A bright orange canvas belt that fastens with a natural coloured leather buckle and strap. The buckle is also leather covered. The belt has been used to hold a pin and medal collection, many of which are still attached. Original with the belt and on leather at either end are 'Overseas Mounted Ri…
A bright orange canvas belt that fastens with a natural coloured leather buckle and strap. The buckle is also leather covered. The belt has been used to hold a pin and medal collection, many of which are still attached. Original with the belt and on leather at either end are 'Overseas Mounted Rifles' pin (at buckle) and a crossed sword pin (at strap). Other pins include: one crown with red velvet cap (see #103.09.0059); one square with Laurel Wreath (see #103.09.0064); one 'Edmonton 49th Regiment' (see #103.09.0073); one maple leaf with crown over 'Vancouver 29 Canada'; one maple leaf with crown over 'Edmonton 49 overseas Batallon' and a beaver; one 'R.C.H.A.' (see #103.09.0070); two military truck with mounted turret gun over 'Borden's Armoured Battery'; one cannon over 'Que Fas Et Gloria Duncet'(see #103.09.0068); one horse over 'The Alberta 19 Mounted Rifles'; one 'AUSTRALIA'; one (broken tip) maple leaf with the Alberta Coat of Arms (see #103.09.0073).
A narrow black leather belt with a sterling silver buckle. The end of the belt folds back and snaps, forming a loop to hold the flat faced rectangular buckle that is marked with the initials 'R.B.M.' (Roger Moore). The buckle fastens with a sliding clasp which secures the tongue of the belt. The…
A narrow black leather belt with a sterling silver buckle. The end of the belt folds back and snaps, forming a loop to hold the flat faced rectangular buckle that is marked with the initials 'R.B.M.' (Roger Moore). The buckle fastens with a sliding clasp which secures the tongue of the belt. There are two narrow leather belt loops near the buckle.
A heavy, brown, leather belt with two 'tongue' straps, one of which is adjustable. The belt has a solid rectangular metal buckle bearing an embossed seal with the words “Gott mit uns” in a band around a crown. The buckle fastens with a hook.
A heavy, brown, leather belt with two 'tongue' straps, one of which is adjustable. The belt has a solid rectangular metal buckle bearing an embossed seal with the words “Gott mit uns” in a band around a crown. The buckle fastens with a hook.
Black hard-shelled leather, No.2 Folding Autographic Brownie Kodak camera. The front panel is released by slide a metal switch open, which also acts as the stand for the camera. When opened it reveals the lens, black leather bellows, and focal range on the right side. The lens locks into one of two…
Black hard-shelled leather, No.2 Folding Autographic Brownie Kodak camera. The front panel is released by slide a metal switch open, which also acts as the stand for the camera. When opened it reveals the lens, black leather bellows, and focal range on the right side. The lens locks into one of two spots on the focal range meter, with a small lever on the side of the lens. On top of the lens is the viewfinder which can be pushed to the side, for portrait or landscape. The lens is marked with a lot of text, shutter speed on top and aperture underneath (which includes the type of scenario for each aperture), such as “PORTRAIT 4” “NEAR VIEW” “AVERAGE VIEW 8” “DISTANT VIEW 16” “MARINE 32” “CLOUDS 64”. Along the edge of the lens text reads “KODAK BALL BEARING SHUTTER”. Underneath the lens reads, “NO. 2 FOLDING” “AUTOGRAPHIC” “BROWNIE”. To load the film, when the front panel is closed there is longer metal bar that can slid to the right that releases the main part of the camera, which can be taken out fully. Inside the camera is a few pieces of tape. Along the edges of the camera are different dates for patents. On the right side of the camera is a leather handle, which reads “No. 2 FOLDING AUTOGRAPHIC BROWNIE”, and a silver ‘key’ to reel the film. The back of the camera features a metal bar on a hinge that reads “USE AUTOGRAPHIC FILM” “NO. A-120” and a art-deco decorated stylus above, this reveals a part of the film to be autographed. There is also an orange circle to view the film inside.
Large folding camera with case; No. 3-A autographic model C; lens and bellows assembly rides on fold outbed; distance indicator right side of bed; tripod mounts on bed and side of body; film advance left side body; body covered with black leather; optical viewfinder right top corner of floating len…
Large folding camera with case; No. 3-A autographic model C; lens and bellows assembly rides on fold outbed; distance indicator right side of bed; tripod mounts on bed and side of body; film advance left side body; body covered with black leather; optical viewfinder right top corner of floating lens plate; shutter selection aperture and shutter release on lens; black leather case with broken strap;manufacturer's insignia on buckle; on the back of camera is flap and scribe for writing on film.
Folding Kodak camera; lens-bellows assembly rides out of body on bed; distance indicator near tip of bed; lens plate floats on 2 square steel columns; shutter selection dialabove lens; aperture selection dial below; viewfinder off to upper corner oflens plate; shutter release beside lens; back is …
Folding Kodak camera; lens-bellows assembly rides out of body on bed; distance indicator near tip of bed; lens plate floats on 2 square steel columns; shutter selection dialabove lens; aperture selection dial below; viewfinder off to upper corner oflens plate; shutter release beside lens; back is detachable release is twoclips top/bottom of body along with film advance.
Vest pocket Autographic with case; front plate pulls out of body; aperture selection lever internal lens,shutter speed selector; viewfinder lens; shutter release and viewfinder window behind front plate; leather bellows and support; open/lock button, film advance on one narrow side of body; back ha…
Vest pocket Autographic with case; front plate pulls out of body; aperture selection lever internal lens,shutter speed selector; viewfinder lens; shutter release and viewfinder window behind front plate; leather bellows and support; open/lock button, film advance on one narrow side of body; back has amber window and window for writing on film - Autographic; leather case with snap to hold closed.
Kodak No. 1-A Autographic Junior; Lens and bellows assembly rides on fold-out bed; box viewfinder centeredabove lens; aperture setting on front lens assembly; distance setting onfold-out bed; manufacturer's label on front assembly; metal film advance knobnear top; hidden button for opening camera;…
Kodak No. 1-A Autographic Junior; Lens and bellows assembly rides on fold-out bed; box viewfinder centeredabove lens; aperture setting on front lens assembly; distance setting onfold-out bed; manufacturer's label on front assembly; metal film advance knobnear top; hidden button for opening camera; detachable back; covered slotopens to allow writing directly on the film; original leather case with addedleather carrying strap; accessories not part of original camera: "Neoca"viewfinder in leather storage case, shutter release cable, 3 unexposed films.
Black hard-sided leather No.1 Kodak Series III folding camera. The front panel is released by pressing a small round metal button on the narrow bottom edge [the bottom of the camera is noted by the presence of a threaded hole where a tripod could be mounted] and has a small rectangular metal foot w…
Black hard-sided leather No.1 Kodak Series III folding camera. The front panel is released by pressing a small round metal button on the narrow bottom edge [the bottom of the camera is noted by the presence of a threaded hole where a tripod could be mounted] and has a small rectangular metal foot with “Kodak” engraved in decorative writing that keeps the camera propped up. The lens mechanism slides out on tracks with soft black leather bellows behind it and a viewfinder that can be used in portrait and landscape by gently push to the side. There is a art-deco decorated stylus housed next to the lens. There is lots of text along the lens to make adjustments, it is a “DIOMATIC No 0” lens. There are small plaques along the camera base which read “NO. 1 - KODAK SERIES III” “MADE IN CANADA BY CANADIAN KODAK CO., LIMITED TORONTO, ONT 28981”. The back panel of the camera pops off by pressing two metal clasps on both short sides and can house a roll of film. On the back embossed is text that reads “USE “KODAK” FILM NO A120” When the camera is open, on the top is a leather strap with a faded “Kodak” embossed on it.
A round pin with an extra curved section added at the bottom. The pin features a hiking boot at the centre along with “50.” The pin has a dark border with “SKYLINE HIKERS CANADIAN ROCKIES” and “1933-1983” in gold letters.
A round pin with an extra curved section added at the bottom. The pin features a hiking boot at the centre along with “50.” The pin has a dark border with “SKYLINE HIKERS CANADIAN ROCKIES” and “1933-1983” in gold letters.
Love BC Parks, "I Brake for Bighorns" (a) "Love BC Parks", white background with green and blue lettering. The"O" in love is a red heart, stylized BC flag right centre (b) "I Brake forBighorns" blue background, head of bighorn centered: "Waterton Lakes National Park" in smaller lettering along b…
Love BC Parks, "I Brake for Bighorns" (a) "Love BC Parks", white background with green and blue lettering. The"O" in love is a red heart, stylized BC flag right centre (b) "I Brake forBighorns" blue background, head of bighorn centered: "Waterton Lakes National Park" in smaller lettering along bottom edge.
A pair of studs with screw backs. Each stud has a design of a round wreath with a ram's head at the bottom of the wreath. The centre of the wreath contains a relief of a cooking pot over a campfire, with the pot hanging between two forked sticks.
A pair of studs with screw backs. Each stud has a design of a round wreath with a ram's head at the bottom of the wreath. The centre of the wreath contains a relief of a cooking pot over a campfire, with the pot hanging between two forked sticks.
A collection of seventeen brass military pins: (a-c) three gold-coloured metal pins (4.0 x 0.9cm) with cut-out letters reading "CANADA" joined with bars at the top and bottom. (d-e) two gold-coloured metal pins (5.2 x 1.0 cm) with cut-out letters reading “CANADA” forming an arch and joined at the t…
A collection of seventeen brass military pins: (a-c) three gold-coloured metal pins (4.0 x 0.9cm) with cut-out letters reading "CANADA" joined with bars at the top and bottom. (d-e) two gold-coloured metal pins (5.2 x 1.0 cm) with cut-out letters reading “CANADA” forming an arch and joined at the top and bottom with bars. (f) one gold-coloured metal pin (3.5 x 0.7 cm) with cut-out letters reading “CANADA” with the letters joined by a bar across the middle on the reverse side. (g-h) two copper-coloured metal pins (5.0 x 1.5 cm), each with a slightly curved solid bar face, with "CANADA" in relief. (i-l) four gold-coloured metal pins (5.0 x 2.0 cm), two sets of two, with each pin depicting an oak leaf and an acorn on a short twig. The letters "CH" are centred on the leaf ("CH" - Calgary Highlanders). (m) one gold-coloured metal pin (5.3 x 1.5 cm) with cut-out letters "R.C.H.A." (Royal Canadian Horse Artillery) joined at the top and bottom with a bar. (n) one gold-coloured metal pin (5.0 x 2.5cm) with"19th MR" (Mounted Rifles) in cut-out letters that are joined horizontally by bars at the top and bottom. The word "ALBERTA" is in an arch below the “19th MR” joined by curved bars at the top and bottom.(o) one gold-coloured metal pin (5.0 x 2.7 cm) with the cut-out letters “CMR" (Canadian Mounted Rifles) joined by a bar from the bottom of the "C" to the "M", and from the centre of the "M" to the "R". (p) one gold-coloured metal pin (1.7 x 2.8 cm) with a cut-out letter "C" sitting atop a bar which joins the numeral "10" below.(q) one gold-coloured metal pin (2.6 x 1.3 cm) with a cut-out numeral "12" joined by a bar at the bottom.
A collection of pin sets from Alberta and Winnipeg regiments: a) One brass pin (4.7 x 3.7 cm) cut out in the shape of the Alberta coat of arms (mountains in lower half and cross in upper) with four windmill sails behind and maple leaf on either side. A banner below the shield reads "Depot Battn, A…
A collection of pin sets from Alberta and Winnipeg regiments: a) One brass pin (4.7 x 3.7 cm) cut out in the shape of the Alberta coat of arms (mountains in lower half and cross in upper) with four windmill sails behind and maple leaf on either side. A banner below the shield reads "Depot Battn, Alberta Regiment". There is a crown at the top of the pin with "Canada" below it.b-f) Five pins (3.1 x 2.6 cm) with the same design as (a), but these pins are smaller and shinier. g) One brass pin (3.9 x 4.0 cm) in the shape of a maple leaf with the Alberta coat of arms in middle and crown atop the coat of arms. A banner below the coat of arms reads "Alberta Overseas Batt'y XXXI".h-j) Three pins (3.9 x 2.9) with the same design as (h), but smaller in size. k-l) Two pins (3.5 x 3.8) in the shape of a maple leaf with a coat-of-arms at the centre containing three wheat sheaves in bottom half, and a train engine in the top half surmounted by a buffalo. A banner underneath the coat of arms reads "City of Winnipeg XXVIII Batt'n".
A collection of six military pins in the shape of a maple leaf, with a crown in relief at the centre and a banner beneath spelling "CANADA": a-c) Three pins that are reddish in colour. d,e) Two pins that are a gold colour. f) One pin with a dark patina.
3.2 (a-c); 3.3 (d,e); 4.2 (f) x 3.0 (a-c); 3.3 (d,e); 4.0 (f) cm
Description
A collection of six military pins in the shape of a maple leaf, with a crown in relief at the centre and a banner beneath spelling "CANADA": a-c) Three pins that are reddish in colour. d,e) Two pins that are a gold colour. f) One pin with a dark patina.