Kelty framepack, red nylon fabric pack with aluminum frame, padded shoulder straps and hip belt. Manufacturer’s label on top flap of pack: “KELTY Pack. SUN VALLEY, CALIF. 91352”
Kelty framepack, red nylon fabric pack with aluminum frame, padded shoulder straps and hip belt. Manufacturer’s label on top flap of pack: “KELTY Pack. SUN VALLEY, CALIF. 91352”
Pair of rubber soled, leather uppers laced women's outdoor boot, moulded rubber sole and foot, chgain design tread, written on heel back "Maine Hunting Shoe, L. L. Beane Inc. Freeport, Me." and arch: "Made in the USA", leather uppers sewn on to shoe, 7 eyes for round woven laces, full tongue sewn t…
Pair of rubber soled, leather uppers laced women's outdoor boot, moulded rubber sole and foot, chgain design tread, written on heel back "Maine Hunting Shoe, L. L. Beane Inc. Freeport, Me." and arch: "Made in the USA", leather uppers sewn on to shoe, 7 eyes for round woven laces, full tongue sewn to sides, extra piece of leather up back of boot has a loop sewn at end to form pull tab.
Camera, accesories and instruction booklets in a black case with metal hinges and clasp. The camera is a “POLAROID LAND CAMERA 360” with a flash, bellows and instructions printed on various parts of the camera. The case also contains empty film packs, instruction booklets, an electronic flash, a ch…
Camera, accesories and instruction booklets in a black case with metal hinges and clasp. The camera is a “POLAROID LAND CAMERA 360” with a flash, bellows and instructions printed on various parts of the camera. The case also contains empty film packs, instruction booklets, an electronic flash, a charger for the flash unit, two batteries, and a “POLAROID CLOSE-UP KIT” in a white and grey plastic case. There is also a receipt and business card from “Super S Drugs Ltd.” The address on the card is “Head Office - 14th Street S. W. at 11th and 12th Avenues CALGARY 3, CANADA.”
Instantmatic with flash and bulbs in case; grey plastic body, colour black and white selection knob with manufacturer's name on face plate; fitted lens; viewfinder window top left corner; camera back release on bottom next to film advance knob; cloth strap;viewfinder eyepiece top left corner; frame…
Instantmatic with flash and bulbs in case; grey plastic body, colour black and white selection knob with manufacturer's name on face plate; fitted lens; viewfinder window top left corner; camera back release on bottom next to film advance knob; cloth strap;viewfinder eyepiece top left corner; frame number window in middle of back; 2 sockets for flash attachment; red button on top for shutter release; flash attachment - 2 brass prongs on bottom; reflective concave dish with bulb socket in centre; red button on back for releasing spent bulbs; screw for opening to insert batteries; 2 packages "Sylvania" flashbulbs; hard grey plastic case; depressions inside for flash and camera.
An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
Dull grey travel case with shiny metal corner brackets, reinforcements along the edges, handle on the lid, and two lockable clasps. A black label underneath the handle on the lid reads “ASAHI PENTAX 6x7 TAKUMAR 1:4 f=600mm ASAHI OPT. CO. JAPAN.” Attached to the handle is a brown leather travel tag …
Dull grey travel case with shiny metal corner brackets, reinforcements along the edges, handle on the lid, and two lockable clasps. A black label underneath the handle on the lid reads “ASAHI PENTAX 6x7 TAKUMAR 1:4 f=600mm ASAHI OPT. CO. JAPAN.” Attached to the handle is a brown leather travel tag with a clear plastic window - visible through the window is a white card that reads “N Morant Special Photographer Public Relations and Advertising Canadian Pacific Banff, Alberta.”The interior of the case is lined with red velvet and consists of different-shaped supports throughout the main body and inside the lid. Case most likely used to house Pentax camera bodies and lenses.
Black hard-sided travel case with silver metal brackets on the corners and, two metal clasps holding the hinged lid closed, a central slide lock [unlocked], metal loop attachments on both short sides [possibly for a carry strap], and a leather handle attached to the lid with metal loops. The exteri…
Black hard-sided travel case with silver metal brackets on the corners and, two metal clasps holding the hinged lid closed, a central slide lock [unlocked], metal loop attachments on both short sides [possibly for a carry strap], and a leather handle attached to the lid with metal loops. The exterior of the case has the remnants of several different shipping labels [mostly on the front], a piece of masking tape along the right-hand side of the lid has “PENTAX 6x7” written in blue ink, and “FRAGILE” stenciled in white along the lid. The interior is lined in blue velvet - the body of the case is divided into two compartments and there are velvet-covered spacers in the larger compartment and in the lid to keep contents from shifting. Inside the case is a fabric camera strap still in its original plastic packaging, a wood and metal handle camera attachment in its original Asahi cardboard box [the box has several strips of masking tape throughout, none of which keep it closed], an Asahi Pentax lens hood in a black leather pouch, and a screw.
A Mamiya twin reflex lens with a plastic lens cap housed in a leather case lined with red velvet. The lens has a solid metal mount where it fits into a camera. Both lenses are 1:4.5 f=18cm.The case has a leather hinged lid, leather brackets on both short sides where a strap could be attached, and i…
A Mamiya twin reflex lens with a plastic lens cap housed in a leather case lined with red velvet. The lens has a solid metal mount where it fits into a camera. Both lenses are 1:4.5 f=18cm.The case has a leather hinged lid, leather brackets on both short sides where a strap could be attached, and is held closed with a snap on a leather tab.
Cast aluminum, Chic Scott's, pair "Hiebler Steigklemme" 2 part construction, 10.0 long bar with 1.5 dia. rope hole on end. Other end has a shaped brake clamp, spring loaded. Manufacturer's stamp on side bar: "SALEWA", other side "Jn.U.A.Pat.ang.".
Cast aluminum, Chic Scott's, pair "Hiebler Steigklemme" 2 part construction, 10.0 long bar with 1.5 dia. rope hole on end. Other end has a shaped brake clamp, spring loaded. Manufacturer's stamp on side bar: "SALEWA", other side "Jn.U.A.Pat.ang.".
Red nylon belay seat, Chic Scott's. Seat is red nylon, a 2.5 wide nylon strap is sewn onto seat across the top and bottom. The strap is continuous and has 2 long loops both sides. The loops are ca. 45.0 long but both have knots tied near the ends. Numerous holes and tears throughout. Felt pen: "BK…
Red nylon belay seat, Chic Scott's. Seat is red nylon, a 2.5 wide nylon strap is sewn onto seat across the top and bottom. The strap is continuous and has 2 long loops both sides. The loops are ca. 45.0 long but both have knots tied near the ends. Numerous holes and tears throughout. Felt pen: "BK".
3 piece brake bar, Chic Scott's. Each loop 1.0 dia. rod, 10.2x5.0, with 5.5 long gate opening. 2 outer loops have a solid locking bar 6.3x1.5, one side rounded. "Cmi" stamped on crossbars, system caused extreme wear on ropes, and fell into disrepute.
3 piece brake bar, Chic Scott's. Each loop 1.0 dia. rod, 10.2x5.0, with 5.5 long gate opening. 2 outer loops have a solid locking bar 6.3x1.5, one side rounded. "Cmi" stamped on crossbars, system caused extreme wear on ropes, and fell into disrepute.
Aluminum "D" ring, Chic Scott's. Solid aluminum rods, shaped into typical "D" carabiner, spring loaded latch 5.0 long on short side. Embossed on long side "P.ALLAIN 1600 Kg", other side"BREVETE S G D G".
Aluminum "D" ring, Chic Scott's. Solid aluminum rods, shaped into typical "D" carabiner, spring loaded latch 5.0 long on short side. Embossed on long side "P.ALLAIN 1600 Kg", other side"BREVETE S G D G".
7 various climbing chocks: 1 #9 hexcentric chock manufactured by Chouinard Equipment, slung with purple nylon rope; 1 smaller hexcentric chock, slung with purple and orange nylon perlon; 3 wedge chocks, various sizes, possibly custom machined, 1 slung with purple and orange nylon perlon and 2 slung with orange and purple nylon perlon; 2 wire copperheads (chocks) slung with metal cable and suaged with copper.
Aluminum ring with hemp strap, Chic Scott's. Solid aluminum ring, .3 thick with strap eye. 1.7 wide hemp strap is sewn back onto itself thought the eye.
Aluminum ring with hemp strap, Chic Scott's. Solid aluminum ring, .3 thick with strap eye. 1.7 wide hemp strap is sewn back onto itself thought the eye.
(a) One piece of metal rod .7 cm dia. with screw one end and bent around other end for handle. (b) Aluminum, screw on one side only, hollowed other side, small finger handle and welded on keeper.
(a) One piece of metal rod .7 cm dia. with screw one end and bent around other end for handle. (b) Aluminum, screw on one side only, hollowed other side, small finger handle and welded on keeper.
TITON climbing nut, aluminum, Jon Jones'. Solid aluminum, central bar has base 7.5x5.8 with other end 5.5x4.2. 2round holes 1.3 dia. in each end centered both sides of central bar. Stamped one side of bar: "3" and "COLORADO NY", scratched on base "JON". Can be wedged in big crack for holding car…
TITON climbing nut, aluminum, Jon Jones'. Solid aluminum, central bar has base 7.5x5.8 with other end 5.5x4.2. 2round holes 1.3 dia. in each end centered both sides of central bar. Stamped one side of bar: "3" and "COLORADO NY", scratched on base "JON". Can be wedged in big crack for holding carabiner or rope.
A hand-forged, thin-blade piton for micro cracks called a ‘RURP’, an acronym for Realized Ultimate Reality Piton. The tapered blade is short and fine on the end; there are two holes on the wider, thicker end for rings. Engraved with “LONGWARE” and also “H G”.
A hand-forged, thin-blade piton for micro cracks called a ‘RURP’, an acronym for Realized Ultimate Reality Piton. The tapered blade is short and fine on the end; there are two holes on the wider, thicker end for rings. Engraved with “LONGWARE” and also “H G”.