Skip header and navigation

Narrow Results By

59 records – page 1 of 6.

Accessories Guitar Accessories

https://archives.whyte.org/en/permalink/artifact104.34.0008%20a-m
Date
1930 – 1950
Material
metal; wood; ivory; plastic
Catalogue Number
104.34.0008 a-m
Description
A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to t…
  1 image  
Title
Accessories Guitar Accessories
Date
1930 – 1950
Material
metal; wood; ivory; plastic
Dimensions
3.4 cm
Description
A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to the band, tip is crimped in stiff fold, 3 have solder at the tip to form a longer point. (MFG: Fitrite).(b) finger pick set (2.5 x 1.8 x 2.0) six metal rings that fit over the finger tips, adjustable band has circles cut out along it, flame shaped fingernail rises from band, curling inward slightly, and with cut out circle at middle. (mfg: National) (c) finger pick (2.5 x 1.9 x 2.0) as (b) but without cut out circles (mfg: Artisto) (d) finger picks (3.0 x 1.7 x 1.9) two metal bands that wrap around finger tip, widening near the end, then narrowing to a point that extends off to one side of the finger. (e) finger picks (3.5 x 1.5 x 1.9) two flat ivory bands which curl once around finger tip and extend out to one side in a point. (f) pick (3.2 x 2.3 x .1) small, flat, egg shaped, marbleized, grey plastic, stiff. (mfg: Durro). (g) pick (3.0 x 2.2 x .1) as (f) but brown tortoise shell coloured plastic (mfg: Eureka). (h) pick (2.7 x 1.9 x .1) as (f) but transparent yellowed plastic ?, slightly curled. (i) capo (5.3 x 1.9 x .9) flat metal bar with small hooks at either end to hold tightly coiled spring across the under side, lined underneath bar with cork. (mfg: Elton). j) bridge ? (4.7 x .8 x 1.1) a long, half round, hollow metal bar with six incised rings spaced evenly along the length. (mfg: Kamiki). (k) slides (7.2 x 1.7 diam) two heavy, solid, brass rods (used to slide over strings when playing the guitar Hawaiian style) (1) peg (5.0 x .9 x 2.3) white, cast plastic peg with long shaft and flattened key with finger depression each side, ferrules around top of shaft. (m) bridge (4.7 x 1.4 x 1.9) low, unfinished wood bridge with small dark support perpendicularly across under middle, short legs thicken slightly at base, series of small notches across top, some deliberately cut into wood, some worn in odd places from strings (mfg: Grover).
Subject
Whyte home
households
entertainment
pastime
Annie White
music
accessories
equipment
sound
song
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.34.0008 a-m
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Accessories Guitar Accessories

https://archives.whyte.org/en/permalink/artifact104.34.0009%20a-e
Date
1930 – 1950
Material
wood; plastic
Catalogue Number
104.34.0009 a-e
Description
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, …
  1 image  
Title
Accessories Guitar Accessories
Date
1930 – 1950
Material
wood; plastic
Dimensions
5.0 x 1.3 x 0.5 cm
Description
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, high, yellowed, glass like bridge with arced top, and arch under between legs, curved in at sides, and four shallow notches across top. (d) pegs (15.9 x .9 x 1.9) three plain, wooden tuning pegs with straight, tapering shafts, and simple round flat keys at top with depressions for fingers to grasp, small slit cut across bottom, impressed marks from strings around bottom. (e)pick guard (7.8 x 5.2) small, lyre shaped form cut from a thin sheet of tortoiseshell patterned plastic, two pinholes at stem where broken off from something else (a bracket?).
Subject
Whyte home
households
entertainment
pastime
Annie White
music
accessories
equipment
sound
song;
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.34.0009 a-e
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Accessories Violin Accessories

https://archives.whyte.org/en/permalink/artifact104.34.0007%20a-g
Date
1925 – 1950
Material
wood; paper; catgut; shell; metal
Catalogue Number
104.34.0007 a-g
Description
A collection of violin accessories: (a) tailpiece button (3.2 x 1.7 diam) - hard black wood peg with round button head and small dot of nacre inlaid at middle, stocky shaft. (b) peg (6.7 x 1.1 x 2.4) hard black wood peg with long tapering shaft and flattened, depressed, finger grip at end, small …
  1 image  
Title
Accessories Violin Accessories
Date
1925 – 1950
Material
wood; paper; catgut; shell; metal
Dimensions
3.2 cm
Description
A collection of violin accessories: (a) tailpiece button (3.2 x 1.7 diam) - hard black wood peg with round button head and small dot of nacre inlaid at middle, stocky shaft. (b) peg (6.7 x 1.1 x 2.4) hard black wood peg with long tapering shaft and flattened, depressed, finger grip at end, small dot of nacre inlaid at middle of end, tiny hole drilled through shaft nearly halfway up. (c) peg (5.9 x .9 x 2.3) as (b) but slightly smaller, hole through shaft lowe. (d) bridge (4.7 x 3.9 x .5) cut out of unfinished wood with scrolled carving at sides around short legs and at middle, arched top with four shallow notches for strings. Marks: on side, "PANPI (TC monogram trademark)" (e) bridge (4.5 x 3.2 x .5) as (d). Marks: on side, "VUILL?TIME", penciled "10" (f) string package (5.5 x 5.4) white paper envelope holding "Muller's Eternelle First violin string" with accompanying product blurb printed in black, holds coiled catgut string with tiny yellow loop at one end (unused) (g) string package (7.3 x 7.2) cellophane envelope with paper label of same size slipped inside with slits cut to hold string, label printed in black with "The Bernhardt String made of silver steel (trademark)/ violin E", contains two coiled strings, 1 broken of catgut, and the other of very fine wire (e string) wrapped with yellow at one end, (unsure if string is original one of envelope, catgut string definitely not).
Subject
Whyte home
households
entertainment
pastime
Annie White
music
sound
song
musical equipment
accessories
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.34.0007 a-g
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1910 – 1930
Material
wood; paper; metal; plastic; steel
Catalogue Number
104.34.1001 a-d
Description
Martin steel string with case and strings; (a) guitar (96.5 x 34.5 x 10.5); fine hardwood construction, blond face,red/brown body and neck, ebony finger board and bridge base; "French" ivory rim, bridge, string pegs and tuning pegs; small "Mother of Pearl" diamond shaped position marks; silver-co…
  1 image  
Title
Acoustic Guitar
Date
1910 – 1930
Material
wood; paper; metal; plastic; steel
Dimensions
34.5 x 86.5 cm
Description
Martin steel string with case and strings; (a) guitar (96.5 x 34.5 x 10.5); fine hardwood construction, blond face,red/brown body and neck, ebony finger board and bridge base; "French" ivory rim, bridge, string pegs and tuning pegs; small "Mother of Pearl" diamond shaped position marks; silver-coloured plates on side of head with engraving; burned stamp inside of body: "C F Martin & Co Nazarath, PA"; on neck block: "29990"; stamped on head: "Made in USA" plus same as inside body; (b) case: black pressed paper with purple velvet lining; metal fittings; enclosed box in neck area; (c) 3 "Black Diamond String" envelopes; with coiled strings; various used coiled strings (strings removed form guitar) (d) 13 pieces of various musical notations for chords and tunes.
Subject
households
music
Edmee Moore
C.F. Martin
Credit
Gift of Charles C. Reid, Banff, Alberta, 1986
Catalogue Number
104.34.1001 a-d
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1905 – 1915
Material
metal
Catalogue Number
105.03.1008
Description
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
  1 image  
Title
Amplifying Horn
Date
1905 – 1915
Material
metal
Dimensions
55.0 cm
Description
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
Subject
households
entertainment
music
Credit
Gift of Marika McCaffrey, Banff, 1998
Catalogue Number
105.03.1008
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1945 – 1955
Material
wood, bamboo
Catalogue Number
104.33.0009
Description
Two hollow different sized bamboo tubes with half of each tube cut away, lengthwise, at the top. The tubes are each suspended, by a crescent shaped hole near the top, on two bamboo sticks and braced between three tall verticals of split bamboo in a row forming a frame around the tubes. The base of…
  1 image  
Title
Anklung
Date
1945 – 1955
Material
wood, bamboo
Dimensions
39.0 x 4.2 x 25.2 cm
Description
Two hollow different sized bamboo tubes with half of each tube cut away, lengthwise, at the top. The tubes are each suspended, by a crescent shaped hole near the top, on two bamboo sticks and braced between three tall verticals of split bamboo in a row forming a frame around the tubes. The base of the frame is another hollow tube with two square holes at the top where the legs of suspended tubes attach.
Subject
households, music
hobbies
crafts
carving
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
104.33.0009
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
prior to 1970
Material
skin; metal
Catalogue Number
103.01.3021 a,b
Description
Two heavy leather straps with leather thongs attached to the ends of the straps (a - 62.0 cm long with thongs, b - 67.0 cm long with thongs). Each strap has four round metal bells (4.0 cm diameter) tied on with leather thongs. White adhesive tape has been wrapped around the straps.
  1 image  
Title
Armband
Date
prior to 1970
Material
skin; metal
Dimensions
3.0 x 31.0 cm
Description
Two heavy leather straps with leather thongs attached to the ends of the straps (a - 62.0 cm long with thongs, b - 67.0 cm long with thongs). Each strap has four round metal bells (4.0 cm diameter) tied on with leather thongs. White adhesive tape has been wrapped around the straps.
Subject
Indigenous
regalia
dancing
music
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
103.01.3021 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1925 – 1950
Material
metal, brass; fibre
Catalogue Number
104.33.0005 a,b
Description
A pair of brass bells, each shaped like a clamshell, cast with a raised scrolled face-like design with two knobby eyes on each side and a slit at the mouth. A small pebble (clay?) is loose inside and acts as the clapper. Each bell has a square handle at the top with a hole pierced through the han…
  1 image  
Title
Bell
Date
1925 – 1950
Material
metal, brass; fibre
Dimensions
5.5 x 4.0 x 5.0 cm
Description
A pair of brass bells, each shaped like a clamshell, cast with a raised scrolled face-like design with two knobby eyes on each side and a slit at the mouth. A small pebble (clay?) is loose inside and acts as the clapper. Each bell has a square handle at the top with a hole pierced through the handle and a red cord loop tied on.
Subject
crafts
metalwork
animals
music
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
104.33.0005 a,b
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1880 – 1930
Material
glass; ceramic; metal
Catalogue Number
105.03.0003
Description
A handblown cranberry red glass bell with a clear glass handle. A bead striker hangs inside on a round-link metal chain.
  1 image  
Title
Bell
Date
1880 – 1930
Material
glass; ceramic; metal
Dimensions
31.5 cm
Description
A handblown cranberry red glass bell with a clear glass handle. A bead striker hangs inside on a round-link metal chain.
Subject
households
music
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
105.03.0003
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1930 – 1940
Material
wood
Catalogue Number
105.03.0004
Description
A squared flat bell of carved wood with a tree carved on the body of the bell and a flat diamond shaped handle with incised lines. A sticker inside the bell is marked “No. 693-2 Bali Indonesia S.S.S.”
  1 image  
Title
Bell
Date
1930 – 1940
Material
wood
Dimensions
14.0 cm
Description
A squared flat bell of carved wood with a tree carved on the body of the bell and a flat diamond shaped handle with incised lines. A sticker inside the bell is marked “No. 693-2 Bali Indonesia S.S.S.”
Subject
souvenirs
music
crafts
carving
Credit
Gift of Pearl Evelyn Moore, Banff, 1979
Catalogue Number
105.03.0004
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

59 records – page 1 of 6.

Back to Top