Narrow Results By
- Date
- 1925 – 1950
- Material
- metal; aluminum; wood;
- Catalogue Number
- 104.19.0272
- Description
- Tall cylindrical aluminum coffee maker/pot with an ventilation cap that fits on top and an internal filter. The main body has a wooden handle screwed into one side, with a short spout opposite it - throughout the portion of the coffee maker that is covered by the spout are small holes. The cap has …
1 image
- Title
- Coffee Maker
- Date
- 1925 – 1950
- Material
- metal; aluminum; wood;
- Dimensions
- 27.5 x 11.2 x 19.1 cm
- Description
- Tall cylindrical aluminum coffee maker/pot with an ventilation cap that fits on top and an internal filter. The main body has a wooden handle screwed into one side, with a short spout opposite it - throughout the portion of the coffee maker that is covered by the spout are small holes. The cap has two roughly-triangular groupings of ventilation holes opposite from each other and the domed top is capped with a small wooden handle. Inside the coffee maker is a metal filter that consists of a thin pole supported by a slightly domed base with a lip just above the middle on which sits the removable filter. No manufacturer details could be found.
- Subject
- coffee maker
- drinks
- kitchen utensil
- Credit
- Gift of Bill Mather, Edmonton, 1991
- Catalogue Number
- 104.19.0272
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1935 – 1960
- Material
- metal
- Catalogue Number
- 104.19.0075 a,b
- Description
- Both are light blue enamel coffeepots with flat bases, ridging on pot near base, hinged domed lids, white enamel interiors.
1 image
- Title
- Coffee Maker
- Date
- 1935 – 1960
- Material
- metal
- Dimensions
- 22.0 x 12.5 x 19.0 cm
- Description
- Both are light blue enamel coffeepots with flat bases, ridging on pot near base, hinged domed lids, white enamel interiors.
- Subject
- households
- kitchen
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0075 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1935 – 1950
- Material
- metal
- Catalogue Number
- 104.19.0076
- Description
- Cylindrical, tall aluminum coffee pot with strainer spout, flat lid which is hinged. Two swivel bracketed handles for pouring and one loop handle for suspension, lifting.
1 image
- Title
- Coffee Maker
- Date
- 1935 – 1950
- Material
- metal
- Dimensions
- 18.0 x 15.0 x 16.5 cm
- Description
- Cylindrical, tall aluminum coffee pot with strainer spout, flat lid which is hinged. Two swivel bracketed handles for pouring and one loop handle for suspension, lifting.
- Subject
- households
- kitchen
- camping
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0076
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1940 – 1960
- Material
- glass; rubber; metal; plastic
- Catalogue Number
- 104.19.0090
- Description
- Double globed coffee percolator consisting of lower portion, glass pot with black handle, inside of which fits upper portion, invert, lidded glass pot with funnel and rubber neck for fitting. "GE" (General Electric) stamp and "T.M. Reg. U.S. Pat. Off. PYREX" stamp on both glass bulb portions, metal…
1 image
- Title
- Coffee Maker
- Date
- 1940 – 1960
- Material
- glass; rubber; metal; plastic
- Dimensions
- 26.7 x 16.0 cm
- Description
- Double globed coffee percolator consisting of lower portion, glass pot with black handle, inside of which fits upper portion, invert, lidded glass pot with funnel and rubber neck for fitting. "GE" (General Electric) stamp and "T.M. Reg. U.S. Pat. Off. PYREX" stamp on both glass bulb portions, metal , stainless, lid on upper glass pot section.
- Subject
- households
- kitchen
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0090
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- glass; metal
- Catalogue Number
- 104.20.0971
- Description
- A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with a flat piece of metal with small holes that acts as the filter. The basket and filter are removable. The coffee maker has a glass handle and a glass lid with a top knob. The lid locks in p…
1 image
- Title
- Coffee Maker
- Date
- n.d.
- Material
- glass; metal
- Dimensions
- 20.5 x 16.0 x 25.0 cm
- Description
- A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with a flat piece of metal with small holes that acts as the filter. The basket and filter are removable. The coffee maker has a glass handle and a glass lid with a top knob. The lid locks in place with two protrusions along the edge. There is a metal band around the centre of the coffee maker. Stamped on the bottom is “7759-B 9 CUP PYREX MADE IN U.S.A.”
- Subject
- Whyte home
- drinking
- coffee
- kitchen tools
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.20.0971
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- n.d.
- Material
- glass; metal
- Catalogue Number
- 104.20.0972
- Description
- A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with two flat pieces of metal with small holes that acts as the filter. The filter is stamped with “MADE IN CANADA” The basket and filter are removable. The coffee maker has a glass handle and …
1 image
- Title
- Coffee Maker
- Date
- n.d.
- Material
- glass; metal
- Dimensions
- 29.0 x 14.0 x 24.0 cm
- Description
- A glass coffee maker consisting of a large cylindrical jug with spout inset with a glass basket on a stem with two flat pieces of metal with small holes that acts as the filter. The filter is stamped with “MADE IN CANADA” The basket and filter are removable. The coffee maker has a glass handle and a glass lid with a top knob. The lid locks in place with two protrusions along the edge. There is a metal band around the centre of the coffee maker. Stamped on the bottom is “7756-B 6 CUP PYREX MADE IN U.S.A.” “PYREX” is also embossed on the handle and engraved on the metal band below an image of flames. “PYREX MADE IN USA” is also on the lid.
- Subject
- Whyte home
- kitchen tools
- coffee
- drinking
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.20.0972
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1960 – 1970
- Material
- metal; wood
- Catalogue Number
- 104.19.0062
- Description
- Contemporary, aluminium lined, copper covered teakettle. Oblate spheroid shape with ridge at girth, and at top is short vertical rim into which a domed, black knobbed lid sits. Two curved, vertical brackets of brass terminate at top in horizontal wood handle, steam hole in lid. Curved spout at gir…
1 image
- Title
- Teakettle
- Date
- 1960 – 1970
- Material
- metal; wood
- Dimensions
- 21.5 x 20.3 x 24.5 cm
- Description
- Contemporary, aluminium lined, copper covered teakettle. Oblate spheroid shape with ridge at girth, and at top is short vertical rim into which a domed, black knobbed lid sits. Two curved, vertical brackets of brass terminate at top in horizontal wood handle, steam hole in lid. Curved spout at girth. Stamp "Made in Portugal" at top of rear brass handle bracket.
- Subject
- households
- kitchen
- decorative
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0062
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1900 – 1935
- Material
- metal; wood
- Catalogue Number
- 104.19.0063
- Description
- Deep, oval teakettle win flat base, straight sides which, at top, terminate in ridged band and slope gently to oval rim opening into which brass knobbed copper lid fits. Two vertical, brass brackets are screwed into pot and hold horizontal wooden handle, long, curved spout on end of kettle contain…
1 image
- Title
- Teakettle
- Date
- 1900 – 1935
- Material
- metal; wood
- Dimensions
- 24.5 x 15.0 x 28.7 cm
- Description
- Deep, oval teakettle win flat base, straight sides which, at top, terminate in ridged band and slope gently to oval rim opening into which brass knobbed copper lid fits. Two vertical, brass brackets are screwed into pot and hold horizontal wooden handle, long, curved spout on end of kettle contains ridge and facet detail.
- Subject
- households
- kitchen
- decorative
- Edith Morse Robb
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0063
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1830 – 1900
- Material
- metal
- Catalogue Number
- 104.19.0064
- Description
- Flat based, deep oval teakettle with straight sides which at top slope inwards and up to oval brass rimmed opening into which rounded copper lid with brass knob fits. Two vertical brass brackets curve up to hold cylindrical, horizontal, hollow copper handle. Long curved spout on one end. Stamped on…
1 image
- Title
- Teakettle
- Date
- 1830 – 1900
- Material
- metal
- Dimensions
- 23.0 x 14.5 x 26.5 cm
- Description
- Flat based, deep oval teakettle with straight sides which at top slope inwards and up to oval brass rimmed opening into which rounded copper lid with brass knob fits. Two vertical brass brackets curve up to hold cylindrical, horizontal, hollow copper handle. Long curved spout on one end. Stamped on bottom a cross hatched pattern with letter "B" within circle, possibly an "R" as well. Stamped in centre of base is "5". Base dented, bottom is dove-tailed to the body.
- Subject
- households
- kitchen
- decorative
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0064
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1900 – 1935
- Material
- metal
- Catalogue Number
- 104.19.0065
- Description
- Flat based, deep, round kettle which gradually widens from base to shoulder where it slopes up and inward to rim into which circular, knobbed copper lid sits. One piece copper handle riveted to top of pot (does not swivel). Affixed, curved spout. Stamp to left of spout "Made in England". Base stamp…
1 image
- Title
- Teakettle
- Date
- 1900 – 1935
- Material
- metal
- Dimensions
- 24.0 x 17.0 x 25.0 cm
- Description
- Flat based, deep, round kettle which gradually widens from base to shoulder where it slopes up and inward to rim into which circular, knobbed copper lid sits. One piece copper handle riveted to top of pot (does not swivel). Affixed, curved spout. Stamp to left of spout "Made in England". Base stamped with triangle containing a rosette and a "T". Brass seen through copper in some areas.
- Subject
- households
- kitchen
- decorative
- Edith Morse Robb
- Credit
- Gift of Catharine Robb Whyte, O. C., Banff, 1979
- Catalogue Number
- 104.19.0065
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.