31 individual Moiré filters in wax paper envelopes with instruction manuals in a repurposed Ansco Photographic Paper box. Filters are in various patterns and shapes and are coloured either black, pink, yellow, or teal.Moiré filters were used in developing photographs to create textured blocks of co…
31 individual Moiré filters in wax paper envelopes with instruction manuals in a repurposed Ansco Photographic Paper box. Filters are in various patterns and shapes and are coloured either black, pink, yellow, or teal.Moiré filters were used in developing photographs to create textured blocks of colour in order to enhance printed images, usually in advertisement. Moiré patterns are made by overlapping fine-line patterns (such as pinstripes) that are offset from each other at a slight angle - these patterns will appear and disappear depending on the resolution they appear in.
Rectangular shiny silver metal box with a lift-off lid. Contents of the box include two glass vignettes with edges wrapped in pale brown binding tape [one has a small tab on one side], a yellow-tinted “KODAK SERIES VI ADAPTER RING” mounted in metal, a circular black plastic “CRAFTMEN’S GUILD PICTOR…
Rectangular shiny silver metal box with a lift-off lid. Contents of the box include two glass vignettes with edges wrapped in pale brown binding tape [one has a small tab on one side], a yellow-tinted “KODAK SERIES VI ADAPTER RING” mounted in metal, a circular black plastic “CRAFTMEN’S GUILD PICTORAL CONTROL” fixture with a clear central hole, a thin grey cardboard Kodak box with a strip of paper adhesive tape wrapped around the box holding the lid closed that has “2 1/4 x 3 1/4 Glasses for A - Assembly Enlarger” in blue ink [most likely written by Morant], a second thin Kodak cardboard box with a paper adhesive tape on the lid that has “MASKS for PRECISION A” written in black ink [probably by Morant] that contains wax paper envelopes of coloured celluloid masks, and a paper Canadian Pacific Railway envelope that contains wax paper envelopes of coloured celluloid masks.
A black plastic double lens reflex Bedford Flex camera. The camera takes 4x4 exposures but due to its poor quality was not considered a real twin lens reflex camera by many professional photographers - it would be better suited for amateurs or as a toy. The camera has the pop-open top viewfinder, t…
A black plastic double lens reflex Bedford Flex camera. The camera takes 4x4 exposures but due to its poor quality was not considered a real twin lens reflex camera by many professional photographers - it would be better suited for amateurs or as a toy. The camera has the pop-open top viewfinder, two front-facing lenses with a black rubber lens cap, and a plastic carry strap attached to two metal brackets on either side of the camera.
Square black plastic tool with a clear window in the top and a translucent window on an angle at the front - visible through the top window is an angled mirror, not accessible, so that light can move through the tool. Housed in a cardboard box with several scratched out things written on the lid - …
Square black plastic tool with a clear window in the top and a translucent window on an angle at the front - visible through the top window is an angled mirror, not accessible, so that light can move through the tool. Housed in a cardboard box with several scratched out things written on the lid - only “staples” is legible. The tool could be used to preview slides/negatives by placing them on the translucent window and placing the tool underneath a direct light source such as a lamp. Alternatively, the tool could be used as a precise light focus magnifier during photograph development/enlargement.
A Mamiya twin reflex lens with a plastic lens cap housed in a leather case lined with red velvet. The lens has a solid metal mount where it fits into a camera. Both lenses are 1:4.5 f=18cm.The case has a leather hinged lid, leather brackets on both short sides where a strap could be attached, and i…
A Mamiya twin reflex lens with a plastic lens cap housed in a leather case lined with red velvet. The lens has a solid metal mount where it fits into a camera. Both lenses are 1:4.5 f=18cm.The case has a leather hinged lid, leather brackets on both short sides where a strap could be attached, and is held closed with a snap on a leather tab.
A Mamiya C3 twinflex camera with extra lens. The camera is mostly metal with a pop-open top that exposes the viewfinder, multiple dials on the right-hand side, a crank on the left, and large black plastic knobs at the bottom near the front to extend or retract the lens plate. The back panel of the …
A Mamiya C3 twinflex camera with extra lens. The camera is mostly metal with a pop-open top that exposes the viewfinder, multiple dials on the right-hand side, a crank on the left, and large black plastic knobs at the bottom near the front to extend or retract the lens plate. The back panel of the camera pops open in order to reload the film [empty] and attached to both sides near the top are brackets where the leather carry strap is attached. On the top of the lid is a piece of masking tape with “VC” written in black ink.The spare lens is an alternate to the one on the camera and the only difference is the lens cap.
An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
An Asahi Pentax 6x7 camera fitted with “Super-Multi-Coated TAKUMAR” lens. The main body of the camera has four small round metal protrusions on the front where accessories such as a flash can be attached. There appears to still be a roll of film inside the camera.
Black hard-sided travel case with corner brackets and reinforcing along all edges - hinged lid held closed with three metal clasps. Below the clasps on the front of the case is a wooden handle, from which hangs a wooden travel tag with Nicholas Morant’s address printed in red ink. Throughout the ex…
Black hard-sided travel case with corner brackets and reinforcing along all edges - hinged lid held closed with three metal clasps. Below the clasps on the front of the case is a wooden handle, from which hangs a wooden travel tag with Nicholas Morant’s address printed in red ink. Throughout the exterior of the case are various travel stickers and labels, mostly faded and/or torn. The interior of the case is lined with patterned blue and white paper.Contents of the case include:B : two silver metal brackets most likely used to hold/mount a camera flash or light on a tripod - each housed in its own purple fabric bag with “Seagram’s” embroidered on them. Both brackets have small rectangular paper adhesives attached to them - one has “460” written in black ink and the other has “370” written in black ink. C : three metal clamps of various sizes - one housed in a red fabric bag.D : a tripod chain with three open hooks housed inside a metal Kodak developer can with a plastic lid - on the lid is a paper adhesive with “TRIPOD CHAIN” written in black ink.E : three power cords of various lengths - one has a paper adhesive tag that reads “GRAFLEX FLASH” in black ink.F : a flash handle and two alternative parts - all three are made from silver metal and have various plugs and black plastic pieces. G : coiled cables in a black and yellow cardboard box - on the lid is a paper adhesive label with “CABLES” written in black ink - “PHOTOEYE” is also written on the sides of the lid in black ink. H : coiled cables in a white and grey cardboard box - on side of the lid is a paper adhesive label with “TRIPPER” written in black in - “TRIPPER” is also written directly on the lid of the box in black.I : ballheads and screw boards in a beige cardboard box with two paper adhesive labels on the lid - one reads “BALLHEADS 1/4 SCREW BOARD” and the other has Nicholas Morant’s address.J : a handheld chalkboard sign with “MORANT” painted in yellow at the top - the remainder of the board is divided in two, the top section has “P” in the top left corner and the bottom section has “M” in the top left corner. K : handheld digital flash and accessories in a fitted Styrofoam box - taped to the outside of the lid is a “Braun 2000 VarioComputer” instruction manual in a plastic sleeve.
Black hard-sided travel case with silver metal brackets on the corners and, two metal clasps holding the hinged lid closed, a central slide lock [unlocked], metal loop attachments on both short sides [possibly for a carry strap], and a leather handle attached to the lid with metal loops. The exteri…
Black hard-sided travel case with silver metal brackets on the corners and, two metal clasps holding the hinged lid closed, a central slide lock [unlocked], metal loop attachments on both short sides [possibly for a carry strap], and a leather handle attached to the lid with metal loops. The exterior of the case has the remnants of several different shipping labels [mostly on the front], a piece of masking tape along the right-hand side of the lid has “PENTAX 6x7” written in blue ink, and “FRAGILE” stenciled in white along the lid. The interior is lined in blue velvet - the body of the case is divided into two compartments and there are velvet-covered spacers in the larger compartment and in the lid to keep contents from shifting. Inside the case is a fabric camera strap still in its original plastic packaging, a wood and metal handle camera attachment in its original Asahi cardboard box [the box has several strips of masking tape throughout, none of which keep it closed], an Asahi Pentax lens hood in a black leather pouch, and a screw.
Polaroid Automatic 103 Land Camera in a grey plastic case and a black fabric carry strap attached to loops built in to the top of the camera. The cover folds down to expose the camera lens - this front cover can be detached and has a spring-controlled wire frame that holds the instruction manual in…
Polaroid Automatic 103 Land Camera in a grey plastic case and a black fabric carry strap attached to loops built in to the top of the camera. The cover folds down to expose the camera lens - this front cover can be detached and has a spring-controlled wire frame that holds the instruction manual in place. The camera itself folds out from the plastic casing - the viewfinder and focus calculator folds up on a hinge and clicks into place with a magnet; the lens extends out on fabric bellows and is released by pulling the lever numbered “1” up - the bellows can be retracted by pressing down on the crossbar; the back panel can open by sliding a small lever on the bottom.
Two black and silver metal Graphic 4x5 Polaroid camera backs. Fit into the back of a standard 4x5 camera, they house the Polaroid film that is exposed by sliding an opaque screen open and closed again. Each Polaroid also has a leather handle on one end and fold completely open to expose the film co…
Two black and silver metal Graphic 4x5 Polaroid camera backs. Fit into the back of a standard 4x5 camera, they house the Polaroid film that is exposed by sliding an opaque screen open and closed again. Each Polaroid also has a leather handle on one end and fold completely open to expose the film compartment inside - developed photographs are pulled through one side.
Black metal folding stereoscope. The rectangular frame has two square openings that allow light to pass through the image, which is inserted into tracks on the inside of the frame. Opposite the rectangular frame is a rounded frame containing two round glass lenses that also has a rounded cut-out wh…
Black metal folding stereoscope. The rectangular frame has two square openings that allow light to pass through the image, which is inserted into tracks on the inside of the frame. Opposite the rectangular frame is a rounded frame containing two round glass lenses that also has a rounded cut-out where the nose can fit. Between the two frames is an adjustable plate, allowing the image to be moved further from or closer to the viewer in order to be brought into focus. The stereoscope folds in on itself and latches with a small gold flat-top peg that fits into a small slot on the lens frame.
Small round silver metal 5 cm camera lens attachment with small horizontal runners that slide into the base on the tops of most cameras. This lens is most likely a specifically-adjusted sight for a larger lens, based on the small size and the presence of a black rectangle printed on the glass of th…
Small round silver metal 5 cm camera lens attachment with small horizontal runners that slide into the base on the tops of most cameras. This lens is most likely a specifically-adjusted sight for a larger lens, based on the small size and the presence of a black rectangle printed on the glass of the lens.The box consists of a white cardboard body with a partially torn housing inside for the lens that slides horizontally into a green cardboard sleeve. The green section has a narrow strip of adhesive tape around it, blocking most of the text on both the top and bottom - a small white rectangular price tag with “10.20” written on it in blue ink also obscures the text on the box.
Three empty boxes for one Transparent Film Cartridge meant to be used in the Kodak No. 2 Bullet Camera - each cartridge could take twelve 3 1/2 inch exposures. Each box has a black and white paper label adhered across the top of the lid with the product and manufacturer details printed throughout -…
Three empty boxes for one Transparent Film Cartridge meant to be used in the Kodak No. 2 Bullet Camera - each cartridge could take twelve 3 1/2 inch exposures. Each box has a black and white paper label adhered across the top of the lid with the product and manufacturer details printed throughout - on the bottom is a white and red paper label with a warning to develop the film before May 1st, 1900. All three boxes have various kinds of writing throughout the exteriors - two have notes written on one long side in pencil by Russell Robb [most likely Catharine’s father].
A black plastic 35mm film loader with orange knobs and cranks. It is tear dropped shaped. On one side of the loader is an orange crank and on the other side is multiple parts. There is an orange knob that turns, an orange latch that twists back and forward to lock the bottom of the film loader in p…
A black plastic 35mm film loader with orange knobs and cranks. It is tear dropped shaped. On one side of the loader is an orange crank and on the other side is multiple parts. There is an orange knob that turns, an orange latch that twists back and forward to lock the bottom of the film loader in place, an orange knob with numbers from 0 to 35 (in increments of 5), cut into the side is a window to a dial with white numbers on black text, there is a larger orange knob which twists that features orange text reads “OPEN ONLY TO REPLACE BULK FILM”, and and another black flat circle that twists with black text that reads “TO INSERT CASSETTE”, two solid triangles pointed up, and “TO LOAD FILM”. On the bottom of the where the film canister is loaded is a box with text inside, it reads “COMPUTROL 35 mm film loader RESTEM Ltd. T.A. Made in Israel”. There is an instruction manual with the film loader which features lots of text, sketches of the loader, and diagrams of use.
Wooden printing tongs. Two pieces of flat wood slotted into a solid wood cylinder with enough give in the wood to allow the end of the tongs to touch. On one side of the tongs black text is printed, it reads “DEVELOPER — REXO PRINT TONGS” and a small logo for Burke & James Photo Supplies.
Wooden printing tongs. Two pieces of flat wood slotted into a solid wood cylinder with enough give in the wood to allow the end of the tongs to touch. On one side of the tongs black text is printed, it reads “DEVELOPER — REXO PRINT TONGS” and a small logo for Burke & James Photo Supplies.
A folding wooden camera with gold metal features. When folded the main body of the camera lens is set into the centre of the wooden frame surrounded by a circular opening with a metal circle that is able to twist [where the tripod would attach]. The camera opens from a hinge to fold out, releasing …
A folding wooden camera with gold metal features. When folded the main body of the camera lens is set into the centre of the wooden frame surrounded by a circular opening with a metal circle that is able to twist [where the tripod would attach]. The camera opens from a hinge to fold out, releasing the black bellows, the front with the camera lens is on hinges that allow the camera lens to be propped up from the front frame that protected it. There are hinges to secure the position of the lens, there is also knobs and gears to operate the camera and a fibre cord with a metal ring attached to the bottom of the lens. On the base of the frame (which protects the lens when folded), features knobs that can twist to extend the length of the bellows, this part of the frame is inlaid in the base. On the back of the camera is another frame with a glass insert that is held in place with a clasp and on hinges. Along the side of this part of the camera are knobs on hinges to support when the bellows are extended further and inlaid is a white circle label which reads “THE Sandringham REG.” in brown text.
A white tray with different coloured speckles all over with a pouring spout at one corner. On the side with the pouring spout is a stamp that reads “GRANITINE” in an outer ring of a circle with a symbol or logo in the middle.
A white tray with different coloured speckles all over with a pouring spout at one corner. On the side with the pouring spout is a stamp that reads “GRANITINE” in an outer ring of a circle with a symbol or logo in the middle.
Hand held 8 mm movie camera; generally black body; lens with "Chinon F:1.1 f = 13 mm"; viewfinder andbutton above lens; manufacturer's name and model; handgrip with shutter trigger and lock lever; body door and release button right hand side; film loading instructions inside plus gate, drive mechan…
Hand held 8 mm movie camera; generally black body; lens with "Chinon F:1.1 f = 13 mm"; viewfinder andbutton above lens; manufacturer's name and model; handgrip with shutter trigger and lock lever; body door and release button right hand side; film loading instructions inside plus gate, drive mechanism; eyepiece, battery check button on back; feet/meters counter left hand side; filter screw on top; tripod mount on bottom. Made in Japan.