Narrow Results By
Membership Pin
https://archives.whyte.org/en/permalink/artifact103.09.1215
- Date
- n.d.
- Material
- metal; enamel
- Catalogue Number
- 103.09.1215
- Description
- An oval-shaped silver metal pin with an enamel circle, halfway down, containing a white cross edged with silver on a red background; the circle is surrounded by a silver coiled rope. On top of the circle is a wreathed ibex reaching almost to the top of pin; on the left side of the ibex head is the …
1 image
- Title
- Membership Pin
- Date
- n.d.
- Material
- metal; enamel
- Dimensions
- 5 x 4.8 cm
- Description
- An oval-shaped silver metal pin with an enamel circle, halfway down, containing a white cross edged with silver on a red background; the circle is surrounded by a silver coiled rope. On top of the circle is a wreathed ibex reaching almost to the top of pin; on the left side of the ibex head is the word and lettering, “DIPLOM” and on the right side “FUHRER” with “SBV” on the bottom. Two climbing axes are crossed, the middle part hidden by the enamel circle; on the left of the enamel circle is the top of one climbing axe, two coils of climbing ropes, a water bottle, the bottom point of the crossed axe and loops of coiled ropes. It’s the same on the right hand side except it’s a large blade axe head instead of the water bottle. On the back there are two metal looped horizontal pins attached with a simple bent-wire locking system. The pins are attached to the oval base underneath a soldered metal circle stamped with “Huguenin & Freres and Co.” and under this “Le Locle”.
- Credit
- Gift of Margaret Gmoser, Harvie Heights, 2008
- Catalogue Number
- 103.09.1215
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
Membership Pin
https://archives.whyte.org/en/permalink/artifact103.09.1216
- Date
- 1992
- Material
- metal; enamel; plastic coating
- Catalogue Number
- 103.09.1216
- Description
- Circular metal and enamel pin with the inner circle containing a stylized mountain on the top-third of a segmented globe on a blue enamel background, Above the circle are the letters “UIAGM” and below “IVBV”. The outer ring of the circular pin has these words printed on it “GUIDE DE MONTAGNES GUIDA…
1 image
- Title
- Membership Pin
- Date
- 1992
- Material
- metal; enamel; plastic coating
- Dimensions
- 2.75 cm
- Description
- Circular metal and enamel pin with the inner circle containing a stylized mountain on the top-third of a segmented globe on a blue enamel background, Above the circle are the letters “UIAGM” and below “IVBV”. The outer ring of the circular pin has these words printed on it “GUIDE DE MONTAGNES GUIDA BERGFUHRER”. The front of the pin is coated with clear plastic, presumably for protection from the elements as it must be worn when guiding. The back of the pin has two horizontal hinged pins on two separate pin sets with a swivel-locking safety catch for each of the pins. In between the pin sets is a rectangular box with the letter “K” on top and then “KOFEL-BZ”.
- Credit
- Gift of Margaret Gmoser, Harvie Heights, 2008
- Catalogue Number
- 103.09.1216
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1978 – 1980
- Material
- metal; plastic; paper
- Catalogue Number
- 103.09.1223 a,b
- Description
- Two Parks Canada Mountain Guide badges, one (a) from 1978-79, the other (b) from 1979-80. The badges are similar in that they are the same size and shape, rectangular with rounded corners, plastic coated fronts and metal backs with a horizontal pin set, safety-pin type of clasp with a u-type closur…
1 image
- Title
- Pin
- Date
- 1978 – 1980
- Material
- metal; plastic; paper
- Dimensions
- 7 x 4.3 cm
- Description
- Two Parks Canada Mountain Guide badges, one (a) from 1978-79, the other (b) from 1979-80. The badges are similar in that they are the same size and shape, rectangular with rounded corners, plastic coated fronts and metal backs with a horizontal pin set, safety-pin type of clasp with a u-type closure for the pin. Instead of being soldered to the back, the pin is inserted through and under the backing through two holes.(a) is navy blue (lettering, imaging and numbers) on white background, Parks Canada logo of left bar of Canadian flag and maple leaf in lhc, “Parks Canada” in the middle, “Parcs Canada” rhc. The following words, letters in quotes are directly below each other and centred: “MOUNTAIN” with “GUIDE” in bold underneath, then “DE MONTAGNE”, then number “275”, followed by “1978-79”. “MADE IN CANADA” and “FAIT AU CANADA” have been folded so that they appear on the side.(b) is forest green (lettering, imaging and numbers) on white background, Parks Canada logo of left bar of Canadian flag and maple leaf in top left “Parks Canada” in the middle, “Parcs Canada” on the right; these are top centred on the badge. The following words, letters in quotes are directly below each other and centred: “GUIDE” in bold then in parenthesis “MOUNTAIN - MONTAGNE”, then number “233”, followed by “1979-80”. “Made in Canada” and “Fait au Canada” have been folded so that they appear on the side.
- Credit
- Gift of Margaret Gmoser, Harvie Heights, 2008
- Catalogue Number
- 103.09.1223 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1996
- Material
- metal; plastic; paper
- Catalogue Number
- 103.09.1224
- Description
- A oblong plastic case with an opening to insert the name tag. The plastic case has an extension on the centre top where a metal swivel rivet is attached to a spring snap for clipping onto clothing. The words “SVAR Mod. 41 006” is imprinted under the metal rivet. The two-piece metal snap is connecte…
1 image
- Title
- Pin
- Date
- 1996
- Material
- metal; plastic; paper
- Dimensions
- 9 x 9.3 cm
- Description
- A oblong plastic case with an opening to insert the name tag. The plastic case has an extension on the centre top where a metal swivel rivet is attached to a spring snap for clipping onto clothing. The words “SVAR Mod. 41 006” is imprinted under the metal rivet. The two-piece metal snap is connected by a rivetted spring. The front piece has the letter “E” inside a diamond shape and the letters “I,M,L” inside individual boxes above the rivet. The back piece has four lines etched on the top and “MADE” on one side and “ITALY” on the other. On the inserted paper name tag is the UIAGM logo; a stylized mountain on the top-third of a segmented globe on a blue background, Above the circle are the letters “UIAGM” and below “IVBV”.The outer ring of the circular logo has these words printed on it “GUIDE DE MONTAGNES GUIDA BERGFUHRER”, in the lhc. The word “Kanada” is centred and below the name “Hans Gmoser”. The lettering and logo are very dark blue on a white paper background and a dark blue box surrounding the information.
- Credit
- Gift of Margaret Gmoser, Harvie Heights, 2008
- Catalogue Number
- 103.09.1224
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.