A long black academic gown with long wide pointed sleeves gathered at the shoulders. The gown opens down the length of the gown front, with a wide panel on either side, and snaps to fasten at the top creating a V-neck. The back of the gown is gathered between the shoulders with a square 'collar' …
A long black academic gown with long wide pointed sleeves gathered at the shoulders. The gown opens down the length of the gown front, with a wide panel on either side, and snaps to fasten at the top creating a V-neck. The back of the gown is gathered between the shoulders with a square 'collar' at the yoke and a line of twisted cording down centre that buttons at the bottom of the yoke. The monogram “P.A.M.” is sewn on a label at the neck. There is also a manufacturer’s label at the neck.
A gold-coloured academic gown gathered at the yoke and sleeves. The gown has a wide curving neck and front opening that are banded with black satin. There are three black satin bands along edges of the wide, long, pointed sleeves. The gown fastens at the front of the neck with hooks and a narro…
A gold-coloured academic gown gathered at the yoke and sleeves. The gown has a wide curving neck and front opening that are banded with black satin. There are three black satin bands along edges of the wide, long, pointed sleeves. The gown fastens at the front of the neck with hooks and a narrow ribbon tie.
A black academic hood that has a sleeve shape at the end. The deep hood is lined with orange silk and black silk in wide bands. The hood is edged in light grey velvet which forms a strap to pass over the shoulders and rest on the chest.
A black academic hood that has a sleeve shape at the end. The deep hood is lined with orange silk and black silk in wide bands. The hood is edged in light grey velvet which forms a strap to pass over the shoulders and rest on the chest.
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails…
Air meter enclosed in circular shallow brass case covered with glass, and standing on three brass legs (3.5 cm) attached to a solid brass disk stand of the same size. Brass ring attached perpendicular to side of the meter case by two thin metal arms, contains wind vane with eight small square sails attached to centre by small metal arms. Face dial measured around perimeter with numbers from 0-90 has small circular dial at top with numbers from 0-9 and the letters "HDS" just above central pivot of small thin needle. Dial reads "Air meter to 1000 feet/No 508". Bottom of solid brass base has screw hole at centre to hold screw mount which is brass finger screw with black painted brass tube attached to top. Lever on side of meter halts needle. Box, plain square wooden box with brass hinges for lid is fitted with small blocks of wood to hold air meter securely in place. Mounting screw slips over arm of piece of wood fastened to lid. Paper label inside lid reads, "Correction for Air Meter No. 508/. Add 30 per minute to the observed reading of the Air Meter. Note. Each instrument is now regulated so as to reduce the correction to a constant quantity per minute, which must be added as in the example given.". Small brass latch hook closes lid.
Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
Olive green felt alpine hat with hatband made of three strands of gold cord. Broken black feather tucked into hatband. Two labels inside hat: “Made in Austria” & “ORIGINAL Tscher HUT.”
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
Large metal amplifying horn from phonograph. Flared shape in eleven sections. Blue paint worn off in many areas. Small red label reads: “‘Rex’ TRADEMARK STANDARD AMPLIFYING HORN. THE BEST FOR TONE. R.S.W. & S.”
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a s…
A pair of three-legged andirons. Each andiron has a large, spool like, brass ornament topped with a large ball. This decoration sits on two curved solid brass legs. The third leg is attached behind the first two by a a curved, brass covered, horizontal iron bar. This third leg is topped by a smaller brass knob. The bar attching the third leg continues straight back and bends at a right angle down to form another leg and forms the section that supports logs. The knobs unscrew from the legs and each andiron breaks down.
Two aneroid barometer-altimeters (a & b) labeled: “Keuffel & Esser Co. N.Y. MADE IN ENGLAND. Improved Surveying Aneroid Compensated” Black oxidized finish on the case. Altitude graduation up to 12,000 feet. Leather carrying cases contain comparative pressure test sheet dated 1903 and issued by Keuf…
Two aneroid barometer-altimeters (a & b) labeled: “Keuffel & Esser Co. N.Y. MADE IN ENGLAND. Improved Surveying Aneroid Compensated” Black oxidized finish on the case. Altitude graduation up to 12,000 feet. Leather carrying cases contain comparative pressure test sheet dated 1903 and issued by Keuffel & Esser.
A stylized dragon carved from white onyx. The dragon’s body is flat and slightly arched over a round disk base with a dragon's head at one end looking back over the body. There is an ornate raised relief carving on the body. The base is marked with (Chinese?) characters inside a square.
A stylized dragon carved from white onyx. The dragon’s body is flat and slightly arched over a round disk base with a dragon's head at one end looking back over the body. There is an ornate raised relief carving on the body. The base is marked with (Chinese?) characters inside a square.
Bamboo musical instrument made of two hollow bamboo tubes suspended on split bamboo frame of three thin upright sticks supported in holes cut in hollow bamboo tube at bottom. Two flat pieces of bamboo are secured crosswise into the split uprights and each holds one of the bamboo tubes which are hun…
Bamboo musical instrument made of two hollow bamboo tubes suspended on split bamboo frame of three thin upright sticks supported in holes cut in hollow bamboo tube at bottom. Two flat pieces of bamboo are secured crosswise into the split uprights and each holds one of the bamboo tubes which are hung on them by a semicircular hole which fits into a notch on the crosspiece, half of the upper part of these tubes have been cut away lengthwise and at their bottom two small legs have been carved which fit into wells cut in the bamboo tube at the bottom. When the instrument is held by one of the uprights and shaken, the hollow bamboo clappers strike the sides of this well and make a musical sound.
A white filigree lace antimacassar that has a straight edge across the top with sharp corners and is rounded on the bottom corners. A solid border is scalloped along the rounded edges. The border encloses a wide band of openwork lace containing a diamond shape pattern of thick dots around a solid…
A white filigree lace antimacassar that has a straight edge across the top with sharp corners and is rounded on the bottom corners. A solid border is scalloped along the rounded edges. The border encloses a wide band of openwork lace containing a diamond shape pattern of thick dots around a solid rectangular centre with openwork bar across a repeating diamond pattern.
8 black carbon rods in box; (a - g); ca 30.6 long, 1.0 diameter; (h) ca 30.6 long, 1.3 diameter;printed on rod: "National trade mark Photographic white flame cored" made inU.S.A. 390" 671; (i) corrugated cardboard box 31.6 x 10.5 x 6.5; withmanufacturer's label "Macbeth Arc Lamp Co."
8 black carbon rods in box; (a - g); ca 30.6 long, 1.0 diameter; (h) ca 30.6 long, 1.3 diameter;printed on rod: "National trade mark Photographic white flame cored" made inU.S.A. 390" 671; (i) corrugated cardboard box 31.6 x 10.5 x 6.5; withmanufacturer's label "Macbeth Arc Lamp Co."
Three handmade arrows carved from wooden twigs, each with three split and trimmed shaft feathers bound to a notched end. All three arrows have sharpened tips and are painted with coloured bands: a) An arrow with red, green and yellow bands under feathers. Long pieces of down have been left at the…
Three handmade arrows carved from wooden twigs, each with three split and trimmed shaft feathers bound to a notched end. All three arrows have sharpened tips and are painted with coloured bands: a) An arrow with red, green and yellow bands under feathers. Long pieces of down have been left at the bottom of the featers. b) An arrow with bands of red, blue, and red under the feathers. c) An arrow with bands of blue, red, blue,yellow, blue, red, and blue under the feathers, and with a red band at the tip.
A crudely made ashtray. The bowl has been hammered from a flat sheet of copper, and the rim left square. The ashtray has a split in the base and the rim is bent.
A crudely made ashtray. The bowl has been hammered from a flat sheet of copper, and the rim left square. The ashtray has a split in the base and the rim is bent.
An ashtray that is a short cylinder and is spanned by a cigarette rest. The outside is decorated with a raised floral design that is inset with glass and stone. The base is stamped “China”. One side is badly dented.
An ashtray that is a short cylinder and is spanned by a cigarette rest. The outside is decorated with a raised floral design that is inset with glass and stone. The base is stamped “China”. One side is badly dented.
A silver plated cigar ashtray with a glass insert bowl. The ashtray has a circular base with three bands arched over the bowl that support a two sided match box holder monogrammed with “P.A.M.” (Philip Augustus Moore).
A silver plated cigar ashtray with a glass insert bowl. The ashtray has a circular base with three bands arched over the bowl that support a two sided match box holder monogrammed with “P.A.M.” (Philip Augustus Moore).
A circular copper ashtray that is bowl shaped and is lined with blue enamel. There are three brass cigarette rests that are spaced evenly around the top rim. There is slight pitting on the base and the inside enamel is chipped. “CHINA” is stamped on the base.
A circular copper ashtray that is bowl shaped and is lined with blue enamel. There are three brass cigarette rests that are spaced evenly around the top rim. There is slight pitting on the base and the inside enamel is chipped. “CHINA” is stamped on the base.
A square ashtray with a white ceramic tile for a base. The tile is decorated with a blue rabbit. The sides of the ashtray are made of shaped sheet metal with four evenly spaced cigarette rests, one per edge. The tile is chipped and the metal is rusted.
A square ashtray with a white ceramic tile for a base. The tile is decorated with a blue rabbit. The sides of the ashtray are made of shaped sheet metal with four evenly spaced cigarette rests, one per edge. The tile is chipped and the metal is rusted.