A dark glass beer bottle with white paper label that is printed with “BUGABOO SPIRE 1916-2916” above a print of a man scrambling on rocks. “HOBNAILS AND HEMP ROPE” is printed below the image. Handwritten in pen below is “Bugaboo Special Bitter brewed Oct 23 bottled Nov 7 by Ivan Petrov & Mike Bowle…
A dark glass beer bottle with white paper label that is printed with “BUGABOO SPIRE 1916-2916” above a print of a man scrambling on rocks. “HOBNAILS AND HEMP ROPE” is printed below the image. Handwritten in pen below is “Bugaboo Special Bitter brewed Oct 23 bottled Nov 7 by Ivan Petrov & Mike Bowler #5 of 100.”
A grey fibre rope, coiled, wrapped round, and tied with a butterfly coil knot. The rope is kept from fraying and coming apart by secured ends with white adhesive tape on the tips, and black duct tape above that.
A grey fibre rope, coiled, wrapped round, and tied with a butterfly coil knot. The rope is kept from fraying and coming apart by secured ends with white adhesive tape on the tips, and black duct tape above that.
A grosgrain ribbon in red and white (colours of the Austrian flag) (a) is folded into the shape of a triangle. A metal pin set with a wide pin bar is inserted into the fold and (b) a grosgrain ribbon in red and white (colours of the Austrian flag) is folded into the shape of a small bow and sewn on…
A grosgrain ribbon in red and white (colours of the Austrian flag) (a) is folded into the shape of a triangle. A metal pin set with a wide pin bar is inserted into the fold and (b) a grosgrain ribbon in red and white (colours of the Austrian flag) is folded into the shape of a small bow and sewn onto a metal back of a tie-tack style (spike and clutch closure attachment) lapel pin. (a) A grosgrain ribbon in red and white (colours of the Austrian flag) is folded into the shape of a triangle. A metal pin set with a wide pin bar is inserted into the fold. The hinged pin comes through the fabric at the back displaying a barrel-type catch for closing. A silver-coloured metal hook is sewn onto the top part; this hooks through a silver-coloured rivet in the bottom of the folded triangular-shaped ribbon and attaches to a metal ring, which in turn is attached to a ring soldered to the top part of the back of a heraldic gold-coloured stylized eagle, wings outstretched, embossed with ten divisional/regimental shields, one under the head and nine on the tips of the its feathers. There is a second ring soldered onto the bottom back of the eagle, suspended from which is a gold-coloured Maltese cross with webbed design surface and a flat-surfaced Christian cross in the centre.(b) A grosgrain ribbon in red and white (colours of the Austrian flag) is folded into the shape of a small bow and sewn onto a metal back of a tie-tack style (spike and clutch closure attachment) lapel pin. The size is (2.5 wide x 1 width x 1cm deep).The medal and lapel pin are stored in a red-paper covered metal hinged box (black bottom) lined with white satin on the inside cover and white faux velvet on the container part with depressions made for the medal and the lapel pin. Gold script with the jeweller’s particulars “Friedrich Orth Wien seit 1840” is embossed on the inside cover. A heraldic eagle is embossed in gold on the top of the box lid.
Six bottles of beer (empty) with case, signed poster and card. Typical beer bottle with screw off cap. Label affixed to one side has a red border with "Brewed Naturally in the Canadian Rockies" on top and "6% alc./vol. 341 mL" on bottom edge. The scene has mountains in the background with a clim…
Six bottles of beer (empty) with case, signed poster and card. Typical beer bottle with screw off cap. Label affixed to one side has a red border with "Brewed Naturally in the Canadian Rockies" on top and "6% alc./vol. 341 mL" on bottom edge. The scene has mountains in the background with a climber, Bruno Engler, highlighted in the centre, with "Bruno's Mountain Bock " in red. Also on the label is "The Bow Valley Brewing Company Canmore Alberta Strong Beer Biere Forte". The paper case is light brown in colour with the same picture as the label on four sides with stories about Bruno and the beer on the top, other promotion on sides. Poster 91.5x56.0 has a black border with white lettering. "Canmore's Legendary Brew" is in large black letters at top of poster, yellowish background is a mountain scene with a black and white image of the beer bottle centered. Signed "Bruno Engler" on left edge. Small card promoting the book "A Mountain Life Stories and photographs of Bruno Engler edited by R. W. Sandford".
A oblong plastic case with an opening to insert the name tag. The plastic case has an extension on the centre top where a metal swivel rivet is attached to a spring snap for clipping onto clothing. The words “SVAR Mod. 41 006” is imprinted under the metal rivet. The two-piece metal snap is connecte…
A oblong plastic case with an opening to insert the name tag. The plastic case has an extension on the centre top where a metal swivel rivet is attached to a spring snap for clipping onto clothing. The words “SVAR Mod. 41 006” is imprinted under the metal rivet. The two-piece metal snap is connected by a rivetted spring. The front piece has the letter “E” inside a diamond shape and the letters “I,M,L” inside individual boxes above the rivet. The back piece has four lines etched on the top and “MADE” on one side and “ITALY” on the other. On the inserted paper name tag is the UIAGM logo; a stylized mountain on the top-third of a segmented globe on a blue background, Above the circle are the letters “UIAGM” and below “IVBV”.The outer ring of the circular logo has these words printed on it “GUIDE DE MONTAGNES GUIDA BERGFUHRER”, in the lhc. The word “Kanada” is centred and below the name “Hans Gmoser”. The lettering and logo are very dark blue on a white paper background and a dark blue box surrounding the information.
Circular metal and enamel pin with the inner circle containing a stylized mountain on the top-third of a segmented globe on a blue enamel background, Above the circle are the letters “UIAGM” and below “IVBV”. The outer ring of the circular pin has these words printed on it “GUIDE DE MONTAGNES GUIDA…
Circular metal and enamel pin with the inner circle containing a stylized mountain on the top-third of a segmented globe on a blue enamel background, Above the circle are the letters “UIAGM” and below “IVBV”. The outer ring of the circular pin has these words printed on it “GUIDE DE MONTAGNES GUIDA BERGFUHRER”. The front of the pin is coated with clear plastic, presumably for protection from the elements as it must be worn when guiding. The back of the pin has two horizontal hinged pins on two separate pin sets with a swivel-locking safety catch for each of the pins. In between the pin sets is a rectangular box with the letter “K” on top and then “KOFEL-BZ”.
A wooden plaque with the Alpine Club of Canada’s crest and a relief of the Chateau Lake Louise. The plate on the plaque reads “THANK YOU FOR YOUR GENEROUS SUPPORT OF THE 1991 MOUNTAIN GUIDES’ BALL.”
A wooden plaque with the Alpine Club of Canada’s crest and a relief of the Chateau Lake Louise. The plate on the plaque reads “THANK YOU FOR YOUR GENEROUS SUPPORT OF THE 1991 MOUNTAIN GUIDES’ BALL.”
Foreground from near top left to near bottom right is a snow covered mountain slope, 3 climbers with rope are on the slope, background is snow covered mountains protruding through cloud cover, top quarter is clear blue sky
Foreground from near top left to near bottom right is a snow covered mountain slope, 3 climbers with rope are on the slope, background is snow covered mountains protruding through cloud cover, top quarter is clear blue sky
One medal of order (a) (Order of Canada) and two lapel pins (b,c) (Order of Canada):(a) the medal of order is a six-pointed white enamel stylized snowflake design edged in silver. There is a silver maple leaf (signifying that it stands for Member of the Order of Canada) soldered onto the centre of …
One medal of order (a) (Order of Canada) and two lapel pins (b,c) (Order of Canada):(a) the medal of order is a six-pointed white enamel stylized snowflake design edged in silver. There is a silver maple leaf (signifying that it stands for Member of the Order of Canada) soldered onto the centre of the snowflake. The maple leaf is surrounded by a red enamel ring bearing the motto of the order “DESIDERANTES MELIOREM PATRIAM” (meaning “They desire a better country”) in silver lettering. The circle is topped by a crown (white, red, and turquoise) enamel simulating jewels edged in silver) of St. Edward, symbolizing that the order is headed by a sovereign. At the top of the snowflake badge there is a silver metal suspension ring. A grosgrain ribbon, white, bordered in red stripes similar to the Canadian flag, is passed through the ring and attached to a silver pin bar. The reverse side is plain silver except for the word “CANADA” and “1181” underneath, printed on the centre disc. Directly below on one of the snowflake points are some numbers and underneath that the word “RIDEAU”. On the top reverse side of the pin bar there is a horizontal hinged pin with a swivel-locking safety catch, underneath which “RIDEAU” is printed. The pin bar has an opening for the ribbon to pass through and two holes at the bottom where the ribbon is sewn to the pin bar with red thread.(a,b) The two small lapel pins (1cm high,1cm wide) are white enamel stylized snowflakes edged in silver with a silver maple leaf in the centre. On the back there is one small spike and one larger spike soldered onto the medal with a tie-tack style (spike and clutch closure attachment) pin closure. The medal and lapel pins are stored in a hinged black leatherette case lined in blue satin; the medal (a) rests in a depression, the lapel pins have no depressions for storage, the cover is lined in white satin, the letters “C.M.” in gold on outside lid.
Blue, Mount Everest, red and navy design, ordinary blue cotton short sleeve t-shirt, red maple leaf 20.0 x 27.0 with climber holding up and ice axe superimposed on left side of maple leaf, on right side lettering in navy,1.0 tall reading :"Canadian Mt. Everest Expedition 1982".
Blue, Mount Everest, red and navy design, ordinary blue cotton short sleeve t-shirt, red maple leaf 20.0 x 27.0 with climber holding up and ice axe superimposed on left side of maple leaf, on right side lettering in navy,1.0 tall reading :"Canadian Mt. Everest Expedition 1982".
A well-made green canvas rucksack with leather straps and metal buckles. It has a drawstring closure with metal grommets through which a woven cord is passed through and tied. The flap is a separate piece of canvas sewn onto the sack which is darted and rounded to fit neatly over the top of the pac…
A well-made green canvas rucksack with leather straps and metal buckles. It has a drawstring closure with metal grommets through which a woven cord is passed through and tied. The flap is a separate piece of canvas sewn onto the sack which is darted and rounded to fit neatly over the top of the pack. A leather strap is attached to the flap by two rivets stamped with the words “WIDE STEEL SHANK” (Note: all rivets mentioned have this lettering). The main sack/bag has a white label sewn onto the top bearing the trademark “A & F” in red thread and “Abercrombie & Fitch Co.” in blue, underneath this “NEW YORK”. Underneath the label the word “MILLS” is hand printed in black indelible ink. There are two flapped pockets attached to the front of the bag; each flap has a leather strap attached to it by one rivet. The pocket has a metal buckle attached to the flap by piece of folded leather attached by two rivets. Between the pockets is another metal buckle attached by piece of folded leather and two rivets. On the back of the bag there is a piece of leather sewn onto the top and two straps for arms to go through; each strap is attached by two rivets; 5cm from the bottom and 3.5cm from each side there are two pieces of green corded material 6.5x2w cm folded over and sewn with green thread in an X-shaped pattern. On the bottom sides of the pack there are two folded pieces of leather, through which a metal ring is inserted, attached by two rivets. A metal push clip that hooks through the ring has a folded leather piece held together by one rivet. Through these two folds the buckle and the clip are attached.
A pair of brown leather, over the ankle, square-toed hiking boots with light brown cotton laces. Each boot has six lace hooks (lacing lugs) and one grommetted eyelet on each side. The sole is separate and stitiched to the boot.
A pair of brown leather, over the ankle, square-toed hiking boots with light brown cotton laces. Each boot has six lace hooks (lacing lugs) and one grommetted eyelet on each side. The sole is separate and stitiched to the boot.
In the foreground two mountain climbers are making their way through a series of blue-green ice blocks. To the viewer’s immediate right: the back of a climber, the thigh of his right leg, his bent left leg (in the act of climbing up), his left arm bent at the elbow with his hand resting on his brow…
In the foreground two mountain climbers are making their way through a series of blue-green ice blocks. To the viewer’s immediate right: the back of a climber, the thigh of his right leg, his bent left leg (in the act of climbing up), his left arm bent at the elbow with his hand resting on his brown ice axe. He is wearing a red down-filled parka with the hood up. The jacket has two badges on the upper left arm; the lower, larger badge is black and white and the upper badge is the Canadian flag in red and white. He is also wearing black mitts, brown ski pants, and on the partial view of his left leg and foot, red gaiters, brown boots with red laces and crampons. Ahead of him to the viewer’s left, another man is in the act of climbing, his body is turning to the left and he appears to be looking off in the distance. He is wearing eye goggles, a blue parka with grey fur around the collar and bottom, a red head cover, grey mitts and red gaiters. His right hand is resting on his ice axe. He appears to be a guide (Sherpa) because of his dark skin. To his right, and directly in front of the first climber and the ice blocks, is a towering serac of blue-green ice. Three of its jagged peaks at the top extend beyond our view. The snow on the viewer’s left is blue and white and there are exposed brown and green, snow-covered rocks to the viewer’s left. The sky above is a very deep blue.
A rusted red can that was used as a summit register container for Mt. Louis. The dented, rust-covered top is inside. Two-thirds of the rim where the lid fit on is cut away, probably by a can opener or a knife. There is a fragment of rust-coloured paper attached to the seam and extending to the rig…
A rusted red can that was used as a summit register container for Mt. Louis. The dented, rust-covered top is inside. Two-thirds of the rim where the lid fit on is cut away, probably by a can opener or a knife. There is a fragment of rust-coloured paper attached to the seam and extending to the right. The outside is painted red with about a third of paint worn away by the elements. The can has a big dent to the left of the seam.
A black and white photographic positive, a figure of a man is central in the picture, only his one boot is clearly defined, he is chopping through a cornice of snow, the mountain is from bottom left to upper right, most of it snow, flying snow backlit from the sun dominates the centre of the picture
A black and white photographic positive, a figure of a man is central in the picture, only his one boot is clearly defined, he is chopping through a cornice of snow, the mountain is from bottom left to upper right, most of it snow, flying snow backlit from the sun dominates the centre of the picture
A circular Alpine Club Mountain Guide pin with a forest-green, enamel maple leaf centred on the pin face, edged in silver and with the letters “ACMG” in silver. The outer rim of the pin is a coiled climbing rope encircling it three times; at the bottom is a red enamel curved bar edged in silver wit…
A circular Alpine Club Mountain Guide pin with a forest-green, enamel maple leaf centred on the pin face, edged in silver and with the letters “ACMG” in silver. The outer rim of the pin is a coiled climbing rope encircling it three times; at the bottom is a red enamel curved bar edged in silver with “MOUNTAIN” on top and “GUIDE” below in silver. The stylized cut-out maple leaf has a flat one-dimensional pair of skis crossed with an ice axe underneath. Both extend onto the coiled rope rim. Stamped on the back of the pin at the centre and under the pin set is the number “27” and something indecipherable beneath. There is one horizontal long-hinged pin soldered on the back that is rivetted at one end and fastens at the other end (bottom) with a swivel-locking safety clasp.