Ice axe with long wooden handle and metal head and tip. Rubber cover on tip. Metal ring slides up and down handle with fabric loop. Manufacturer’s stamp on head “PRIMA” and “MADE IN SWITZERLAND” on other side.
Ice axe with long wooden handle and metal head and tip. Rubber cover on tip. Metal ring slides up and down handle with fabric loop. Manufacturer’s stamp on head “PRIMA” and “MADE IN SWITZERLAND” on other side.
Wooden ice axe with metal head and tip. Head stamped: “PRIMA. 24222. C 3/2. A. PUPFAUF. WERNZEUGSCHMIED. E. IS. EDCLW [?]SCHWER”. Leather cover for head of axe stamped: “ARTICLE OF VOYAGER HANS MULLER. INTERLAKEN.”
Wooden ice axe with metal head and tip. Head stamped: “PRIMA. 24222. C 3/2. A. PUPFAUF. WERNZEUGSCHMIED. E. IS. EDCLW [?]SCHWER”. Leather cover for head of axe stamped: “ARTICLE OF VOYAGER HANS MULLER. INTERLAKEN.”
Six ice axes with wooden handles, metal heads and tips. (a) has a leather head cover and tip cover. Cover marked “RICHARD COOGAN,” head marked: “FAYETTE R. PLUMB. PHILADELPHIA. SOLID CAST STEEL.” (b) has a leather head cover and tip cover. Head marked “FAYETTE R. PLUMB. PHILADELPHIA. SOLID CAST STE…
Six ice axes with wooden handles, metal heads and tips. (a) has a leather head cover and tip cover. Cover marked “RICHARD COOGAN,” head marked: “FAYETTE R. PLUMB. PHILADELPHIA. SOLID CAST STEEL.” (b) has a leather head cover and tip cover. Head marked “FAYETTE R. PLUMB. PHILADELPHIA. SOLID CAST STEEL.” (c) has leather head cover and tip cover. Head is stamped: “C.P.R.” & “F. JORG. ZWEILUTSCHINEN. BERNEROBERLAND” and an “X” is carved into the wooden handle just below the head. (d) has “GEORGE VAUX” engraved on head, also manufacturer’s stamp with crown and text obscured by rust. “INTERLAKEN” is the only legible word on the manufacturer’s stamp. (e) has a leather head cover and is made by “FAYETTE R. PLUMB. PHILADELPHIA. (f) has a leather tip cover, is stamped: “FAYETTE R. PLUMB. PHILADELPHIA” and the initials “MV” are carved into the wooden handle near the head.
Ice axe, steel head reveted to wooden shaft, with aluminum glide ring and nylon wrist strap. Stamped on head: “Schaefer Sports Lausanne” on one side. and “Marke Mischabel” with outline of mountains above on reverse. Well used.
Ice axe, steel head reveted to wooden shaft, with aluminum glide ring and nylon wrist strap. Stamped on head: “Schaefer Sports Lausanne” on one side. and “Marke Mischabel” with outline of mountains above on reverse. Well used.
Ice axe, steel head riveted to wooden shaft, with aluminum glide ring and canvas wrist strap. Stamped on head: “Fritsch & Co. Zurich” and “Made in Switzerland”. The number “55” written on reverse of glide ring. Marred and scratched from much use.
Ice axe, steel head riveted to wooden shaft, with aluminum glide ring and canvas wrist strap. Stamped on head: “Fritsch & Co. Zurich” and “Made in Switzerland”. The number “55” written on reverse of glide ring. Marred and scratched from much use.
Typical ice axe, well-used, with head (blade) and two long metal strips extending 14 cm. from head (blade) riveted to the wooden shaft, two rivets to each side. “WERK... PMES” encircled and “ORIGINAL ASCHENBRENNER GES.GESCH.” stamped on the head. There is an a “M” scored in the wooden shaft 4 cm. f…
Typical ice axe, well-used, with head (blade) and two long metal strips extending 14 cm. from head (blade) riveted to the wooden shaft, two rivets to each side. “WERK... PMES” encircled and “ORIGINAL ASCHENBRENNER GES.GESCH.” stamped on the head. There is an a “M” scored in the wooden shaft 4 cm. from the metal head. A screw is embedded in the wooden shaft 25.5cm from the pointed metal tip.
Typical ice axe, well used, pointed pick, curved adze and pointed slightly curved spike with serated (4) blade and two long metal strips extending 11 cm. from head (blade) riveted to the wooden shaft, two rivets to each side. There is a round hole in the bottom of the axe head where it fits onto th…
Typical ice axe, well used, pointed pick, curved adze and pointed slightly curved spike with serated (4) blade and two long metal strips extending 11 cm. from head (blade) riveted to the wooden shaft, two rivets to each side. There is a round hole in the bottom of the axe head where it fits onto the wooden shaft. Neatly carved into the wooden shaft 1.50 cm from the head are the words “MT. COOK” and underneath 12349 and at 2.5 cm. there is an “EM” scored in the wooden shaft. Engraved on pick blade: "J. Charlet a Chamonix” and to the left of this is an ibex logo. On the metal tube that extends from the wooden shaft there is a copper-coloured vertical line (might be a solder line).
Light wood handle ice axe with metal axe head and tip. Engraved text on head: “Simond Special E Claudius Simond Charmonix Mont Blanc. Made in France” on head. Image of goat in wreath engraved. Metal ring surrounding handle. Fabric on metal ring white and red stripes. Nail 25 cm up from bottom tip.
Light wood handle ice axe with metal axe head and tip. Engraved text on head: “Simond Special E Claudius Simond Charmonix Mont Blanc. Made in France” on head. Image of goat in wreath engraved. Metal ring surrounding handle. Fabric on metal ring white and red stripes. Nail 25 cm up from bottom tip.
Wood handle ice axe with metal axe head and tip. Engraved: “Grivel Courmayeur” with long floral/key design on head. Opposite side engraved with “Made in Italy.” Metal circle around handle with nylon rope. Nail in handle 31 cm from bottom tip.
Wood handle ice axe with metal axe head and tip. Engraved: “Grivel Courmayeur” with long floral/key design on head. Opposite side engraved with “Made in Italy.” Metal circle around handle with nylon rope. Nail in handle 31 cm from bottom tip.
Metal ice axe with blue plastic on metal handle. Blue plastic decorated with vertical engraved lines. Black duct tape wound around centre of handle. Engraved: “Camp Interalp” on head. Metal ring around handle with nylon rope around. Snap on fabric attaches secondary piece in stripes of red and gree…
Metal ice axe with blue plastic on metal handle. Blue plastic decorated with vertical engraved lines. Black duct tape wound around centre of handle. Engraved: “Camp Interalp” on head. Metal ring around handle with nylon rope around. Snap on fabric attaches secondary piece in stripes of red and green on yellow background.
Wood handle ice axe with metal axe head and tip. Tan leather cover with small silver buckle across head. “Stubai MOD WALLNER Made in Austria” stamped on head. Hole at centre of metal head. Nail 25.25 cm up from tip of handle. Sliding metal ring on handle with red fabric attached.
Wood handle ice axe with metal axe head and tip. Tan leather cover with small silver buckle across head. “Stubai MOD WALLNER Made in Austria” stamped on head. Hole at centre of metal head. Nail 25.25 cm up from tip of handle. Sliding metal ring on handle with red fabric attached.
Steel handle ice axe with metal axe head and tip. Axe is painted in black and yellow. Along the handle “Charlet” is written in white” and “moser” is written in yellow. The paint at the bottom is chipping to expose the metal. 3 holes in axe head. In white text on top of head “70 cm/27 1/2 in VANO[?]…
Steel handle ice axe with metal axe head and tip. Axe is painted in black and yellow. Along the handle “Charlet” is written in white” and “moser” is written in yellow. The paint at the bottom is chipping to expose the metal. 3 holes in axe head. In white text on top of head “70 cm/27 1/2 in VANO[?]E”.
Metal ice axe with metal axe head and tip. Red text printed on handle with the insignia of two ice axes crossed flanking the text on either side. Text reads “Grivel Mont Blanc”. “Grivel Mont Blanc” stamped on top of axe head. Side of axe head stamped “Made in Italy.” From the axe hangs a long orang…
Metal ice axe with metal axe head and tip. Red text printed on handle with the insignia of two ice axes crossed flanking the text on either side. Text reads “Grivel Mont Blanc”. “Grivel Mont Blanc” stamped on top of axe head. Side of axe head stamped “Made in Italy.” From the axe hangs a long orange cord with blue detail.
Wooden handled ice axe. Handle inset into steel head, two extra pieces of steel extend 12.3 from head up shaft. Steel pick 15.6 long tapers from 0.5 wide to a point 0.2 wide. Stamped into pick: "Zermatt" and below to the right "Attenhofek, Zurich" . Steel collar and point at other end.
Wooden handled ice axe. Handle inset into steel head, two extra pieces of steel extend 12.3 from head up shaft. Steel pick 15.6 long tapers from 0.5 wide to a point 0.2 wide. Stamped into pick: "Zermatt" and below to the right "Attenhofek, Zurich" . Steel collar and point at other end.
Typical ice axe with cast iron head, point one end and blade on the other. Bottom has an iron point ca. 6.0 long, 13.0 in all with other as sleeve to attach to wooden shaft. Wooden shaft is weathered to a grey colour. The axe is heavier than usual. Stamped on side of head: "Hill & Son 4 Haym…
Typical ice axe with cast iron head, point one end and blade on the other. Bottom has an iron point ca. 6.0 long, 13.0 in all with other as sleeve to attach to wooden shaft. Wooden shaft is weathered to a grey colour. The axe is heavier than usual. Stamped on side of head: "Hill & Son 4 Haymarket London".
Typical ice axe, extra long plain pick and dished spade. Engraved on side of pick "Cassin". Point is 10.0 long with 4.3 long solid point. Wooden handle is broken below head.
Typical ice axe, extra long plain pick and dished spade. Engraved on side of pick "Cassin". Point is 10.0 long with 4.3 long solid point. Wooden handle is broken below head.
Typical ice axe, pointed pick, curved adze and square pointed spike. Pick head 25.3 long, adze 5.5 wide. Wooden shaft inset into head, two 13.3 x 0.7 strips of the steel head extend up and nailed to shaft. 5.3 wide steel hand on end. Spike embedded in centre of end. Stamped on pick: "Tramcois …
Typical ice axe, pointed pick, curved adze and square pointed spike. Pick head 25.3 long, adze 5.5 wide. Wooden shaft inset into head, two 13.3 x 0.7 strips of the steel head extend up and nailed to shaft. 5.3 wide steel hand on end. Spike embedded in centre of end. Stamped on pick: "Tramcois Simon & FIS Chamony Mont-Blanc". Other side of pick: "Modele G.H.M. 3013". Thin leather thong is tied and wrapped to shaft.
Ice axe with two piece leather cover with buckle. Axe head has pointed tip and flat blade. On side of tip is stamped: "Fritz Joerg Zweilutdchinen Berner Oberland".
Ice axe with two piece leather cover with buckle. Axe head has pointed tip and flat blade. On side of tip is stamped: "Fritz Joerg Zweilutdchinen Berner Oberland".