the instruction manual.
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 104.01.0007
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1970 – 1985
- Material
- plastic; metal; paper; cardboard;
- Catalogue Number
- 104.01.0004
- Description
- Clear plastic Cousino Echo-matic II self threading tape cartridge in original cardboard box.
1 image
- Title
- Audio Tape
- Date
- 1970 – 1985
- Material
- plastic; metal; paper; cardboard;
- Dimensions
- 2.5 x 9.2 x 13.7 cm
- Description
- Clear plastic Cousino Echo-matic II self threading tape cartridge in original cardboard box.
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 104.01.0004
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Brownie Camera
https://archives.whyte.org/en/permalink/artifact104.41.0176
- Date
- 1901 – 1935
- Material
- leather; metal; cardboard; glass
- Catalogue Number
- 104.41.0176
- Description
- Dark brown/black Kodak No. 2 Brownie camera with a leather strap that has “BROWNIE’ stamped on it on the top, two viewfinders [one on top, one on the right side], a back panel that hinges open to access the film compartment [this compartment is metal and removable], a thin metal rod that rotates th…
1 image
- Title
- Brownie Camera
- Date
- 1901 – 1935
- Material
- leather; metal; cardboard; glass
- Dimensions
- 11.3 x 9.4 x 14.4 cm
- Description
- Dark brown/black Kodak No. 2 Brownie camera with a leather strap that has “BROWNIE’ stamped on it on the top, two viewfinders [one on top, one on the right side], a back panel that hinges open to access the film compartment [this compartment is metal and removable], a thin metal rod that rotates the film inside, and the lever that triggers the lens. Attached to the back is a small rectangular metal plaque with the manufacturer’s details and above it is an embossed stamp that identifies this camera as being “No. 120.”
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 104.41.0176
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1957 – 2010
- Material
- leather; plastic; foam; metal; glass; cardboard;
- Catalogue Number
- 104.41.0178 a,b
- Description
- Red hard-sided Angenieux travel case with chrome caps on the corners, chrome clasps holding the hinged lid closed, and red plastic handles on both short sides. On the left-hand short side is a paper adhesive label with faded writing on it and on the lid is a circular bright orange Head Hunters Film…
1 image
- Title
- Camera Case
- Date
- 1957 – 2010
- Material
- leather; plastic; foam; metal; glass; cardboard;
- Dimensions
- 21.5 x 27.9 x 35.0 cm
- Description
- Red hard-sided Angenieux travel case with chrome caps on the corners, chrome clasps holding the hinged lid closed, and red plastic handles on both short sides. On the left-hand short side is a paper adhesive label with faded writing on it and on the lid is a circular bright orange Head Hunters Films sticker. The interior of the case in lined with sculpted foam meant to hold a cinematic camera lens in the main body and the lid is also lined with foam with a window to display the manufacturer details.Housed inside the case is a Mamiyaflex twinflex camera, a short black cable, and an empty Kodak film box.
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 104.41.0178 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1963 – 1990
- Material
- fabric; leather; metal; plastic; glass;
- Catalogue Number
- 104.41.0180 a-m
- Description
- Green fabric-covered hard-sided travel case with leather corner caps on the lid, leather carry handles on both short sides and on the back [broken], and three leather straps attached to the short sides and the front that overlap over a metal loop on the lid. A metal frame is fixed to the front of t…
1 image
- Title
- Camera Case
- Date
- 1963 – 1990
- Material
- fabric; leather; metal; plastic; glass;
- Dimensions
- 31.5 x 29.5 x 65.8 cm
- Description
- Green fabric-covered hard-sided travel case with leather corner caps on the lid, leather carry handles on both short sides and on the back [broken], and three leather straps attached to the short sides and the front that overlap over a metal loop on the lid. A metal frame is fixed to the front of the lid for the display of a shipping label, various stickers and shipping labels throughout the lid, and a paper Sunshine Village transportation tag hangs from the right-hand handle by a string. The interior is lined with canvas and has blue and white canvas straps attached to the long sides as well as green fabric flaps attached to the short sides and front. Contents include:A - Bolex H16 SB video camera with large lens mount plate and additional side viewfinder attached [empty]B - 230mm Century Tele-Athenar zoom lens in a leather tube carrier extensively covered in adhesive tape at both ends [lid is no longer connected to the body]C - 120mm Angenieux-Zoom Type 10x12 B lens with a small silver metal mount pin screwed into the body about half-way downD - 50mm Asahi Pentax lens [slightly dented along the rim] in a foam-lined grey fabric carry tube that zips closedE - four boxes of 16mm film - two black plastic boxes of Eastman EXR Color Negative Film [one’s label is severely degraded], one red cardboard box of gaf Anscochrome Professional Camera Film, and one green cardboard box of Du Pont 931A safety motion picture film - in a plastic bagF - various lens attachments and spare parts in a grey plastic toiletries bag that zips closedG - a black plastic Shepherd EX-99 handheld electronic flash meter in a black pleather pouch that snaps closedH - various black and grey plastic cables in a brown leather pouch that zips closed [one side of the zipper fabric has completely separated from the leather]I - a green on white nylon ski bib from the 30th Anniversary Engler Veterans Ski Race J - a Bolex paillard cardboard box containing several spare remote triggersK - four spare lens filters - three of which are still in their original yellow Kodak cardboard envelopes - in a small plastic bagL - two round metal containers with various miscellaneous parts - one is silver and one is blackM - spare pieces of Velcro in a small plastic bag
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 104.41.0180 a-m
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Camera Lens Case
https://archives.whyte.org/en/permalink/artifact104.41.0179%20a%2cb
- Date
- 1960 – 1980
- Material
- metal; foam; plastic; glass;
- Catalogue Number
- 104.41.0179 a,b
- Description
- Long and thin silver metal travel case with 2.5 rubber feet on the bottom [one is completely missing, one only partially], two metal clasps holding the hinged lid closed, and a black hard plastic handle on the lid. Several long strips of adhesive tape - mostly silver duct tape - throughout the exte…
1 image
- Title
- Camera Lens Case
- Date
- 1960 – 1980
- Material
- metal; foam; plastic; glass;
- Dimensions
- 14.0 x 12.8 x 54.1 cm
- Description
- Long and thin silver metal travel case with 2.5 rubber feet on the bottom [one is completely missing, one only partially], two metal clasps holding the hinged lid closed, and a black hard plastic handle on the lid. Several long strips of adhesive tape - mostly silver duct tape - throughout the exterior, often obscuring paper labels and something written on the front in marker. The interior of the case is lined with pieces of yellow foam that have been glued in place. Housed inside the case is a black metal 300mm Century Precision Optics Tele-Athenar lens - these lenses were specifically designed for profession motion picture, video, and still photography and was most likely used by Eddie Hunter on Head Hunter Films projects.
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 104.41.0179 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 2000
- Material
- metal; fabric;
- Catalogue Number
- 108.04.0047
- Description
- Pair of black metal crampons, only one has a red and white fabric strap to go over the foot with a silver metal cinch. The crampons consist of two pieces of metal that fit together in a way that lets them expand or contract at one end, depending on the user’s foot size. Each crampon has four spikes…
1 image
- Title
- Crampons
- Date
- 1960 – 2000
- Material
- metal; fabric;
- Dimensions
- 5.5 x 10.3 x 11.3 cm
- Description
- Pair of black metal crampons, only one has a red and white fabric strap to go over the foot with a silver metal cinch. The crampons consist of two pieces of metal that fit together in a way that lets them expand or contract at one end, depending on the user’s foot size. Each crampon has four spikes and two upward extensions through which the strap can be fed.
- Subject
- Eddie Hunter
- hiking
- winter
- outdoor equipment
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 108.04.0047
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1948 – 1990
- Material
- metal; paper;
- Catalogue Number
- 105.05.0026
- Description
- Silver metal film reel frame with the manufacturer’s details stamped into the central hub on both sides, partially covered by several paper adhesive stickers. On one side, several round paper stickers have been placed over the reel mount hole but are illegible due to having been worn down through u…
1 image
- Title
- Film Reel
- Date
- 1948 – 1990
- Material
- metal; paper;
- Dimensions
- 2.1 cm
- Description
- Silver metal film reel frame with the manufacturer’s details stamped into the central hub on both sides, partially covered by several paper adhesive stickers. On one side, several round paper stickers have been placed over the reel mount hole but are illegible due to having been worn down through use. On the other side are two pieces of tape that read “CUSTOMERS REEL [illegible]” / “HEAD HUNTER FILMS” in faded black ink and “TAHOE COMP” in black on a small piece of masking tape.
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 105.05.0026
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1990
- Material
- metal;
- Catalogue Number
- 105.05.0027
- Description
- Silver metal film reel frame with the manufacturer’s details and measurement markers up one spoke stamped into one side - the other side has four adhesive labels that include: a small piece of masking tape with “9B” written in black, a small piece of masking tape with “SKATING” written in black, a …
1 image
- Title
- Film Reel
- Date
- 1960 – 1990
- Material
- metal;
- Dimensions
- 1.9 cm
- Description
- Silver metal film reel frame with the manufacturer’s details and measurement markers up one spoke stamped into one side - the other side has four adhesive labels that include: a small piece of masking tape with “9B” written in black, a small piece of masking tape with “SKATING” written in black, a large square piece of masking tape with “319 A” written in blue, and a strip of fabric tape with “PLEASE RETURN THIS REEL” written in faded red ink underneath “#1 - MINUS OPENING” written in blue.
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 105.05.0027
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1990
- Material
- metal
- Catalogue Number
- 105.05.0028
- Description
- Brown metal film reel frame with the manufacturer details and measurement markers stamped into one side and two small pieces of masking tape on the other side that have “HEAD HUNTER FILMS” and “#2 1140FT” written on them in black ink.
1 image
- Title
- Film Reel
- Date
- 1960 – 1990
- Material
- metal
- Dimensions
- 2.0 cm
- Description
- Brown metal film reel frame with the manufacturer details and measurement markers stamped into one side and two small pieces of masking tape on the other side that have “HEAD HUNTER FILMS” and “#2 1140FT” written on them in black ink.
- Credit
- Gift of Eddie Hunter, Banff, 1995
- Catalogue Number
- 105.05.0028
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.