Skip header and navigation

Narrow Results By

24 records – page 1 of 3.

Accessories Guitar Accessories

https://archives.whyte.org/en/permalink/artifact104.34.0008%20a-m
Date
1930 – 1950
Material
metal; wood; ivory; plastic
Catalogue Number
104.34.0008 a-m
Description
A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to t…
  1 image  
Title
Accessories Guitar Accessories
Date
1930 – 1950
Material
metal; wood; ivory; plastic
Dimensions
3.4 cm
Description
A collection of odd guitar accessories. (a) finger pick set (3.4 x 2.0 diam) four metal frames that fit over the finger tip,Y-shaped with the arms of the Y forming an adjustable band that fits around finger, and the stem of the Y passing up over the tip of the finger and down the back halfway to the band, tip is crimped in stiff fold, 3 have solder at the tip to form a longer point. (MFG: Fitrite).(b) finger pick set (2.5 x 1.8 x 2.0) six metal rings that fit over the finger tips, adjustable band has circles cut out along it, flame shaped fingernail rises from band, curling inward slightly, and with cut out circle at middle. (mfg: National) (c) finger pick (2.5 x 1.9 x 2.0) as (b) but without cut out circles (mfg: Artisto) (d) finger picks (3.0 x 1.7 x 1.9) two metal bands that wrap around finger tip, widening near the end, then narrowing to a point that extends off to one side of the finger. (e) finger picks (3.5 x 1.5 x 1.9) two flat ivory bands which curl once around finger tip and extend out to one side in a point. (f) pick (3.2 x 2.3 x .1) small, flat, egg shaped, marbleized, grey plastic, stiff. (mfg: Durro). (g) pick (3.0 x 2.2 x .1) as (f) but brown tortoise shell coloured plastic (mfg: Eureka). (h) pick (2.7 x 1.9 x .1) as (f) but transparent yellowed plastic ?, slightly curled. (i) capo (5.3 x 1.9 x .9) flat metal bar with small hooks at either end to hold tightly coiled spring across the under side, lined underneath bar with cork. (mfg: Elton). j) bridge ? (4.7 x .8 x 1.1) a long, half round, hollow metal bar with six incised rings spaced evenly along the length. (mfg: Kamiki). (k) slides (7.2 x 1.7 diam) two heavy, solid, brass rods (used to slide over strings when playing the guitar Hawaiian style) (1) peg (5.0 x .9 x 2.3) white, cast plastic peg with long shaft and flattened key with finger depression each side, ferrules around top of shaft. (m) bridge (4.7 x 1.4 x 1.9) low, unfinished wood bridge with small dark support perpendicularly across under middle, short legs thicken slightly at base, series of small notches across top, some deliberately cut into wood, some worn in odd places from strings (mfg: Grover).
Subject
Whyte home
households
entertainment
pastime
Annie White
music
accessories
equipment
sound
song
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.34.0008 a-m
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Accessories Guitar Accessories

https://archives.whyte.org/en/permalink/artifact104.34.0009%20a-e
Date
1930 – 1950
Material
wood; plastic
Catalogue Number
104.34.0009 a-e
Description
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, …
  1 image  
Title
Accessories Guitar Accessories
Date
1930 – 1950
Material
wood; plastic
Dimensions
5.0 x 1.3 x 0.5 cm
Description
A collection of odd, stringed instrument accessories. (a) bridge (5.0 x 1.3 x .5) long, squared, wood, with low legs thicker at base, four shallow notches evenly spaced across top, for ukulele?( b) bridge (4.4 x 1.7 x .6) as (a) but taller and not as long. (c) bridge (2.7 x 2.1 x .3) a small, high, yellowed, glass like bridge with arced top, and arch under between legs, curved in at sides, and four shallow notches across top. (d) pegs (15.9 x .9 x 1.9) three plain, wooden tuning pegs with straight, tapering shafts, and simple round flat keys at top with depressions for fingers to grasp, small slit cut across bottom, impressed marks from strings around bottom. (e)pick guard (7.8 x 5.2) small, lyre shaped form cut from a thin sheet of tortoiseshell patterned plastic, two pinholes at stem where broken off from something else (a bracket?).
Subject
Whyte home
households
entertainment
pastime
Annie White
music
accessories
equipment
sound
song;
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.34.0009 a-e
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Accessories Violin Accessories

https://archives.whyte.org/en/permalink/artifact104.34.0007%20a-g
Date
1925 – 1950
Material
wood; paper; catgut; shell; metal
Catalogue Number
104.34.0007 a-g
Description
A collection of violin accessories: (a) tailpiece button (3.2 x 1.7 diam) - hard black wood peg with round button head and small dot of nacre inlaid at middle, stocky shaft. (b) peg (6.7 x 1.1 x 2.4) hard black wood peg with long tapering shaft and flattened, depressed, finger grip at end, small …
  1 image  
Title
Accessories Violin Accessories
Date
1925 – 1950
Material
wood; paper; catgut; shell; metal
Dimensions
3.2 cm
Description
A collection of violin accessories: (a) tailpiece button (3.2 x 1.7 diam) - hard black wood peg with round button head and small dot of nacre inlaid at middle, stocky shaft. (b) peg (6.7 x 1.1 x 2.4) hard black wood peg with long tapering shaft and flattened, depressed, finger grip at end, small dot of nacre inlaid at middle of end, tiny hole drilled through shaft nearly halfway up. (c) peg (5.9 x .9 x 2.3) as (b) but slightly smaller, hole through shaft lowe. (d) bridge (4.7 x 3.9 x .5) cut out of unfinished wood with scrolled carving at sides around short legs and at middle, arched top with four shallow notches for strings. Marks: on side, "PANPI (TC monogram trademark)" (e) bridge (4.5 x 3.2 x .5) as (d). Marks: on side, "VUILL?TIME", penciled "10" (f) string package (5.5 x 5.4) white paper envelope holding "Muller's Eternelle First violin string" with accompanying product blurb printed in black, holds coiled catgut string with tiny yellow loop at one end (unused) (g) string package (7.3 x 7.2) cellophane envelope with paper label of same size slipped inside with slits cut to hold string, label printed in black with "The Bernhardt String made of silver steel (trademark)/ violin E", contains two coiled strings, 1 broken of catgut, and the other of very fine wire (e string) wrapped with yellow at one end, (unsure if string is original one of envelope, catgut string definitely not).
Subject
Whyte home
households
entertainment
pastime
Annie White
music
sound
song
musical equipment
accessories
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.34.0007 a-g
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1960 – 1980
Material
metal; plastic; paper;
Catalogue Number
104.01.0007
Description
Green metal audio announcer, used to play pre-recorded audio - usually advertisements - during broadcasts like radio programs. The announcer consists of a rectangular body with a black plastic handle at one short end, vent slats at the other, and speakers along both long sides. The top of the box f…
  1 image  
Title
Audio Announcer
Date
1960 – 1980
Material
metal; plastic; paper;
Dimensions
16.4 x 14.8 x 22.7 cm
Description
Green metal audio announcer, used to play pre-recorded audio - usually advertisements - during broadcasts like radio programs. The announcer consists of a rectangular body with a black plastic handle at one short end, vent slats at the other, and speakers along both long sides. The top of the box features the grey metal housing for the tape cartridge - which also has a plug for an external speaker - the power switch, volume control knob, outlet for a remote to be plugged in, and a brown plastic power cord. All of these features can be covered by a removable hinged lid that latches closed above the carry handle. Also contains the instruction manual.
Subject
Eddie Hunter
advertisements
audio equipment
sound recording;
Credit
Gift of Eddie Hunter, Banff, 1995
Catalogue Number
104.01.0007
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1970 – 1985
Material
plastic; metal; paper; cardboard;
Catalogue Number
104.01.0004
Description
Clear plastic Cousino Echo-matic II self threading tape cartridge in original cardboard box.
  1 image  
Title
Audio Tape
Date
1970 – 1985
Material
plastic; metal; paper; cardboard;
Dimensions
2.5 x 9.2 x 13.7 cm
Description
Clear plastic Cousino Echo-matic II self threading tape cartridge in original cardboard box.
Subject
Eddie Hunter
movie making
sound equipment
audio equipment;
Credit
Gift of Eddie Hunter, Banff, 1995
Catalogue Number
104.01.0004
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

Chin Rest Violin Accessories

https://archives.whyte.org/en/permalink/artifact104.34.0006
Date
1950 – 1960
Material
wood; metal; wood; fibre
Catalogue Number
104.34.0006
Description
A black, spoon shaped chin rest with metal brackets. Carved wood with very gentle depression to cup chin, and short, curved arm to one side. Small, flat pieces of cork glued underneath at points that will rest on violin. U-shaped bracket of steel which adjusts by turnbuckles, hanging down from sid…
  1 image  
Title
Chin Rest Violin Accessories
Date
1950 – 1960
Material
wood; metal; wood; fibre
Dimensions
5.5 x 4.4 x 10.7 cm
Description
A black, spoon shaped chin rest with metal brackets. Carved wood with very gentle depression to cup chin, and short, curved arm to one side. Small, flat pieces of cork glued underneath at points that will rest on violin. U-shaped bracket of steel which adjusts by turnbuckles, hanging down from side of chin rest, clamps to edge of violin. Bottom bar lined fastened to bracket by twisted multi strand wire. Marks: stamped into metal under bar of bracket, "made in Germany" Note: felt loose.
Subject
Whyte home
households
entertainment
pastime
Annie White
music
sound
song
musical equipment
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.34.0006
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

A decolonizing ear : documentary film disrupts the archive

https://archives.whyte.org/en/permalink/catalogue25700
Medium
Library - Book (including soft-cover and pamphlets)
Published Date
2023
Author
Landry, Olivia
Publisher
Toronto ; Buffalo ; London : University of Toronto Press
Call Number
03 L23a
Author
Landry, Olivia
Publisher
Toronto ; Buffalo ; London : University of Toronto Press
Published Date
2023
Physical Description
xi, 218 pages : illustrations ; 24 cm
Medium
Library - Book (including soft-cover and pamphlets)
Subjects
Anthropology
Sound recordings
Archives
Decolonization
Abstract
The recording of Indigenous voices is one of the most well-known methods of colonial ethnography. In A Decolonizing Ear, Olivia Landry offers a skeptical account of listening as a highly mediated and extractive act, influenced by technology and ideology. Returning to early ethnographic practices of voice recording and archiving at the turn of the twentieth century, with a particular focus on the German paradigm, she reveals the entanglement of listening in the logic of Euro-American empire and the ways in which contemporary films can destabilize the history of colonial sound reproduction. Landry provides close readings of several disparate documentary films from the late 1990s and the early 2000s. The book pays attention to technology and knowledge production to examine how these films employ recordings plucked from different colonial sound archives and disrupt their purposes. Drawing on film and documentary studies, sound studies, German studies, archival studies, postcolonial studies, and media history, A Decolonizing Ear develops a method of decolonizing listening from the insights provided by the films themselves. -- Provided by publisher.
Contents
Introduction: The phonograph on film -- Colonial listening and making of a sound archive -- Decolonizing listening: a methodology in three parts -- The noise of decolonial listening: From here to here and the halfmoon files -- (Re-)sounding autoethnography in Marlon Fuentes's bontoc eulogy -- Weird machines and disembodied voices: audio evangelism in the tailenders -- Conclusion: sinister listening and its afterlives
ISBN
9781487544850
Accession Number
P2023.10
Call Number
03 L23a
Collection
Archives Library
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
ca. 1930 – 1950
Material
metal; cable; glass
Catalogue Number
105.05.0044
Description
A black, heavy, cast iron-like Apollo Sound 16mm film projector. It has a unique shape with an art deco type styling. One side of the projector features a switch and silver metal knobs where the tightly coiled spring would be placed to move the film. There is a label with instruction but is illegib…
  1 image  
Title
Film Projector
Date
ca. 1930 – 1950
Material
metal; cable; glass
Dimensions
37.2 x 14.8 x 38.3 cm
Description
A black, heavy, cast iron-like Apollo Sound 16mm film projector. It has a unique shape with an art deco type styling. One side of the projector features a switch and silver metal knobs where the tightly coiled spring would be placed to move the film. There is a label with instruction but is illegible due to wear, herringbone-shaped cut-outs below that expose some of the mechanisms of the projector, next to these cut-outs is where the power cord connects to the projector, and towards the front of the projector is another cord that becomes wire that is wrapped around a smaller spool. Along the back side, in raised letters, text reads “APOLLO [vertical] SOUND [horizontal]”. On the very back of the projector are two switches and a black knob that props the back of the projector up slightly. The other side of the projector is the same raised text that reads “APOLLO [vertical] SOUND [horizontal]” near the back, and there is also a a sloped pattern cut-out near the bottom that exposes the fan of the projector. This side features the main part of the projector with the lens, reels, and the track for the film. The top of the projector features a handle-like design.
Subject
film
16mm film
projector
Apollo Sound
Credit
Gift of Dan MacDonald, Calgary, 1993
Catalogue Number
105.05.0044
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Artist
Janet Cardiff (1957 – , Canadian)
Date
1991
Medium
compat disc
Catalogue Number
CdJ.26.01 a-j
Description
Compact disc audiowalk. Recorded using binaural sound. The walk guides listeners through the forest surrounding the Banff Centre. This was the first audio walk produced by Janet Cardiff. Six copies were made for the museum.The CDs Discman and headphones were loaned to the Banff Centre. We now …
  1 image  
Artist
Janet Cardiff (1957 – , Canadian)
Title
Forest Walk
Date
1991
Medium
compat disc
Description
Compact disc audiowalk. Recorded using binaural sound. The walk guides listeners through the forest surrounding the Banff Centre. This was the first audio walk produced by Janet Cardiff. Six copies were made for the museum.The CDs Discman and headphones were loaned to the Banff Centre. We now have 9 cds plus one (f) that was returned blank and one USB
Subject
sound recording
Banff Centre
forest
Banff townsite
Credit
Gift of Janet Cardiff, Lethbridge, 2000
Catalogue Number
CdJ.26.01 a-j
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.
Date
1900 – 1930
Material
metal
Catalogue Number
104.36.0003
Description
Lyre shaped cast iron frame with a third cast iron leg from the top of the harp down the middle between the outer legs. A double, flat, flexible, thin, vibrating tongue passes down on either side of the central leg to the end of the harp where the ends turn up at sharp right angles, ending in wire …
  1 image  
Title
Jew's Harp
Date
1900 – 1930
Material
metal
Dimensions
2.2 x 5.6 x 6.9 cm
Description
Lyre shaped cast iron frame with a third cast iron leg from the top of the harp down the middle between the outer legs. A double, flat, flexible, thin, vibrating tongue passes down on either side of the central leg to the end of the harp where the ends turn up at sharp right angles, ending in wire like hooks. The flexible tongue tapers from .3 cm wide to less than .1 cm at the hooked end. A series of three small, shallow, notches in the middle of each outer leg on the under side.
Subject
Whyte home
households
entertainment
pastime
Annie White
music
sound
song
accessories
equipment
Credit
Gift of Catharine Robb Whyte, O. C., Banff, 1979
Catalogue Number
104.36.0003
Images
Less detail
This material is presented as originally created; it may contain outdated cultural descriptions and potentially offensive content. Read more.

24 records – page 1 of 3.

Back to Top