Narrow Results By
Handknit Stocking
https://archives.whyte.org/en/permalink/artifact103.03.1061%20a%2cb
- Date
- prior to 1930
- Material
- fibre; metal
- Catalogue Number
- 103.03.1061 a,b
- Description
- One stocking in the making. Very fine knitting, needles are 1.0 mm thick. Ribbed at the top, which would be below the knee, it narrows at the ankle, heel is turned, and the knitting stops half way to the toes, needles intact. (b) 52.0 long and 12.0 wide at opening, this is a long stocking shaped…
1 image
- Title
- Handknit Stocking
- Date
- prior to 1930
- Material
- fibre; metal
- Dimensions
- 13.5 x 36.5 cm
- Description
- One stocking in the making. Very fine knitting, needles are 1.0 mm thick. Ribbed at the top, which would be below the knee, it narrows at the ankle, heel is turned, and the knitting stops half way to the toes, needles intact. (b) 52.0 long and 12.0 wide at opening, this is a long stocking shaped tube of fine cotton, however there is no indication for a heel.
- Credit
- Gift of Charles C. Reid, Banff, Alberta, 1986
- Catalogue Number
- 103.03.1061 a,b
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.
- Date
- 1925 – 1950
- Material
- wood; metal; fibre, flax
- Catalogue Number
- 104.45.0005
- Description
- A very crude home made lace loom. There is a flat board as a base with two square wooden pieces standing at each end, in the corners, with round dowel roller beams between them supported through holes at the centre of each side piece. The front has a narrow board nailed between the two square piec…
1 image
- Title
- Lace Loom
- Date
- 1925 – 1950
- Material
- wood; metal; fibre, flax
- Dimensions
- 8.0 x 17.5 x 30.0 cm
- Description
- A very crude home made lace loom. There is a flat board as a base with two square wooden pieces standing at each end, in the corners, with round dowel roller beams between them supported through holes at the centre of each side piece. The front has a narrow board nailed between the two square pieces, and the back has a wire mesh screen panel to act as the reed. An ecru linen thread warp is wound on a back roller, passes through holes in the screen, and is placed in tension (maintained by nails through rollers). The lace, woven with threaded needles, has been wound on a forward roller as it was completed. There are strips of elastic and cotton around the middle of the loom (to help with tension?).
- Subject
- households
- hobbies
- crafts
- needlework
- weaving
- Credit
- Gift of Pearl Evelyn Moore, Banff, 1979
- Catalogue Number
- 104.45.0005
Images
This material is presented as originally created; it may contain outdated cultural descriptions and
potentially offensive content.
Read more.