Motronic “Pieps 2” avalanche beacon or transceiver. Orange plastic with metal parts. Labeled on side with “Pieps 2. Motronic. Made in Austria.” and instructions for use. Yellow fabric case with black cord marked “Pieps 2. Motronic. Canada.”
Motronic “Pieps 2” avalanche beacon or transceiver. Orange plastic with metal parts. Labeled on side with “Pieps 2. Motronic. Made in Austria.” and instructions for use. Yellow fabric case with black cord marked “Pieps 2. Motronic. Canada.”
Wooden handled ice axe. Handle inset into steel head, two extra pieces of steel extend 12.3 from head up shaft. Steel pick 15.6 long tapers from 0.5 wide to a point 0.2 wide. Stamped into pick: "Zermatt" and below to the right "Attenhofek, Zurich" . Steel collar and point at other end.
Wooden handled ice axe. Handle inset into steel head, two extra pieces of steel extend 12.3 from head up shaft. Steel pick 15.6 long tapers from 0.5 wide to a point 0.2 wide. Stamped into pick: "Zermatt" and below to the right "Attenhofek, Zurich" . Steel collar and point at other end.
Typical ice axe with cast iron head, point one end and blade on the other. Bottom has an iron point ca. 6.0 long, 13.0 in all with other as sleeve to attach to wooden shaft. Wooden shaft is weathered to a grey colour. The axe is heavier than usual. Stamped on side of head: "Hill & Son 4 Haym…
Typical ice axe with cast iron head, point one end and blade on the other. Bottom has an iron point ca. 6.0 long, 13.0 in all with other as sleeve to attach to wooden shaft. Wooden shaft is weathered to a grey colour. The axe is heavier than usual. Stamped on side of head: "Hill & Son 4 Haymarket London".
Typical ice axe, extra long plain pick and dished spade. Engraved on side of pick "Cassin". Point is 10.0 long with 4.3 long solid point. Wooden handle is broken below head.
Typical ice axe, extra long plain pick and dished spade. Engraved on side of pick "Cassin". Point is 10.0 long with 4.3 long solid point. Wooden handle is broken below head.
Typical ice axe, pointed pick, curved adze and square pointed spike. Pick head 25.3 long, adze 5.5 wide. Wooden shaft inset into head, two 13.3 x 0.7 strips of the steel head extend up and nailed to shaft. 5.3 wide steel hand on end. Spike embedded in centre of end. Stamped on pick: "Tramcois …
Typical ice axe, pointed pick, curved adze and square pointed spike. Pick head 25.3 long, adze 5.5 wide. Wooden shaft inset into head, two 13.3 x 0.7 strips of the steel head extend up and nailed to shaft. 5.3 wide steel hand on end. Spike embedded in centre of end. Stamped on pick: "Tramcois Simon & FIS Chamony Mont-Blanc". Other side of pick: "Modele G.H.M. 3013". Thin leather thong is tied and wrapped to shaft.
Ice axe with two piece leather cover with buckle. Axe head has pointed tip and flat blade. On side of tip is stamped: "Fritz Joerg Zweilutdchinen Berner Oberland".
Ice axe with two piece leather cover with buckle. Axe head has pointed tip and flat blade. On side of tip is stamped: "Fritz Joerg Zweilutdchinen Berner Oberland".
Typical ice axe, stout wooden handle with axe one end and pick on the other. Manufacturer's logo stamped on ice axe head and no. 1048. Other side is stamped "F.H. Allen"
Typical ice axe, stout wooden handle with axe one end and pick on the other. Manufacturer's logo stamped on ice axe head and no. 1048. Other side is stamped "F.H. Allen"
Typical ice axe, wooden handle with small head. Stamped on side of pick end "Johann Hofer Fulpiaes" and "Reg. Schutz marke". Steel collar and point 13.0 long other end. Leather strap is attached to a metal ring which floats on the wooden shaft. Leather keeper is nailed on to shaft near bottom…
Typical ice axe, wooden handle with small head. Stamped on side of pick end "Johann Hofer Fulpiaes" and "Reg. Schutz marke". Steel collar and point 13.0 long other end. Leather strap is attached to a metal ring which floats on the wooden shaft. Leather keeper is nailed on to shaft near bottom. Inscribed on shaft near top is the letter "E".
Long wooden handled ice axe with metal axe head and tip. Engraved into one side of handle near head: "J.L. McCulloch" and on other side: "J.L.McC 1P13"
Long wooden handled ice axe with metal axe head and tip. Engraved into one side of handle near head: "J.L. McCulloch" and on other side: "J.L.McC 1P13"
